-
Optoma Technology 1080p DLP - page 1
English 1 T ab le of c o n ten t s T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information ..................................................................................... ...
-
Optoma Technology 1080p DLP - page 2
2 U s a g e N o t ice Safety Information The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an e ...
-
Optoma Technology 1080p DLP - page 3
English 3 U s a g e N o t ice Precautions Please follow all warnings, precautions and mainte- nance as recommended in this user’s guide. When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on ...
-
Optoma Technology 1080p DLP - page 4
4 U s a g e N o t ice Do: ▀ ■ Turn off the product before cleaning. ▀ ■ Use a soft cloth moistened with mild detergent to clean the display housing. ▀ ■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: ▀ ■ Block the slots and openings on the unit provided for ventila- tion. ...
-
Optoma Technology 1080p DLP - page 5
English 5 U s a g e N o t ice Eye Safety Warnings ▀ ■ Avoid staring directly into the projector beam at all times. ▀ ■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀ ■ A stick or laser pointer is recommended to avoid the need for the user to enter the beam. ▀ ■ Ensure that projectors are lo ...
-
Optoma Technology 1080p DLP - page 6
6 I n t rod uct io n Product Features This product is a 1080p single chip 0.95” DLP ® projector. Out- standing features include: ▀ ■ Native 16:9 1080p DLP ® Technology ▀ ■ Complete 10-bit video processing (decoding, deinterlac- ing, scaling, image enhancement and color) ▀ ■ Use 7 segment color wheel R/G/B/ND/R/G/B cycle ▀ ■ Pixe ...
-
Optoma Technology 1080p DLP - page 7
English 7 I n t rod uct io n Power Cord 1.8m IR Remote Controller Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Documentation : User’s Manual Warranty Card Quick Start Card Due to the difference in applications for ...
-
Optoma Technology 1080p DLP - page 8
8 I n t rod uct io n 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Elevator Button (one on each side) 5. Elevator Feet 6. Zoom Lens 7. IR Receivers 8. Connection Ports 9. Power Socket 10. Tilt-Adjustment Feet 11. Air exhaust vent Main Unit Product Overview 3 5 5 4 6 11 8 10 10 2 7 7 5 9 1 10 7 1 ...
-
Optoma Technology 1080p DLP - page 9
English 9 I n t rod uct io n Control Panel 1. Power and IR Receiver 2. Power Indicator LED 3. Lamp Indicator LED 4. Temp Indicator LED 5. Menu (On/Off) 6. Four Directional Select Keys 7. Source Select 8. Re-Sync 9. Enter 4 3 2 6 5 7 8 9 1 ...
-
Optoma Technology 1080p DLP - page 10
10 I n t rod uct io n Connection Ports 1. +12V Relay Connector 2. Composite Video Input Connector 3. RS232 Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital and DVI-HDCP) 6. HDMI 1 Connector 7. HDMI 2 Connector 8. Component Video Input Connector 9. Power Socket 10. Kensington Microsaver TM Lock Port 6 5 4 1 10 9 8 2 3 ...
-
Optoma Technology 1080p DLP - page 11
English 11 I n t rod uct io n Remote Control 1. Power (On/Off) 2. Contrast 3. Gamma 4. Brite Mode 5. Image Shift 6. Enter 7. Four Directional Select Keys 8. Display Mode 9. Edge Mask 10. Brightness 11. Image AI 12. IRIS 13. Menu 14. Overscan 15. 4:3 16. 16:9 17. HDMI1 Source 18. YPbPr Source 19. Letter-Box 20. Native 21. DVI Source 22. Composite Vi ...
-
Optoma Technology 1080p DLP - page 12
12 I n stall ation Connecting the Projector Due to the difference in applications for each country, some regions may have different ac- cessories. S-Video Output Video Output DVD Player, Set-top Box, HDTV receiver RGB 1. ............................................................................................................. Power Cord 2. ..... ...
-
Optoma Technology 1080p DLP - page 13
English 13 I n stall ation Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red. 3. Turn on the lamp by pressing “ ” button on the control panel. And the Power LED will turn blue. The startup screen will display in approximately 30 seconds. T ...
-
Optoma Technology 1080p DLP - page 14
14 I n stall ation Warning Indicator ▀ ■ When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service centre. See page 47. ▀ ■ When the “TEMP” indicator flashes red, it indicates the pro- jector has overheated. The projector will automatically shut itse ...
-
Optoma Technology 1080p DLP - page 15
English 15 I n stall ation Adjusting the Projected Image Adjusting the Projector’s Height Tilt-Adjustment Feet Elevator Feet The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the el ...
-
Optoma Technology 1080p DLP - page 16
16 I n stall ation L H' H (1920X1080) A B (1920X1080) W 0 (1920X1080) W 1 (1440X1080) D (1920X1080) Focus Ring Zoom Lever Adjusting the Projector’s Zoom / Focus Turn the Zoom Lever to zoom in or zoom out. To focus the image, turn the focus ring until you see a clear image. The projector will focus at distances from 4.9 to 39.4 feet (1.5 to 1 ...
-
Optoma Technology 1080p DLP - page 17
English 17 U s e r Con t ro l s Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 13-14. Source Press “Source” to choose DVI, RGB, Com- ponent-p, Component-i, S-Video, Compos- ite V ...
-
Optoma Technology 1080p DLP - page 18
18 U s e r Con t ro l s Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Brightness Adjust the brightness of the image. Contrast Control the degree of difference between the lightest and darkest parts of the picture. Image AI Switch the Image AI function ON/OFF. (refer to page 32-33) Gamma There a ...
-
Optoma Technology 1080p DLP - page 19
English 19 U s e r Con t ro l s 16:9 Scale the image at a 16:9 aspect ratio. Native The input source will be displayed without scaling. Letter-Box Enable the viewing of the letterboxed non- anamorphically enhanced movie at full screen width. Part of the original image will be lost if the image aspect ratio is less than 2.35:1. DVI Press “DVI” t ...
-
Optoma Technology 1080p DLP - page 20
20 U s e r Con t ro l s The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2 When OSD is displayed, use keys to select any ...
-
Optoma Technology 1080p DLP - page 21
English 21 U s e r Con t ro l s Menu Tree 1 English Current/All IRIS On/ ( 1~16 ) Off On/Off Reset Ima g e AI Menu Location SYSTEM Phase/Trackin g /H Position/V Position Y Gain/Pb Gain/Pr Gain/ Y Bias/Pb Bias/Pr Bias Hi g h Altitude On/Off Si g nal V Ima g e Shif t Ed g e Mas k English/Deutsch/Français/Italiano/Español/ Português/Polski/Nederlan ...
-
Optoma Technology 1080p DLP - page 22
22 U s e r Con t ro l s Image Mode There are many factory presets optimized for various types of im- ages. Cinema: For home theater. Bright: For the brightest possible image, Use if ambient light is present. TV: For watching analogue or digital TV images. sRGB: For standard color. User: Memorize user’s settings. Contrast The c ...
-
Optoma Technology 1080p DLP - page 23
English 23 U s e r Con t ro l s Tint Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Sharpness Adjusts the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. ...
-
Optoma Technology 1080p DLP - page 24
24 U s e r Con t ro l s Noise Reduction The motion Adaptive Noise Reduction reduces the amount of vis- ible noise interlaced signals. The range is from “0 ” to “5”. (0:Off) Gamma This unit comes with 10 preset gamma curves. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image outpu ...
-
Optoma Technology 1080p DLP - page 25
English 25 U s e r Con t ro l s pre-set modes that allow the user to switch among the pre-sets to obtain different image effects. (0:Off/1:On) Color Temp. Adjust the color temperature. At cold temperature, the screen looks colder; at warm temperature, the screen looks warmer. 1) For User mode adjustment, put cursor on “User”, and press “Enter ...
-
Optoma Technology 1080p DLP - page 26
26 U s e r Con t ro l s Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources not enhanced for Wide- screen TV. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Widescreen TV. Native: This format displays the original image without any scal- ing. Display Input ...
-
Optoma Technology 1080p DLP - page 27
English 27 U s e r Con t ro l s LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution. Detail informations about LBX mode : 1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look right when dis- played in 16:9 mo ...
-
Optoma Technology 1080p DLP - page 28
28 U s e r Con t ro l s V Keystone Press the or to adjust image distortion vertically and makes a squarer image. ...
-
Optoma Technology 1080p DLP - page 29
English 29 U s e r Con t ro l s Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred lan- guage. Press “Select (Enter)” to finalize the selection. Input Source Enable input sources. Press or into the next menu as below and then use or to select. Press “Select (Enter)” to fi ...
-
Optoma Technology 1080p DLP - page 30
30 U s e r Con t ro l s High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Power Off Sets the interval of power-off of the system, if there is no signal input. (In minutes) RGB Source HDTV Source Video Source Signal Phase: Cha ...
-
Optoma Technology 1080p DLP - page 31
English 31 U s e r Con t ro l s Tint : Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Y Gain : Adjust the gain of Y. Pb Gain : Adjust the gain of Pb. Pr Gain : Adjust the gain of Pr. Y Bias : Adjust the bias of Y. Pb Bi ...
-
Optoma Technology 1080p DLP - page 32
32 U s e r Con t ro l s Menu Location Choose the menu location on the display screen. Projection Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling When you select this function, the projector turns the imag ...
-
Optoma Technology 1080p DLP - page 33
English 33 U s e r Con t ro l s with the most dark details revealed, vivid and bright image performed all the way. Off: The dynamic image performance manager is on standby. IRIS The iris function adjusts the contrast optically by opening and closing the lens aperture. The iris can be switched between Off (Close) and On (Open). When you press th ...
-
Optoma Technology 1080p DLP - page 34
34 U s e r Con t ro l s 12V Trigger STD: When “STD” is selected, 12V Trigger will send 12V when projector turn on. LBX: When 12V trigger set as “LBX” -- 1. Format change to “LBX”,12V trigger port will send 12V. 2. Format is “4:3”, “16:9”, or “Native”, 12V trigger port won’t send 12V, it will be 0V. ...
-
Optoma Technology 1080p DLP - page 35
English 35 U s e r Con t ro l s Lamp Hour Displays the cumulative lamp operating time. Lamp Remind er Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp. Brite Mode Choose “On” to increase the brightness. Choose “Off? ...
-
Optoma Technology 1080p DLP - page 36
36 A pp endic es Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed. Please refer to the “Replacing th ...
-
Optoma Technology 1080p DLP - page 37
English 37 A pp endic es 6. Select the “Change” button under the “Monitor” tab. 7. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 x 12 ...
-
Optoma Technology 1080p DLP - page 38
38 A pp endic es Image is out of focus Make sure the Lens cap is removed. Adjusts the Focus Ring on the projector lens. Make sure the projection screen is between the required dis- tance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 16. The image is stretched when displaying 16:9 DVD title When you play anamorphic D ...
-
Optoma Technology 1080p DLP - page 39
English 39 A pp endic es Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section on page 41. Projec ...
-
Optoma Technology 1080p DLP - page 40
40 A pp endic es Over temperature: Replacing the lamp: Remote Control Problems If the remote control does not work Check the operating angle for the remote control is approximately ±22.5°. Make sure there are not any obstructions between the remote con- trol and the projector. Move to within 6 m (20 ft) of the projector. Make ...
-
Optoma Technology 1080p DLP - page 41
English 41 A pp endic es Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ...
-
Optoma Technology 1080p DLP - page 42
42 A pp endic es Remark : “ * ”com- pressed computer image. Compatibility Modes N ote N ote Mode Resolution V.Frequency (Hz) A Analog Digital VESA SVGA 800 x 600 60 VESA SVGA 800 x 600 72 VESA SVGA 800 x 600 75 VESA XGA 1024 x 768 60 VESA XGA 1024 x 768 70 VESA XGA 1024 x 768 75 VESA XGA 1024 x 76 ...
-
Optoma Technology 1080p DLP - page 43
English 43 A pp endic es RS232 Commands and Protocol Function List Pin no. Name I/O (From Projector Side 1 NC __ 2 RXD IN 3 TXD OUT 4 NC __ 5 GND __ 6 NC __ 7 NC __ 8 NC __ 9 NC __ RS232 Pin Assignments 3 5 1 9 6 ...
-
Optoma Technology 1080p DLP - page 44
44 A pp endic es RS232 Protocol Function List I n t e r f a c e : 9 wires RS-232C B a u d R a t e : 115200 D a t a B i t : 8 P a r i t y : none S t o p B i t s : 1 F l o w C o n t r o l : none Terminatro 1 Terminator 2 S ilence/ O SD Mod e s et/ g et V i e w e d A s F u n c t i o n D e s c r i p t i o n A C K OKOKOKOKOK <CR > <LF > -- s ...
-
Optoma Technology 1080p DLP - page 45
English 45 A pp endic es Comand Header Blan k Blan k A ddress Cod e Command Blan k Terminator 1 Header Terminator 2 S ilence/ O SD Mod e s et/ g e t V i e w e d A s F u n c t i o n D e s c r i p t i o n A C K s / g T E R M 2 T E R M 1 S I L N H E A D B A D D R B C O M H B C O M * 0 IR 035 * 0 IR <CR> -- s Brightness Default ACK * 0 IR 036 * 0 ...
-
Optoma Technology 1080p DLP - page 46
46 A pp endic es Please note that dam- age resulting from incorrect installation will invalidate the war- ranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceil- ing mount package for installation. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the pr ...
-
Optoma Technology 1080p DLP - page 47
English 47 A pp endic es Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 (English/French) Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.com Service : service@optoma.com Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-361-2582 www.optoma.ca Fax: ...
-
Optoma Technology 1080p DLP - page 48
48 A pp endic es Taiwan 231, 台北縣新店市民權路 108 號 5 樓 R.O.C. 傳真： +886-2-2218-2313 電話： +886-2-2218-2360 www.optoma.com.tw 服務處： services@optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong Tel : +852-2396-8968 Fax: +852-2370-1222 www.optoma.com ...
-
Optoma Technology 1080p DLP - page 49
English 49 A pp endic es Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a ...
-
Optoma Technology 1080p DLP - page 50
50 A pp endic es Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, includ- ing interference that may cause undesired operation. Notice: Canadian users This Class B di ...
Avez-vous une question à propos de Optoma Technology 1080p DLP?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Optoma Technology 1080p DLP, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Optoma Technology 1080p DLP il est probable qu’il a envie de partager la façon de le résoudre.