-
Haier HWM50-10H - page 1
Fuzzy Computerized Automatic Washing Machine User's manual This manual is for HWM50-10H Please read this manual carefully before using. Retain it for future reference. ...
-
Haier HWM50-10H - page 2
Names of the parts................................................................................................1 Safety precautions ............................................................................................. 2 Installation and adjustment ...................................................................................4 Prepar ...
-
Haier HWM50-10H - page 3
1 Meaning and description of th e symbols Names of the parts Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Content ...
-
Haier HWM50-10H - page 4
2 Safety precautions Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Keep the ...
-
Haier HWM50-10H - page 5
3 Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from dir ...
-
Haier HWM50-10H - page 6
4 Installa tion and adjustment The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Adjust the adjustable foot: Install the bottom plate After you open the package, please lean the washing machine gently dow ...
-
Haier HWM50-10H - page 7
5 How to change the direction of the drain hose Usage of the drain hose The drainage shall be smooth with the drain hose. 1.put the drain hose up to suitable position. Do not put it on ground 2.Do not step on or press the drain hose. The highest point Notes: the highest point of drain pipe should be higher than the water level of washing tub for av ...
-
Haier HWM50-10H - page 8
6 Water tap, suitable Water tap, not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. 3. Loosen the screw till the water tap can be accessed. Put the jointer of the water inlet hose on the tap. See to Figure 2. (If the tap diamet ...
-
Haier HWM50-10H - page 9
7 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer . 3.Fasten the nut. Swaying it gently to confirm if it's suitable. 1.Close the water tap. 2.Press t ...
-
Haier HWM50-10H - page 10
8 Pr eparation bef ore washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries. ...
-
Haier HWM50-10H - page 11
9 The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.0kg. The thickness, size, type of the cloth will influence the actual w ...
-
Haier HWM50-10H - page 12
STAN DARD JEANS GENTLE QUICK WASH SOAK WASH RINSE SPIN WA TER SELECTION LEVEL SELECTION PROGRAM SELECTION PROCEDURE 10 U se the operation buttons a. Description of the function of the buttons The user selects a suitable water level depending on the load. If "Quick" wash is selected, water level will indicate "2". After water lev ...
-
Haier HWM50-10H - page 13
SURPLUS MIN RESERVE HOURS LA TER CALEF ACTION AT I O N RESERV PA U S E ST AR T ON/OFF POWER T o indicate -- during sensing. T o indicate remaining min. During program running. T o indicate remaining reserved time (hrs) during reservation period. T o indicate fault symbols for abnormal conditions (see page 16) SURPLUS (MIN) Page 16 After the power i ...
-
Haier HWM50-10H - page 14
ST ANDARD JEANS GENTLE QUICK WASH SOAK WAS H RINSE SPIN SURPLUS MIN RESERVE HOURS LA TER WATER SELECTION LEVEL SELECTION PROGRAM SELECTION PROCEDURE CALEF ACTION A TION RESERV P AUSE ST ART ON/OFF POWER b. Operating procedure and e xplanations for the buttons After switching on, the "Sta ndard" program will be the default. If o ther full- ...
-
Haier HWM50-10H - page 15
Even there's no water in the tub, the spinning will star t after a certain period. Do not use soak process f or woolen laundrie s . Wash the laundries that are prone to lose color separately from other laundries. The pulsator w ill not rotate unless the water is fille d to selecte d water level. Selection method of the pro cedure pro gram s At ...
-
Haier HWM50-10H - page 16
After switching on, the washing machine reserved wash program will be automatically set i nactive. If you desire a wash cycle to end at a reserved time, you can press the " RESERVA TION/CALEFACTION ” button to set a reserved wash program. Refer to The butt on of " RESERVA TION/CALEFACTION " on page 1 1. When "Reservation" ...
-
Haier HWM50-10H - page 17
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). Please first pull off the power plug from the receptacle before cleaning. 5.Wipe off the wa ...
-
Haier HWM50-10H - page 18
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service departmen t of our company. Do not repair it by yourself. T r ouble ...
-
Haier HWM50-10H - page 19
User's manual Name Components of the water inlet ho se Bottom plate T apping screws One One One Eight One Quantity Inside the document bag Storage position Fuzzy computerized automatic washing machine Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the package cart ...
Avez-vous une question à propos de Haier HWM50-10H?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Haier HWM50-10H, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Haier HWM50-10H il est probable qu’il a envie de partager la façon de le résoudre.