Français dropdown-ico

Manuel d’utilisation Stovax PR0741

34 pages 1 mb
Télécharger

Aller à la page of 34

Summary
  • Stovax PR0741 - page 1

    Logic E-box ™ Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Eire) IMPORTANT The chimney must be swept before installation. Do not attempt to burn rubbish on this fire. This fire must only be operated with the glass window secured firmly in position. The front casing of this fire will become hot whilst in op ...

  • Stovax PR0741 - page 2

    2 CONTENTS PAGE APPLIANCE COMMISSIONING CHECKLIST 3 USER INSTRUCTIONS 4 INSTALLATION INSTRUCTIONS 11 Technical Specification for E-Studio 11 Technical Specification for Logic E-Box 12 Site Requirements 14 Installation 16 Commissioning 23 SERVICING INSTRUCTIONS 24 Servicing Requirements 24 Fault Finding 26 Replacing Parts 28 Spare Parts List for E-S ...

  • Stovax PR0741 - page 3

    FLUE CHECK PASS FAIL 1. Flue is correct for fire 2. Flue flow test 3. Spillage test GAS CHECK 1. Gas soundness & let by test 2. Standing pressure test mb 3. Fire working pressure (on High Setting) mb NB All other gas fires must be operating on full 4. Gas rate m 3 /h 5. Does ventilation meet fire requirements 6. Have controls been upgraded (Upg ...

  • Stovax PR0741 - page 4

    USER INSTRUCTIONS 4 1. GENERAL 1.1 Installation and servicing must only be carried out by a competent person. 1.2 In all correspondence, please quote the fire type and serial number, which can be found on the data badge adjacent to the control knob. 1.3 Ensure that curtains are not positioned above the fire, and that there is a 300mm minimum cleara ...

  • Stovax PR0741 - page 5

        MAKE SURE THE FIRE AND SURROUND ARE COOL BEFORE TRYING TO CLEAN. 5.1 Remove the glass window by unscrewing the four screws in the retaining bracket, Diagram 2. 2 AR1767 E-STUDIO 5.2 To clean the glass surface, Gazco recommends you use a ceramic glass product generally sold ...

  • Stovax PR0741 - page 6

    USER INSTRUCTIONS 6 7.2 Lean the granite chippings against the burner ledges to disguise the ledges. 5 AR1769 7.3 Check that the port area. Arrow A, is clear of granite chippings. This can be easily done by gently running a screwdriver or similar object along this area. Diagram 6. NOTE: IT IS IMPORTANT THE GRANITE CHIPPINGS DO NOT COVER THE PORT AR ...

  • Stovax PR0741 - page 7

       ARRANGEMENT OF FUEL BED COMPONENTS ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS The fuel effect and side panels in this fire are made from Refractory Ceramic Fibre (RCF), a material which is commonly used for this application. Preventive clothing is not required when handling these articles, but we r ...

  • Stovax PR0741 - page 8

    USER INSTRUCTIONS 8 8.9 Place another two medium size coals resting behind the first three coals and against the flame baffle, Diagram 17. 17 AR1366 8.10 Place a small coal directly behind the first large coal, and in between the centre of the last two medium coals resting on the flame baffle, Diagram 18. AR1367  8.11 Place two small coals to ...

  • Stovax PR0741 - page 9

    9 USER INSTRUCTIONS Pebble Layout 8.12 Position the pebble flame baffle centrally on the tray and ensure the stepped lower edge engages against the rear edge of the burner skin, Diagram 20. 20 AR1406 8.13 Place the front pebble piece centrally in the channel at the front of the tray, Diagram 21. 21 AR1407 8.14 Place the four pebbles as identified r ...

  • Stovax PR0741 - page 10

        The fire is fitted with an oxygen sensitive pilot system that will act to cut off the gas supply to the fire should the oxygen in the room fall below its normal level. If the fire is turned off by this device, it usually indicates that there is a problem with the f ...

  • Stovax PR0741 - page 11

    INSTALLATION INSTRUCTIONS TECHNICAL SPECIFICATION 11 APPLICABLE FRAME & FRONT COMBINATIONS FINISH ARTS FRAME ARTS FRONT Black 8283MB 8282MB Brass 8283PBR 8282PBR Brushed Steel 8283BS Polished Steel 8283P Highlight Polished 8282HP Chrome 8282P GAS CATEGORY I 2H I 3P Natural Propane Gas Type G20 G31 Working Pressure 20mbar 37mbar Gross Input kW H ...

  • Stovax PR0741 - page 12

    INSTALLATION INSTRUCTIONS TECHNICAL SPECIFICATION 12 APPLICABLE FRONTS Front Part Number Designio 8272MA, 8272IR, 8272GP Evolution 8258BS 8258MB Infinity 8256BS Progress 8253MA, 8253IR Richmond 8679 Dimension 8680MB APPLICABLE FRAME & FRONT COMBINATIONS FINISH ** ARTS FRAME ARTS FRONT HOLYROOD SPANISH Black 8283MB 8282MB 8693MB 8694MB Brass 828 ...

  • Stovax PR0741 - page 13

    INSTALLATION INSTRUCTIONS TECHNICAL SPECIFICATION   DIMENSIONS SIDE VIEW MINIMUM DEBRIS COLLECTION        ? ...

  • Stovax PR0741 - page 14

    1. FLUE AND CHIMNEY REQUIREMENTS 1.1 The chimney or flue system must comply with the rules in force, and must be a minimum of 125mm (5”) in diameter. Precast flues must conform to BS1289: 1986. The cross sectional area of the flue must be 16500 mm 2 wi t h a minimum dimension of 90mm. *When fitting the fire to a precast flue, the total minimum de ...

  • Stovax PR0741 - page 15

    15 INSTALLATION INSTRUCTIONS SITE REQUIREMENTS 2.5 Ensure that no naked flame or incandescent part of the fire bed projects beyond the vertical plane of the fireplace opening. 2.6 The fire must not be installed in any room that contains a bath or shower. 2.7 Ensure clearances to combustible materials - see diagram 3. 3 Dimensions given are to the f ...

  • Stovax PR0741 - page 16

    T O CHANGE FROM ONE GAS TYPE TO ANOTHER A COMPLETE ENGINE ASSEMBLY AND DATA BADGE WILL BE      4.1 Before installation, ensure that the local distribution conditions (identification of the type of gas and pres ...

  • Stovax PR0741 - page 17

    17 5.3 Decide on the retention method. If cable fixings are to be used remove the lower cover plate by unscrewing the three screws., Diagram 3. 3 AR1376 Then remove the two knockout holes on the rear of the box using a sharp hammer blow, Diagram 4. 4 AR1369 5.4 Remove the backing from the self-adhesive silicone sealing strip and apply to the rear f ...

  • Stovax PR0741 - page 18

    INSTALLATION INSTRUCTIONS INSTALLATION 10 6.14 Turn the appliance off, disconnect the “U” gauge and replace the sealing screw. Relight the appliance and check the sealing screw for leaks. 7. FITTING THE DECORATIVE INNER PANEL 7.1 By rotating the panel, insert into fire box, Diagram 11. 11 AR1880 7.2 Check that the panel is sitting behind the re ...

  • Stovax PR0741 - page 19

    NOTE: IT IS IMPORTANT TO ENSURE THAT THE PANEL LOCATES TIGHTLY AGAINST THE BURNER TRAY. 13 AR1931    ARRANGEMENT OF FUEL BED COMPONENTS ONLY USE THE CORRECT TYPE AND QUANTITY OF GRANITE CHIPPINGS. ALWAYS FOLLOW THE FUEL BED LAYOUT AS STATED IN THESE INSTRUCTIONS. NEVER CHANGE THE LAYOUT FROM THAT SHOWN HERE. 8.1 ...

  • Stovax PR0741 - page 20

    INSTALLATION INSTRUCTIONS INSTALLATION 20    ARRANGEMENT OF FUEL BED COMPONENTS ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS The fuel effect and side panels in this fire are made from Refractory Ceramic Fibre (RCF), a material which is commonly used for this application. Preventive clothing is not requi ...

  • Stovax PR0741 - page 21

    INSTALLATION INSTRUCTIONS INSTALLATION 21 AR1363 23 9.6 There are three sizes of coal used. Small, medium and large, Diagram 24 for identification. 24 AR1379 LA RGE ME DIU M SM ALL 9.7 Place the single large coal in the depression in centre of the front coal resting against the flame baffle., Diagram 25. 25 AR1364 9.8 Place a medium size coal eithe ...

  • Stovax PR0741 - page 22

    Pebble Layout 9.12 Position the pebble flame baffle centrally on the tray and ensure the stepped lower edge engages against the rear edge of the burner skin, Diagram 30 30 AR1406 9.13 Place the front pebble piece centrally in the channel at the front of the tray, Diagram 31. 31 AR1407 9.14 Place the four pebbles as identified resting between the fr ...

  • Stovax PR0741 - page 23

    23 INSTALLATION INSTRUCTIONS INSTALLATION / COMMISSIONING 10. LIGHTING THE FIRE 10.1 Locate the control valve on the fire. There are two control knobs on the valve, the right-hand knob controls the pilot ignition and the left hand knob controls the main burner. 10.2 If your fire has already been upgraded to battery remote control, please refer to t ...

  • Stovax PR0741 - page 24

    SERVICING INSTRUCTIONS SERVICING 24 1. SERVICING REQUIREMENTS This fire must be serviced at least once a year by a competent person. All tests must be serviced by best practice as described by the current CORGI recommendations. 1.1 Before any tests are undertaken on the fire, conduct a gas soundness test for the property to ensure that there are no ...

  • Stovax PR0741 - page 25

    1.16 Carefully remove the enamel back panel by rotating it out of the fire box. 4 AR1931      PANELS NOT TO SCRATCH OR CHIP THE PANEL ON     ? ...

  • Stovax PR0741 - page 26

    SERVICING INSTRUCTIONS FAULT FINDING CHARTS 26 IGNITIONFUNCTIONAL CHECK 1 PILOT WILL NOT LIGHT Ensure there is no debris around the pilot assembly, e.g. coal, soot, etc which could short the spark, clean the area. Check for fluff in the pilot aeration hole. See diagram 10. There is a blockage in the system, check the inlet test point, the ...

  • Stovax PR0741 - page 27

    SERVICING INSTRUCTIONS FAULT FINDING CHARTS 27 FLAME FAILUREFUNCTIONAL CHECK PILOT WILL NOT STAY LIT OR FIRE GOES OUT If the fire goes out in use continually, this may mean that the oxygen depletion sensor has been activated. The fire should not be used until the cause has been found and rectified. Ensure there is no debris around the pilo ...

  • Stovax PR0741 - page 28

    SERVICING INSTRUCTIONS REPLACING PARTS 28 1. GENERAL 1.1 To service any of the following parts of the fire, it will be necessary to remove the burner unit from the firebox. To remove the burner refer to previous section SERVICING . 1.2 The heat shield will need to be removed from the burner for servicing. To do this remove the five screws indicated ...

  • Stovax PR0741 - page 29

    29 7 AR1779 C   4.5 Gently pull the ignition lead off the electrode, Diagram 8, Arrow A. 4.6 Remove the two screws securing the pilot assembly, Diagram 8 Arrow B.  AR1374 A B     4.7 Undo the thermocouple connection at the back of the gas valve and ...

  • Stovax PR0741 - page 30

    4.8 Replace with a new pilot assembly and check the spark gap, Diagram 10. 10 AR0097 4.9 After reassembly, check for gas soundness and carry out a flame failure functional check as detailed in the flow chart, especially the mag drop out time. 5. GAS VALVE 5.1 Disconnect the 2x8mm and 1x4mm gas pipe fittings at the back of the gas valve and also dis ...

  • Stovax PR0741 - page 31

    LPG PARTS MAIN INJECTOR IN0065 PILOT ASSEMBLY PI0037 AERATION PLATE (LPG) GZ3270 GAS VALVE GC0088 MISCELLANEOUS IGNITION LEAD GC0090 MAG UNIT GC0092 CONTROL COVER GC0087 UPGRADEKITSTANDARD 8455 UPGRADEKITTHERMOSTATIC 8456 PILOT SHROUD GZ6370        ...

  • Stovax PR0741 - page 32

    32 SERVICE RECORDS 1ST SERVICE Date of Service:........................................................................... Next Service Due:....................................................................... Signed:........................................................................................ Dealer's Stamp/CORGI Registration Num ...

  • Stovax PR0741 - page 33

    33 ...

  • Stovax PR0741 - page 34

    Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Tel: (01392) 261999 Fax: (01392) 444148 E-Mail: info@gazco.com ...

Fabricant Stovax Catégorie Indoor Fireplace

Les documents que nous recevons du fabricant de l'appareilStovax PR0741 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Stovax
- manuels d’utilisations PR0741
- fiches produit Stovax
- dépliants
- ou étiquettes-énergie Stovax PR0741
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Stovax PR0741.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Stovax PR0741, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Stovax PR0741. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Stovax PR0741.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Stovax PR0741, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Stovax PR0741 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Stovax PR0741.

Le manuel d’utilisation complet Stovax, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Stovax PR0741 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Stovax PR0741, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lStovax PR0741 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Stovax PR0741 - qui devraient nous aider dans les premières étapes lors de l'utilisation Stovax PR0741
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Stovax PR0741
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Stovax PR0741 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Stovax PR0741?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Stovax PR0741, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Stovax PR0741 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)