Manuel d’utilisation Yamaha Digital Mixing Engine

12 pages 3.45 mb
Télécharger

Aller à la page of 12

Summary
  • Yamaha Digital Mixing Engine - page 1

    Hardware Setup Guide ...

  • Yamaha Digital Mixing Engine - page 2

    1. Available I/O Options DME32 has four "MY-Card"(Mini-Yamaha Generic Digital Audio Interface) Slots for I/O. Each card slot can handle up to 8 channels of I/O for a maximum of 32 I/O per DME32 unit, depending on the cards chosen. MY8-AT Eight ADAT Digital Inputs and Outputs on Optical Connectors The current MY-Cards available from Yamaha ...

  • Yamaha Digital Mixing Engine - page 3

    These are the current Remotable External Input/Output devices from Yamaha: AD824 Eight 24-bit Mic/Line Level Inputs on XLR, with Balanced Inserts on 1/4” TRS connectors, and +48V Phantom Power. All Functions (Gain Trim and Phantom Power On/Off) can be controlled remotely via RS-422 (up to 200 meters away). This device accepts one digital MY-Card ...

  • Yamaha Digital Mixing Engine - page 4

    2. Analog Line Level Only Here are some examples of utilizing all four card slots for maximum analog line-level card I/O, and the cards required: 4 XLR Inputs, 12 XLR Outputs: (1) MY4-AD (3) MY4-DA 8 XLR Inputs, 8 XLR Outputs : (2) MY4-AD (2) MY4-DA 12 XLR Inputs, 4 XLR Outputs : (3) MY4-AD (1) MY4-DA Of course, there are more combinations than the ...

  • Yamaha Digital Mixing Engine - page 5

    3. Digital I/O Each of the digital MY-Cards are capable of 8 channels of input and output (MY8-AE, MY8-AT, MY8- TD). Different format cards can be used together in a single DME32 unit. You can also mix analog and digital cards together in a single DME32 unit. For 8 Channels of Digital I/O: Use one digital MY8 card. For 16 Channels of Digital I/O: U ...

  • Yamaha Digital Mixing Engine - page 6

    4. Using the AD824 and DA824 The AD824 and the DA824 have MY-Card slots as well. Using digital MY-Cards, an audio connection between the DME32 and the AD824 and/or DA824 can be established. Using AES/EBU (MY8-AE Cards), distances of 200 meters can be achieved. Using ADAT optical transmission (MY8-AT cards), you can separate the units by 6 meters. 8 ...

  • Yamaha Digital Mixing Engine - page 7

    AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU DME32 AD824 DA824 AD824 DA824 Split AES/EBU Cable Split AES/EBU Cable A 16-Channel I/O sytem using AES/EBU transmission. Up to 200 meters of separation between the DME32 and the I/O components is possible. In the example above, a split AES/EBU cable is utilized to connect the DME32 to the AD824 and DA ...

  • Yamaha Digital Mixing Engine - page 8

    5. Creating Split AES Cables The MY8-AE Card is capable of 8 AES/EBU inputs and outputs via a 25-pin Female D-sub connector. In order to use this card with a DME32 and AD824/DA824 configuration, a split AES/EBU cable must be created. You must use shielded 110-ohm twisted-pair AES cable and 25-pin Male D-sub connector on each end. Up to 200 meters D ...

  • Yamaha Digital Mixing Engine - page 9

    All that is required is 8 twisted-pairs of shielded 110-ohm wire. Pin to pin ground connections are optional as long as the shield is connected to the connector hood. The twisted pairs are as follows: 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 Input 1/2 Input 3/4 Input 5/6 Input 7/8 Output 1/2 Output 3/4 Output 5/6 Output 7/8 T wisted Pairs Signal Des ...

  • Yamaha Digital Mixing Engine - page 10

    6. AD824 Connection for Remote Control The AD824 can be controlled remotely from the DME32 via RS-422. Gain Control and Phantom Power On/Off can be manipulated and recalled by the DME32. In order to do this, RS-422 Cables need to be run from the DME32 to the first AD824, and then daisy-chained to subsequent AD824 units. DME32 AD824 #1 AD824 #2 AD82 ...

  • Yamaha Digital Mixing Engine - page 11

    AD824 ID numbers are automatically set by their position in the chain. The first AD824 connected to DME32 is unit #1, and the second AD824 is unit #2, and so on. The IDs have no relation to the slot number they are plugged into. The ID numbers should be noted and will be used by the software to address them. This is the pin configuration for the RS ...

  • Yamaha Digital Mixing Engine - page 12

    AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU Split AES/EBU Cable Serial Cable Split AES/EBU Cable AD824 DME32 DA824 AD824 DA824 A 16-Channel I/O sytem using AES/EBU transmission. An RS-422 connection is also made to remotely control the AD824 functions. Up to 200 meters of separation between the DME32 and the I/O components is possible. Serial C ...

Fabricant Yamaha Catégorie Home Theater System

Les documents que nous recevons du fabricant de l'appareilYamaha Digital Mixing Engine peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Yamaha
- manuels d’utilisations Digital Mixing Engine
- fiches produit Yamaha
- dépliants
- ou étiquettes-énergie Yamaha Digital Mixing Engine
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Yamaha Digital Mixing Engine.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Yamaha Digital Mixing Engine, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Yamaha Digital Mixing Engine. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Yamaha Digital Mixing Engine.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Yamaha Digital Mixing Engine, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Yamaha Digital Mixing Engine par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Yamaha Digital Mixing Engine.

Le manuel d’utilisation complet Yamaha, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Yamaha Digital Mixing Engine - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Yamaha Digital Mixing Engine, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lYamaha Digital Mixing Engine qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Yamaha Digital Mixing Engine - qui devraient nous aider dans les premières étapes lors de l'utilisation Yamaha Digital Mixing Engine
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Yamaha Digital Mixing Engine
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Yamaha Digital Mixing Engine dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Yamaha Digital Mixing Engine?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Yamaha Digital Mixing Engine, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Yamaha Digital Mixing Engine il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)