Français dropdown-ico

Manuel d’utilisation Axis Communications P5414-E

68 pages 2.08 mb
Télécharger

Aller à la page of 68

Summary
  • Axis Communications P5414-E - page 1

    AXIS P54 14–E PTZ Dome Network Camera User Manual ...

  • Axis Communications P5414-E - page 2

    About this Document This manual is intended for administrators and users of the AXIS P54 14–E PTZ Dome Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linu ...

  • Axis Communications P5414-E - page 3

    Safety This product complies with IEC/EN/UL 60950-1 and IEC/EN/UL 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage (SELV) and Limited P ow ...

  • Axis Communications P5414-E - page 4

    AXIS P5414–E PTZ Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications P5414-E - page 5

    AXIS P5414–E PTZ Dome Network Camera T able of Contents Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Symptoms, P ossible Causes and Remedial Actions . . . . . . . . . . . ...

  • Axis Communications P5414-E - page 6

    AXIS P5414–E PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 8 1 Control button 2 Status LED indicator 3 SD memory card slot 4 Audio connector 5 I/O connector 6 P ower connector 7 Network connector (PoE+) 8 P art number (P/N) & Serial number (S/N) Connectors and Buttons For technical specications, see page 63 . Ne ...

  • Axis Communications P5414-E - page 7

    AXIS P5414–E PTZ Dome Network Camera Hardware Overview I/O Connector Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording and alarm notications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to: • Digi ...

  • Axis Communications P5414-E - page 8

    AXIS P5414–E PTZ Dome Network Camera Hardware Overview LED Indicators LED Color Indication Unlit Connection and normal operation Amber Steady during startup. Flashes during rmware upgrade. Amber/red Flashes amber/red if network connection is unavailable or lost. Red Flashes red for rmware upgrade failure. Status Green Shows steady green for ...

  • Axis Communications P5414-E - page 9

    AXIS P5414–E PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating sys ...

  • Axis Communications P5414-E - page 10

    AXIS P5414–E PTZ Dome Network Camera Access the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). T o access the product from the Internet you must congure your network router to allow incoming data trafc to the product. To do this, enable the NAT-traversal feature, which will attem ...

  • Axis Communications P5414-E - page 11

    AXIS P5414–E PTZ Dome Network Camera Access the Product The Live View P age The controls and layout of the Live View page may have been customized to meet specic installation requirements and user preferences. Consequently , some of the examples and functions featured here may differ from those displayed in your own Live View page. The followi ...

  • Axis Communications P5414-E - page 12

    AXIS P5414–E PTZ Dome Network Camera Access the Product To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Cong . 2. Under Action Buttons , select Show manual trigger button . AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only . See AXIS Media Cont ...

  • Axis Communications P5414-E - page 13

    AXIS P5414–E PTZ Dome Network Camera Access the Product Select Focus window to dene an area of the camera's image that focus should be applied on. If the focus window is set from the Live View page, any change in the camera position will return the autofocus to the entire window . To set a permanent focus window , see Preset P ositions on ...

  • Axis Communications P5414-E - page 14

    AXIS P5414–E PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of availab ...

  • Axis Communications P5414-E - page 15

    AXIS P5414–E PTZ Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Wind ...

  • Axis Communications P5414-E - page 16

    AXIS P5414–E PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The L ...

  • Axis Communications P5414-E - page 17

    AXIS P5414–E PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access t ...

  • Axis Communications P5414-E - page 18

    AXIS P5414–E PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 18 . • Stream proles. See page 20 . • Camera settings. See page 20 . • Overlay image. See page 2 1 . • Privacy mask. S ...

  • Axis Communications P5414-E - page 19

    AXIS P5414–E PTZ Dome Network Camera Video and Audio • Compression . The compression level affects the image quality , bandwidth and le size of saved images; the lower the compression, the higher the image quality with higher bandwidth requirements and larger le sizes. • Rotate image . If required, the image can be rotated. • Maximum ...

  • Axis Communications P5414-E - page 20

    AXIS P5414–E PTZ Dome Network Camera Video and Audio Stream Proles A stream prole is a set of predened stream settings including resolution, compression, frame rate and overlay settings. Stream proles can be used: • When setting up recording using action rules. See Events on page 37 . • When setting up continuous recording. See Co ...

  • Axis Communications P5414-E - page 21

    AXIS P5414–E PTZ Dome Network Camera Video and Audio Enable Backlight compensation - Enable this option if a bright spot of light, for example a light bulb , causes other areas in the image to appear too dark. Exposure zones - This setting determines which part of the image is used to calculate the exposure. For most situations, the Auto setting ...

  • Axis Communications P5414-E - page 22

    AXIS P5414–E PTZ Dome Network Camera Video and Audio It is also possible to display text when an action rule is triggered, see Use Overlay T ext in an Action Rule . To enable overlays: 1. Go to Video & Audio > Video Stream and select the Image tab . 2. T o include an overlay image, select Include overlay image at the coordinates . The over ...

  • Axis Communications P5414-E - page 23

    AXIS P5414–E PTZ Dome Network Camera Video and Audio 2. Under Overlay Settings , select Include overlay image at the coordinates . 3. T o control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner . If a part of the image is positioned outside the video image, the overlay image will be moved so ...

  • Axis Communications P5414-E - page 24

    AXIS P5414–E PTZ Dome Network Camera Video and Audio Audio Settings The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio . Audio Modes The Axis product supports the following audio modes: Full duplex - Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the ...

  • Axis Communications P5414-E - page 25

    AXIS P5414–E PTZ Dome Network Camera Video and Audio Set the required Bit rate depending on the selected encoding. A higher bit rate will give better audio quality . A lower bit rate may have latency or delay , but will require less bandwidth. For more information about these settings, please see the online help . Audio Output Congure the audi ...

  • Axis Communications P5414-E - page 26

    AXIS P5414–E PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 26 . • Viewer Settings ...

  • Axis Communications P5414-E - page 27

    AXIS P5414–E PTZ Dome Network Camera Configure the Live View Page Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher . • JRE (J2SE) 5.0 or ...

  • Axis Communications P5414-E - page 28

    AXIS P5414–E PTZ Dome Network Camera Configure the Live View Page - Pulse activates the output for a dened period of time. The pulse time can be set from 1/1 00 second to 60 seconds. - Active/Inactive displays two buttons, one or each action. To congure the active and inactive states, go to System Options > P orts & Devices > I/O ...

  • Axis Communications P5414-E - page 29

    AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position. A preset position consists of the following values: • P an and tilt positions • Zoom position • Focus position (manual or automatic) Focus Wind ...

  • Axis Communications P5414-E - page 30

    AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) 2. Enter a descriptive name. 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the Move Speed . 6. Specify the View Time in seconds or minutes. 7. Specify the View Order or select the Random view order option. 8. Click Save . To mo ...

  • Axis Communications P5414-E - page 31

    AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view ...

  • Axis Communications P5414-E - page 32

    AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) A user who belongs to a group (see Users on page 45 ) with a higher PTZ priority can go before other users in the queue and take control of the product. The order of priority is as follows: 1. Administrator — An administrator takes over PTZ control regardless of who is rst in queue. Th ...

  • Axis Communications P5414-E - page 33

    AXIS P5414–E PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view . Motion detection is congured by dening up to 1 0 Include and Exclude windows: • Include windows — dene areas where motion should be detected • Exclude windows ...

  • Axis Communications P5414-E - page 34

    AXIS P5414–E PTZ Dome Network Camera Detectors Motion Detection P arameters The parameters controlling motion detection are described in the table below: P arameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (1 00%) Only v ...

  • Axis Communications P5414-E - page 35

    AXIS P5414–E PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applicati ...

  • Axis Communications P5414-E - page 36

    AXIS P5414–E PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 36 ...

  • Axis Communications P5414-E - page 37

    AXIS P5414–E PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an ac ...

  • Axis Communications P5414-E - page 38

    AXIS P5414–E PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 35 . • Detectors - Audio Detection – Trigger the rule when audio is detected. See Audio Detection ...

  • Axis Communications P5414-E - page 39

    AXIS P5414–E PTZ Dome Network Camera Events • Time - Recurrence – Trigger the rule periodically . See Set Up Recurrences on page 4 1 . This can for example be used to upload an image every 5 minutes. - Use Schedule – T rigger the rule according to the selected schedule. See Create Schedules on page 41 . Actions Available actions include: ? ...

  • Axis Communications P5414-E - page 40

    AXIS P5414–E PTZ Dome Network Camera Events Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses. For more information about email recipients, see Set Up Email Recipients on page 40 FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video ...

  • Axis Communications P5414-E - page 41

    AXIS P5414–E PTZ Dome Network Camera Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofce hours. Use one of the predened schedules or create a new schedule as described below . To create a new schedule: 1. Go to Events > Schedules ...

  • Axis Communications P5414-E - page 42

    AXIS P5414–E PTZ Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 42 . • To set up action rules, see page 37 . • To access recordings, see Recording List on page 42 . • To congure camera controlled stora ...

  • Axis Communications P5414-E - page 43

    AXIS P5414–E PTZ Dome Network Camera Recordings 5. Click Save to save and start the recording. 43 ...

  • Axis Communications P5414-E - page 44

    AXIS P5414–E PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language b ...

  • Axis Communications P5414-E - page 45

    AXIS P5414–E PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that an ...

  • Axis Communications P5414-E - page 46

    AXIS P5414–E PTZ Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the ...

  • Axis Communications P5414-E - page 47

    AXIS P5414–E PTZ Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above. 2. ...

  • Axis Communications P5414-E - page 48

    AXIS P5414–E PTZ Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP ad ...

  • Axis Communications P5414-E - page 49

    AXIS P5414–E PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting ...

  • Axis Communications P5414-E - page 50

    AXIS P5414–E PTZ Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver. ...

  • Axis Communications P5414-E - page 51

    AXIS P5414–E PTZ Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router , Network router , Internet Gateway , Broadband router , Broadband sharing device, or a software ...

  • Axis Communications P5414-E - page 52

    AXIS P5414–E PTZ Dome Network Camera System Options SMTP (email) To send email messages from the Axis product via SMTP (Simple Mail T ransfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email) . Enter the host names or IP addresses and port numbers for the primary and secondary mail ser ...

  • Axis Communications P5414-E - page 53

    AXIS P5414–E PTZ Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour . Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour . Storage SD Card NO NO NO TICE TICE ...

  • Axis Communications P5414-E - page 54

    AXIS P5414–E PTZ Dome Network Camera System Options To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools . To avoid lling the share, it is recommended to remove recordings continuously . Under Recording Settings , select Remove recordings older than and select the number of ...

  • Axis Communications P5414-E - page 55

    AXIS P5414–E PTZ Dome Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 58 . System Overview To get an overview of the Axis product’s status an ...

  • Axis Communications P5414-E - page 56

    AXIS P5414–E PTZ Dome Network Camera System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. T o upload a le, go to System Options > Advanced > File Upload . Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where ...

  • Axis Communications P5414-E - page 57

    AXIS P5414–E PTZ Dome Network Camera Repainting the Camera Repainting the Camera The covers can be repainted to match the installation environment. The material used in the covers is ASA Geloy XTWM206. Use paint suitable for this material. 1. Remove the two top cover screws. 2. Use a thin palette knife to release the locking tabs while pulling th ...

  • Axis Communications P5414-E - page 58

    AXIS P5414–E PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular probl ...

  • Axis Communications P5414-E - page 59

    AXIS P5414–E PTZ Dome Network Camera Troubleshooting Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Status indicator indicates a failed upgrade. To recover the product, follow the steps below . The serial number is found on the product’ ...

  • Axis Communications P5414-E - page 60

    AXIS P5414–E PTZ Dome Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network. Identify the product using its model or serial number , or by the ...

  • Axis Communications P5414-E - page 61

    AXIS P5414–E PTZ Dome Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 67 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available. Check in the AMC Control P anel ...

  • Axis Communications P5414-E - page 62

    AXIS P5414–E PTZ Dome Network Camera Troubleshooting Video cannot be recorded Check that the SD card is not write protected (that is, read only). SD card cannot be mounted Reformat the SD card and then click Mount. NO NO NO TICE TICE TICE Formatting the card will remove all content, including all recordings, from the SD card. 62 ...

  • Axis Communications P5414-E - page 63

    AXIS P5414–E PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P54 14–E 50 Hz AXIS P54 14–E 60 Hz Image sensor 1/2.8” progressive scan RGB CMOS Lens f=4.7 mm – 84.6 mm F1.6 — 2.8 Autofocus Automatic day and night functionality Horizontal angle of view: 59° — ...

  • Axis Communications P5414-E - page 64

    AXIS P5414–E PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, HTTPS encryption*, IEEE 80 2.1X network access control*, digest authentication, user access log *This product includes software developed by the Open SSL Project for use in the Open SSL Toolkit ...

  • Axis Communications P5414-E - page 65

    AXIS P5414–E PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Operating conditions Temperature: –20 °C to 50 °C (–4 °F to 122 °F) Humidity 1 0–1 00% RH (condensing) Approvals EN 50 12 1–4, IEC 62236–4, EN 550 22 Class B, EN 6 1 000-6-1, EN 6 1 000-6-2, EN 55024, FCC P art 15 Subpart B Class B, I ...

  • Axis Communications P5414-E - page 66

    AXIS P5414–E PTZ Dome Network Camera T echnical Specifications 12 V m ax 50 m A 1 2 3 4 3. I/O congured as input 4. I/O congured as output P ower Connector 2-pin terminal block for power input. Use a Safety Extra Low V oltage (SEL V) compliant limited power source (LPS) with either a rated output power limited to ≤ 1 00 W or a rated outp ...

  • Axis Communications P5414-E - page 67

    AXIS P5414–E PTZ Dome Network Camera T echnical Specifications 1 Tip 2 Ring 3 Sleeve Audio Input Microphone/Line in Ground SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 1 0. P erformance Considerations When setting up your system, it is important to consider ...

  • Axis Communications P5414-E - page 68

    User Manual V er . M3.2 AXIS P54 14–E PTZ Dome Network Camera Date: November 2014 © Axis Communications AB, 2013–20 14 P art No. 60889 ...

Fabricant Axis Communications Catégorie Security Camera

Les documents que nous recevons du fabricant de l'appareilAxis Communications P5414-E peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Axis Communications
- manuels d’utilisations P5414-E
- fiches produit Axis Communications
- dépliants
- ou étiquettes-énergie Axis Communications P5414-E
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Axis Communications P5414-E.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Axis Communications P5414-E, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Axis Communications P5414-E. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Axis Communications P5414-E.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Axis Communications P5414-E, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Axis Communications P5414-E par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Axis Communications P5414-E.

Le manuel d’utilisation complet Axis Communications, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Axis Communications P5414-E - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Axis Communications P5414-E, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAxis Communications P5414-E qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Axis Communications P5414-E - qui devraient nous aider dans les premières étapes lors de l'utilisation Axis Communications P5414-E
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Axis Communications P5414-E
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Axis Communications P5414-E dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Axis Communications P5414-E?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Axis Communications P5414-E, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Axis Communications P5414-E il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)