-
Electrolux 50674 - page 1
FAVORIT 50674 User manual Dishwasher ...
-
Electrolux 50674 - page 2
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will exper ience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In add ...
-
Electrolux 50674 - page 3
Contents Operating instructio ns 5 Safety information 5 Correct use 5 General safety 6 Child safety 6 Installation 6 Product description 7 Control p anel 8 Setting mode 9 First use 10 Set the water softener 10 Setting manually 11 Setting electronically 11 Use of dishwasher salt 12 Use of rinse aid 13 Adjusting the dosage of rinse aid 14 Daily use 1 ...
-
Electrolux 50674 - page 4
Cleaning the filters 24 Cleaning the spray arms 26 External cleaning 26 Internal cleanin g 26 Prolonged periods of non-operation 26 Frost precautions 26 Moving the machine 27 What to do if ... 27 Technical data 29 Hints for test ins titute s 30 Installation instructions 32 Installation 32 Fitting under a counter (kitchen worktop or sink) 32 Levelli ...
-
Electrolux 50674 - page 5
Operating instructions Safety information In the interest of your safe ty and to ensure the correct use, before installing and first using the appliance, re ad this use r manual carefull y, including its hints and warnings. To avoid unnecessary mistakes an d accidents, it is important to ensure that all people using the appliance are th oroughly fa ...
-
Electrolux 50674 - page 6
General safety • Dishwasher detergents can cause chemi cal burns to eyes, mouth and throat. Could endanger life! Comply with the sa fety instructions of the dishwasher de - tergent manufa cturer. • The water in your dishwasher is not fo r drinking. Detergent residues may still be present in your machine. • Ensure that the door of the dishwash ...
-
Electrolux 50674 - page 7
WARNING! For electrical and water connection carefully follow the in structions given in specific paragraphs. Product description 1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spra y arm Product description 7 ...
-
Electrolux 50674 - page 8
10 Worktop Control panel 1 On/off button 2 Programme selection buttons 3 Delay start button 4 Indicator lights 5 Digital display 6 Function buttons Indicator lights Programme in progr ess Illuminates when a washing programme is set and rem ains illumin ated f or all th e durat ion of the washing programme. 8 Control panel ...
-
Electrolux 50674 - page 9
Indicator lights End of programme Illuminates when a washing programme has ended. It also has added functions of visual sig - nalling as: - the setting of the water soft ener - activation/deact ivation of the rinse aid dispenser - intervention of an alar m due to the malfunc - tion of the machine MULTITAB Indicates the activation/deactivation of th ...
-
Electrolux 50674 - page 10
To cancel a set programme or a programm e in progress : simultaneously press and hold the two programme bu ttons positioned over the word RESET, until all the programme button lights will illuminate. The programme has been cancelled and the machine is now in setting mode. First use Before using your dishwasher for the first time: • Ensure that th ...
-
Electrolux 50674 - page 11
Water hardness Adjusting the wat er hardness setting Use of salt Clarke °TH mmol/l manually electronically 46 - 52 65 - 75 6,51 - 7,5 2 level 8 yes 36 - 45 51 - 64 5,1 - 6,4 2 level 7 yes 28 - 35 40 - 50 4,0 - 5,0 2 level 6 yes 23 - 27 33 - 39 3,3 - 3,9 2 level 5 yes 18 - 22 26 - 32 2,61 - 3,2 1 level 4 yes 13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes ...
-
Electrolux 50674 - page 12
starts flashing. The current level is indicated by the number of flashes of the End of programme indicator light, (see chart) and a pause of few seconds. Examples: 5 flashes, pause, 5 flashes, pause = level 5 4. To change the level, press button A . Each time the button is pressed the level changes. (For the selection of the new level see the chart ...
-
Electrolux 50674 - page 13
The salt indicator light on the control panel can remain ill uminated for 2-6 hours after the salt has been replenished, assu ming the dishwasher remains switched on. If you are using salts that ta ke longer to dissolve then this can take longer. The function of the mach ine is n ot affected. Use of rinse aid WARNING! Only use branded rinse aid for ...
-
Electrolux 50674 - page 14
2. Add the rinse aid in the container. The maximum level for fill ing is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient for be - tween 16 and 40 dishwashin g cycles, depending upon the dosage setting. 3. Ensure that the lid is closed after every refill. Clean up any rinse aid spilt du ring filling w ...
-
Electrolux 50674 - page 15
• Fill with dishwasher detergent. • Select a wash programme suitable for the cutlery and dishes. • Start the wash programme. Loading cutlery and dishes Sponges, househol d cloths and any obj ect that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you shou ld: – Remove all left over food and debris. – ...
-
Electrolux 50674 - page 16
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suita bility: • Cutlery with wooden, hor n, china or mother- of-pearls handles. • Plastic items that are not heat resistant. • Older cutlery with glued parts that are not temperature resistant. • Bonded cutlery items or dishes. • Pewter or copp ...
-
Electrolux 50674 - page 17
To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be fol ded down. The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. Long and/ or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading o ...
-
Electrolux 50674 - page 18
2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket. • Arrange items of c rockery on and under the folding cup racks so that they are offset from ...
-
Electrolux 50674 - page 19
Use of detergent Only use detergents specifically designed for use in dishwashers. Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging. Using no more than the correct amount of detergent contributes to reducing pol - lution. Fill with detergent 1. Open the lid. 2. Fill the detergent dispens ...
-
Electrolux 50674 - page 20
4. When using detergent tablets, place the tablet in compartment (1) 5. Close the lid and press until it locks in place. Detergent tablets Detergent tablets fr om different manu - factures dissolve at di fferent rates. For this reason, some detergent tablets do not at - tain their full cleaning power duri ng short washing programmes. Therefore, ple ...
-
Electrolux 50674 - page 21
Activation/deactivation of the Multi-Tab function Simultaneously press and hold the two Multi-Tab buttons (D and E), until the "Multi-Tab functi on" indicator light illuminates. This means th at the functi on is active. To deactivate the function press the same buttons again until the "Multi-Tab func - tion" indicator light turn ...
-
Electrolux 50674 - page 22
Washing programmes Programme Degree of soil Type of load Programme description Consumption val - ues 1) Prewash Main wash Intermediate rinse Final rinse Drying Duration (minutes) Energy (kWh) Water (litres) INTENSIV CARE 70° Heavy soil Crockery, cutlery, pots and pans 140-150 1,5-1,7 16-18 30 MIN 2) Light soil Crockery and cutlery 30 0,9 9 NORMAL ...
-
Electrolux 50674 - page 23
3. Press the On/Off button: al l the programme lights illumi nate and in the display 3 horizontal lines are visible (setting mode). 4. Press the button corresponding to the required programme (see "Washing programmes" chart). Close the dishwasher's door, the programme starts automa tically and i n the digital display 1 horiz ontal li ...
-
Electrolux 50674 - page 24
Interrupt a washing programme in progress: • Open the dishwasher door ; the programme will stop. Close the door; the pro - gramme will start from the point at which it was interrupted. • Press the On/Off button, all lights will turn off. Press the On/Off button again; the programme will start from the po int at which it was interrupted. End of ...
-
Electrolux 50674 - page 25
WARNING! Before cleaning the filt ers ensure that the machine is switched off. 1. Open the door, remove the lower basket. 2. The dishwasher filter system compri - ses a coarse filter ( A ), a microfilter ( B ) and a flat filter. Unlock the filter system using the handle on the mi - crofilter, and remove the filter system. 3. Turn the handle about 1 ...
-
Electrolux 50674 - page 26
WARNING! NEVER use the dishwasher wi thout filters. Incorrect re positioning and fitting of the filters will produce poor washing results and may resu lt in damage to the appliance. Cleaning the spray arms NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spra y arms, remove them with a cocktail s tick. External ...
-
Electrolux 50674 - page 27
Moving the machine If you have to move the ma chine (moving house etc....): 1. Unplug it. 2. Turn the water tap off. 3. Remove the water inlet and discharge hoses. 4. Pull the machine out together with the hoses. Avoid over tilting the mach ine during transportation. What to do if ... The dishwasher will not start or stops during oper ation. Certai ...
-
Electrolux 50674 - page 28
Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher’s door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main pl ug. • The fuse has blown out in the househo ld fuse box. Replace t he fuse. • Delay start has bee n set. If dishes are to be washed ...
-
Electrolux 50674 - page 29
The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been se - lected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be over loaded. • The spray arms do not rotate freely due to incorrect arrangement of the load. • The filters in t ...
-
Electrolux 50674 - page 30
Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test prog ramme (see "Washing programmes"). Test in accordance with EN 50242 must be carried ou t when the salt container and rinse aid dispenser have been filled with salt and ri nse aid respectively and using the t ...
-
Electrolux 50674 - page 31
Lower basket with cutlery basket Cutlery basket 1) If there are cup ra cks in place on the leftha nd side, r emove th em. Hints for test i nstitutes 31 ...
-
Electrolux 50674 - page 32
Installation instructions Installation WARNING! Any electrical and/or plumbin g work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packagi ng before positioning the machine. If possible, position the machine next to a water tap and a drain. Fitting under a counter ...
-
Electrolux 50674 - page 33
When inserting the mac hine, ensure that the water inlet and drai n hoses are not kinked or squa shed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged. Be sure that once the appliance has been in stalled, it is easily accessible for the service engineer in the event that a repair is require ...
-
Electrolux 50674 - page 34
to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inle t hose. DO NOT use connection hoses which have previo usly been used for an old appliance. This appliance has been fitted with safety featur es which will pr event th e water used in the appliance from retu rning bac ...
-
Electrolux 50674 - page 35
When connecting the dr ain hose to an under sink trap spigot, the entire plastic mem- brane (A) must be removed . Failure to re - move all the membrane will result in food particles buildi ng up over time eventually blocking the dishwa sher drain hose spigot. Our appliances are supp lied with a security device to protect agains t the return of dirt ...
-
Electrolux 50674 - page 36
Environment concerns Packaging material The packaging materials are environmenta lly friendly a nd can be recycl ed. The plastic components are identi fied by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate contai ner at the community waste disposal facilities. WARNING! When a unit is no long ...
-
Electrolux 50674 - page 37
37 ...
-
Electrolux 50674 - page 38
38 ...
-
Electrolux 50674 - page 39
39 ...
-
Electrolux 50674 - page 40
www.electrolux.com 117980510-1909200 7 Subject to change without notice ...
¿Tienes una pregunta acerca de Electrolux 50674?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux 50674, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux 50674 probablemente compartirá una forma de solucionarlo.