Manuel d’utilisation IBM 31x

68 pages 1.56 mb
Télécharger

Aller à la page of 68

Summary
  • IBM 31x - page 1

    Sure POS 30 0 In sta ll a ti o n an d S e rvi c e Gu i d e for 48 1 0 / 4 9 1 0 Mo d e l 3 1x, 3 2x, W2H GA27-4309-01 1 1-9-2005  ...

  • IBM 31x - page 2

    ...

  • IBM 31x - page 3

    Sure POS 30 0 In sta ll a ti o n an d S e rvi c e Gu i d e for 48 1 0 / 4 9 1 0 Mo d e l 3 1x, 3 2x, W2H GA27-4309-01 1 1-9-2005  ...

  • IBM 31x - page 4

    Note Before using this information and the products it supports, be sure to read the safety information booklet (GA27-4004) and the general information under Appendix B, “Notices,” on page B-1. Second Edition (March 2005) This edition applies to IBM Point-of-Sale terminals, 4810 and 4910 (includes the 4810 terminal bundled with a printer , disp ...

  • IBM 31x - page 5

    Contents Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . .v About this guide . . . . . . . . . . . . . . . . . . . . . . . . vii Who should read this manual . . . . . . . . . . . . . . . . . . . . vii Related publications . . . . . . . . . . . . . . . . . . . . . . . vii Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • IBM 31x - page 6

    Clear display . . . . . . . . . . . . . . . . . . . . . . . . A-10 Display position . . . . . . . . . . . . . . . . . . . . . . . A-10 Delete to end of line . . . . . . . . . . . . . . . . . . . . . A-10 Dimming . . . . . . . . . . . . . . . . . . . . . . . . . A-1 1 Cursor mode . . . . . . . . . . . . . . . . . . . . . . . . A-1 1 Screen mode . . ...

  • IBM 31x - page 7

    Figures 1-1. Dimensions of the 4810/4910 SurePOS 300 (does not include the I/O devices for the Express models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1-2. Front view of 4810/4910 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1-3. 31x models rear view connections . . . . . . . . . . . . . . . . . . . . . . ...

  • IBM 31x - page 8

    1 1-9-2005 vi SurePOS Installation and Service ...

  • IBM 31x - page 9

    About this guide This guide provides product planning information, replacement and removal procedures, problem determination and parts listings of field-replaceable-units (FRUs) for the IBM 4810/4910 SurePOS ™ 300. The 4910-32x model is an Express solution, which includes a 4810-32H machine, a printer , display , cash drawer , and possibly other ...

  • IBM 31x - page 10

    – 4820 T ouch Drivers for SurePOS 700 Series, which includes the MicroT ouch ™ T ouchWare ™ – POSS for DOS download Accessibility Accessibility features help a user who has a physical disability , such as restricted mobility or limited vision, to use the 4810/4910 SurePOS 300 successfully . The following is a high-level list of the accessib ...

  • IBM 31x - page 11

    In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE marking per Annex IV of the WEEE Directive, as shown above, must not dispose of end of life EEE as unsorted municipal waste, but use the collectio ...

  • IBM 31x - page 12

    T ell us what you think Y our feedback is important in helping us provide accurate and high-quality information. Please take a few moments to tell us what you think about this document. Yo u can use either of these ways to provide feedback: v V isit our Web site at http://www .ibm.com/solutions/retail/store. Select Support , then Publications . Sel ...

  • IBM 31x - page 13

    Summary of changes November 2005 v Inserted the new End-of-Life disposal statement v Inserted the new T ell us what you think statements v Added supported models to front cover February 2005 Updated information on IBM SurePOS 300 to include the 4910-32x model, which is an Express solution that includes the 4810-32H, a printer , display , cash drawe ...

  • IBM 31x - page 14

    1 1-9-2005 xii SurePOS Installation and Service ...

  • IBM 31x - page 15

    Chapter 1. Introduction This chapter describes the characteristics of the IBM 4810 SurePOS 300, which includes the machine type 4910. Product summary The 4810 consists of a personal computer (PC) core with expansion slots, Electronic Industries Association (EIA) 232 connectors, an Ethernet LAN adapter , and built-in video (VGA) support. In addition ...

  • IBM 31x - page 16

    T able 1-2. Models and features (continued) Model Base-unit standard feature 4810-W2H 40-GB HDD, Microsoft ® Windows ® XP Professional preloaded 4910-32H/32E/32A 40-GB HDD Note: References in this guide to the 4810 Model 32x also apply to the 4810 Model W2H and 4910 Models 32H, 32E and 32A. Physical dimensions Figure 1-1 shows the dimensions of t ...

  • IBM 31x - page 17

    Environmental considerations T emperature and humidity requirements are as follows: v Operating: +10°C to 40°C (50° to 104°F) with 8% to 80% relative humidity v Shipping: −40°C to +60°C (−40° to 140° F), which includes condensation but not rain. v Storage: 0°C to +60°C (32° to 140° F) The 4810/4910 SurePOS 300 meets all worldwide El ...

  • IBM 31x - page 18

    This network connection LED is on when the 4810/4910 is connected to a hub or switch. This LED blinks during receive/send transmission. Rear connectors See the rear connector for your 4810/4910 model: v Go to “Rear connectors 4810 (31x models).” v Go to “Rear connectors 32x models” on page 1-6. Rear connectors 4810 (31x models) Figure 1-3 s ...

  • IBM 31x - page 19

    Port for an Ethernet LAN cable. Mouse port. Port for a PS/2 or compatible keyboard. Microphone port. Audio input port. Port for audio output, such as self-amplified speakers power Power . The voltage switch allows you to select 100-127 V or 200-240 V ac. Attention When installing a new power supply , be sure to set the correct input voltage for you ...

  • IBM 31x - page 20

    Rear connectors 32x models Figure 1-4 shows the connections available on the 4810/4910 models 32x: USB ports. SVGA display port. A Port for external serial devices, such as a scale or a scanner . This port is COM1. B, C,D Ports for second, third, and fourth external serial devices. E Port for a fifth serial device, which is 12 V powered. F Port for ...

  • IBM 31x - page 21

    Port for audio output, such as self-amplified speakers power Power . The voltage switch allows you to select 100-127 V or 200-240 V ac. Attention When installing a new power supply , be sure to set the correct input voltage for your area or you will damage the power supply . See Figure 1-4 on page 1-6 to locate the voltage selection switch. Product ...

  • IBM 31x - page 22

    Product introduction 1 1-9-2005 1-8 SurePOS Installation and Service ...

  • IBM 31x - page 23

    Chapter 2. Disassembling the 4810/4910 SurePOS 300 This section describes how to disassemble the 4810/4910 SurePOS 300. 1. Unplug the power cord. 2. Remove the cover from the unit. 3. Remove the hard drive ( A in Figure 2-2 on page 2-2) or compact flash ( B ): Note: The unit can accommodate either the hard disk drive or the compact flas ...

  • IBM 31x - page 24

    b. Using Figure 2-2, follow the directions for either an HDD or flash memory . v Press to release the tabs ( J ) on each side of the hard drive ( K ) and slide it out of the bracket ( I ). v To remove the compact flash: 1) Disconnect the cables from the compact flash 2) Remove the screws holding the assembly . Slide the compact fl ...

  • IBM 31x - page 25

    a. Unplug the connector and remove the screws that hold the power supply . b. Lift the power supply from the unit. Attention When installing a new power supply , be sure to set the correct input voltage for your area or the power supply will be damaged. See Figure 1-3 on page 1-4 to locate the voltage selection switch. 8. Remove the screws holding ...

  • IBM 31x - page 26

    1 1-9-2005 2-4 SurePOS Installation and Service ...

  • IBM 31x - page 27

    Chapter 3. Problem determination Note: Refer to IBM Safety Information - Read This First , GA27-4004, before beginning the procedures in this chapter . Both software errors or hardware failures can cause problems with the 4810/4910 SurePOS 300. This chapter contains troubleshooting information to help you determine the cause of a problem and how to ...

  • IBM 31x - page 28

    Note: To troubleshoot problems with the 4610 SureMark Printer , please refer to the SureMark Printers Hardware Service Guide , GY27-0355. For other I/O devices bundled with the 4910, please refer to each device’s respective service guide. Problem determination 1 1-9-2005 3-2 SurePOS Installation and Service ...

  • IBM 31x - page 29

    Chapter 4. Parts catalog Assembly 1: Field-replaceable units . . . . . . . . . . . . . . . . . 4-2 This chapter provides parts information available for the Model 31x and 32x system units. See the IBM Store Systems: Parts Catalog , for parts information about peripheral devices. 1 1-9-2005 © Copyright IBM Corp. 2002, 2004 4-1 ...

  • IBM 31x - page 30

    Assembly 1: Field-replaceable units 2 5 3 10 8 9 1 4 6 7 11 Parts catalog 1 1-9-2005 4-2 SurePOS Installation and Service ...

  • IBM 31x - page 31

    Asm– Index Part Number Units Description 1–1 45P621 1 1 LED panel –2 03R5908 1 System board (31x) –2 03R5973 1 System board (32x) –3 16K9262 1 128-MB DIMM – 45P6236 1 256-MB DIMM – 03R5924 1 512-MB DIMM –4 45P6205 1 Compact Flash mount –5 45P6203 1 64-MB Compact Flash – 45P6235 1 128-MB Compact Flash – 45P6209 1 Riser card (31 ...

  • IBM 31x - page 32

    1 1-9-2005 4-4 SurePOS Installation and Service ...

  • IBM 31x - page 33

    Appendix A. Input/output device commands This section lists the commands and their usage. Character display (VFD) commands The integrated customer display and distributed customer display use the same command sets. This section describes the following character display commands: v Emulation mode select v Character set select v User character defini ...

  • IBM 31x - page 34

    Purpose: Selects the specified character set. 00 Modified IBM code page 437 (U.S./European, power-on default) 01 Modified IBM code page 897 (Katakana) 02 Modified IBM code page 858 (Multilingual International) 03 Modified IBM code page 852 (Central Europe) 04 Modified IBM code page 855 (Cyrillic) 05 Modified IBM code page 857 (T urkey) 06 Modified ...

  • IBM 31x - page 35

    T able A-1. User character definition: Logic Controls Emulation Mode Byte # Bit 0 1 2 3 4 5 6 7 1 P8 P7 P6 P5 P4 P3 P2 P1 2 P16 P15 P14 P13 P12 P1 1 P10 P9 3 P24 P23 P22 P21 P20 P19 P18 P17 4 P32 P31 P30 P29 P28 P27 P26 P25 5 - - - - - P35 P34 P33 * These character definitions are maintained for application compatibility with displays with 5x8 char ...

  • IBM 31x - page 36

    T able A-3. User character definition: IBM emulation mode Byte # Bit 0 1 2 3 4 5 6 7 1 - - - P1 P2 P3 P4 P5 2 - - - P6 P7 P8 P9 P10 3 - - - P1 1 P12 P13 P14 P15 4 - - - P16 P17 P18 P19 P20 5 - - - P21 P22 P23 P24 P25 6 - - - P26 P27 P28 P29 P30 7 - - - P31 P32 P33 P34 P35 8* - - - - - - - - * These user character definitions are maintained for appl ...

  • IBM 31x - page 37

    carriage return, or display position command is written to the top line. The test and reset commands stop the scrolling message regardless of the display position. Backspace (08) <BS> 08 Purpose: Decrements the cursor position by one and clears any character displayed in that position. If the write position is at the lower left, the position ...

  • IBM 31x - page 38

    line is cleared, and the cursor position is unchanged. This command always stops the scrolling alphanumeric message. Carriage return (0D) <CR> 0D Purpose: Causes the cursor to move to the leftmost position of the current line. This command stops the scrolling alphanumeric message if the cursor position is on the top line when this command is ...

  • IBM 31x - page 39

    V ertical-scroll display control mode (12) <DC2> 12 Purpose: Sets vertical-scroll display control mode (DC2) and permits data to be written to either line. When the display position is at the last position of the top line, the cursor moves to the first position of the bottom line. When either valid character data or a Horizontal Ta b command ...

  • IBM 31x - page 40

    Null VFD Commands (06), (1B, 06), (07), (1B), 07) Purpose: These are null commands for both integrated and distributed display modules. They will have no effect on the operation of the display . Input/output device commands 1 1-9-2005 A-8 SurePOS Installation and Service ...

  • IBM 31x - page 41

    AP A commands This section describes the following AP A VFD commands: v Backspace without deleting v Line feed v Carriage return v T est v Clear display v Display position v Delete to end of line v Dimming v Cursor mode v Screen mode v Horizontal scroll v Display mode v User definable font v Graphic display mode v Double-size letter in horizontal v ...

  • IBM 31x - page 42

    Carriage return 0D Purpose: The write-in position is shifted to the most significant digit of the same row . If the write-in position is on the most significant digit, the command is ignored. T est 0F Purpose: Causes the 40 characters in the IBM code page 437 character (X'20'-X'47') set to be displayed one time. In addition, at ...

  • IBM 31x - page 43

    Purpose: The displayed characters from the write-in position to the end position on the same row are erased. The write-in position is not shifted. Dimming 1B 5C 3F 4C 44 Ps Purpose: Luminance can be adjusted into six levels by using this command. The data byte following the command sequence (represented by Ps in the preceding command format), chang ...

  • IBM 31x - page 44

    Ps Mode 6 (X'36') 5x7 dots, 4 rows (default) 7 (X'37') 5x7 dots, 5 rows 8 (X'38') 16x16 dots, 2 rows Horizontal scroll 1B 5C 3F 4C 48 Pm 3B Pl 3B Pt 3B Pn 3B Pd...Pd Purpose: This command initiates horizontal scrolling. The control bytes embedded in the command sequence (represented by Pm, Pl, Pt, and Pn in the precedi ...

  • IBM 31x - page 45

    Ps Mode 0 (X'30') Reset display mode. Characters written after this command are reset to normal display mode. 5 (X'35)' Blinking mode. Characters written after this command blink ON and OFF every 0.3 seconds. 7 (X'37') Reverse mode. Characters written after this command are reversed. User-definable font set 1B 5C 3F 4C ...

  • IBM 31x - page 46

    available.) X'B0A0'--X'B0FF', X'B1A0'--X'C8FF' (Positions X'B100'--X'B19F' are not available.) X'CAA0'--X'CAFF', X'CBA0'--X'FDFF' (Positions X'CB00'--X'CB9F' are not available.) Simplified Chinese GB2312-80 (Font selection X' ...

  • IBM 31x - page 47

    The format of the Horizontal Scroll Release command is as follows: 1B 5C 3F 4C 4D 45 Purpose: This command resets horizontal scroll mode. The format of the Horizontal Scroll Display Mode Set command is as follows: 1B 5C 3F 4C 4D Pm 3B Pl 3B Pt 3B Pn 3B Pd...Pd Purpose: This command sets horizontal scrolling options. The control bytes embedded in th ...

  • IBM 31x - page 48

    v When message data is changed, you must reissue this command. While scrolling, the User Definable Font Set command is not available. v Space data is written in the other rows except those selected with the Pl code. Font selection 1B 53 Pn Purpose: Selects the language font to use The command stream is as follows: Pn 30: English - IBM code page 437 ...

  • IBM 31x - page 49

    Appendix B. Notices References in this publication to IBM products, programs, and services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not that only IBM’s product, program, or service may be used. Any functionally equivalent product, program, ...

  • IBM 31x - page 50

    Electronic emission notices Federal communications commission (FCC) statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial en ...

  • IBM 31x - page 51

    Dieses Gerät ist berechtigt. in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. V erantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart. Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2: Das Gerät erfüllt die Schutzanf ...

  • IBM 31x - page 52

    Korean Communications Statement Please note that this device has been approved for business purposes with regard to electromagnetic interference. If you find this is not suitable for your use, you may exchange it for a non-business purpose one. T aiwanese class A warning statement T aiwanese battery recycling statement W aste batteries, please recy ...

  • IBM 31x - page 53

    Chinese Class A warning statement Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Electrostatic discharge (ESD) Attention: ESD damage can occur when there is a difference in charge between the part, the product, and the servic ...

  • IBM 31x - page 54

    T rademarks The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both: IBM SurePoint IBM (logo) SurePOS PS/2 Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company , product, or service names may b ...

  • IBM 31x - page 55

    Appendix C. Safety information Danger: Before you begin to install this product, read the safety information in IBM Safety Information — Read This First , GA27-4004. This booklet describes safe procedures for cabling and plugging in electrical equipment. Gevaar: V oordat u begint met de installatie van dit produkt, moet u eerst de veiligheidsinst ...

  • IBM 31x - page 56

    Perigo: Antes de começar a instalar este produto, leia as informações de segurança contidas em Informações Sobre Seguranaça—Leia Isto Primeiro, GA27-4004. Esse folheto descreve procedimentos de segurança para a instalação de cabos e conexões em equipamentos elétricos. Fare! Før du installerer dette produkt, skal du læse sikkerhedsfo ...

  • IBM 31x - page 57

    V AARA Ennen kuin aloitat tämän tuotteen asennuksen, lue julkaisussa T urvaohjeet—Luetämä ensin , GA27-4004, olevat turvaohjeet. Tässä kirjasessa on ohjeet siitä, miten sähkölaitteet kaapeloidaan ja kytketään turvallisesti. Danger Avant d’installer le présent produit, consultez le livret Informations pour la sécurité–Lisez-moi d ...

  • IBM 31x - page 58

    Pericolo prima di iniziare l’installazione di questo prodotto, leggere le informazioni relative alla sicurezza riportate nell’opuscolo Informazioni di sicurezza—Prime informazioni da leggere in cui sono descritte le procedure per il cablaggio ed il collegamento di apparecchiature elettriche. Fare Før du begynner å installere dette produktet ...

  • IBM 31x - page 59

    V arning—livsfara Innan du börjar installera den här produkten bör du läsa säkerhetsinformationen i dikumentet Säkerhetsföreskrifter—Läs detta först, GA27-4004. Där beskrivs hur du på ett säkert sätt ansluter elektrisk utrustning. 1 1-9-2005 Appendix C. Safety information C-5 ...

  • IBM 31x - page 60

    IBM IBM GA27-4004 GA27-4004 1 1-9-2005 C-6 SurePOS Installation and Service ...

  • IBM 31x - page 61

    GA27-4004 GA27-4004 GA27-4004 GA27-4004 GA27-4004 GA27-4004 IBM 1 1-9-2005 Appendix C. Safety information C-7 ...

  • IBM 31x - page 62

    1 1-9-2005 C-8 SurePOS Installation and Service ...

  • IBM 31x - page 63

    Index Numerics 4810 SurePOS 300 features 1-1 summary of models and features 1-1 4910 SurePOS 300 disassembling procedures 2-1 A about this guide vii accessibility viii adapters 1-1 alphanumeric message scroll A-4 attention notice, voltage selection switch 2-3 audio input 1-5, 1-6 output 1-5, 1-7 B brightness control command A-4 C card slots 1-1 cat ...

  • IBM 31x - page 64

    L LAN 1-1 LED assembly problems 3-1 removing 2-2 LED indicators, front view and 1-3 M manual, who should read this vii Memory 1-1 message, POST error 3-1 microphone 1-5, 1-6 models 1-1 mouse port 1-5, 1-6 N notices edition ii ESD B-5 safety information C-1 trademarks B-6 null commands A-16 null VFD commands A-8 O output, audio 1-5, 1-7 P panel-moun ...

  • IBM 31x - page 65

    Readers’ Comments — W e’d Like to Hear from Yo u SurePOS 300 Installation and Service Guide for 4810/4910 Model 31x, 32x, W2H Publication No. GA27-4309-01 Overall, how satisfied are you with the information in this book? V ery Satisfied Satisfied Neutral Dissatisfied V ery Dissatisfied Overall satisfaction hhhhh How satisfied are you that the ...

  • IBM 31x - page 66

    Readers’ Comments — We’d Like to Hear from Yo u GA27-4309-01 GA27-4309-01  Cut or Fold Along Line Cut or Fold Along Line Fold and T ape Please do not staple Fold and T ape Fold and T ape Please do not staple Fold and T ape NO POST AGE NECESSARY IF MAILED IN THE UNITED ST A TES BUSINESS REPL Y MAIL FIRST -CLASS MAIL PERMIT NO. 40 A ...

  • IBM 31x - page 67

    ...

  • IBM 31x - page 68

     Part Number: 03R5994 1 1-9-2005 Printed in USA GA27-4309-01 (1P) P/N: 03R5994 ...

Fabricant IBM Catégorie Computer Drive

Les documents que nous recevons du fabricant de l'appareilIBM 31x peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques IBM
- manuels d’utilisations 31x
- fiches produit IBM
- dépliants
- ou étiquettes-énergie IBM 31x
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation IBM 31x.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation IBM 31x, manuels d’entretien, brefs manuels ou manuels de l’utilisateur IBM 31x. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit IBM 31x.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil IBM 31x, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser IBM 31x par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs IBM 31x.

Le manuel d’utilisation complet IBM, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel IBM 31x - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières IBM 31x, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lIBM 31x qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil IBM 31x - qui devraient nous aider dans les premières étapes lors de l'utilisation IBM 31x
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de IBM 31x
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service IBM 31x dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de IBM 31x?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec IBM 31x, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec IBM 31x il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)