Français dropdown-ico

Manuel d’utilisation LevelOne WPC-0100

32 pages 2.68 mb
Télécharger

Aller à la page of 32

Summary
  • LevelOne WPC-0100 - page 1

    1 LevelOne WPC - 0100 11Mbps Wireless PCMCIA Adapter User’s Guide Version:1.00 Please install the Utility/Driver first before inserting the PCMCIA Card. ...

  • LevelOne WPC-0100 - page 2

    2 FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, u ses, and can ...

  • LevelOne WPC-0100 - page 3

    3 Table of Contents 1 Introduction ........................................................................................................................................ 1 2 Installation ........................................................................................................................................ 2 2.1 Overview ......... ...

  • LevelOne WPC-0100 - page 4

    ...

  • LevelOne WPC-0100 - page 5

    1 1 Introduction Thank you for purchas ing ou r LevelOne WPC - 0100 11Mbps Wireless PCMCIA Adapter . It will be interoperable among IEEE 802.11b standard compliant products from other manufacturers and allows you to build a wireless LAN. Besides , you can use your PC to connect with an a ccess p oint wirelessly to share the wired network resource : ...

  • LevelOne WPC-0100 - page 6

    2 2 Installation 2.1 Overview In this chapter we will cover how to install the LevelOne WPC - 0100 11Mbps Wireless PCMCIA Adapter . To establish your wireless network connection , the following steps should be executed. 1. Install the software using the installation CD 2. Install the LevelOne WPC - 0100 11Mbps Wireless PCMCIA Adapter .. 3. Install ...

  • LevelOne WPC-0100 - page 7

    3 3. Please carefully read the “ Software License Agreement. “ If you accept t he cont rac t, click “Yes “ to move to the next screen. If not, click “ No “ to exit. 4. Please select the applications you would like to install, and click “ Next “. If you select “ Browse User Manual “ system will prompt a message to suggest you ins ...

  • LevelOne WPC-0100 - page 8

    4 5. Please choose your wireless device adapter , and click “ Next “. 6. The default destination folder is displayed in the setup dialog box. To change the default folder you can click “ Browse “ to set the destination folder. Click “ Next “ to go to the next screen. ...

  • LevelOne WPC-0100 - page 9

    5 7. Select the Program Folder for IEEE802.11b WLAN Utility and click “Next “. 8. You will be asked if you want to add an IEEE802.11b WLAN Utility shortcut to your desktop. Click “ Yes “. 9. The user manual is published in Port able Document Format (PDF ); we suggest you install Acrobat Reader to read it. If Acrobat Reader doesn ’ t exist ...

  • LevelOne WPC-0100 - page 10

    6 10. If yo u are sure to install Acrobat, click “ Yes “ and then system will guide you to enter the Acrobat Reader 3.0 setup program. Follow the setup procedure to complete the Acrobat Reader 3.0 installation. 11. The following page will remind you to instal l Microsoft network protocols for IEEE802.11b WLAN to work properly. If the network pr ...

  • LevelOne WPC-0100 - page 11

    7 12. The D river and Help files will be copied to the system. Wait for the setup program to finish the IEEE802.11b WLAN installation . Then select “ Yes “ and click “ Finish “ to complete the installation. It’s recommended to close other applications before reboot ing your system. 13. To instal l the PCMCIA Adapter, please refer to the c ...

  • LevelOne WPC-0100 - page 12

    8 Additional Note for Windows NT4.0 The installation procedure under Windows NT4.0 will be a little different from Windows 98 shown below. It will be change after step10 refer to the installation of Windows 98. 1. Click “ OK “ and system will auto - select I/O address and IRQ and remind you to choose the unused I/O address and IRQ from Windows ...

  • LevelOne WPC-0100 - page 13

    9 4. The Network properties page will appear automatically in the screen if you click “ Yes “ in the last step. You should choose “ LevelOne 11Mbps Wireless PCMCIA Adapter “ in the Network Adapter of upper menu and add necessary protoco ls, then click OK. 5. The Microsoft TCP/IP setting page will be prompted. You can use DHCP or manual set ...

  • LevelOne WPC-0100 - page 14

    10 Additional Note for Windows 2000 to install Packet Protocol You should add Packet Protocol under Windows 2000If the Packet Protocol doesn ’ t exist in your system. The installation procedure will be a little different from Windows 98. A message will be prompted to guide you to auto - install Packet Protocol. Follow the on – screen instructio ...

  • LevelOne WPC-0100 - page 15

    11 3. If Packet P rotocol installed successfully, you have to reboot your system and the IEEE802.11b Utility/driver installation under Windows 2000 is complete. 4. If the Packet Protocol installation has failed, a message will be prompted as follows. Click “ OK “ to continue next step. 5. System will give you an on - screen instruction as follo ...

  • LevelOne WPC-0100 - page 16

    12 2.3 Install the Adapter The IEEE802.11b WLAN driver and utilities are included on the accompanying installation CD. Please follow the installation procedures in Section 2.2. (Your will not work properly if the driver and utilities are not ins talled correctly.) Make sure that there is an empty PCMCIA slot for LevelOne 11Mbps Wireless PCMCIA Adap ...

  • LevelOne WPC-0100 - page 17

    13 2.4 Utility Startup Configuration LevelOne 11Mbps Wireless PCMCIA Adapte r has its own management software. User s can control all functions provided by the application named IEEE802.11b WLAN Utility. The Utility icon will appear in the working bar by clicking the IEEE802.11b WLAN Utility shortcut on your desktop. The definition of the color of ...

  • LevelOne WPC-0100 - page 18

    14 Configuration • It displays the configuration items that you can change under the AdHoc mode : Power Saving Mode, Ethernet Conversion and Data Transmission Rate. If the mode is Infrastructure, The Tx Rate will be fixed in “ Ful ly Auto “ and users can ’ t change it. Wired Equivalent Privacy • If you would like to enable WEP, the system ...

  • LevelOne WPC-0100 - page 19

    15 Country • Every cou n try has different l e gal frequency range. Please choose proper country setting. Under the infrastructure mode, the setting value will be determined by the Access Point and can ’ t be set by user s . 2.4. 2 Wi r eless LAN Neighborhood • T he Access Point SSID and Access Point MAC will appear in the screen if you choos ...

  • LevelOne WPC-0100 - page 20

    16 Link Information • The link information, includ ing the C urrent C hannel, T ransmission R ate, Transmission S tate, is revealed here. About • From this dialog box, you can get the details such as the MAC address and the version informati on of each S/W . ...

  • LevelOne WPC-0100 - page 21

    17 2.5 Uninstall the IEEE802.11b WLAN Utility / Driver 1. First you should remove the LevelOne 11Mbps Wireless PCMCIA Adapter. To safely remove your PC MCIA Adapter , we suggest you should follow the procedure below. Click the Start Menu, choose Settings – Control Panel, and click the PC MCIA Adapter icon. You will enter the PC MCIA Adapter Prope ...

  • LevelOne WPC-0100 - page 22

    18 2. To exit t he IEEE802.11b WLAN Utility , you should click the right bottom on the Utility icon in the working bar and select “ Exit “. 3. To uninstall the IEEE802.11b WLAN Utility and Driver, you can move to Start – Programs – IEEE802.11b WLAN Utility, and click “ IEEE802.11b Un - I nstallation “. 4. You will be asked if you want t ...

  • LevelOne WPC-0100 - page 23

    19 Additional Note for Windows NT4.0 The additional pages will be prompted as follows under the un - installation procedure on Windows NT 4.0 operating system. 1. A un - installation guide will be prompted as follows, just click “ OK “ and follow the steps on it. 2. The network properties page will be prompted automatically as follows, select ? ...

  • LevelOne WPC-0100 - page 24

    20 4. Make sure the LevelOne 11Mbps Wireless PCMCIA Adapter has been removed and click on “ Close “ , and then system will restart. Additional Note for Windows 2000 The following items should be noted : 1. Please don ’ t remove your PC MCIA Adapter unless the IEEE802.11b WLAN un - installation is complete d . 2. Make sure to exit the IEEE802. ...

  • LevelOne WPC-0100 - page 25

    21 3 Application To enable the sharing of the Internet access, you should set your IEEE802.11b WLAN mode as “ Infrastructure “ and connect to the access point (please refer to the chapter 2.4.1 “ S etting “ ) . When the procedure is complete d , an access point will appear on the Wireless LAN Neighborhood of IEEE802.11b WLAN Utility. D oubl ...

  • LevelOne WPC-0100 - page 26

    22 • If “ Read - Only “ is selected, the other users in the wireless network can only copy files from your folder. Copying files into your folder is not allowed. • If “ Full “ is selected, the other users in the wireless network have full access into your folder. They can copy to and from your folder as well as modify files. • You can ...

  • LevelOne WPC-0100 - page 27

    23 3.2 Printer Sharing in Windows 98 In orde r for a printer to be shared across the network, it has to be set as the network printer. Follow the instructions below to set a printer as a network printer: 1. Click the “ Start “ button, point to the “ Settings “, and then click “ Printers “. 2. In the Pr inters window, click the printer y ...

  • LevelOne WPC-0100 - page 28

    24 3.3 Using the shared folder 1. Double click the “ Network Ne ighborhood “ icon, and then double click the computer where the shared folder is located. 2. Double click the folder you want to connect to. 3. You may want to assign a drive letter for shared folder that you connect to. 4. In the “ Network Neighborhood “, double click the comp ...

  • LevelOne WPC-0100 - page 29

    25 4 Troubleshooting If you encounter some problems i nstalling the LevelOne WPC - 0100 11Mbps Wireless PCMCIA Adapter or you want to confirm whether your card is installed properly or not, refer to below the procedure after you have installed the card. 4.1 Check the Various Properties of the Adapter • Click th e “ Control Panel “ and then th ...

  • LevelOne WPC-0100 - page 30

    26 If any of these items are missing, please follow the instructions below to install them properly: Set up the Netwo rk Protocols : • Click “ Add “ and select “ Protocol “ on Network “ Configuration “. • Click “ Add “ and then choose the network protocol. Select Microsoft as the manufacturer and “ NetBEUI “, “ TCP/IP “, ...

  • LevelOne WPC-0100 - page 31

    27 • Select “ Microsoft “as the manufacturer and choose “ File and printer sharing for Microsoft Networks “ for network service; • Click “ OK “ to set the network service. 4.3 Others Wired Equivalent Privacy (WEP) If you set the WE P Pass phrase , which is the same as the Access Point (AP) in your LevelOne 11Mbps Wireless PCMCIA Ada ...

  • LevelOne WPC-0100 - page 32

    28 Additional Note for Windows NT4.0 1. If you are not the first time to install WLAN IEEE 802.11b Utility and driver under Windows NT4.0, t he follo wing message will be prompted during installation: “ NDIS3.0 Packet Driver has existed in the system. “ Click “ Yes “ to update the new driver. 2. If your WLAN Utility and driver can ’ t wor ...

Fabricant LevelOne Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilLevelOne WPC-0100 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques LevelOne
- manuels d’utilisations WPC-0100
- fiches produit LevelOne
- dépliants
- ou étiquettes-énergie LevelOne WPC-0100
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation LevelOne WPC-0100.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation LevelOne WPC-0100, manuels d’entretien, brefs manuels ou manuels de l’utilisateur LevelOne WPC-0100. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit LevelOne WPC-0100.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil LevelOne WPC-0100, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser LevelOne WPC-0100 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs LevelOne WPC-0100.

Le manuel d’utilisation complet LevelOne, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel LevelOne WPC-0100 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières LevelOne WPC-0100, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lLevelOne WPC-0100 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil LevelOne WPC-0100 - qui devraient nous aider dans les premières étapes lors de l'utilisation LevelOne WPC-0100
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de LevelOne WPC-0100
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service LevelOne WPC-0100 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de LevelOne WPC-0100?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec LevelOne WPC-0100, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec LevelOne WPC-0100 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)