Les documents que nous recevons du fabricant de l'appareilPanasonic PT-VX501U peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Panasonic
- manuels d’utilisations PT-VX501U
- fiches produit Panasonic
- dépliants
- ou étiquettes-énergie Panasonic PT-VX501U
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Panasonic PT-VX501U.
- UserManuals.org
- Panasonic
- Panasonic Projecteur
- Panasonic PT-VX501U
Manuel d’utilisation Panasonic PT-VX501U
Aller à la page of 100
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
Summary
-
Panasonic PT-VX501U - page 1
Operating Instructions Functional Manual LCD Projector Commercial Use Thank you for purchasing this Panasonic Product. Before operating this product, please read the instructions carefully , and save this manual J for future use. Before using your projector , be sure to read “Read this rst!” ( J Æ pages 2 to 8). Model No. PT -VW430U PT -VX5 ...
-
Panasonic PT-VX501U - page 2
2 - ENGLISH Important Information Read this rst! W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V , 50 Hz/60 Hz AC, house current only . CAUTION: The AC power cord which is supplied with the projector as an accessory can onl ...
-
Panasonic PT-VX501U - page 3
Read this rst! ENGLISH - 3 Important Information FCC NOTICE (USA) Declaration of Conformity Model Number: PT -VW430U/PT -VX500U/PT -VX501U T rade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: One Panasonic W ay , Secaucus, NJ 07094 T elephone number: (877)803-8492 E-mail: projectorsupport@us.panasonic.com Thi ...
-
Panasonic PT-VX501U - page 4
Read this rst! 4 - ENGLISH Important Information W ARNING: PO WER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately . Continued use of the projector in these conditions will result in re or ...
-
Panasonic PT-VX501U - page 5
Read this rst! ENGLISH - 5 Important Information W ARNING: Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician. If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks. Do not use anything other than an authorized ceiling mount bracket. ...
-
Panasonic PT-VX501U - page 6
Read this rst! 6 - ENGLISH Important Information W ARNING: ACCESSORI ES Do not use or handle the batteries improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re. Do not use unspecied batteries. z Do not disassemble dry cell batteries. z Do not heat the batter ...
-
Panasonic PT-VX501U - page 7
Read this rst! ENGLISH - 7 Important Information CAUTION: PO WER When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result. When not using the projector for an extended period of tim ...
-
Panasonic PT-VX501U - page 8
Read this rst! 8 - ENGLISH Important Information Brazil Only Brasil Apenas Manuseio de b at er ia s us ada s BR A SIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de d ...
-
Panasonic PT-VX501U - page 9
ENGLISH - 9 This function enables Input search, Auto Keystone correction and Auto PC adjustment by pressing the <AUT O SETUP> button. With the Direct Power Of f function, you can disconnect the power cord from the wall outlet or turn of f the breaker even during projection. The inclusion of an HDMI IN terminal provides support for high qualit ...
-
Panasonic PT-VX501U - page 10
10 - ENGLISH Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Be sure to read “Read this rst!”. ( pages 2 to 8) Important Information Read this rst! ........................................... 2 Contents ................................................... 10 Precautions for Use...... ...
-
Panasonic PT-VX501U - page 11
ENGLISH - 11 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Image adjust............................................. 45 Contrast ........................................................................ 45 Brightness .................................................................... 45 Col ...
-
Panasonic PT-VX501U - page 12
12 - ENGLISH Important Information Precautions for Use Cautions when transporting When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts. z Doing so may damage the internal parts and result in malfunctions. Do not transport the projector with the adjustable feet extended. Doing so may damage the a ...
-
Panasonic PT-VX501U - page 13
Precautions for Use ENGLISH - 13 Important Information Cautio ns when set ting the pro jec tor s J z Do not stack the projectors. Do not block the ventilation ports (intake and exhaust) of the z projector . Avoid heating and cooling air from the air conditioning system z directly blow to the ventilation ports (intake and exhaust) of the projector . ...
-
Panasonic PT-VX501U - page 14
Precautions for Use 14 - ENGLISH Important Information Cautions on use I n ord er to get th e pi ctu re qu al ity J Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light z from indoor lamps from shining onto the screen. Depending on where the projector is used, heated air from an exhaust port ...
-
Panasonic PT-VX501U - page 15
Precautions for Use ENGLISH - 15 Important Information Accessories Make sure the following accessories are provided with your projector . Numbers in the brackets ( ) show the number of accessories. Remote control unit (x1) (6451053893) Power cord (x1) (6103581217) CD-ROM (x1) (6103589367) Batteries (AAA/R03 t ype) (x2) (for remote control unit) RGB ...
-
Panasonic PT-VX501U - page 16
Precautions for Use 16 - ENGLISH Important Information Contents o f the supp li ed J CD-R O M The contents of the supplied CD-ROM are as follow . Manual/list (PDF) Software Optional accessories Options Model No. Ceiling Mount Bracket ET -PKV100H (for high ceilings), ET -PKV100S (for low ceilings) Projector Mount Base ET -PKV200B Replacement Lamp Un ...
-
Panasonic PT-VX501U - page 17
ENGLISH - 17 Preparation About Y our Projector Remote control (1) <AUTO SETUP> Button Execute the setting of Auto setup in the setting menu. ( Æ page 52) (2) Input Selection Buttons: <COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>, <COMPONENT>. These buttons are used to select the input signal. ( Æ ...
-
Panasonic PT-VX501U - page 18
About Y our Projector 18 - ENGLISH Preparation (1) Remote control signal receiver (2) Focus Lever ( Æ page 31) Adjust the focus. (3) Projection Lens (4) Zoom Lever ( Æ page 31) Adjust the zoom. (5) V ertical lens shift ring ( Æ page 24) Adjust the vertical position of the projected image. (6) Control Panel and Indicators ( Æ page 19) (7) Lamp c ...
-
Panasonic PT-VX501U - page 19
About Y our Projector ENGLISH - 19 Preparation Control panel (1) COMPUTER 1 IN/ COMPONENT IN Connect to COMPUTER 1 IN/ COMPONENT IN input signals. (2) COMPUTER 2 IN/ MONITOR OUT Connect to COMPUTER 2 IN/ MONITOR OUT input signals or outputs the analog RGB signals input the projector . (3) HDMI IN Connect to HDMI input signals. (4) LAN Connect to a ...
-
Panasonic PT-VX501U - page 20
20 - ENGLISH Preparation Using Remote control Installing and Removing batteries Open the cover 1 ) Install batteries and close the cover 2 ) (Insert the – side rst.) Remove the batteries in the reverse order of z installation. Setting Remote control ID numbers When you use the system with multiple projectors, you can operate all the projectors ...
-
Panasonic PT-VX501U - page 21
ENGLISH - 21 Getting Started Setting up Projection method Y ou can use the projector with any of the following 4 projection methods. T o set the desired method in the projector . Setting on a desk/oor and J projecting forward Mounting on the ceiling and J projecting forward Menu setting* 1 Menu setting* 1 Ceiling Off Rear Off Ceiling On Rear Off ...
-
Panasonic PT-VX501U - page 22
Setting up 22 - ENGLISH Getting Started Screen size and throw distance Place the projector referring to the diagram on the right and the gures of throwing distance. Y ou can adjust the display size. L (L W/L T) Screen L (L W/L T) SW Screen SH SW SD Projected image SH L (L W/L T) * 1 Projection distance (m) SH Height of the projection area (m) SW ...
-
Panasonic PT-VX501U - page 23
Setting up ENGLISH - 23 Getting Started If the screen dimensions are written as “SD", For 4:3 aspect ratio For 16:9 aspect ratio For 16:10 aspect ratio Screen height (SH) = SD(m) × 0.6 = SD(m) × 0.490 = SD(m) × 0.530 Screen width (SW) = SD(m) × 0.8 = SD(m) × 0.872 = SD(m) × 0.848 Minimum distance (L W) = 0.1 1461 × SD(m) - 0.02936 = 0 ...
-
Panasonic PT-VX501U - page 24
Setting up 24 - ENGLISH Getting Started Adjusting the position using the vertical lens shift function If the projector is not positioned right in front of the center of the screen, you can adjust the vertical position of projected image by moving the vertical lens ring within the shift range of the lens. Lens shift adjustment for PT -VX500U 1 ) and ...
-
Panasonic PT-VX501U - page 25
ENGLISH - 25 Getting Started Connections Before connecting to the projector Read carefully the instruction manual for the device to be connected. z T urn off the power switch of the devices before connecting cables. z If any connection cable is not supplied with the device, or if no optional cable is available for connection of the z device, prepar ...
-
Panasonic PT-VX501U - page 26
26 - ENGLISH Basic Operation Powering ON/OFF Connecting the power cord Be sure to insert the attached power cord securely to its base to prevent it from coming off. Power cord holder J A power cord holder is designed to prevent the AC power cord from coming off the projector . Please insert the power cord into the power cord holder correctly as Pic ...
-
Panasonic PT-VX501U - page 27
Powering ON/OFF ENGLISH - 27 Basic Operation ON(G)/ST ANDBY(R) indicator The power indicator informs you the status of the power . Conrm the status of the <ON(G)/ST ANDBY(R)> indicator before operating the projector . ON(G)/ST ANDBY(R) indicator Indicator status Status No illumination or ashing The power cord is unplugged. RED Lit The p ...
-
Panasonic PT-VX501U - page 28
Powering ON/OFF 28 - ENGLISH Basic Operation Complete peripheral connections (with a 1 ) computer , VCR, etc.) before turning on the projector . Connect the projector ’s AC power cord into an 2 ) AC outlet. The <ON(G)/ST ANDBY(R)> indicator lights red. Open the lens cap. Press the < 3 ) > button to on the control panel or on the remot ...
-
Panasonic PT-VX501U - page 29
Powering ON/OFF ENGLISH - 29 Basic Operation Enter a PIN code PIN Code Input Dialog Box Press ▲▼ to enter a number . Press ► to x the number and move the red frame pointer to the next box. The number changes to . If you xed an incorrect number , use the ◄ button to move the pointer to the number you want to correct, and then enter ...
-
Panasonic PT-VX501U - page 30
Powering ON/OFF 30 - ENGLISH Basic Operation Press the < 1 ) > button on the control panel or on the remote control, and Power off? appears on the screen. Press the < 2 ) > button again to turn off the projector . The <ON(G)/ST ANDBY(R)> indicator starts to blink orange, and the cooling fans keep running. At this time, you can unp ...
-
Panasonic PT-VX501U - page 31
ENGLISH - 31 Basic Operation Projecting Check the connections of the peripheral devices and connection of the power cord ( Æ page 26) and switch on the power ( Æ page 28) to start the projector . Select the image and adjust the state of the image. Selecting the image Select an input signal. The image selected with the <COMPUTER 1>, <COMP ...
-
Panasonic PT-VX501U - page 32
32 - ENGLISH Basic Operation Basic operations by using the remote control Using the AUTO SETUP function This function allows you to automatically adjust Input search, Auto Keystone correction and Auto PC adjustment during signal input from a computer . button Press the <AUTO SETUP> button on the remote control. Note For details, see “Settin ...
-
Panasonic PT-VX501U - page 33
Basic operations by using the remote control ENGLISH - 33 Basic Operation Using the KEYST ONE button This function allows you to correct keystone distortion. button If a projected picture still has keystone distortion after pressing the <AUTO SETUP> button, correct the image manually as follows: Press the <KEYSTONE> button on the remote ...
-
Panasonic PT-VX501U - page 34
Basic operations by using the remote control 34 - ENGLISH Basic Operation Using the A V MUTE function button Press the < A V MUTE> button on the remote control to black out the image. T o restore to normal, press the < A V MUTE> button again or press any button. When the Logo is not set, the screen changes each time z you press the < ...
-
Panasonic PT-VX501U - page 35
Basic operations by using the remote control ENGLISH - 35 Basic Operation Using the IMAGE button This function allows you to select a desired image mode of the screen. button Press <IMAGE> button on th e remote control to selec t the d esired im age mode amon g [D ynam ic], [Sta ndard ], [Real], [Cinema], [Blackboard (Green)], [Colorboard], [ ...
-
Panasonic PT-VX501U - page 36
36 - ENGLISH Settings Menu Navigation Navigating through the menu Operating procedure J Press the <MENU> button. 1 ) The Main Menu screen appears. Press ▲▼ to select the Main Menu 2 ) item. Select the desired item from the 9 items: [Input], [PC adjust], [Image select], [Image adjust], [Screen], [Sound], [Setting], [Information] and [Netwo ...
-
Panasonic PT-VX501U - page 37
Menu Navigation ENGLISH - 37 Settings Main menu The main menu consists of the following 9 menu items. When a main menu item is selected, the screen changes to a submenu selection screen. Input PC adjust Image select Image adjust Screen Sound Setting Information Network Sub menu The sub-menu screen of the selected main menu appears, and you can set ...
-
Panasonic PT-VX501U - page 38
Menu Navigation 38 - ENGLISH Settings Screen [ ] Sub-menu item Factory default Page Normal - 48 Full* 1 - 48 Wide (16:9)* 1 - 48 Zoom * 1 - 48 T rue* 1 - 48 Natural wide* 2 - 48 Custom - 48 Custom adj.* 1 - 49 Digital zoom +* 1 - 49 Digital zoom -* 1 - 49 Keystone Store 49 Ceiling Off 50 Rear Off 50 Screen aspect* 2 Default(16:10) 50 Reset - 50 Whe ...
-
Panasonic PT-VX501U - page 39
ENGLISH - 39 Settings Input menu Select [Input] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Computer 1: RGB/Component /RGB (Scart) Press ▲▼ to select [Computer 1]. 1 ) Press ► to access the submenu. 2 ) Press ▲▼ to select RGB, Component 3 ) or ...
-
Panasonic PT-VX501U - page 40
Input menu 40 - ENGLISH Settings P AL/SECAM/NTSC/NTSC4.43/P AL-M/P AL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among [P AL], [SECAM], [NTSC], [NTSC 4.43], [P AL-M] and [P AL-N]. Component Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize it ...
-
Panasonic PT-VX501U - page 41
ENGLISH - 41 Settings AUT O PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Auto PC adj. Auto PC adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to you ...
-
Panasonic PT-VX501U - page 42
42 - ENGLISH Settings Manual PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC adjustment enables you to precise ...
-
Panasonic PT-VX501U - page 43
Manual PC adjust ENGLISH - 43 Settings Current mode Press ▲▼ to select [Current mode]. 1 ) Press ► or the <ENTER> button to 2 ) enter the next submenu to show H-sync freq. and V -sync freq. of the connected computer . Clamp Press ▲▼ to select [Clamp]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box. Press ...
-
Panasonic PT-VX501U - page 44
44 - ENGLISH Settings Image select Select [Image select] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Dynamic For viewing pictures in a bright room. Press ▲▼ to select [Dynamic] and then press the <ENTER> button. Standard Normal picture mode pre ...
-
Panasonic PT-VX501U - page 45
ENGLISH - 45 Settings Select [Image adjust] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Note Make sure you selected [Store] after adjusting settings. z Some settings can not be stored if not registered with [Store] function. Contrast Press ▲▼ to sele ...
-
Panasonic PT-VX501U - page 46
Image adjust 46 - ENGLISH Settings Color temp. Press ▲▼ to select [Color temp.]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box. Press ◄► to select the desired Color 3 ) temp. level. Y ou can select the desired [Color temp.] from z [XLow], [Low], [Mid] or [High]. Note [Color temp.] level displays [Blackbord] or ...
-
Panasonic PT-VX501U - page 47
Image adjust ENGLISH - 47 Settings Sharpness Press ▲▼ to select [Sharpness]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box. Press ◄► to adjust the setting value. 3 ) Operation Adjustment Adjustment range Press ►. increase the sharpness of the image Maximum value 15 Press ◄. decrease the sharpness of the ima ...
-
Panasonic PT-VX501U - page 48
48 - ENGLISH Settings Screen Select [Screen] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Normal Provide the image to t the screen size while maintaining the aspect ratio of the input signal. Press ▲▼ to select [Normal] and then press the <ENTER ...
-
Panasonic PT-VX501U - page 49
ENGLISH - 49 Settings Custom adj. Adjust the screen scale and position manually with this function. Press ▲▼ to select [Custom adj.]. 1 ) Press ► or the <ENTER> button to 2 ) enter the next submenu. Press ▲▼ to choose the item you 3 ) want to adjust. Y ou can choose one from the items as below: z Scale H/V Adjust the Horizontal/V er ...
-
Panasonic PT-VX501U - page 50
50 - ENGLISH Settings Ceiling This function is used to project the image from a ceiling-mounted projector . Press ▲▼ to select [Ceiling] and then 1 ) press the <ENTER> button. Press ▲▼ to change the image. 2 ) When this function is set to [On], the picture will z be top/bottom and left/right reversed. Rear This function is used to pro ...
-
Panasonic PT-VX501U - page 51
ENGLISH - 51 Settings Sound Select [Sound] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel V olume Press ▲▼ to select [V olume] and then 1 ) press the <ENTER> button. Press ◄► to adjust the volume. 2 ) Press <ENTER> button to set the volu ...
-
Panasonic PT-VX501U - page 52
52 - ENGLISH Settings Setting Select [Setting] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Language Press ▲▼ to select [Language]. 1 ) Press ► or the <ENTER> button. 2 ) Press ▲▼ to select the desired 3 ) language. The language used in th ...
-
Panasonic PT-VX501U - page 53
Setting ENGLISH - 53 Settings Auto keystone J Auto Always works and corrects keystone distortion according to the projector's tilt. Manual Works only when pressing the <AUT O SETUP> button on the remote control or the control panel. Off Disables Auto Keystone. Note [Input search], [Auto PC adj.] and [Auto Keystone] cannot z be set [Off] ...
-
Panasonic PT-VX501U - page 54
Setting 54 - ENGLISH Settings Logo PIN code change J Logo PIN code can be changed to your desired four- digit number . Press ▲▼ to select [Logo PIN code 1 ) change] and press the <ENTER> button. Current logo PIN code dialog box appears. z Press ▲▼ to enter the current code, 2 ) press the ► button to x the number and move the red ...
-
Panasonic PT-VX501U - page 55
Setting ENGLISH - 55 Settings Direct on Press ▲▼ to select [Direct on] and 1 ) then press the <ENTER> button. Press ▲▼ to switch between [On] and 2 ) [Off]. When this function is set to [On], the projector z will be automatically turned on just by connecting the AC power cord to a wall outlet. Be sure to turn off the projector properl ...
-
Panasonic PT-VX501U - page 56
Setting 56 - ENGLISH Settings Closed caption [ Only for NTSC, 480i input ] Press ▲▼ to select [Closed caption]. 1 ) Press ► or the <ENTER> button to 2 ) enter the submenu. Closed caption J Press ▲▼ to select [Closed caption] 1 ) and then press the <ENTER> button. Press ▲▼ to select [Off], [CC1], [CC2], 2 ) [CC3] or [CC4]. ...
-
Panasonic PT-VX501U - page 57
ENGLISH - 57 Settings Setting PIN code lock J This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security . Press ▲▼ to select the desired items 1 ) as below . Off Unlocked. On 1 Enter the PIN code every time turning on the projector . On 2 Enter the PIN code to operat ...
-
Panasonic PT-VX501U - page 58
Setting 58 - ENGLISH Settings Filter counter This function is used to set a frequency for the lter replacement. Press ▲▼ to select [Filter counter]. 1 ) Press ►or the <ENTER> button to 2 ) access the submenu items. Filter counter J Show the total accumulated time of the lter use timer setting. T imer J T o set a timer . When the p ...
-
Panasonic PT-VX501U - page 59
Setting ENGLISH - 59 Settings W arning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Press ▲▼ to select [W arning log]. 1 ) Press ► or the <ENTER> button to 2 ) display the latest warning message. Up to 10 warning logs are displayed with the z latest warning message ...
-
Panasonic PT-VX501U - page 60
60 - ENGLISH Settings Select [Information] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector . Y ou can ...
-
Panasonic PT-VX501U - page 61
ENGLISH - 61 Settings Network Select [Setting] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote Control Control Panel Projector name Y ou can change the projector name to be displayed on the network. Press ▲ ▼ to select [P rojector name ], 1 ) and press <ENTER> button. S ...
-
Panasonic PT-VX501U - page 62
Network 62 - ENGLISH Settings Network control Set when you want to control t he projec tor fr om a com puter conn ected to the net wor k. Press ▲ ▼ to select [Network cont rol]. 1 ) Press <ENTER > but ton to select [On ] 2 ) or [Of f ] with t he ▲ ▼ but tons. Network status This func tion s hows the L A N set ting environme nt of the ...
-
Panasonic PT-VX501U - page 63
Network ENGLISH - 63 Settings Network connections The projector has a network fuction, and the following operations are available from the computer using the web browser control. Setting and adjustment of the projector . z Display of the projector status. z T ransmission of an E-mail message when there is a problem with the projector . z Note A LAN ...
-
Panasonic PT-VX501U - page 64
Network 64 - ENGLISH Settings Computer operation Connec tio n can b e made with w ired L A N. H owev er , c on rm to your system administrator on net work s etti ngs before chan ging any settings. T urn on t he computer . 1 ) Make the net work sett ing according to y our sys tem administrator . 2 ) If the proje ctor set tings ar e the default se ...
-
Panasonic PT-VX501U - page 65
Network ENGLISH - 65 Settings Description of each item J 1 Pag e sel ec t ion t ab s Click t he se to swi tch p ag es. 2 M oni tor i nfor m ati on bu t ton Click t his i t em, a nd th e st atu s of t he pr ojec to r is di spl ayed. 3 Proj ec tor c ont ro l but t on Click t his i t em to di spl ay th e proj ec tor c ont rol pag e. 4 D et ail ed set ...
-
Panasonic PT-VX501U - page 66
Network 66 - ENGLISH Settings Error information page J If [Erro r (Detail)] is display e d in the self- diagnosis info rmati on display column o n the [Proj ector st atus] screen, clic k the par t to display the details of the er ror . Depending o n the nature of the er ror , th e projec tor may be placed in t he standby mode fo r its own protec ti ...
-
Panasonic PT-VX501U - page 67
Network ENGLISH - 67 Settings Basic control page J T o move from another page, c lick [Proj ector c ontro l], then [ Basic c ontrol ]. 1 Power st an dby/on cont rol 2 U se th ese t o sele ct t he i npu t sign als 3 Volume a dju st 4 S wi tch es i mag e mod e 5 O p era tio n of A V mu te 5 4 3 2 1 Detail control page J Click [Proj ector c ontro l], ...
-
Panasonic PT-VX501U - page 68
Network 68 - ENGLISH Settings Network cong page J Y ou c an chang e net work set tings o n projec tor when c onne cting w ith the administ rator author it y . LAN settings z Click [ Detailed set up ] in the m enu. 1 ) Click [ Change ] to change th e L AN sett ings. 2 ) z T o ret urn to the pre vious win dow , click [Back ]. Complete the d etaile ...
-
Panasonic PT-VX501U - page 69
Network ENGLISH - 69 Settings Ping test page J This page makes it pos sible to che ck whethe r the net wor k is co nnected to th e e - mail ser ver , PO P ser ver , DN S ser ver , etc. Click [D etailed set up], then [Ping test] to display the Ping test page. Disp lay wh ich a pp ear s wh en t he co nne ct io n was suc ce ssf ul. Disp lay wh ich a p ...
-
Panasonic PT-VX501U - page 70
Network 70 - ENGLISH Settings E-mail set up page J With t his projec tor , if a prob lem oc cur s or if the lamp us age time re aches a set value, an e -m ail mess age c an be sent to one or more pr eset e - mail addres ses ( maximum t wo addresses ). Click [D etailed set up], then [E- mail set up] t o display the E-mail s etup page. 1 S el ec t En ...
-
Panasonic PT-VX501U - page 71
Network ENGLISH - 71 Settings E-mail set up page (continued) J 1 E nte r th e E- m ail Add re ss2 of your d esir ed re cip ien t . 2 S el ec t th e con dit io ns fo r send ing e - mail. M A IL CONTE NTS: Selec t [N ORM A L] or [SIMPLE]. ERROR : A n er ror is detec ted by self- diagnosis. L AM P RUNTI ME: Remaining lamp ser vice t ime has reach ed t ...
-
Panasonic PT-VX501U - page 72
Network 72 - ENGLISH Settings Contents of mail sent J Mail with the contents shown below is sent when the e-mail settings have z been established. == = Pa naso nic pro jector report ( CONFI GU R E) === Proj e ctor Ty p e : P T - V X5 00 Serial No : 000 000 00 0 -- -- - E-m ail setu p d ata -- -- - TE MPER ATU R E WA R NING SETUP MINIM U M TIM E at ...
-
Panasonic PT-VX501U - page 73
Network ENGLISH - 73 Settings Mail with the contents shown below is sent when an error has occurred. z == = Pa naso nic pro jector report (ER ROR ) == = Proj e ctor Ty p e : P T - V X5 00 Serial No : 000 000 00 0 -- -- - c he ck syste m --- -- FA N [ OK ] INTA K E AIR TE MPER ATU R E [ OK ] EXH AUS T AIR TE M PER ATU R E [ OK ] OPT IC S M ODUL E TE ...
-
Panasonic PT-VX501U - page 74
Network 74 - ENGLISH Settings Change Password page J Click [Change pas sword]. 1 Administ rator 2 User Administ rator m ode 1 Account 2 Cur re nt use r na me in put eld 3 Cur re nt pa ssword i npu t el d 4 N ew use r na me inp ut eld 5 N ew pa ssword i npu t el d 6 N ew pa ssword i npu t el d (re- en te r for conrmation) 7 B ...
-
Panasonic PT-VX501U - page 75
Network ENGLISH - 75 Settings CRSTRON RoomV iew page J Y ou c an monitor or c ontr ol the pr ojector usi ng Room View . T o display the operat ion page of RoomView from Web Contro l screen, ac ce ss with t he administrator r ights is required. ( The [CRESTRON RoomView] button is not displayed on the Web Control sc reen for us er ri ghts. ) When you ...
-
Panasonic PT-VX501U - page 76
Network 76 - ENGLISH Settings Info page Click Info on t he operati on page. 1 Proj ec tor n am e Displays the name of the p rojecto r . 2 M ac Add re ss Displays the M AC address. 3 Resolution Displays the reso lution of the p rojec tor . 4 L am p Hou rs Displays the lamp usag e time ( c onver ted value ). 5 Power St at us Displays the status of th ...
-
Panasonic PT-VX501U - page 77
ENGLISH - 77 Maintenance LAMP and W ARNING Indicators Managing the indicated problems If a problem should occur inside the projector , the <ON(G)/ST ANDBY(R)>, <LAMP> and/or <WARNING> indicators will inform you. Manage the indicated problems as follow . CAUTION Before you take a remedial measure, follow the procedure of switching ...
-
Panasonic PT-VX501U - page 78
78 - ENGLISH Maintenance Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect z the power plug from the wall outlet. ( Æ pages 26, 30) Be sure to observe the procedure “T uring off the projector” ( z Æ page 30) when performing power supply operation. Mai ...
-
Panasonic PT-VX501U - page 79
Replacement ENGLISH - 79 Maintenance R ese t t ing the Filter Count er J Be sure to reset the Filter counter after replacing the air lter units. ( Æ page 58" Filter counter reset ") Attention T urn off the power before you replace the air lter units. z When attaching the air lter unit, make sure that the projector is stable, and ...
-
Panasonic PT-VX501U - page 80
Replacement 80 - ENGLISH Maintenance J Lamp unit The lamp unit is a consumable component. Y ou can check the total usage time using Lamp runtime in the Information menu ( Æ page 60). It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer . Consult your dealer to purchase a replacement lamp unit (ET -LA V200). ...
-
Panasonic PT-VX501U - page 81
Replacement ENGLISH - 81 Maintenance J Replacing the Lamp unit CAUTION: When the projector is mounted on a ceiling, do not work with your face close to the projector . z Attach the lamp unit and the lamp cover securely . z When you experience difculty in installing the lamp, remove it and try again. If you use force to install the z lamp, the co ...
-
Panasonic PT-VX501U - page 82
Replacement 82 - ENGLISH Maintenance Attaching the Lens Cap When moving this projector or while not using it over an extended period of time, attach the lens cap. T o prevent loss for the lens cap, please according to the following procedures, attach the lens cap with the string of accessories. Thread the thinner end of the string through 1 ) the h ...
-
Panasonic PT-VX501U - page 83
ENGLISH - 83 Maintenance T roubleshooting Please check following points. For details, see the corresponding pages. Problem Cause Reference page Power does not turn on. The power cord may not be connected. z — No electric supply is at the wall outlet. z — The circuit breakers have tripped. z — I z s the <LAMP> indicator , <ON(G)/ST AN ...
-
Panasonic PT-VX501U - page 84
T roubleshooting 84 - ENGLISH Maintenance Problem Cause Reference page Picture from a computer does not appear . The cable may be longer than the optional cable. z — The external video output from a laptop computer may not be correct. z — Picture from a HDMI device does not appear or picture is not stable. Is the HDMI cable securely connected? ...
-
Panasonic PT-VX501U - page 85
ENGLISH - 85 Appendix T echnical Information PJLink protocol The net wor k funct ion of the p rojecto r suppor ts P JLink cl ass 1 , and t he P J Link protoc ol c an be use d to per fo rm projec tor sett ing and proje ctor st atus quer y op erations f rom a c omputer . Control commands J The followi ng table li sts the P JLink pr otocol c omm ands ...
-
Panasonic PT-VX501U - page 86
T echnical Information 86 - ENGLISH Appendix Control commands via LAN When WEB Control administrator rights password is set (Protect mode) J Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector and 1 ) make a request for connection to the projector . Acquire th e IP addres s from t he menu scre en o ...
-
Panasonic PT-VX501U - page 87
T echnical Information ENGLISH - 87 Appendix When WEB Control a dministrator rights password is not s et (Non-protect J mode) Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector and 1 ) make a request for connection to the projector . Acquire th e IP addres s from t he menu scre en of the proje cto ...
-
Panasonic PT-VX501U - page 88
T echnical Information 88 - ENGLISH Appendix Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specication, so that the projector can be controlled by a personal computer which is connected to this connector . Connection J Pin assignments and signal names J D-Sub 9-pin (female ...
-
Panasonic PT-VX501U - page 89
T echnical Information ENGLISH - 89 Appendix J Basic format T ransmission from the computer begins with STX, then the command, parameter , and ETX are sent in this order . Add parameters according to the details of control. STX C1 C2 C3 : P1 P2 Pn ETX When sending commands without parameters, a colon (:) is not necessary . : J Basic format (wit ...
-
Panasonic PT-VX501U - page 90
T echnical Information 90 - ENGLISH Appendix J Cable specications [When connected to a computer] Projector 1 NC NC 1 Computer (DTE specications) 2 2 3 3 4 NC NC 4 5 5 6 NC NC 6 7 7 8 8 9 NC NC 9 J Control commands When controlling the projector from a computer , the following commands are available: [Projector control command] Command Control ...
-
Panasonic PT-VX501U - page 91
T echnical Information ENGLISH - 91 Appendix Other terminals Pin assignments and signal names of <S-VIDEO IN> terminal J Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of <COMPUTER 1 IN/COMPONENT J IN> terminal Outside view Pin No. Signal names : ...
-
Panasonic PT-VX501U - page 92
T echnical Information 92 - ENGLISH Appendix List of compatible signals The following table species the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YP B P R , H = HDMI Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (H ...
-
Panasonic PT-VX501U - page 93
T echnical Information ENGLISH - 93 Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (Hz) P T- VW430U PT -VX500U PT -VX501U SXGA+ 1 400 x 1 050 63.970 60.190 107.990 A A C 65.350 60.120 122.850 A A 65.120 59.900 122.430 A A XGA 1 024 x 768 48.36 60.00 65.00 A AA ○ 68 ...
-
Panasonic PT-VX501U - page 94
T echnical Information 94 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (Hz) P T- VW430U PT -VX500U PT -VX501U WXGA 1 280 x 768 47.776 59.870 79.500 AA A C 60.289 74.893 102.250 AA A 68.633 84.837 1 17.500 AA A 55.993 69.991 94.964 AA A 57.675 72.004 97.81 ...
-
Panasonic PT-VX501U - page 95
T echnical Information ENGLISH - 95 Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (Hz) P T- VW430U PT -VX500U PT -VX501U D-WXGA 1 360 x 768 47.700 60.00 86.670 A A H 56.160 72.000 100.190 A A 1 366 x 768 46.500 50.000 67.400 A A 48.360 60.00 86.670 A A 1 376 x 768 4 ...
-
Panasonic PT-VX501U - page 96
96 - ENGLISH Appendix Specications Model No. PT -VW430U PT -VX500U PT -VX501U Power supply AC100 V - 240 V 50 Hz/60 Hz Power consumption 100 V - 240 V 4.0 A-1.6 A 365 W When [Standby mode] of [Setting] is set to [ECO]: 0.3W When [Standby mode] of [Setting] is set to [Network]: 1 1.5W or less When [Standby MIC out] of [Sound] is set to [On]: Max. ...
-
Panasonic PT-VX501U - page 97
Specications ENGLISH - 97 Appendix Model No. PT -VW430U PT -VX500U PT -VX501U T erminals COMPUTER 1 IN/ COMPONENT IN 1 (D-sub 15 pin female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω HD/SYNC TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatibl ...
-
Panasonic PT-VX501U - page 98
Ceiling mount bracket safeguards 98 - ENGLISH Appendix Dimensions <Unit : mm> 379.0 (14.92") 305.0 (12.01") 100.0 (3.94") 107.0 (4.21") 7.0 (0.28") 64.4 (2.54") Actual dimension may differ by product. : Ceiling mount bracket safeguards Installation work of the ceiling mount bracket should only be carried by a ...
-
Panasonic PT-VX501U - page 99
ENGLISH - 99 Appendix Index A About Y our Projector....................... 17 Accessories .................................... 15 Adjusting front adjustable feet ........ 24 Adjusting the position using the vertical lens shift function ............ 24 Attaching the Lens Cap .................. 82 AUTO PC adjust ............................. 41 Auto ...
-
Panasonic PT-VX501U - page 100
Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Panasonic Systems Communications Company of North America One Panasonic Way 2F-13, Secaucus, NJ 070 ...
Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Panasonic PT-VX501U, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Panasonic PT-VX501U. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Panasonic PT-VX501U.
Manuels d’utilsiation similaires
Manuel d’utilisation complet de l’appareil Panasonic PT-VX501U, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Panasonic PT-VX501U par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Panasonic PT-VX501U.
Le manuel d’utilisation complet Panasonic, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.
1. Introduction et des conseils sur la façon d'utiliser le manuel Panasonic PT-VX501U - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Panasonic PT-VX501U, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPanasonic PT-VX501U qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Panasonic PT-VX501U - qui devraient nous aider dans les premières étapes lors de l'utilisation Panasonic PT-VX501U
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Panasonic PT-VX501U
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Panasonic PT-VX501U dans un pays donné, si le problème ne peut être résolu par nous-mêmes.
Avez-vous une question à propos de Panasonic PT-VX501U?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Panasonic PT-VX501U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Panasonic PT-VX501U il est probable qu’il a envie de partager la façon de le résoudre.