Français dropdown-ico

Manuel d’utilisation NETGEAR N150

41 pages 0.63 mb
Télécharger

Aller à la page of 41

Summary
  • NETGEAR N150 - page 1

    September 2010 208-10724-01 v1.0 NETGEAR , Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA N150 Wireless Router WNR1000v3 Setup Manual ...

  • NETGEAR N150 - page 2

    ii ©2010 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and the NETGEAR logo are trademarks of NETGEAR. Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Wi-Fi Protected Setup is a trademark of the Wi-Fi Alliance. Other brand and product names are registered trademarks or trademarks of their resp ...

  • NETGEAR N150 - page 3

    iii Contents N150 Wireless Router Setup Manual Getting to Know Your Wireless Router ................................................................................ 1 Unpacking Your New Router ............................................................................................. 1 Hardware Features ........................................... ...

  • NETGEAR N150 - page 4

    iv Obtaining an Internet IP Address .................................................................................... 28 Troubleshooting PPPoE ............................................................................................ 29 Troubleshooting Internet Browsing .......................................................................... ...

  • NETGEAR N150 - page 5

    Getting to Know Your Wireless Router 1 Getting to Know Your Wireless Router Congratulations on your purchase of a NETGEAR® high-speed wireless router, the N150 Wireless Router Model WNR1000v3. Before you begin installing your router, check the package contents (see “Unpacking Your New Router” on page 1 ). Become familiar with the front and bac ...

  • NETGEAR N150 - page 6

    Getting to Know Your Wireless Router 2 To prepare your router for installation: 1. Carefully peel off any protective film covering the sides of your router. 2. Place your router in a suitable area for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers). Hardware Features Before you install and conne ...

  • NETGEAR N150 - page 7

    Getting to Know Your Wireless Router 3 You can use the status lights to verify various conditions. Table 1. Status Light Descriptions Label Activity Description 1. Power Solid Amber Solid Green Blinking Amber Blinking Green Off The router is performing the power-on self-test diagnostic. The power is on and the router is ready. A software update is ...

  • NETGEAR N150 - page 8

    Getting to Know Your Wireless Router 4 Back Panel The router back panel, shown in Figure 2 , contains port connections. Viewed from left to right, the rear panel contains the following elements: 1. Restore factory settings button. Press for approximately 5 seconds to reset the router to the factory default settings. 2. Four Local Area Network (LAN) ...

  • NETGEAR N150 - page 9

    Getting to Know Your Wireless Router 5 1. WPS button – Turns Push ‘N’ Connect (WPS) on and off. When Push ‘N’ Connect is active and ready to add a wireless client through WPS, the Push ‘N’ Connect LED on the front of the wireless router is blinking. See “Push 'N' Connect” on page 3 . 2. Wireless On/Off button – Turns t ...

  • NETGEAR N150 - page 10

    Getting to Know Your Wireless Router 6 • Accessible to an AC power outlet and near Ethernet cables for wired computers. • In an elevated location such as a high shelf, keeping the number of walls and ceilings between the wireless router and your other devices to a minimum. • Away from electrical devices which are potential sources of interfer ...

  • NETGEAR N150 - page 11

    Getting to Know Your Wireless Router 7 This is the easiest option. The wizard guides you through the setup process. It automates many of the steps and verifies that the steps have been successfully completed. • Manual Setup : If you cannot or prefer not to use the Smart Wizard Installation Assistant, see “Manually Installing Your Router” on p ...

  • NETGEAR N150 - page 12

    Installing Your Router Using the Smart Wizard 8 Installing Your Router Using the Smart Wizard The Smart Wizard setup procedure should take about 15 minutes to complete. Before using the Smart Wizard, ensure that: • You are using a PC with either a Mac operating system or a Windows operating system (Windows 7, Windows Vista, Windows 2000, or Windo ...

  • NETGEAR N150 - page 13

    Installing Your Router Using the Smart Wizard 9 2. When the Smart Wizard prompts you about updates, click Yes to check for updates for your router, or No , to update later (for more information, see “Setting Up Your Router for Internet Access” on page 16 , or the online User Manual ). 3. Follow the remaining instructions and prompts. The Smart ...

  • NETGEAR N150 - page 14

    Installing Your Router Using the Smart Wizard 10 Accessing Your Router After Installation The Smart Wizard only appears when you first install the router or when the router is in its factory default state (for example, if you have reset the router to its default factory settings). If you want to change the settings after installing and configuring ...

  • NETGEAR N150 - page 15

    Manually Installing Your Router 11 Manually Installing Your Router Before installing and connecting your router manually, review the list below and make sure that you have all of the necessary information. • Internet service connection through an Internet Service Provider (ISP). • The configuration information your ISP gave you. Depending on ho ...

  • NETGEAR N150 - page 16

    Manually Installing Your Router 12 Connecting Your Wireless Router Before you install your wireless router, make sure that the Internet Protocol (TCP/IP) Property settings on your computer are set to “automatically obtain an IP address” using DHCP and “Obtain DNS server address automatically.” You can check these settings by looking at the ...

  • NETGEAR N150 - page 17

    Manually Installing Your Router 13 5. Locate the Ethernet cable that came with your NETGEAR product. Securely insert one end of the Ethernet cable into your modem ( C ) and the other end into the Internet port of the wireless router ( D ). (The cable and the Internet port label are color coded.) 6. Locate the cable ( A ) that is still attached to y ...

  • NETGEAR N150 - page 18

    Manually Installing Your Router 14 7. Connect any additional wired PC to your router by inserting an Ethernet cable from one of these computers into one of the three remaining LAN ports. 8. Review that your network is now set up (as shown in Figure 9 ); you are ready to start your network. 9. Start your network in the correct sequence, as described ...

  • NETGEAR N150 - page 19

    Manually Installing Your Router 15 3. Turn on your computer. It will take several minutes for your router to establish a connection with your computer and your Internet provider. Verifying Your Connection Verify that your router is connected correctly by checking the wireless router status lights (as illustrated in Figure 11 ). For DSL customers, i ...

  • NETGEAR N150 - page 20

    Manually Installing Your Router 16 Setting Up Your Router for Internet Access When configuring your wireless router manually, you must log in to your wireless router to set it up initially and to make any changes to your wireless router’s settings later. To access the router: 1. Type http://www.routerlogin.net in the address field of your browser ...

  • NETGEAR N150 - page 21

    Manually Installing Your Router 17 2. When prompted, enter admin for the router user name and password for the router password, both in lowercase letters. (For security reasons, the router has its own user name and password.) The Firmware Upgrade Assistant screen will display. 3. Click Yes to check for new firmware (recommended) . The router will a ...

  • NETGEAR N150 - page 22

    Manually Installing Your Router 18 5. From the menu options in the left navigation pane, click Setup Wizard . The Setup Wizard screen will display. 6. Select one of the following options: • Select Yes to allow the Setup Wizard to detect your Internet connection. When prompted, click Next . The wizard will assist you with configuring your wireless ...

  • NETGEAR N150 - page 23

    Manually Installing Your Router 19 If you do not connect successfully: • Review your settings and make sure that you have selected the correct options and typed everything correctly. • Contact your ISP to verify that you have the correct configuration information. • Read “Troubleshooting” on page 24 . If problems persist, register your NE ...

  • NETGEAR N150 - page 24

    Configuring Your Wireless Network 20 Configuring Your Wireless Network After installing your Router, you must log into the Router to complete your wireless setup. The wireless network settings of the Router must match the wireless network settings of any wireless devices that connect wirelessly to the Router (such as wireless adapter cards and wire ...

  • NETGEAR N150 - page 25

    Configuring Your Wireless Network 21 Setting Your SSID and Wireless Security To specify the wireless settings, you must know the following: • SSID. The default SSID for the router is NETGEAR. • The wireless mode (802.11g/b, or 802.11n) that each wireless adapter supports. • Wireless security option. NETGEAR strongly recommends that you use wi ...

  • NETGEAR N150 - page 26

    Configuring Your Wireless Network 22 2. Check that the wireless adapter on each computer can support the mode and security option that you selected. (If you have a question, see the online User Manual or review the settings you selected in “Setting Your SSID and Wireless Security” on page 21 ). 3. Check that the security settings on each wirele ...

  • NETGEAR N150 - page 27

    Configuring Your Wireless Network 23 You can use WPS in one of two ways: • If the router’s SSID and security option have already been set (see “Setting Your SSID and Wireless Security” on page 21 ), a wireless device can be connected to your wireless network quickly and simply by using WPS. In this case, the existing wireless settings are t ...

  • NETGEAR N150 - page 28

    Configuring Your Wireless Network 24 For more information on setting up your wireless network and configuring your wireless security settings, see the User Manual . A link to the online User Manual is on your Resource CD. ...

  • NETGEAR N150 - page 29

    Troubleshooting 24 Troubleshooting If you have difficulties accessing the Internet, use the Basic Setup Checklist to make sure that you have connected and set up your router correctly. If your basic setup is correct, then look for your problem in one of the subsequent sections. Basic Setup Checklist The following items are the most common errors ma ...

  • NETGEAR N150 - page 30

    Troubleshooting 25 – Some cable modem services require you to use the MAC address of the computer registered on the account. If so, in the Router MAC Address section of the Basic Settings menu, select “Use this Computer’s MAC Address.” Click Apply to save your settings. Restart the network in the correct sequence. • Check the router statu ...

  • NETGEAR N150 - page 31

    Troubleshooting 26 To restore your firmware: a. Make sure your PC is connected to your router and the router is powered on. b. Insert the Resource CD that came with your router into your PC. – The CD will automatically start and detect the language you are using on your PC. Select a different language option, if you prefer. – If the CD does not ...

  • NETGEAR N150 - page 32

    Troubleshooting 27 c. Be sure you are using Ethernet cables like the cable that was supplied with the wireless router. See “Connecting Your Wireless Router” on page 12 for instructions. For more information on WPS functionality and advanced features, see the online User Manual. Troubleshooting Login Problems If you are unable to log in to the w ...

  • NETGEAR N150 - page 33

    Troubleshooting 28 • If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your network, the router cannot perform many gateway services, for example, converting ADSL or Cable data into Ethernet networking information. NETGEAR does not support such a configuration. Checking the Internet Service Connection If ...

  • NETGEAR N150 - page 34

    Troubleshooting 29 • Your service provider might require a login. Ask your service provider whether they require a PPP over Ethernet (PPPoE) login. • You might have incorrectly set the service name, user name or password. See “Troubleshooting PPPoE” on page 29 . • Your service provider might check for your computer's host name. Assig ...

  • NETGEAR N150 - page 35

    Troubleshooting 30 Troubleshooting Internet Browsing If your wireless router can obtain an IP address but your computer is unable to load any web pages from the Internet, check the following: • Your computer might not recognize any DNS server addresses . A DNS server is a host on the Internet that translates Internet names (such as www addresses) ...

  • NETGEAR N150 - page 36

    Troubleshooting 31 If the path is not working correctly, you could have one of the following problems: • Wrong physical connections – Make sure the LAN port light is on. If the light is off, follow the instructions in “Basic Setup Checklist” on page 24 . – Check that the corresponding lights are on for your computer’s network interface ...

  • NETGEAR N150 - page 37

    Technical Specifications 32 Technical Specifications Default Configuration Settings This section provides factory default settings and technical specifications for the N150 Wireless Router Model WNR1000v3. Table 3. Home Router Default Configuration Settings Feature Default Setting Router Login Router Login URL http://www. routerlogin.net or http:// ...

  • NETGEAR N150 - page 38

    Technical Specifications 33 Inbound (communications coming in from the Internet) Disabled (bars all unsolicited requests except for traffic on port 80, the http port) Outbound (communications going out to the Internet) Enabled (all) Wireless Wireless Communication Enabled SSID Name NETGEAR Security Disabled Broadcast SSID Enabled Transmission Speed ...

  • NETGEAR N150 - page 39

    Technical Specifications 34 Restoring the Default Password and Configuration Settings You can restore the factory default configuration settings that reset the router’s user name to admin, the password to password, and the IP address to 192.168.1.1 . To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a p ...

  • NETGEAR N150 - page 40

    Related Documents 35 Related Documents This section provides links to reference documents that you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Table 4. Related Documents Document Link Internet Networking and TCP/IP Addressing http://documentation.netgear.com/reference/enu/tcpip/index.htm Preparing ...

  • NETGEAR N150 - page 41

    36 Registration and Certifications Product Registration, Support, and Documentation Register your product at http://www.NETGEAR.com/register . You must register before you can use our telephone support service. Product updates and Web support are always available by going to: http://www.NETGEAR.com/support . Setup documentation is available on the ...

Fabricant NETGEAR Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilNETGEAR N150 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques NETGEAR
- manuels d’utilisations N150
- fiches produit NETGEAR
- dépliants
- ou étiquettes-énergie NETGEAR N150
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation NETGEAR N150.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation NETGEAR N150, manuels d’entretien, brefs manuels ou manuels de l’utilisateur NETGEAR N150. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit NETGEAR N150.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil NETGEAR N150, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser NETGEAR N150 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs NETGEAR N150.

Le manuel d’utilisation complet NETGEAR, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel NETGEAR N150 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières NETGEAR N150, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lNETGEAR N150 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil NETGEAR N150 - qui devraient nous aider dans les premières étapes lors de l'utilisation NETGEAR N150
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de NETGEAR N150
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service NETGEAR N150 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de NETGEAR N150?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec NETGEAR N150, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec NETGEAR N150 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)