-
TP-Link TD-8817 - page 1
TD-8817 ADSL2+ Modem Router Rev: 2.0.2 1910010599 ...
-
TP-Link TD-8817 - page 2
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ ...
-
TP-Link TD-8817 - page 3
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation. This equipment ge nerates, uses and can radiate radio frequency energy and, if ...
-
TP-Link TD-8817 - page 4
Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If y ou need service, please contact us. Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE ES FI FR GB GR HU IE IT LT LV MT NL NO PL PT RO RU SE SK TR UA ...
-
TP-Link TD-8817 - page 5
TP-LINK TECHNOLOGIES CO., LTD DECLARA TION OF CONFORMITY For the following equipment: Product Description: ADSL2+ Modem Router Model No.: TD-8817 T rademark: TP-LINK We declare under our own respon sibility that the above products satisfy all the technical regulations applicable to the product wi thin the scope of Council Directives: Directives 200 ...
-
TP-Link TD-8817 - page 6
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Product Overview ..................................................................................... ...
-
TP-Link TD-8817 - page 7
4.5.6 CWMP ............................................................................................................................ 45 4.6 Maintenance ............................................................................................................ 45 4.6.1 Administration .............................................................. ...
-
TP-Link TD-8817 - page 8
TD-8817 ADSL2+ Modem Router User Guide 1 Package Contents The following items should be found in your package: One TD-8817 ADSL2+ Modem Router One Power Adapter for TD-8817 ADSL2+ Modem Router Quick Installation Guide One RJ45 cable One USB cable Two RJ11 cables One ADSL splitter One Resource CD , including: This ...
-
TP-Link TD-8817 - page 9
TD-8817 ADSL2+ Modem Router User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-8817 ADSL2+ Modem Router. 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. TD-8817 connects to an Ethernet LAN or com puters via standard Ethernet ports. The ADSL c ...
-
TP-Link TD-8817 - page 10
TD-8817 ADSL2+ Modem Router User Guide 3 Built-in DHCP server. Built-in firewall, supports IP/MAC filter, Application filter and URL filter. Supports Virtual Server, DMZ host and IP Address Mapping. Supports Dynamic DNS, UPnP and Static Routing. Supports system log and flow Statistics. Supports firmware upgrade and Web manag ...
-
TP-Link TD-8817 - page 11
TD-8817 ADSL2+ Modem Router User Guide 4 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs are located on the front panel, they indicate the device’ s working status . For details, please refer to LED Explanation . LED Explan ation: Name Status Indication On The modem router is powered on. Power Off The modem router is off. ...
-
TP-Link TD-8817 - page 12
TD-8817 ADSL2+ Modem Router User Guide 5 everything have been input correctly. Refer to 4.1.1 Device Info and 4.3.1 Internet for more information. 2.2 The Back Panel Figure 2-2 ON/OFF : The switch for the power. POWER : The Power plug is where yo u will connect the power adapter. USB : Connect with your computer’s USB interface. L ...
-
TP-Link TD-8817 - page 13
TD-8817 ADSL2+ Modem Router User Guide 6 the other end to a standard electrical outlet. Last Step : Check the line connection to see if ev erything is ready. Power up finally. Figure 2-3 ...
-
TP-Link TD-8817 - page 14
TD-8817 ADSL2+ Modem Router User Guide 7 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-881 7 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click the Start menu on your desktop ...
-
TP-Link TD-8817 - page 15
TD-8817 ADSL2+ Modem Router User Guide 8 Figure 3-3 Step 4: Configur e the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ...
-
TP-Link TD-8817 - page 16
TD-8817 ADSL2+ Modem Router User Guide 9 Note: You can c onfigure the PC to get an IP address aut omatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above. Now, you can run the Ping command in the comm and prompt to verify the network connection. Please click the Start me ...
-
TP-Link TD-8817 - page 17
TD-8817 ADSL2+ Modem Router User Guide 10 obtain the drivers from the provided CD , or download from our website. ( http://www.tp-link.com ) USB Drive installation procedures Step 1: Please connect your PC to the Router th rough the USB port at first, then insert the provided CD into your CD-ROM drive. The aut orun.exe will automatically run and cl ...
-
TP-Link TD-8817 - page 18
TD-8817 ADSL2+ Modem Router User Guide 11 Figure 3-9 Note: 1) All of the above settings are under windows XP. 2) If you want to pull out the USB device y ou must disconnect the network of USB first. 3) In the Vista operating sy stem, maybe the “Unknown Device” screen will pop up when you insert the USB cable of the Router to a computer, ple ...
-
TP-Link TD-8817 - page 19
TD-8817 ADSL2+ Modem Router User Guide 12 Figure 3-10 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see Figure 3-11 . Click the NEXT button. Figure 3-1 1 Step 2: Configur e the time for the Router, and then click the NEXT button. Figure 3-12 Step 3: Select the connection type to c onnect to the ISP (We select PPPoE/PPPoA ...
-
TP-Link TD-8817 - page 20
TD-8817 ADSL2+ Modem Router User Guide 13 Figure 3-13 Step 4: Configur e the following opti ons provided by your ISP: Username , Password , VPI , VCI and Connection Type . Then click NEXT . Figure 3-14 Step 5: Click NEXT to finish the Quick Start. Figure 3-15 ...
-
TP-Link TD-8817 - page 21
TD-8817 ADSL2+ Modem Router User Guide 14 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more abo ut this device and make use of its functions adequately, maybe you will get help from this chapter to configur e the advanced se ...
-
TP-Link TD-8817 - page 22
TD-8817 ADSL2+ Modem Router User Guide 15 Figure 4-2 4.1.2 System Log Choose “ Status → System Log ” menu, and you will be able to quer y the logs of the Router. ...
-
TP-Link TD-8817 - page 23
TD-8817 ADSL2+ Modem Router User Guide 16 Figure 4-3 The Router can keep logs of all traffic. Yo u can query the logs to find what happened to the Router. Click the CLEAR LOG button to clear the logs. Click the SAVE LOG button to save the logs. 4.1.3 Statistics Choose “ Status → Statistics ” menu, and you will be able to view the network traf ...
-
TP-Link TD-8817 - page 24
TD-8817 ADSL2+ Modem Router User Guide 17 Interface: You can select Ethernet and ADSL to view the corresponding network traffic over different ports. Select Ethernet , and you will see the statistics table as below. Statistics Table: Transmit Frames The frames transmitted over the Ethernet port. Transmit Multicast Frames The multicast frame ...
-
TP-Link TD-8817 - page 25
TD-8817 ADSL2+ Modem Router User Guide 18 4.2 Quick S t art Please refer to 3.3 Login . 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet and LAN . Figure 4-5 Click any of them, and you will be able to configure the corre sponding function. 4.3.1 Internet Choose “ Interface Setup → Internet ” menu, yo ...
-
TP-Link TD-8817 - page 26
TD-8817 ADSL2+ Modem Router User Guide 19 Figure 4- 6 ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In th is Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 di fferent virtual circuits from your ISP. You nee ...
-
TP-Link TD-8817 - page 27
TD-8817 ADSL2+ Modem Router User Guide 20 VCI: Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is reserved for well- known protocols). Pl ease input the value provided by your ISP. PVCs Summary: Click the button, you can view the summa ry information about the PVCs. QoS: Select th ...
-
TP-Link TD-8817 - page 28
TD-8817 ADSL2+ Modem Router User Guide 21 RIP2 format, the difference is that RIP2-M using Multicast, while RIP2-B using Broadcast format. Direction: Select this option to s pecify the RIP direction. None is for disabling the RIP function. Both means the ADSL Router will periodi cally send routing information and accept routing informati on, an ...
-
TP-Link TD-8817 - page 29
TD-8817 ADSL2+ Modem Router User Guide 22 Figure 4-9 Service name: Specify a name for the PPPoA/PPPoE connection for recognition. Username: Enter your username for your PPPoA/ PPPoE connection to identify and verify your account to the ISP. Password: Enter your password for your PPPoA/PPPoE connection. Encapsulation: For both PPPoA/ ...
-
TP-Link TD-8817 - page 30
TD-8817 ADSL2+ Modem Router User Guide 23 4. Bridge Mode If you select this type of connection, the modem can be configured to ac t as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two s egments of the same physical LAN. Figure 4-10 Note: After you finish the ...
-
TP-Link TD-8817 - page 31
TD-8817 ADSL2+ Modem Router User Guide 24 needed. The LAN IP address is private to y our internal networ k and cannot be seen on the Internet. IP Address: Enter the Router’s local IP Address, then you can access to the Web-based Utility via the IP Address, the default val ue is 192.168.1.1. IP Subnet Mask: Enter the Router’s Subnet Mask ...
-
TP-Link TD-8817 - page 32
TD-8817 ADSL2+ Modem Router User Guide 25 Starting IP Address: Enter the starting IP address for the DHCP server's IP assignment. Because the default IP address for the Rout er is 192.168.1. 1, t he default Start IP Address is 192.168.1.100 , and the Start IP Address must be 192.168.1.100 or greater, but smaller than 192.168.1.254. IP ...
-
TP-Link TD-8817 - page 33
TD-8817 ADSL2+ Modem Router User Guide 4.4 Advanced Setup Choose “ Advanced Setup ”, you can see the next submenus: Figure 4-14 Click any of them, and you will be able to configure the corre sponding function. 4.4.1 Firewall Choose “ Advanced Setup → Firew all ” menu, and you will see the next screen (shown in Figure 4-15 ). Figure 4-15 ? ...
-
TP-Link TD-8817 - page 34
TD-8817 ADSL2+ Modem Router User Guide 27 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-17 ). Figure 4-17 Destination IP Address: This parameter specifies the IP network address of the final destination. IP Subnet Mask: Enter the subnet mask for this destination. Gateway IP Address: Enter the IP address ...
-
TP-Link TD-8817 - page 35
TD-8817 ADSL2+ Modem Router User Guide 28 Virtual Circuit: Enter Virtual Circuit Index that you plan to setup for the NAT function. NAT Status: This field shows the current statu s of the NAT function for the current VC. You can go to the previous screen (shown in Figure 4-6 ) to activate the function. Number of IPs; This field is to sp ...
-
TP-Link TD-8817 - page 36
TD-8817 ADSL2+ Modem Router User Guide 29 Figure 4-20 Rule Index: The Virtual server rule index for this VC. You can specify 10 rules in maximum. All the VCs with single IP will use the same Virtual Server rules. Start & End port number: Enter the specific Start and End Po rt number you want to forward. If it is one port only, you can e ...
-
TP-Link TD-8817 - page 37
TD-8817 ADSL2+ Modem Router User Guide 30 Figure 4- 21 Figure 4-22 Rule Index: Select the Address Mapping Rule index fo r this VC. You can specify 8 rules in maximum. Rule Type: There are four types, one-to-one, Many-to-O ne, Many-to-Many Overload and Many-to-Many No-overload. Local Start & End IP: Enter the local IP Address you pla ...
-
TP-Link TD-8817 - page 38
TD-8817 ADSL2+ Modem Router User Guide 31 Step 5: After that, click SAVE to make the entry take effect. Other operations for the entries are as follows: Enter the index of assigned entry, click the DELETE button to delete the entry. Click the BACK button to return to the previous screen. Click the CANCEL button to cancel the configur ation which is ...
-
TP-Link TD-8817 - page 39
TD-8817 ADSL2+ Modem Router User Guide 32 Figure 4-23 QoS: Select this option to Activate/Deactivate the IP QoS on different types (IP ToS and DiffServ). Summary: Click the button to view t he configurations of QoS. Rule: Configure the rules for QoS. If the traffic complies with the rule, then the Router will take the corresponding acti ...
-
TP-Link TD-8817 - page 40
TD-8817 ADSL2+ Modem Router User Guide 33 Protocol ID: Select one among TCP/UDP, TCP, UDP or ICMP protocols for the application. Vlan ID Range: Enter the Vlan range, then the rule will be effective to the selected Vlans. IPP/DS Field: Select the type of the action to assign the priority. When you select IPP/TOS, you can assign the prio ...
-
TP-Link TD-8817 - page 41
TD-8817 ADSL2+ Modem Router User Guide 34 Figure 4-24 1. Define VLAN Group Click Define VLAN Group in Figure 4-24 , you can define VLAN groups in the next screen (shown in Figure 4-25 ). Figure 4-25 VLAN Index: Select the VLAN index for this VC. You can specify 8 gr oups in maximum. VLAN ID: This indicates the VLAN group. ATM VCs: Selec ...
-
TP-Link TD-8817 - page 42
TD-8817 ADSL2+ Modem Router User Guide 35 2. Assign VLAN PVID for each Interface Click Assign VLAN PVID for each Interface in Figure 4 -24 , you can assign the PVID for each interface in the next screen (shown in Figure 4-26 ). Figure 4-26 PVID: Each physical port has a default VID ca lled PVID (Port VID). PVID is assigned to untagged frames or ...
-
TP-Link TD-8817 - page 43
TD-8817 ADSL2+ Modem Router User Guide 36 ADSL Type: Select the ADSL operation type wh ich your ADSL connection uses. 4.5 Access Management Choose “ Access Management ”, you can see t he next submenus: Figure 4-28 Click any of them, and you will be able to configure the corre sponding function. 4.5.1 ACL Choose “ Access Management → ACL ...
-
TP-Link TD-8817 - page 44
TD-8817 ADSL2+ Modem Router User Guide 37 4.5.2 Filter Choose “ Access Management → Filter ”, you can see the Filter screen (the default is IP/MAC Filter screen shown in Figure 4-30 ). The filtering feature includes IP /MAC Filter, Application Filter, URL Filter. The feature makes it pos sible for administrators to control user's access ...
-
TP-Link TD-8817 - page 45
TD-8817 ADSL2+ Modem Router User Guide 38 Note: If select PVC0~PVC7 as a interface, the filter will match the IP tr affic of WAN port with specified IPs (Source IP Address and Destination IP Address), If select LAN as a interface, the filter will match the IP traffic of LA N port with specified IPs. Direction: Select the direction for this ...
-
TP-Link TD-8817 - page 46
TD-8817 ADSL2+ Modem Router User Guide 39 rule for the example. Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then select the Interface “PVC0”, and select t he Direction “Both” for the first rule. Note: If you want to make the rule take ef fect, please select Ye s to active the rule. Step 3: Enter ...
-
TP-Link TD-8817 - page 47
TD-8817 ADSL2+ Modem Router User Guide 40 Other operation for the entries as shown in Figure 4-30 : Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry . Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, and then click the DELETE button to delete the entry. 4.5.2 ...
-
TP-Link TD-8817 - page 48
TD-8817 ADSL2+ Modem Router User Guide 41 Step 1: Select the “IP/MAC Filter” as the Filer Type Selection: Select the “MAC” as the Rule Type on the Filter screen (show in Figure 4-31 ). , Then you can configure the spec ific rule for the example. Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then selec ...
-
TP-Link TD-8817 - page 49
TD-8817 ADSL2+ Modem Router User Guide 42 Figure 4-32 Filter Type Selection: Select the Application Filter for the next configuration. Application Filter: Activate or deactivate the function. ICQ & MSN & YMSG & Real Audio/Video: Select Allow or Den y for these applications. If you select Allow, the Router will accept the app ...
-
TP-Link TD-8817 - page 50
TD-8817 ADSL2+ Modem Router User Guide 43 Filter Type Selection: Select the URL Filter fo r the next configuration. Active: Select “Yes” to make t he rule to take effect. URL Index: Select the index for the URL Filter entry. URL: Enter the URL for this URL Filter. URL Filter Listing: This displays the informati on about the ...
-
TP-Link TD-8817 - page 51
TD-8817 ADSL2+ Modem Router User Guide 44 a network, obtain an IP address, convey its c apabilities and learn about other devices on the network. In turn, a device can l eave a network smoothly and automatically when it is no longer in use. UPnP broadcasts are only allowed on the LAN. Figure 4-35 UPnP: Activate or Deactivate the UPnP function. ...
-
TP-Link TD-8817 - page 52
TD-8817 ADSL2+ Modem Router User Guide 45 4.5.6 CWMP Choose “ Access Management → CWMP ”, you can configure the CW MP function in the screen (shown in Figure 4-37 ). The router offers CWMP feat ure. The function supports TR -069 protocol which collects information, diagnoses the devices and configures the devic es automatically via ACS (Auto- ...
-
TP-Link TD-8817 - page 53
TD-8817 ADSL2+ Modem Router User Guide 46 4.6.1 Administration Choose “ Maintenance → Administration ”, you can set new password for admin in the screen (shown in Figure 4-39 ). Figure 4-39 Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and the password is "admin ...
-
TP-Link TD-8817 - page 54
TD-8817 ADSL2+ Modem Router User Guide 47 Figure 4-40 Note: The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the Router will get the system time automatically from the NTP Serv er . Y ou can also configure the NTP Server address manually , and then the Router will get the time from the specific Server firstly ...
-
TP-Link TD-8817 - page 55
TD-8817 ADSL2+ Modem Router User Guide 48 Figure 4-42 4.6.3 Firmware Choose “ Maintenance → Firmware ”, you can upgrade the firmware of the Router in the screen (shown in Figure 4-43 ). Make sure the firmware or romfile yo u want to use is on the local hard drive of the computer. Click Browse to find the local hard drive and locate the firmwa ...
-
TP-Link TD-8817 - page 56
TD-8817 ADSL2+ Modem Router User Guide 49 2) When you upgrade the router's firmw are, yo u may lose its current configurations, so please back up the router’s current setti ngs before you upgrade its firmware. 3) Do not turn off the router or press the Reset button while the firmware is being upgraded. 4) The router wi ll reboot afte r the u ...
-
TP-Link TD-8817 - page 57
TD-8817 ADSL2+ Modem Router User Guide 50 4.6.4 SysRestart Choose “ Maintenance → SysRe start ”, you can select to restart the device with current settings or restore to factory default settings in the screen (shown in Figure 4-46 ). Figure 4-46 4.6.5 Diagnostics Choose “ Maintenance → Diagnostics ”, you can vi ew the test res ults for ...
-
TP-Link TD-8817 - page 58
TD-8817 ADSL2+ Modem Router User Guide 51 Figure 4-48 Note: Click the tab, and you will be able to get the corresponding information. ...
-
TP-Link TD-8817 - page 59
TD-8817 ADSL2+ Modem Router User Guide 52 Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.992.3, ITU G.992.5 IEEE 802.3, IEEE 802.3u, TCP/IP , PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT,CWMP Safety & Emission FCC, CE Ports 1 10/100M Auto-Negotiation RJ45 port （ Auto MDI/MDIX) 1 RJ11 por ...
-
TP-Link TD-8817 - page 60
TD-8817 ADSL2+ Modem Router User Guide 53 Appendix B: Troubleshooting T1. How do I restore m y Rout er’s configuration to its factor y default settings? With the Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. Note: Once the Router is reset, the current confi guration settings will ...
-
TP-Link TD-8817 - page 61
TD-8817 ADSL2+ Modem Router User Guide 54 Click Network Connections Right-click Local Area Connection Click Properties ...
-
TP-Link TD-8817 - page 62
TD-8817 ADSL2+ Modem Router User Guide 55 Double-click Internet Protocol (TCP/IP) Select Obtain DNS server address automatically Select Obtai n an IP address automatically Click OK ...
-
TP-Link TD-8817 - page 63
TD-8817 ADSL2+ Modem Router User Guide 56 Click OK ...
-
TP-Link TD-8817 - page 64
TD-8817 ADSL2+ Modem Router User Guide 57 For Windows Vista OS Go to Start > Settings > Control Panel , and then you will see the following pa ge. Click View network status and tasks Click View status Click Properties ...
-
TP-Link TD-8817 - page 65
TD-8817 ADSL2+ Modem Router User Guide 58 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK ...
-
TP-Link TD-8817 - page 66
TD-8817 ADSL2+ Modem Router User Guide 59 For Windows 7 OS Go to Start > Settings > Control Panel , and then you will see the following page. Click Change adapter settings Click Properties Right-click Local Area Connection Click Vie w network status and tasks ...
-
TP-Link TD-8817 - page 67
TD-8817 ADSL2+ Modem Router User Guide 60 Double-click Internet Protocol Version 4 (TCP/IPv4) Click OK Select Obtain DNS server address automatically Select Obtai n an IP address automatically ...
-
TP-Link TD-8817 - page 68
TD-8817 ADSL2+ Modem Router User Guide 61 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Click OK Select Never dial a connection Now, try to log on to the Web-based configur ation page agai n after the above settings have been configured. If you still cannot a ccess t ...
-
TP-Link TD-8817 - page 69
TD-8817 ADSL2+ Modem Router User Guide 62 if you can access the Internet. If the pr oblem persists, please go to the next step. 3) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If there are any mistakes, please correct the settings and try again . 4) If you still cannot access the Intern ...
-
TP-Link TD-8817 - page 70
TD-8817 ADSL2+ Modem Router User Guide 63 Appendix C: Technical Support Appendix C: Technical Support Technical Support Technical Support For more troubleshooting help, go to: For more troubleshooting help, go to: www.tp-link .com/en/support/faq www.tp-link.com/en/sup port/faq T o download the latest Firmware, Driver , Utility and User ...
¿Tienes una pregunta acerca de TP-Link TD-8817?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con TP-Link TD-8817, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con TP-Link TD-8817 probablemente compartirá una forma de solucionarlo.