-
AEG 54710 - page 1
FAVORIT 547 1 0 Dishwasher Oper ating instructions 152976 12/1en 27-05-2002 11:44 Pagina 1 ...
-
AEG 54710 - page 2
2 Dear customer! Please read these user instructions car efully . Above all please observe the safety instructions on the first few pages of these user instructions! Please keep these user instructions for later refer ence. P ass them on to any subsequent owner of the appliance. The warning triangle and/or specific words (W arning!, Caution!, Impor ...
-
AEG 54710 - page 3
3 Contents Safety instructions 4 Disposing of packaging and old machine 6 Disposing of the packaging 6 Disposing of your old machine 6 Economical and ecological dishwashing 7 Description of the appliance 8 The inside of the appliance 8 Control panel 9 Before using your dishwasher for the fir st time 1 0 Setting the water hardness r ange 1 0 Filling ...
-
AEG 54710 - page 4
4 Safety instructions The safety of AEG electrical appliances conforms to accepted rules of technology and the Appliance Safety Act. We as manufactur er s, however , see ourselves as being obliged to familiarise you with the following safety instructions. Using your dishwasher for its intended purpose ● Only use your dishwasher for machine washin ...
-
AEG 54710 - page 5
5 Y our dishwasher in day-to-day use ● Never operate your dishwasher if the electrical supply lead, supply or dr ainhose, control panel, worktop or plinth ar e damaged. ● If there is a fault, fir st turn the water tap off. Then switch off your machine and pull the plug out of the socket. If there is a fixed connection, switch off or unscrew the ...
-
AEG 54710 - page 6
Marking of plastic parts for graded r ecycling: all plastic parts in your machine ar e marked with internationally standardised abbr eviations (e.g. <PS> for polystyr ene). When your machine is disposed of, this enables plastic waste to be sorted into individual types for environmentally conscious r ecycling. Take your decommissioned machine ...
-
AEG 54710 - page 7
7 Economical and ecological dishwashing ● Only connect the dishwasher to the hot water supply if your hot water is not electrically heated. ● Ensure that the water softener is corr ectly adjusted. ● Do not pre-rinse under running water . ● Select the wash progr amme to suit the natur e and degree of the soiling on the dishes. ● Do not use ...
-
AEG 54710 - page 8
8 Description of the appliance IN138 The inside of the appliance 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Detergent dispenser 6. Control panel 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10 . Upper basket 11 . Worktop 152976 12/1en 27-05-2002 11:45 Pagina 8 ...
-
AEG 54710 - page 9
9 Contr ol panel 1. Pr ogramme selection push buttons 2. Delay start push button This option allows the start of the progr amme to be delayed by 3, 6 or 9 hour s. 3. Indicator lights Phase indicator lights Washing : illuminates when the washing phase is running Drying : illuminates when the drying phase is running End of progr amme : illuminates wh ...
-
AEG 54710 - page 10
10 Befor e using your dishwasher for the first time 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener . 4. P our 1 litr e of water inside the salt container and then fill with salt. 5. Fill the rinse-aid dispenser . Setting the ...
-
AEG 54710 - page 11
11 T o select a different level be sur e that the dishwasher is off and then pr oceed as follows: 1. Press INTENSIV 7 0° and NORMAL 65° programme push buttons simultaneously . 2. While keeping the progr amme push buttons INTENSIV 7 0° and NORMAL 65° pressed, switch on the dishwasher by pr essing the On/Off push button. The On/Off indicator ligh ...
-
AEG 54710 - page 12
12 T o fill: 1. To fill with salt, unscr ew the cap of the salt container . 2. Pour 1 litr e of water inside the container (this is necessary only before filling with salt for the first time). 3. Using the funnel provided, pour in the salt until the container is full. Do not worry if water overflows from the unit when filling with salt, this is qui ...
-
AEG 54710 - page 13
13 When this has been done, all that is requir ed is to periodically top up the container with salt. Y ou ar e reminded of this by the salt container indicator light on the control panel which comes on when the salt has run out. The salt indicator light on the control panel can r emain illuminated for 2-6 hours after the salt has been replenished, ...
-
AEG 54710 - page 14
14 T o deactivate the rinse aid indicator light be sure that the dishwasher is off and then pr oceed as follows: 1. Press INTENSIV 7 0° and NORMAL 65° programme push buttons simultaneously . 2. While keeping the progr amme push buttons INTENSIV 7 0° and NORMAL 65° pressed, switch on the dishwasher by pr essing the On/Off push button. The On/Off ...
-
AEG 54710 - page 15
15 Adjusting the dose According to the finish and drying r esults obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if ther e ar e drops of water or lime spots on the dishes after washing. Reduce it if there ar e sticky whitish str eaks on the dis ...
-
AEG 54710 - page 16
16 Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher . For washing in the dishwasher the following cutlery/dishes are not suitable: ● Cutlery with wooden, horn, china or mother of pearl handles. ● Plastic items that are not heat r esistant. ● Older cutlery with cement ...
-
AEG 54710 - page 17
17 The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arr anged around the edge of the basket, ensuring that the upper spray arm can turn fr eely . The two rear r ows of pr ongs on the lower basket can be easily lowered to allow you to load pots, pans and ...
-
AEG 54710 - page 18
18 Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles pr otrude fr om the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing downwar ds. Mix spoons with other cutlery to prevent the fr om sticking together . Silver cutlery tends to go black if mixed ...
-
AEG 54710 - page 19
19 The upper basket T he upper basket is designed for plates (dessert plates, saucers, dinner plates up to 24 cm in diameter), salad bowls, cups and glasses. Glasses with long stems can be placed upside- down in the cup-racks The cup-rack on the left folds upwar ds to incr ease your loading flexibility . Arrange items on and underneath the fold-dow ...
-
AEG 54710 - page 20
20 Use of deter gent Attention! Only use detergents specifically designed for use in dishwashers . If using powder detergents pr oceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent accor ding to the recommended quantity given in the "Washing pr ogr ammes" chart. As all detergents ar e not the same, p ...
-
AEG 54710 - page 21
21 Compact deter gents with enzymes In these compact powders the envir onmentally unfriendly components have been replaced by natur al enzymes and other mor e biodegradable substances. The enzymes deploy their full dirt dissolving power at a temperatur e as low as 50°C. By choosing the "50°C" progr ammes you can ther efore achieve the s ...
-
AEG 54710 - page 22
22 W ashing pr ogr ammes Progr amme T ype of soil and type of load Light soil. Crockery and cutlery Normal soil. Crockery and cutlery Normal soil. Crockery and cutlery Heavy soil. Crockery , cutlery , pots and pans Required push buttons Recommended quantity of detergent On/Off + INTENSIV 7 0° On/Off + NORMAL 65° On/Off + NORMAL 50° On/Off + QUIC ...
-
AEG 54710 - page 23
23 Progr amme duration in minutes Energy consumption in kWh Water consumption in litres Cycle description Approximate values * 94 ÷ 1 04 1,89 18 79 ÷ 89 1,15 14 43 ÷ 53 0,79 1 1 79 ÷ 89 0,99 14 Hot prewash Main wash up to 7 0°C 2 cold rinses 1 hot rinse Active drying Warm pr ewash Main wash up to 65°C 1 cold rinse 1 hot rinse Active drying Co ...
-
AEG 54710 - page 24
24 Oper ating instructions 1. Check the filters Ensure they ar e clean and pr operly positioned (see "Maintenance and cleaning"). 2. Pr ess the On/off push button The On/Off indicator light will come on. 3. Check that ther e is rinse aid and salt The corresponding indicator lights will illuminate if r efilling is necessary . 4. Load the d ...
-
AEG 54710 - page 25
25 8b . Setting and starting the pr ogramme with delay start The setting of the delay start occurs befor e selecting the pr ogramme. Press the delay start push button and selected the desir ed time (3, 6 or 9 hours) until the indicator light corr esponding to the chosen hour s flashes. Press the push button corr esponding to the wanted pr ogramme: ...
-
AEG 54710 - page 26
26 Caution! In general it is not advisable to open the door while the machine is working; if the door is opened however , a safety device ensures that the machine stops. Caution! Opening the door could let very hot steam escape: you risk being scalded! Open the door with great car e. Do not open the door during the hot phase: this may cause hot wat ...
-
AEG 54710 - page 27
27 Maintenance and cleaning Internal and external cleaning If necessary , clean the controls only with a soft cloth and pur e warm water . The spray arms do not need cleaning. Occasionally check the internal containers, door seal and water inlet for soiling, clean if necessary . We r ecommend every 3 months to run a 65°C wash pr ogramme without di ...
-
AEG 54710 - page 28
28 6. Remove the flat filter (4) from the base of the washing compartment and clean both faces thoroughly . 7. Put the flat filter back in the base of the washing compartment. 8. Place the coarse/fine filter in the microfilter and pr ess together . 9. Put the filter combination in place and lock by turning the handle clockwise to the stop. During t ...
-
AEG 54710 - page 29
29 ...."washing" and "drying" phase indicator lights are flashing ....one or more phase indicator lights are flashing Protection against flooding is active. General Close the water tap and contact the Service Force Centre. Switch off the dishwasher . Switch it back on and start the progr amme. if the alarm reappears , call the S ...
-
AEG 54710 - page 30
30 ....the door is difficult to close The dishwasher is not level or not properly built-in. Refer to Installation instructions. Malfunction ....the progr amme does not start ....the machine is noisy The plug is not properly inserted in the power socket. There is no curr ent at the socket. The door is not properly closed. Insert the plug. Close the ...
-
AEG 54710 - page 31
31 Customer service In the section "What to do, if...", we have listed the most important faults which you can rectify your self. Should you still wish to call our Service Centr e for any of the specified faults or because the appliance is being wrongly oper ated, the service engineer's visit cannot be made free of char ge even durin ...
-
AEG 54710 - page 32
32 T echnical specifications This appliance complies with the following E.E.C. Directives: - 73/23/CEE of 19/02/73 (Low V oltage Dir ective) and subsequent modifications; - 89/336/CEE of 03/05/89 (Electromagnetic Compatibility Dir ective) and subsequent modifications. Dimensions Electrical connection Motor rating during wash Power of heating elemen ...
-
AEG 54710 - page 33
33 Hints for test centr es Test standar d Load Rinse aid selector Detergent dosage Reference pr ogramme EN 50242 position 4 - 20 g in the dispenser - 5 g on the dispenser lid 9 standard place settings - Eco 50° Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser . Arra ...
-
AEG 54710 - page 34
34 Fitting under a counter (kitchen worktop or sink) By removing the machine’ s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the r ecess correspond to those shown in the pictur e. Proceed as follows: - Remove the machine’s worktop by unscr ewing the two front r etaining scr ews, ...
-
AEG 54710 - page 35
35 Connection instructions Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work requir ed to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position th ...
-
AEG 54710 - page 36
36 W ater outlet connection The end of the drain hose can be connected as follows: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. 3. To a wall outlet pr ovided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a he ...
-
AEG 54710 - page 37
37 Safety standards r equir e the appliance to be earthed. The Manufacturer accepts no liability for failur e to observe the above safety precautions . Pr otection against flooding The machine is fitted with a device in the bottom of the machine to protect against flooding. The device will operate if ther e ar e any water leaks in the machine. In c ...
-
AEG 54710 - page 38
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Copyright by AEG Subject to change without notice 152976 12/1 GB From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Ele ...
Avez-vous une question à propos de AEG 54710?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec AEG 54710, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec AEG 54710 il est probable qu’il a envie de partager la façon de le résoudre.