-
Image IMHS63100 - page 1
® USER’S MANUAL QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory . TO A VOID UNNECESSAR Y DELA YS, PLEASE CALL DIRECT TO OUR T OLL-FREE CUSTOMER HOT LINE. The train ...
-
Image IMHS63100 - page 2
2 IMAGE ® is a registered trademark of ICON Health & Fitness, Inc. Posting the W arning Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Image IMHS63100 - page 3
3 W ARNING: T o reduce the risk of drowning, electric shock, or serious injury , read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the hydrotherapy spa are adequately informed of all precautions. 2. Use the hydrotherapy ...
-
Image IMHS63100 - page 4
4 20. DANGER—Risk of electric shock. Keep all electrical appliances such as radios, tele- phones, televisions, and lights at least five feet away from the water . 21. A wire connector is provided on the electron- ics pack of the hydrotherapy spa to connect a minimum No. 8 A WG (8.04 mm 2 ) solid copper conductor between the spa and any metal equi ...
-
Image IMHS63100 - page 5
5 W ARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. SA VE THESE INSTRUCTIONS 35. W ARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body ma ...
-
Image IMHS63100 - page 6
6 Congratulations for selecting the new IMAGE ® RENEW 631 hydrotherapy spa. The innovative RENEW 631 allows you to enjoy all the benefits of hydrotherapy in the comfort and privacy of your home. Hydrotherapy is a proven method for soothing tired muscles after exercise or for relieving the stress of a busy life. The warm environment stimulates bloo ...
-
Image IMHS63100 - page 7
7 There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. If you set up the hydrotherapy spa inside: 1. The spa will increase the level ...
-
Image IMHS63100 - page 8
8 2. Refer to the drawing on page 6 and locate the pump access opening. Locate the drain hose inside the opening. Close the valve knob on top of the drain hose. Next, make sure that the cap is fully tightened onto the end of the drain hose. Locate the four gate valves inside the pump access opening (there are two gate valves per pump). Make sure th ...
-
Image IMHS63100 - page 9
9 5. After a qualified electrician has wired the spa to a 240 volt power source, refer to the inset drawing. Set the Filter (16) into the filter housing. Next, screw the Filter Cover (8) into the filter housing until it is fully seated. Remove the two warning decals (not shown) from the spa shell. Using a damp cloth, wipe the spa shell clean. Befor ...
-
Image IMHS63100 - page 10
10 The hydrotherapy spa is designed to seat five adults. The spa holds 295 gallons of water and offers a heat- ing system (80°F to 104°F), a filtration system, and adjustable hydrotherapy jets. Follow the guidelines below to use and maintain the spa for your long-term enjoyment. WIRING THE HYDROTHERAPY SP A The hydrotherapy spa is designed to ope ...
-
Image IMHS63100 - page 11
A. The eight adjustable push/pull jets allow you to direct their water flow and can be closed and opened with a push or a pull on their nozzles. W ater pressure to the other hydrotherapy jets can be increased by closing the adjustable push/pull jets. If no air flows through the jets when the air control is turned counterclockwise, pull the nozzles ...
-
Image IMHS63100 - page 12
12 Using the Controls Refer to the diagram above. The function of each control is explained below: Display Invert: T urns the Display 180°, allowing it to be read from the inside or the outside of the spa. Air Control 1: Determines the amount of air flowing through the hydrotherapy jets labeled A (above). If the control is turned counterclockwise, ...
-
Image IMHS63100 - page 13
13 The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa. MAINTENANCE SCHEDULE Daily • Check the water level and refill the spa to the level shown in step 5 on page 9. • Check the pH balance and sanitizer level. Adjust if necessary (see W A TER CHEMISTRY on page 14). Wee ...
-
Image IMHS63100 - page 14
14 W A TER CHEMISTRY The hydrotherapy spa comes with a starter chemical pack for maintaining the water in the spa. (See TEST- ING AND TREA TING THE W A TER on page 10.) Additional chemicals can be purchased at a pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. ...
-
Image IMHS63100 - page 15
15 T o drain the hydrotherapy spa, follow the steps below: 1. Using the console, adjust the temperature to the lowest setting. 2. Shut off the power to the spa, at the circuit breaker or GFCI. 3. Remove the pump access panel from the spa. 4. Remove the end of the drain hose from the spa. Remove the cap and attach a garden hose to the drain hose. 5. ...
-
Image IMHS63100 - page 16
16 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check to see if the GFCI breaker is tripped or was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR THE GFCI TRIPS WHILE THE SP A IS OPERA TING a. Reset the circuit breaker or the GFCI. If the cir- cuit breaker or the GFCI trips again, contact a qualified electrician for service ...
-
Image IMHS63100 - page 17
17 10. SYMPTOM: THE SP A JET UNIT CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF a. T o turn the main jets off, press the pump button once. NOTE: If the actual spa water tempera- ture is below the set temperature, or if the spa is running a filter cycle, the heater pump/motor will not shut off. 1 1. SYMPTOM: NO AIR FLOWS THROUGH THE ADJUST ABLE HYDROT ...
-
Image IMHS63100 - page 18
18 Part List—Model No. IMHS63100 R0700A Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. 1 1 Thermometer Fitting 2 2 Long Access Panel 3 1 Adjustable Whirlpool Jet 4 1 Heater Pump/Motor 5 2 Short Access Panel 6 2 Heater Pump/Motor O-ring 7 32 1/4” x 1 1/2” Machine Screw 8 1 Filter Cover 9 4 ...
-
Image IMHS63100 - page 19
19 19 35 24 29 4 35 24 8 34 15 17 18 37 1 26 30 31 14 27 28 13 20 22 35 36 11 7 2 7 5 25 25 25 16 24 35 6 32 26 26 10 17 18 17 12 9 9 33 38 38 38 3 23 24 38 13 27 28 13 20 22 35 24 38 13 38 24 36 24 35 38 38 24 21 32 32 39 40 40 Exploded Drawing—Model No. IMHS63100 R0700A ...
-
Image IMHS63100 - page 20
Part No. 165967 R0700A Printed in USA © 2000 ICON Health & Fitness, Inc. T o order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be pre- pared to give the following information when calli ...
Avez-vous une question à propos de Image IMHS63100?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Image IMHS63100, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Image IMHS63100 il est probable qu’il a envie de partager la façon de le résoudre.