Français dropdown-ico

Manuel d’utilisation Samsung HPM5027

34 pages 2.09 mb
Télécharger

Aller à la page of 34

Summary
  • Samsung HPM5027 - page 1

    BN68-00327A-00(ENG) Owner’ s Instructions HPM5027 ...

  • Samsung HPM5027 - page 2

    Thank you for choosing Samsung! Y our new Samsung product represents the latest in television technol- ogy . W e designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. W e are proud to offer you a product that will provide convenient, dependable ser vice and enjoyment for ye ...

  • Samsung HPM5027 - page 3

    User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the fol- lowing warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ...

  • Samsung HPM5027 - page 4

    Setup Y our New Plasma Display Panel ........................10 Remote Control Buttons ....................................12 Installing a rack on the PDP ..............................14 T urning the PDP On and Off..............................16 Connection (Connecting Speakers / Receiver) Connecting Speakers ...................................... ...

  • Samsung HPM5027 - page 5

    PLASMA DISPLA Y PANEL Setup Y our New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 Installing a rack on the PDP ..........................................................14 T urning the PDP On and Off ............................ ...

  • Samsung HPM5027 - page 6

    Remote Control Signal Receiver Aim the remote control towards this spot on the Monitor . • SOURCE button Press to display all of the available video sources (ie., Video, S-V ideo, Component1, Component2, PC ). • MENU button Displays the main on-screen menu. • VOL(+,-) button Press to increase or decrease the volume. Also used to adjust items ...

  • Samsung HPM5027 - page 7

    ı VCR control buttons Controls VCR tape functions: Stop, Rewind, Play/Pause, Fast For ward. ˜ SET button Use during setting up of this remote control, so that it will work compatibly with other devices (VCR, cable box, DVD, etc.) ¯ Clock set button Press to clock setting. ˘ PIP control buttons Source : Press to select one of the available signa ...

  • Samsung HPM5027 - page 8

    15 Installing a rack on the PDP 14 1 Install the rack on the swivel stand using screws. 2 Fasten the cover of the rack using screws as shown in figure. 3 Use the screws to fix the groove of the stand pole and the groove on top of the rack. 4 After installing the PDP on the stand pole, fasten the bottom using screws. ...

  • Samsung HPM5027 - page 9

    Displaying Status Information Press the Display button on the remote control. The PDP will display the Screen size, Resolution, Current time, and screen mode. Displaying Clock Press the Clock Display button on the remote control. The Current time will be displayed on the screen. 17 T urning the Monitor(PDP) On and Off T urning the Monitor(PDP) On a ...

  • Samsung HPM5027 - page 10

    PLASMA DISPLA Y PANEL Connection (Connecting Speakers / Receiver) Connecting Speakers ....................................................................20 Connecting a VCR/Cable Box ......................................................21 Connecting a DVD/Set-T op Box ....................................................22 ...

  • Samsung HPM5027 - page 11

    21 Connecting Speakers 20 Speaker Audio Cable Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP . • Y ou can attach the Ferrite Cores (supplied) to the both jacks of the Speaker audio cable. How to Connect Connecting a VCR/Cable ...

  • Samsung HPM5027 - page 12

    PLASMA DISPLA Y PANEL Picture Contr ol Customizing the Picture ................................................................24 Using Automatic Picture Settings ....................................................25 Viewing the Picture-in-Picture ..........................................................26 Changing the Screen Size ............... ...

  • Samsung HPM5027 - page 13

    Customizing the Picture Y ou can use the on-screen menus to change the Brightness, Contrast, Sharpness, Color , and Tint settings of your PDP . 25 1 Press the Menu button, then press the joystick to enter . 2 Move the joystick left or right to select the “Custom”, “Standard”, or “Mild” picture setting. • Y ou can select “High,” ? ...

  • Samsung HPM5027 - page 14

    V iewing the Picture-in-Picture 27 Selecting an External Signal Y ou can use PIP to view a signal from an external source, such as a VCR. 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter . 2 Move the joystick up or down to select the “Source”, then move the joystick left or right to ...

  • Samsung HPM5027 - page 15

    29 Wide Sets the picture to 16:9 wide mode. Panorama Use this mode for the wide aspect ratio of a panoramic picture. Zoom1 Magnify the size of the picture vertically on screen. Zoom2 Magnify the size of the picture more than Zoom1. Stretch Moves the Zoom2 picture up a little to fully show the bottom. Use this picture size if you want to view Zoom2 ...

  • Samsung HPM5027 - page 16

    Freezing the Picture 30 Still Press the Still button on the remote control to freeze a mov- ing picture into a still one. Press again to cancel. PLASMA DISPLA Y PANEL Sound Contr ol Customizing the Sound ................................................................32 Using Automatic Sound Settings ................................................ ...

  • Samsung HPM5027 - page 17

    33 Customizing the Sound 32 1 Press the Menu button. Move the joystick up or down to select the “ AUDIO ” , then press the joystick to enter . 2 Move the joystick left or right to select the “ Custom ” , “ Standard ” , “ Music ” , “ Movie ” or “ Speech ” sound setting. 3 Press the Menu button to exit. Note • The Automatic ...

  • Samsung HPM5027 - page 18

    PLASMA DISPLA Y PANEL Time Setting Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Setting the Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Using the Surr ound 34 1 Press the M ...

  • Samsung HPM5027 - page 19

    Setting the Clock 37 Y ou can set your PDP to automatically turn off after a preset inter val. 1 Press the Menu button. Move the joystick up or down to select “ TIME ” , then press the joystick to enter . 2 Move the joystick up or down to select the “ Sleep ” , then move the joystick left or right. 3 Move the joystick up or down to select t ...

  • Samsung HPM5027 - page 20

    Setting the Timers 39 6 Move the joystick up or down to select “ Off ” , then move the joystick left or right to select “ On ” . 7 If you want to set the Off Time, move the joystick down to select the “ Off Time ” . Set the “ Off Time ” just as you set the “ On T ime ” . • If you want to set the volume level when the PDP turns ...

  • Samsung HPM5027 - page 21

    PLASMA DISPLA Y PANEL Connecting PC and Operation Connecting to a PC ......................................................................42 Adjusting the PC Screen ................................................................46 Changing the Position of the Image ................................................47 Changing the Size of the Image ...

  • Samsung HPM5027 - page 22

    Pin Configuration • 15Pin Signal Cable (based on protruded pin) Setting up Y our Monitor Plug and Play Our adoption of the new VESA  Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Y our PC system can easi ...

  • Samsung HPM5027 - page 23

    45 44 How to Set up Y our Display Setting (Windows only) Notes: The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution of this monitor is 1366 X 768. Thus, select 1366 X 768 resolution in same way as below when you control the display setting, If your video card does not support 1366 X 768 resoution, ...

  • Samsung HPM5027 - page 24

    47 After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned. Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the “ SETUP ” , then press the joystick to enter . 2 Move the joystick left or right to select the “ Posi- tion ” , then adju ...

  • Samsung HPM5027 - page 25

    49 Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “ Zoom/Panning ” , then move the joystick left or right to enter . 3 Move the joystick left or right to enlarge the image. • The ...

  • Samsung HPM5027 - page 26

    51 Picture Automatic Adjustment On/Off Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “ Image Lock ” , then move the joystick left or right to enter . 3 Move the joystick up or down ...

  • Samsung HPM5027 - page 27

    53 Fine T uning (Phase) Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “ Image Lock ” , then move the joystick left or right to enter . 3 Move the joystick up or down to select the ...

  • Samsung HPM5027 - page 28

    55 54 Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP , then press the joystick to enter . 2 Move the joystick up or down to select the “ Miscel- laneous ” , then move the joystick left or right to enter . 3 Move the joystick up or down to select the “ Informa- ...

  • Samsung HPM5027 - page 29

    Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Setting the Multi Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Using the Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Setting up Y our Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Samsung HPM5027 - page 30

    Selecting a Menu Language 59 58 Setting the Multi Contr ol 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter . 2 Move the joystick left or right to select the appropri- ate language: English, Spanish, or French. 3 Press the Menu button to exit. SETUP Move Adjust Exit Language English M ...

  • Samsung HPM5027 - page 31

    This PDP's remote control can operate almost any VCR, cable box, or DVD. After it has been set up properly , your remote control can operate in four different modes: VCR, Cable, or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note:The ...

  • Samsung HPM5027 - page 32

    PLASMA DISPLA Y PANEL Appendix T roubleshooting ............................................................................64 Care and Maintenance ................................................................65 Specifications ..............................................................................66 62 Remote Control Codes VCR Codes Cable ...

  • Samsung HPM5027 - page 33

    65 64 T r oubleshooting Problem Poor picture. The power indicator is amber blinking. Y our Remote control does not operate the monitor . The monitor won ’ t turn on. There is no screen image. The image is too light or too dark. The image is too large or too small. Only the message "Check T emp" blinks on the screen and then the picture ...

  • Samsung HPM5027 - page 34

    67 66 Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been accepted as a device with proper electrowave and you can use this PDP not only in a residential a ...

Fabricant Samsung Catégorie Flat Panel Television

Les documents que nous recevons du fabricant de l'appareilSamsung HPM5027 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Samsung
- manuels d’utilisations HPM5027
- fiches produit Samsung
- dépliants
- ou étiquettes-énergie Samsung HPM5027
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Samsung HPM5027.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Samsung HPM5027, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Samsung HPM5027. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Samsung HPM5027.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Samsung HPM5027, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Samsung HPM5027 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Samsung HPM5027.

Le manuel d’utilisation complet Samsung, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Samsung HPM5027 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Samsung HPM5027, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSamsung HPM5027 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Samsung HPM5027 - qui devraient nous aider dans les premières étapes lors de l'utilisation Samsung HPM5027
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Samsung HPM5027
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Samsung HPM5027 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Samsung HPM5027?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Samsung HPM5027, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Samsung HPM5027 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)