-
Graco 3A0465C - page 1
Instructions G-For ce Dir ect-Drive Pr essur e W asher 3A0465C EN -For high pressure water c leaning- -For outdoor use only- IMPORT ANT SAFETY INSTRUCTIONS Read all warnings and instructions in this manual. SA VE THESE INSTRUCTIONS. proven quality . leading technology . Model Horse Power and Motor Brand Maximum W orking Pressur e PSI MPa bar 2525 1 ...
-
Graco 3A0465C - page 2
2 3 The following warnings are for the setup, use, grounding, maintenance, and r epair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to pr ocedure-spe- cic risks. When these symbols appear in the body of this manual, refer back to these W arnings. Product- specic hazard symbols an ...
-
Graco 3A0465C - page 3
4 5 • Do not direct spray on or into electrical installations of any kind! This includes electrical outlets, light bulbs, fuse boxes, transformers, etc. Severe electrical shock may occur . • Even after you shut off the unit, ther e is high pressur e water left in the pump, hose and gun until you release it by triggering the gun. Befor e removin ...
-
Graco 3A0465C - page 4
6 7 Component Identication Item Description 1. Deter gent Strainer 2. Deter gent Hose 3. W ater Inlet 4. W ater Inlet Strainer 5. W ater Outlet 6. Decal - W arning/Caution/Operation 7. Oil Sight Glass 8. Pump 9. Adjustable Unloader Knob 10. Decal - Caution: Risk Of Fire 11. Decal - W arning: Risk Of Bur ns 12. Engine 13. Thermal Relief V alve 14 ...
-
Graco 3A0465C - page 5
8 9 INST ALLA TION & PREP ARA TION INSTRUCTIONS Engine Fuel T ank Review “Fire & V entilation Precautions” pg. 4, before fueling. Locate the Safety Decals on your unit and heed their warnings. A minimum of 86 octane fuel is recommended for use with this unit. Do not mix oil with gasoline. Purchase fuel in quantities that may be used wit ...
-
Graco 3A0465C - page 6
10 11 OPERA TING INSTRUCTIONS Priming the Pump It is essential to prime the pump on initial start-up and each time the water supply is disconnected from the unit after initial use. 1. Lay the high pressure hose out to remove any loops. W ater ow will constrict the hose, creating tight loops if the hose is not straight. Note: The nozzle assembly ...
-
Graco 3A0465C - page 7
12 13 OPERA TING INSTRUCTIONS Start-Up Refer to the “Safety Precautions” pgs. 3-5 befor e start - ing the unit. Locate the Safety Decals on your unit and heed their warnings. Never look directly into the nozzle. High pr essure water creates a risk of sever e injury . 1. With the gun locked in the “OFF” position, point the trigger gun away f ...
-
Graco 3A0465C - page 8
14 15 STORAGE & MAINTENANCE INSTRUCTIONS Engine The engine instructions that accompany your unit detail specic procedur es for maintenance of the engine. Fol - lowing the engine manufacturer’ s recommendations will extend engine work life. Pump The pump oil must be changed after the rst 25 hours of operation on all units. Once the initi ...
-
Graco 3A0465C - page 9
17 T roubleshooting Engine will not start. V arious engine pr oblems. Refer to the engine manual accom- panying your unit. Unit components are fr ozen. Allow to thaw . If any part of the unit becomes frozen; excessive pr es - sure may build up in the unit which could cause the unit to burst result- ing in possible serious injury to the operator or ...
-
Graco 3A0465C - page 10
18 19 PUMP SERVICE: 2730 MODEL PRESSURE W ASHERS Repair kits are available. See the Parts List, page 28 (2730B). For the best results, use all parts in kits. Follow Shutdown Procedur e, page 13, to relieve system pressur e. • Drain and rell pump after 25 hours of operation. V alves For a set of six valves, order V alve Assembly Kit 804402. 1. ...
-
Graco 3A0465C - page 11
20 21 Pr essure W asher - Parts 262292- Model 2525DD Pr essure W asher - Parts 262292- Model 2525DD DESCRIPTION P ART # QTY 1 GROMMET 16E489 5 2 NOZZLE, 0° 805535 1 - NOZZLE, 15° 805536 1 - NOZZLE, 40° 805538 1 - NOZZLE, DETERGENT 805634 1 3 DECAL - G-FORCE 2525DD 16E123 1 4 BASEPLA TE 16E506 1 5 p DECAL - WARNING/CAUTION (E/S/F) N/A 1 6 HANDLE ...
-
Graco 3A0465C - page 12
22 23 Pump Assembly - Parts - Series A 24E735 (for use with Model 2525DD) Pump Assembly - Parts 24E735 (for use with Model 2525DD) DESCRIPTION P ART # QTY KIT , REP AIR, V AL VES 24E736 6 INCLUDES 1 KIT , REP AIR, PLUNGER 24E737 3 INCLUDES 2 KIT , REP AIR, OIL SEAL 24E738 3 INCLUDES 3 KIT , REP AIR, UNLOADER 24E739 1 INCLUDES 4 KIT , REP AIR, P ACK ...
-
Graco 3A0465C - page 13
24 25 Pump Assembly - Parts - Series B 24R713 (for use with Model 2525DD) Pump Assembly - Parts 24R713 (for use with Model 2525DD) DESCRIPTION P ART # QTY KIT , REP AIR, V AL VES 24R715 6 INCLUDES 1 THERMAL RELIEF V AL VE 117759 1 INCLUDES 2 FIL TER, INLET 801112 1 INCLUDES 3 KIT , REP AIR, P ACKINGS 24R718 3 INCLUDES 4 KIT , REP AIR, OIL SEAL 16V2 ...
-
Graco 3A0465C - page 14
26 27 Pr essure W asher - Parts 262293- Model 2730DD Pr essure W asher - Parts 262293- Model 2730DD DESCRIPTION P AR T# QTY 1 GROMMET 16E489 5 2 NOZZLE, 0° 805535 1 - NOZZLE, 15° 805536 1 - NOZZLE, 25° 805537 1 - NOZZLE, 40° 805538 1 - NOZZLE, DETERGENT 805634 1 3 DECAL - G-FORCE 2730DD 16E124 1 4 BASEPLA TE 16E506 1 5 p DECAL - WARNING/CAUTION ...
-
Graco 3A0465C - page 15
28 29 Pump Assembly - Parts 244749 (for use with Model 2730DD) Pump Assembly - Parts 244749 (for use with Model 2730DD) DESCRIPTION P ART # QTY KIT , REP AIR, V AL VES 804402 6 INCLUDES 24 KIT , REP AIR, OIL SEAL 804033 3 INCLUDES 36 KIT , REP AIR, PLUNGER 804011 3 INCLUDES 37 KIT , REP AIR, P ACKINGS 804037 3 INCLUDES 32, 33, 34, 35 KIT , REP AIR, ...
-
Graco 3A0465C - page 16
30 31 Pr essure W asher - Parts 262294- Model 3030DD 262295- Model 3540DD Pr essure W asher - Parts 262294- Model 3030DD 262295- Model 3540DD DESCRIPTION P ART # QTY 1 GROMMET 16E489 5 2 NOZZLE (3030DD), 0° 805539 1 - NOZZLE (3030DD), 15° 805540 1 - NOZZLE (3030DD), 25° 805541 1 - NOZZLE (3030DD), 40° 805542 1 - NOZZLE (3540DD/3030DD), DETERGEN ...
-
Graco 3A0465C - page 17
32 33 Pump Assembly - Parts 24E753 (for use with Model 3030DD) 24E750 (for use with Model 3540DD) Pump Assembly - Parts 24E753 (for use with Model 3030DD) 24E750 (for use with Model 3540DD) DESCRIPTION P ART # QTY KIT , REP AIR, V AL VES 804402 6 INCLUDES 10 KIT , REP AIR, OIL SEAL 24E744 3 INCLUDES 18 KIT , PLUNGER 24E745 3 INCLUDES 22 KIT , REP A ...
-
Graco 3A0465C - page 18
34 35 T echnical Data Model 2525 Model 2730 Model 3030 Model 3540 W orking Pr essure Range 2250-2300 psi 2600-2700 psi 2800-2900 psi 3400-3500 psi Operating Pressur e 2275 psi 2650 PSI 2850 PSI 3450 psi Maximum W orking Pr essure 2500 psi 2700 psi 3000 psi 3500 psi Engine Size 160 cc 200 cc 270 cc 390 cc Maximum Delivery 2.3 gpm (8.7 l/mn) 2.4 gpm ...
-
Graco 3A0465C - page 19
36 Graco Standar d W arranty Graco warrants all equipment refer enced in this document which is manufactured by Graco and bearing its name to be free fr om defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a ...
¿Tienes una pregunta acerca de Graco 3A0465C?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Graco 3A0465C, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Graco 3A0465C probablemente compartirá una forma de solucionarlo.