Français dropdown-ico

Manuel d’utilisation NEC Plasma Monitor

36 pages 0.42 mb
Télécharger

Aller à la page of 36

Summary
  • NEC Plasma Monitor - page 1

    NEC Solutions (America), Inc. For the specifications of your plasma monitor , refer to “Model Information”. Operation Manual (Enhanced split screen Model) ...

  • NEC Plasma Monitor - page 2

    2 Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P AR TS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user ...

  • NEC Plasma Monitor - page 3

    3 your investment in this plasma monitor , please adhere to the following guidelines and recommendations for minimizing the occurrence of image burn: * Always enable and use your computer ’ s screen saver function during use with a computer input source. * Display a moving image whenever possible. * Change the position of the menu display from ti ...

  • NEC Plasma Monitor - page 4

    4 fabricant d é cline toute responsabilit é en cas de blessure corporelle ou de d é g â ts mat é riels r é sultant d ’ une op é ration d ’ entretien quelconque effectu é e par des personnes non qualifi é es ou r é sultant de l ’ ouverture du couvercle arri è re. S ’ adresser aux services apr è s-vente autoris é s. Pour é viter ...

  • NEC Plasma Monitor - page 5

    5 Contents Contents of the Package 䡺 Plasma monitor 䡺 Power cord 䡺 Remote control with two AAA Batteries 䡺 Manuals (Model Information and Operation) 䡺 Safety metal fittings* 䡺 Ferrite cores, bands 䡺 Cable clamps 䡺 HDMI-DVI cable * Contents will differ according to the model. * These are fittings for fastening the unit to a wall to p ...

  • NEC Plasma Monitor - page 6

    6 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") Y ou can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around th ...

  • NEC Plasma Monitor - page 7

    7 cables clamp mounting hole Appro x. 7m / 23ft How to use the remote control Battery Installation and Replacement Insert the 2 “AAA” batteries, making sure to set them in with the proper polarity . 1. Press and open the cover . 2. Align the batteries according to the (+) and (–) indication inside the case. 3.Replace the cover . Handling the ...

  • NEC Plasma Monitor - page 8

    8 q Power T urns the monitor ’ s power on and off. w Remote sensor window Receives the signals from the remote control. e POWER/ST ANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red. r INPUT SELECT / EXIT Switches the input. The available inputs depend on the setti ...

  • NEC Plasma Monitor - page 9

    9 A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity . Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels. Please refer to your speaker ’ s owner ’ s manual. C ...

  • NEC Plasma Monitor - page 10

    10 q POWER ON/ST ANDBY Switches the power on/standby . (This does not operate when POWER/ST ANDBY indicator of the main unit is off.) w OFF TIMER Activates the off timer for the unit. e DISPLA Y Displays the source settings on the screen. r WIDE Automatically detects the signal and sets the aspect ratio. W ide button is not active for all signals. ...

  • NEC Plasma Monitor - page 11

    11 Basic Operations POWER T o turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet. 2. Press the Power button (on the unit). The monitor ’ s POWER/ST ANDBY indicator turns red and the standby mode is set. 3. Press the POWER ON button (on the remote control) to turn on the unit. The monitor ’ s POWER/ST ANDBY indicator ...

  • NEC Plasma Monitor - page 12

    12 Wide Screen Operation (manual) W ith this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the WIDE button on the remote control. 2. W ithin 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → ANAMORPHIC → ST ADIUM → ZOOM → 2.35:1 → 14:9 When ...

  • NEC Plasma Monitor - page 13

    13 Information  Supported resolution See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor .  When 852 (848) dot  480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put Select an appropriate setting for R ...

  • NEC Plasma Monitor - page 14

    14 Information Split screen operations may not function depending on the combination of input signals. In the table below , “  ” means Y es, “  ” means No.  Split screen operations may not function depending on the type of the RGB signals. SPLIT SCREEN Operations VIDEO1 Sub screen Main screen RGB/PC1 A VIDEO1 Showing a couple of pi ...

  • NEC Plasma Monitor - page 15

    15 Operations in the Picture-in-picture mode T o move the position of the sub screen, press the cursor  or  button. T o change the size of the sub screen, press the  button. VIDEO1 RGB/PC1 A B VIDEO1 RGB/PC1 A B VIDEO1 RGB/PC1 A B VIDEO1 RGB/PC1 A B  butt on  butt on  butt on  butt on T o make the desired picture active, press ...

  • NEC Plasma Monitor - page 16

    16 Menu Operations The following describes how to use the menus and the selected items. 1. Press the MENU/ENTER button on the remote control to display the MAIN MENU. SEL. MENU/ENTER OK EXIT EXIT MAIN MENU PICTURE A UDIO IMA GE ADJ. SET UP FUNCTION SIGNAL INFO. 2. Press the cursor buttons ▲ ▼ on the remote control to highlight the menu you wish ...

  • NEC Plasma Monitor - page 17

    17 Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE PICTURE PICTURE MEMORY OFF/MEMORY1-6 YES 19 CONTRAST  ←→  0 ← 52 → 72 YES 19 BRIGHTNESS  ←→  0 ← 32 → 64 YES 19 SHARPNESS  ←→  0 ← 16 → 32 YES 19 COLOR  ←→  0 ← 32 → 64 YES 19 TINT R ←→ G 0 ← 32 → 64 YES 19 NR OFF/N ...

  • NEC Plasma Monitor - page 18

    18 *1 Only when AUTO PICTURE is OFF . *2 RGB/PC only Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE FUNCTION POWER MGT . ON ←→ OFF YES 26 INPUT SKIP ON ←→ OFF YES 26 SUB. P DETECT AUTO ←→ OFF YES 26 ZOOM NA V OFF ←→ S BY S ←→ BTM LEFT ←→ BTM RIGHT ←→ TOP RIGHT ←→ TOP LEFT YES 27 PICTURE FREEZE OF ...

  • NEC Plasma Monitor - page 19

    19 Picture Settings Menu Storing picture settings This function allows you to store in memory the current input signal and PICTURE menu settings and to recall these settings when necessary . There are six picture memories, and notes of up to 15 characters can be added to each. Example: Storing picture settings at MEMORY1 On “ PICTURE MEMOR Y ” ...

  • NEC Plasma Monitor - page 20

    20 Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting “ HIGH ” On “ COLOR TEMP . ” of “ PICTURE ” menu, select “ HIGH ” . SEL. ADJ. EXIT RETURN PICTURE PICTURE MEMOR Y CONTRAST BRIGHTNESS SHARPNESS COLOR TINT NR COLOR TEMP . GAMMA LO W TONE SET UP LEVEL COLOR TUNE CIN ...

  • NEC Plasma Monitor - page 21

    21 Adjusting the colors Use this procedure to adjust hue and color density for red, green, blue, yellow , magenta and cyan. Y ou can accentuate the green color of trees, the blue of the sky , etc. Example: Adjusting the color tune for blue On “ PICTURE ” menu, select “ COLOR TUNE ” , then press the MENU/ENTER button. The “ COLOR TUNE ” ...

  • NEC Plasma Monitor - page 22

    22 Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass On “BASS” of “AUDIO” menu, adjust the bass. SEL. ADJ. EXIT RETURN A UDIO BASS TREBLE BALANCE A UDIO INPUT1 A UDIO INPUT2 A UDIO INPUT3 : VIDE ...

  • NEC Plasma Monitor - page 23

    23 SET UP Settings Menu Setting the language for the menus The menu display can be set to one of eight languages. Example: Setting the menu display to “ DEUTSCH ” On “ LANGUAGE ” of “ SET UP ” menu, select “ DEUTSCH ” . SEL. ADJ. EXIT RETURN SET UP LANGU AGE BNC INPUT D-SUB INPUT HD SELECT RGB SELECT DVI SET UP COLOR SYSTEM BA CK GR ...

  • NEC Plasma Monitor - page 24

    24 Information 䡵 RGB SELECT modes One of these 7 modes must be selected in order to display the following signals correctly . AUTO: Select the suitable mode for the specifications of input signals as listed in the table “ Computer input signals supported by this system ” on page 7 of Model Information. STILL: T o display VESA standard signals ...

  • NEC Plasma Monitor - page 25

    25 Setting the screen size for S1/S2 video input If the S-video signal contains screen size information, the image will be automatically adjusted to fit the screen when this S1/S2 is set to AUTO. This feature is available only when an S-video signal is input via the VIDEO3 terminal. Example: Setting “ S1/S2 ” to “ AUTO ” On “ S1/S2 ” of ...

  • NEC Plasma Monitor - page 26

    26 Function Settings Menu Setting the power management for computer images This energy-saving (power management) function automatically reduces the monitor ’ s power consumption if no operation is performed for a certain amount of time. Example: T urning the power management function on On “POWER MGT .” of “FUNCTION” menu, select “ON” ...

  • NEC Plasma Monitor - page 27

    27 Reducing burn-in of the screen The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce burn-in of the screen. On “ PDP SA VER ” of “ FUNCTION ” menu, select “ MANUAL ” , then press the MENU/ENTER button. The “ PDP SA VER ” screen appears. SEL. ADJ. EXIT RETURN PDP ...

  • NEC Plasma Monitor - page 28

    28 PEAK BRIGHT Use this to activate the brightness limiter . Example: Setting “ PEAK BRIGHT ” to “ 75% ” On “ PEAK BRIGHT ” of “ PDP SA VER ” menu, select “ 75% ” . SEL. ADJ. EXIT RETURN PDP SA VER PEAK BRIGHT ORBITER INVERSE/WHITE SCREEN WIPER SOFT FOCUS OSM ORBITER OSM CONTRAST : 75% : OFF : OFF : OFF : OFF : ON : LO W Informa ...

  • NEC Plasma Monitor - page 29

    29 OSM ORBITER Use this to set OSM menu shift. Example: Setting “ OSM ORBITER ” to “ OFF ” On “ OSM ORBITER ” of “ PDP SA VER ” menu, select “ OFF ” . SEL. ADJ. EXIT RETURN PDP SA VER PEAK BRIGHT ORBITER INVERSE/WHITE SCREEN WIPER SOFT FOCUS OSM ORBITER OSM CONTRAST : 100% : OFF : OFF : OFF : OFF : OFF : LO W Information 䡵 OSM ...

  • NEC Plasma Monitor - page 30

    30 Application These specifications cover the communications control of the plasma monitor by external equipment. Connections Connections are made as described below . Connector on the plasma monitor side: EXTERNAL CONTROL connector . Use a crossed (reverse) cable. T ype of connector: D-Sub 9-pin male 1 5 9 6 2 34 7 8 Communication Parameters (1) C ...

  • NEC Plasma Monitor - page 31

    31 Remedy • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in temperature. This will not affect performance. • Leave some space between the display and the connected components. • Replace both batteries with new ones. • Plug the monitor ’s power cord into a power outlet. • Pr ...

  • NEC Plasma Monitor - page 32

    32 ...

  • NEC Plasma Monitor - page 33

    33 ...

  • NEC Plasma Monitor - page 34

    34 ...

  • NEC Plasma Monitor - page 35

    Copyright © by NEC Plasma Display Corporation NEC and the NEC logo are registered trademarks of NEC Corporation NEC Solutions, Inc. (hereinafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms and, subject to the conditions set forth below , agrees to repair or replace (at NEC Solu ...

  • NEC Plasma Monitor - page 36

    Printed on recycled paper Printed in Japan 7S801441 NE C S olutions ( America ) , Inc. 1250 N. Ar li n g ton H e igh ts R oa d, Su i te 400 I tasca , Illi n ois 60143 - 1248 ...

Fabricant NEC Catégorie Computer Monitor

Les documents que nous recevons du fabricant de l'appareilNEC Plasma Monitor peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques NEC
- manuels d’utilisations Plasma Monitor
- fiches produit NEC
- dépliants
- ou étiquettes-énergie NEC Plasma Monitor
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation NEC Plasma Monitor.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation NEC Plasma Monitor, manuels d’entretien, brefs manuels ou manuels de l’utilisateur NEC Plasma Monitor. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit NEC Plasma Monitor.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil NEC Plasma Monitor, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser NEC Plasma Monitor par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs NEC Plasma Monitor.

Le manuel d’utilisation complet NEC, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel NEC Plasma Monitor - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières NEC Plasma Monitor, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lNEC Plasma Monitor qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil NEC Plasma Monitor - qui devraient nous aider dans les premières étapes lors de l'utilisation NEC Plasma Monitor
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de NEC Plasma Monitor
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service NEC Plasma Monitor dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de NEC Plasma Monitor?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec NEC Plasma Monitor, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec NEC Plasma Monitor il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)