Français dropdown-ico

Manuel d’utilisation Altinex 400-0026-004

24 pages 3.92 mb
Télécharger

Aller à la page of 24

Summary
  • Altinex 400-0026-004 - page 1

    MATRIX SWITCHERS HOMERUN SERIES MATRIX SWITCHERS USER’S GUIDE MANUAL PART NUMBER: 400-0026-004 PRODUCT REVISION: 2 ...

  • Altinex 400-0026-004 - page 2

    MATRIX SWITCHERS 1 INTRODUCTION Thank you for purchasing a HOMERUN Series Matrix Switcher. We are sure you will find it to be reliable and simple to use. The HOMERUN Series Matrix Switchers are designed using state-of-the-art technology and offer a unique combination of features not available anywhere else. We are committed to providing our custome ...

  • Altinex 400-0026-004 - page 3

    MATRIX SWITCHERS 2 PRECAUTIONS/SAFETY WARNINGS 1 Please read this manual carefully before using your HOMERUN Series Matrix Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your HOMERUN Series Matrix Switcher and to prevent fire and shock hazard. Please read them carefully and heed all w ...

  • Altinex 400-0026-004 - page 4

    MATRIX SWITCHERS 3 ABOUT YOUR HOMERUN MATRIX SWITCHER 2 The HOMERUN Matrix Switcher is a state-of-the-art product designed to route up to 16 inputs to 16 outputs. The HOMERUN Matrix Switcher consists of 1-U high rack wide modules. Combining multiple modules can create larger configurations. The HOMERUN Switcher is designed to switch Composite Video ...

  • Altinex 400-0026-004 - page 5

    MATRIX SWITCHERS 4 DIAGRAM OF FRONT/BACK PANEL 4 ...

  • Altinex 400-0026-004 - page 6

    MATRIX SWITCHERS 5 ...

  • Altinex 400-0026-004 - page 7

    MATRIX SWITCHERS 6 IN OUT LOOP CONTROL IN OUT LOOP CONTROL IN OUT LOOP CONTROL APPLICATION DIAGRAM 5 Single Video/Sync module can be used as a Composite Video or TTL/ECL Matrix Switcher. Two modules interconnected together can be used as an S-Video Matrix Switcher. Three interconnected modules can route any analog component video signals such as RG ...

  • Altinex 400-0026-004 - page 8

    MATRIX SWITCHERS 7 INSTALLING YOUR SWITCHER 6 Step 1. Stack together the modules that are required to form a matrix for switching the desired signals. Allow 1-U rack space every 4 units for air circulation. This will reduce heat build up and will prolong the life of your system. 16x16 RGBHV + Stereo Audio System Step 2. Connect the HOMERUN modules ...

  • Altinex 400-0026-004 - page 9

    MATRIX SWITCHERS 8 Figure 2: HOMERUN Video Module OPERATION 7 7.1 BACK PANEL MANUAL CONTROL Two switches (F1 and F2) are provided in the center of the back panel as shown below. During installation or troubleshooting these switches provide a simple manner of controlling the module from the back of the rack. Figure 3: Back Panel control switches SEL ...

  • Altinex 400-0026-004 - page 10

    MATRIX SWITCHERS 9 PRESS FUNCTION F1 Selects input (confirmed by “ON” LED) F2 Selects output (confirmed by “ON” LED) F1+HOLD Connects selected input to selected output F2+HOLD Connects selected input to selected output F1+F2 together (Press & Release) Resets selected input and output channels F1+F2+HOLD (Press & Hold) Resets switche ...

  • Altinex 400-0026-004 - page 11

    MATRIX SWITCHERS 10 This command sets a unique ID number to each HOMERUN module and allows control of multiple modules through a single RS-232 port . In order to control multiple modules independently with one RS-232 port, the unit ID is used. Setting the unit ID allows a user to send the same command to multiple modules, but the module processes t ...

  • Altinex 400-0026-004 - page 12

    MATRIX SWITCHERS 11 This command is used for programming the switcher. It should not be used as part of a program to operate the switcher. There is no feedback provided for this command. [ IkkOXXS] kk = input offset; 00 to 96 This command sets the maximum number of inputs on the HOMERUN Switcher without changing the maximum number of outputs. This ...

  • Altinex 400-0026-004 - page 13

    MATRIX SWITCHERS 12 2. Output offset is zero for both units. 3. The input offset must be set for all units except the first one. The offset for input should be the same as the last input number of the previous unit. 4. The number of inputs available on second unit for direct connection is the difference between the maximum number of inputs of the s ...

  • Altinex 400-0026-004 - page 14

    MATRIX SWITCHERS 13 [ERR], just the version number; for example [3.2] or [3.5]. [VISn] n = 1 Enable VIS n = 0 Disable VIS This command enables or disables vertical interval switching, if the option is installed on the HOMERUN Matrix Switcher. 7.2.3 CONTROL COMMANDS These control commands are used for controlling the switcher. They can be part of a ...

  • Altinex 400-0026-004 - page 15

    MATRIX SWITCHERS 14 command. The [UIDnE] command should be used to disable all levels and enable only the unit that needs to be controlled. This command can not be used with unit ID 0 or 1. For example, at power up, all units can be controlled. To control level 3 only, issue the command - [UID3E]. [IkkOmm] kk = input number 01 to 16 mm = output num ...

  • Altinex 400-0026-004 - page 16

    MATRIX SWITCHERS 15 This command selects the output to control. Once the output number to be controlled is set through this command, this output can be connected to several inputs. If output 00 is selected then disconnect all inputs to be specified through the connect command, [IkkOXXC]. [IkkOXXC] kk = input number 01 to 16 This command connects a ...

  • Altinex 400-0026-004 - page 17

    MATRIX SWITCHERS 16 where mm is the current input connected to the specified output. For example, the [IXXO02] command can return 04 indicating that input #4 is currently connected to output #2. [IXXO03] can return 00, which means that nothing is currently connected to output #3. [SW] - Switch The switch command immediately connects inputs and outp ...

  • Altinex 400-0026-004 - page 18

    MATRIX SWITCHERS 17 Press the RECALL button and hold for 2 seconds. The unit will beep and switch into the recall mode. This mode is indicated by the RECALL LED flashing slowly. Press INPUT 1 through INPUT 16 to recall the desired memory location. Output buttons do not work anymore in this operation. Press and hold the RECALL button for 2 sec. agai ...

  • Altinex 400-0026-004 - page 19

    MATRIX SWITCHERS 18 Set Baud Rate: Baud rate determines communication between the control system and HOMERUN Matrix Switchers and also the rate between individual modules of the HOMERUN . Setting all interconnected modules to the same baud rate is essential for proper operation of the complete system. It is recommended that baud rate is changed for ...

  • Altinex 400-0026-004 - page 20

    MATRIX SWITCHERS 19 end of the cable is connected to the RS-232 port of the HOMERUN Matrix Switcher. ALTINEX HOMERUN CONTROL PROGRAM 1 Follow Step 1 of previous option. 2. Load the HOMERUN control program on WINDOW 95 from the START UP button, PROGRAM option and Altinex tab. 3 Go to the SETUP TAB and verify that current baud rate is set at 2400 bau ...

  • Altinex 400-0026-004 - page 21

    MATRIX SWITCHERS 20 to be saved in any of the 16 available memories. RECALL Allows recalling the saved connections from memory 01 through 16. SPACE Reserved for future use. DELETE Reserved for future use. CLEAR Reserved for future use. Recall 01,02,03 Allows the end user to recall the first three settings by pressing just one button. ENTER To compl ...

  • Altinex 400-0026-004 - page 22

    MATRIX SWITCHERS 21 ACCESSORIES 8 Model No. Description RACK MOUNTING BRACKETS DA1292RM 19”-1U Rack mount ears for rack wide units TABLE MOUNT BRACKETS TM1277 3U High, 1 Rack-Wide 4 BNC TO 4 BNC COAXIAL CABLE CB4100MR Bulk cable 4 coaxes (500 ft minimum) CB4106MR 6 feet CB4112MR 12 feet CB4125MR 25 feet CB4150MR 50 feet CB4175MR 75 feet CB41100MR ...

  • Altinex 400-0026-004 - page 23

    MATRIX SWITCHERS 22 at the same time, can this be done with this product? a challenge to connect. 8 Can I use contact closure to control the switcher? No. The unit should be controlled using RS-232 commands or through the optional CP-01/CP-02/CP-03 9 Is the HOMERUN Switcher capable of controlling various projectors? It is not recommended in large s ...

  • Altinex 400-0026-004 - page 24

    MATRIX SWITCHERS 23 DOWNLOAD section from the Altinex website www.altinex.com . ALTINEX POLICY 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service. This warranty is limited to repairing at company’s factory any part or parts of the product, which upon company’s e ...

Fabricant Altinex Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilAltinex 400-0026-004 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Altinex
- manuels d’utilisations 400-0026-004
- fiches produit Altinex
- dépliants
- ou étiquettes-énergie Altinex 400-0026-004
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Altinex 400-0026-004.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Altinex 400-0026-004, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Altinex 400-0026-004. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Altinex 400-0026-004.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Altinex 400-0026-004, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Altinex 400-0026-004 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Altinex 400-0026-004.

Le manuel d’utilisation complet Altinex, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Altinex 400-0026-004 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Altinex 400-0026-004, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAltinex 400-0026-004 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Altinex 400-0026-004 - qui devraient nous aider dans les premières étapes lors de l'utilisation Altinex 400-0026-004
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Altinex 400-0026-004
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Altinex 400-0026-004 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Altinex 400-0026-004?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Altinex 400-0026-004, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Altinex 400-0026-004 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)