-
Philips 0150-0241B - page 1
x User Manual 0150-0241 Phillips ProBridge ...
-
Philips 0150-0241B - page 2
Philips ProBridge 2 0150 - 0241B © 2004 GE Security All Rights Reserved. Any GE Security software su pplied with GE Security products is proprietary and furnished under license and can be used or copied only in accordance with the terms of such license. This document contains proprietary information that is protected by copyright. No part of this ...
-
Philips 0150-0241B - page 3
Philips ProBridge 3 0150 - 0241B Table of Contents 1 Philips ProBri dge ........................................................... 4 1.1 Philips ProBridge Description .................................................................. 4 1.2 Compatibility ............................................................................................. 4 ...
-
Philips 0150-0241B - page 4
Philips ProBridge 4 0150 - 0241B 1 Philips ProBridge 1.1 Philips ProBridge Description The Kalatel CBR - PB2 - PHILIPS is a specific ProBridge unit for interfacing the DVMRe family of digital video multiplex/recorders and providing local keyboard control via a CBR - KB3 or KTD - 405 keypad to a Philips AutoDome. Kalatel Components: (1) CBR - PB2 - ...
-
Philips 0150-0241B - page 5
Philips ProBridge 5 0150 - 0241B Temperature: Observe the unit’s ambient temperature specifications when choosing a location for the unit. Extremes of heat or cold beyond the specified operating temperature limits may cause the unit to fail. Do not install this unit on top of other hot equipment. Moisture: Do not expose the unit to rain or moistu ...
-
Philips 0150-0241B - page 6
Philips ProBridge 6 0150 - 0241B 1.5 Installation Steps Summary Carefully and completely read the manuals for each piece of equipment before attempting to install and connect this equipment. Before you start connecting other optional accessory equipment to your system, make sure that all, power, video, VCR, and monitor connections are completed, an ...
-
Philips 0150-0241B - page 7
Philips ProBridge 7 0150 - 0241B 1.6 Connection Diagrams This drawing depicts one Philips AutoDome connected via an RS485/422 network to a Kalatel DVMReTriplex unit, that provides remote PTZ control over Ethernet via WaveReader software, and a CBR - KB3 or KTD - 405 keypad. DVMRe Triplex 4310-0034B Cable 4310-0034B Cable 4310-0047B Cable RJ45 RJ45 ...
-
Philips 0150-0241B - page 8
Philips ProBridge 8 0150 - 0241B 2 Cable Specifications ProBridge to Kalatel Unit Cable (RS - 485) Part Numb er : 4310 - 0034B Communication Type: RS - 485 Connector Type: RJ45 ,RJ45 Cable Required: 5 Foot RJ45 to RJ45 Triplex RS485 Cable (Supplied). Connects ProBridge to Triplex and CBR - KB3 or KTD - 405 keypad. Pin 8: Brown Pin 7: Brown/White Pi ...
-
Philips 0150-0241B - page 9
Philips ProBridge 9 0150 - 0241B 3 Troubleshooting If you are unable to verify control of the PTZ camera, please do the following: 1. Check t hat each device is properly powered. 2. Check that all cables and cable connections are correct. 3. Verify that the Dome addresses and Unit ID are correct. 4. If the interface still does not work correctly co ...
-
Philips 0150-0241B - page 10
Philips ProBridge 10 0150 - 0241B 4 Unit Settings 4.1 Configuring P roBridge Jumpers The unit ships from the factory with the correct settings for most applications and should not require the installer to open the unit and change the jumper settings. However, for trouble shooting purposes we have included the default jum per settings. Opening The P ...
-
Philips 0150-0241B - page 11
Philips ProBridge 11 0150 - 0241B Default Jumper Settings The default jumper settings are listed below: PIN # DEFAULT STATUS JP2 RS485 Position JP3 RS485 Position JP4 RS485 Position JP5 RS232 Position P6 Pin 1 Not Installed P6 Pin 2 Not Installed P6 Pin 3 Installed P6 Pin 4 Not Installed P6 Pin 5 Not Installed P6 Pin 6 Not Installed P6 Pin 7 Not In ...
-
Philips 0150-0241B - page 12
Philips ProBridge 12 0150 - 0241B 5 Specifications Physical Housing Plastic enclosure. Dimensions (W x L x H) 1.5 x 4.4 x 3.3 in. (38 x 112 x 84 mm) Nominal Weight 4.8 oz (136 g) Shippin g Weight 1 lb (453 g) packaged, including the external AC power supply and manual. Color Light gray. Environmental Temperature 0 to 40 ° C, operating. Relative Hu ...
-
Philips 0150-0241B - page 13
Philips ProBridge 13 0150 - 0241B 6 Appendix 6.1 RS - 485 Addressing and Connections The Philips ProBridge (CBR - PB2 - PHILIPS) is not an addressable device and requires no user settings. The device simply acts as an interpreter, translating the remote telemetry commands into a format useable by the P/T/Z controller. Each camera input, whether a f ...
-
Philips 0150-0241B - page 14
Philips ProBridge 14 0150 - 0241B 6.2 Philip AutoDome Addressing The Philips AutoDome ca n be addressed from 1 to 9998. The CBR - PB2 - PHILIPS ProBridge can control camera addresses from 1 to 9998, however the CBR - KB3 keyboard can control cameras from 1 to 1024. WaveReader software can only control cameras from 1 to 8160. Camera Mapping RS485 Ne ...
-
Philips 0150-0241B - page 15
Philips ProBridge 15 0150 - 0241B RS485 Network Address Camera Address AutoDome Address 025 1 – 32 0769 – 0800 026 1 – 32 0801 – 0832 027 1 – 32 0833 – 0864 028 1 – 32 0865 – 0896 029 1 – 32 0897 – 0928 030 1 – 32 0929 – 0960 031 1 – 32 0961 – 0992 032 1 – 32 0993 – 1024 -- -- -- 255 1 – 32 8129 – 8160 Philips Au ...
-
Philips 0150-0241B - page 16
Philips ProBridge 16 0150 - 0241B 9 2 5 13 2 9 5 2 1 1 1 7 10 2 6 14 3 0 6 2 2 2 1 8 11 2 7 15 3 1 7 2 3 3 1 9 12 2 8 16 3 2 8 2 4 4 2 0 AL T { } F B C D E AUX 2 AUX 1 AUX 3 AUX 4 # ALT Key Shift Key Aux Keys Preset Key Keyboard Layout 6.4 AUX Operations The remote keyboard has 8 AUX function keys that can be assigned to do some Philips AutoDome fe ...
-
Philips 0150-0241B - page 17
Philips ProBridge 17 0150 - 0241B Pre set Setup for CBR - KB Keyboard To set a new Preset position: 1. Move the camera to the desired position by using the joystick or arrow keys. 2. Press Preset key twice. The LCD will display: “Set Preshot Number?” Select camera key number 1 to 16 (17 to 32 with Sh ift key turned on) to set the preset number ...
-
Philips 0150-0241B - page 18
Philips ProBridge 18 0150 - 0241B 7 Warranty Information 7.1 Factory Service If the unit requires factory service, contact the dealer who supplied the unit to you for the correct procedures on returning the unit to the factory or the nearest factory service center. If the dealer is not available, contact the manufacturer of the unit as de tailed be ...
-
Philips 0150-0241B - page 19
Philips ProBridge 19 0150 - 0241B Note: Customers requesting an estimate prior to repair will be notified by phone. If they cannot be reached, they will be notified by fax. If we are unable to reach the contact person for repair authorization after one phone attempt and two fax attempts, the equipment will be returned without being repaired. We wil ...
¿Tienes una pregunta acerca de Philips 0150-0241B?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips 0150-0241B, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips 0150-0241B probablemente compartirá una forma de solucionarlo.