Français dropdown-ico

Manuel d’utilisation Cabletron Systems HSIM-FE6

42 pages 0.24 mb
Télécharger

Aller à la page of 42

Summary
  • Cabletron Systems HSIM-FE6 - page 1

    Title Page HSIM-FE6 FEPIM 1 FEPIM 2 SP 9032555-03 HSIM-FE6 User’ s Guide ...

  • Cabletron Systems HSIM-FE6 - page 2

    ...

  • Cabletron Systems HSIM-FE6 - page 3

    HSIM-FE6 User’ s Guide i NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes ha ve been made. The hardware, firmware, or software described in this manual ...

  • Cabletron Systems HSIM-FE6 - page 4

    Notice ii HSIM-FE6 User’ s Guide INDUSTRY CANADA NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limi ...

  • Cabletron Systems HSIM-FE6 - page 5

    Notice HSIM-FE6 User’ s Guide iii CABLETRON SOFTWARE PROGRAM LICENSE 1. LICENSE . You have the right to use only the one (1) copy of the Program provided in this package subject to the terms and conditions of this License Agreement. Y ou may not copy , reproduce or transmit any part of the Program except as permitted by the Copyright Act of the U ...

  • Cabletron Systems HSIM-FE6 - page 6

    Notice iv HSIM-FE6 User’ s Guide SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS THE HSIM-FE6 GIGABIT ETHERNET MODULES USE CLASS 1 LASER TRANSCEIVERS. READ THE FOLLOWING SAFETY INFORMATION BEFORE INSTALLING OR OPERATING THESE ADAPTERS. The Class 1 laser transceiv ers use an optical feedback loop to maintain Class 1 operation limits. This control lo ...

  • Cabletron Systems HSIM-FE6 - page 7

    Notice HSIM-FE6 User’ s Guide v DECLARATION OF CONFORMITY Application of Council Directiv e(s): 89/336/EEC 73/23/EEC Manufacturer’ s Name: Cabletron Systems, Inc. Manufacturer’ s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representativ e Name: Mr. J. Solari European Representativ e Address: Cabletron Systems Limited N ...

  • Cabletron Systems HSIM-FE6 - page 8

    Notice vi HSIM-FE6 User’ s Guide ...

  • Cabletron Systems HSIM-FE6 - page 9

    HSIM-FE6 User’ s Guide vii CONTENTS CHAPTER 1 INTRODUCTION 1.1 Using This Manual ....................................................................... 1-1 1.2 Overview ...................................................................................... 1-2 1.2.1 Connectivity .................................................................... ...

  • Cabletron Systems HSIM-FE6 - page 10

    Contents viii HSIM-FE6 User’ s Guide ...

  • Cabletron Systems HSIM-FE6 - page 11

    HSIM-FE6 User’ s Guide ix FIGURES Figure P age 1-1 HSIM-FE6................................................................................. 1-1 2-1 Removing the FEPIM Coverplate ............................................. 2-3 2-2 Installing the FEPIM ................................................................. 2-4 2-3 Removing the HSIM Co ...

  • Cabletron Systems HSIM-FE6 - page 12

    x HSIM-FE6 User’ s Guide T ABLES T ab le P age 1-1 FEPIM Options .........................................................................1-3 3-1 HSIM-FE6 LEDs ....................................................................... 3-2 3-2 10/100 LED Indications When RX LED Is On ........................... 3-3 3-3 10/100 LED Indications When RX ...

  • Cabletron Systems HSIM-FE6 - page 13

    HSIM-FE6 User’ s Guide 1-1 CHAPTER 1 INTR ODUCTION W elcome to the Cabletron Systems HSIM-FE6 User’s Guide . This manual describes the HSIM-FE6 and provides information concerning features, installation, troubleshooting, and specifications. A general working kno wledge of Ethernet and data communications networks and their physical layer compo ...

  • Cabletron Systems HSIM-FE6 - page 14

    Chapter 1: Introduction 1-2 HSIM-FE6 User’ s Guide Chapter 3 , LANVIEW LEDs , describes ho w to use the HSIM-FE6 LEDs to monitor the HSIM performance and status. Appendix A , Specifications , lists the operating specifications and regulatory compliance of the HSIM-FE6. Appendix B , FEPIM Specifications , describes the FEPIM specifications and ...

  • Cabletron Systems HSIM-FE6 - page 15

    FEPIM Options HSIM-FE6 User’ s Guide 1-3 1.3 FEPIM OPTIONS The FEPIM options for the HSIM-FE6 are listed in T able 1-1 . Check the Release Notes with the host platform for changes or additions to this list. 1.4 DOCUMENT CON VENTIONS The follo wing con ventions are used throughout this document: T able 1-1 FEPIM Options P art Number Connector Medi ...

  • Cabletron Systems HSIM-FE6 - page 16

    Chapter 1: Introduction 1-4 HSIM-FE6 User’ s Guide 1.5 GETTING HELP For additional support related to this de vice or document, contact the Cabletron Systems Global Call Center: Before calling the Cabletron Systems Global Call Center, have the following information ready: • Y our Cabletron Systems service contract number • A description of th ...

  • Cabletron Systems HSIM-FE6 - page 17

    Related Documentation HSIM-FE6 User’ s Guide 1-5 1.6 RELATED DOCUMENTATION The documentation for the host de vice in which the HSIM-FE6 is to be installed provides additional information about the setup of the HSIM-FE6. This user’ s guide references procedures in these documents, where appropriate, but does not repeat them. These documents can ...

  • Cabletron Systems HSIM-FE6 - page 18

    Chapter 1: Introduction 1-6 HSIM-FE6 User’ s Guide ...

  • Cabletron Systems HSIM-FE6 - page 19

    HSIM-FE6 User’ s Guide 2-1 CHAPTER 2 INSTALLATION T o install the HSIM-FE6 the following items are required: • Antistatic wrist strap • Phillips scre wdri ver • Fast Ethernet (Port) Interf ace Modules (FEPIMs) in the appropriate media 2.1 UNPACKING THE HSIM-FE6 Unpack the HSIM-FE6 as follo ws: 1. Remove the HSIM-FE6 from the shipping box. 2 ...

  • Cabletron Systems HSIM-FE6 - page 20

    Chapter 2: Installation 2-2 HSIM-FE6 User’ s Guide 2.2 INSTALLING FAST ETHERNET (P ORT) INTERFACE MODULES Fast Ethernet (Port) Interf ace Modules (FEPIMs) must be installed in the HSIM-FE6 before installing the HSIM-FE6 in the host de vice. The FEPIMs provide connecti vity to the network. At least one FEPIM must be installed in either port one or ...

  • Cabletron Systems HSIM-FE6 - page 21

    Installing Fast Ethernet (P ort) Interface Modules HSIM-FE6 User’ s Guide 2-3 Figure 2-1 Removing the FEPIM Co verplate 2. Refer to Figure 2-2 . Gently pull the faceplate of the HSIM-FE6 forward to allow room for the FEPIM to be aligned over the connector. 3. Align the FEPIM connector into the HSIM-FE6 connector pins. See Figure 2-2 . ! CA UTION ...

  • Cabletron Systems HSIM-FE6 - page 22

    Chapter 2: Installation 2-4 HSIM-FE6 User’ s Guide Figure 2-2 Installing the FEPIM 4. Press down firmly on the FEPIM until the pins slide all the way into the HSIM-FE6 connector. Ensure that the FEPIM seats flush on the standoffs. 5. Secure the FEPIM using the screws enclosed in the FEPIM packaging. The screw used to attach the rear of the FEPIM ...

  • Cabletron Systems HSIM-FE6 - page 23

    Installing the HSIM-FE6 HSIM-FE6 User’ s Guide 2-5 2.3 INSTALLING THE HSIM-FE6 An HSIM-FE6 can be installed in any Cabletron Systems de vice that supports HSIM technology (e.g., 2H252-25R, 2E42-27, 6E132-25). The follo wing subsections provide generic instructions for installing an HSIM-FE6 in either an interface module or in a standalone de vice ...

  • Cabletron Systems HSIM-FE6 - page 24

    Chapter 2: Installation 2-6 HSIM-FE6 User’ s Guide 5. Remove and save the two faceplate mounting screws securing the HSIM coverplate and remove the coverplate. See Figure 2-3 . Figure 2-3 Removing the HSIM Co verplate 6. Refer to Figure 2-4 and place the HSIM-FE6 behind the module faceplate. Faceplate Mounting Screws HSIM Coverplate 2555_03 ...

  • Cabletron Systems HSIM-FE6 - page 25

    Installing the HSIM-FE6 HSIM-FE6 User’ s Guide 2-7 Figure 2-4 Installing the HSIM-FE6 7. Align the connector on the HSIM-FE6 with the connector on the module. 8. Press down firmly on the connector area of the HSIM-FE6 until the connector slides all the way onto the pins. Ensure that the standoffs on the interface module align with the standoff sc ...

  • Cabletron Systems HSIM-FE6 - page 26

    Chapter 2: Installation 2-8 HSIM-FE6 User’ s Guide 9. Secure the HSIM-FE6 to the module faceplate using the mounting screws saved in step 5 . 10. Secure the HSIM-FE6 to the module standoffs using the standoff screws included in the HSIM-FE6 shipping materials. 11. Reinstall the interface module in the chassis. 12. Reattach the network cabling to ...

  • Cabletron Systems HSIM-FE6 - page 27

    Connecting to the Network HSIM-FE6 User’ s Guide 2-9 8. Press down firmly on the HSIM-FE6 until the connector slides all the way onto the HSIM pins. Ensure that the standoffs on the standalone device align with the standoff screw holes on the HSIM-FE6. 9. Secure the HSIM-FE6 to the module faceplate using the mounting screws saved in step 5 . 10. ...

  • Cabletron Systems HSIM-FE6 - page 28

    Chapter 2: Installation 2-10 HSIM-FE6 User’ s Guide 2.4.1 Connecting a Fiber Optic Segment to the FEPIM Cabletron Systems of fers fiber optic cables that use SC style connectors which are ke yed to ensure proper crossov er of the transmit and recei ve fibers. 1. Remove the protective covers from the fiber optic ports and from the ends of the co ...

  • Cabletron Systems HSIM-FE6 - page 29

    Connecting to the Network HSIM-FE6 User’ s Guide 2-11 4. Verify that a link exists by checking that the port receive LED is ON (flashing amber, blinking green, or solid green). If the receive LED is OFF and the transmit LED is not blinking amber, perform the following steps until it is ON: a. Check that the po wer is turned on for the de vice at ...

  • Cabletron Systems HSIM-FE6 - page 30

    Chapter 2: Installation 2-12 HSIM-FE6 User’ s Guide A schematic of a straight-through and a crossov er cable is sho wn in Figure 2-6 . If the wires do not cross ov er , use the switch on the FE-100TX to internally cross ov er the RJ45 port. Figure 2-5 sho ws ho w to properly set the FE-100TX crossov er switch. Figure 2-6 T wisted Pair Cab ling Co ...

  • Cabletron Systems HSIM-FE6 - page 31

    Connecting to the Network HSIM-FE6 User’ s Guide 2-13 3. Verify that a link exists by checking that the port receive LED is on (flashing amber, blinking green, or solid green). If the receive LED is off, perform the following steps until it is on: a. V erify that the 100BASE-TX de vice at the other end of the twisted pair segment is po wered up. ...

  • Cabletron Systems HSIM-FE6 - page 32

    Chapter 2: Installation 2-14 HSIM-FE6 User’ s Guide ...

  • Cabletron Systems HSIM-FE6 - page 33

    HSIM-FE6 User’ s Guide 3-1 CHAPTER 3 LANVIEW LEDs This chapter describes ho w to use the LANVIEW LEDs to monitor the HSIM-FE6 status and diagnose HSIM-FE6 problems. 3.1 HSIM-FE6 LEDs Refer to Figure 3-1 for the location of the HSIM-FE6 LEDs and T able 3-1 for a description of the LED indications. Figure 3-1 HSIM-FE6 LANVIEW LEDs NO TE The terms f ...

  • Cabletron Systems HSIM-FE6 - page 34

    Chapter 3: LANVIEW LEDs 3-2 HSIM-FE6 User’ s Guide 3.2 FE-100TX LED The optional FE-100TX has one LED labeled 10/100. The 10/100 LED together with the RX LED allo ws the user to determine the link status and the operating speed of the Fast Ethernet (Port) Interf ace Module. The 10/100 LED and the Recei ve (RX) LED are sho wn in Figure 3-2 . T abl ...

  • Cabletron Systems HSIM-FE6 - page 35

    HSIM-FE6 Local Management HSIM-FE6 User’ s Guide 3-3 f 3.3 HSIM-FE6 LOCAL MANAGEMENT F or inf ormation concer ning Local Management for the HSIM-FE6, ref er to the host de vice manual. NO TE A link e xists if the associated por t RX LED is on. T able 3-2 10/100 LED Indications When RX LED Is On LED Color Indication 10/100 Off FE-100TX is operatin ...

  • Cabletron Systems HSIM-FE6 - page 36

    Chapter 3: LANVIEW LEDs 3-4 HSIM-FE6 User’ s Guide ...

  • Cabletron Systems HSIM-FE6 - page 37

    HSIM-FE6 User’ s Guide A-1 APPENDIX A SPECIFICATIONS This chapter lists the specifications and regulatory requirements for the HSIM-FE6. Cabletron Systems reserves the right to change these specifications at any time without notice. A.1 PHYSICAL PR OPER TIES A.2 EN VIRONMENTAL REQUIREMENTS A.3 FEPIM OPTIONS The FEPIM options for the HSIM-FE6 in ...

  • Cabletron Systems HSIM-FE6 - page 38

    Appendix A: Specifications A-2 HSIM-FE6 User’ s Guide A.4 REGULATORY COMPLIANCE This equipment meets the follo wing safety and electromagnetic compatibility (EMC) requirements: Saf ety UL 1950, CSA C22.2 No .950, EN 60950, IEC 950, and 73/23/EEC Electromagnetic Compatibility (EMC) FCC P ar t 15, EN 55022, CSA C108.8, EN 50082-1, VCCI V -3, 89/33 ...

  • Cabletron Systems HSIM-FE6 - page 39

    HSIM-FE6 User’ s Guide B-1 APPENDIX B FEPIM SPECIFICATIONS This appendix provides specifications for the F ast Ethernet (Port) Interface Modules. Cabletron Systems reserv es the right to change these specifications at any time without notice. The HSIM-FE6 supports the follo wing Fast Ethernet (Port) Interf ace Modules: the FE-100TX , the FE-100 ...

  • Cabletron Systems HSIM-FE6 - page 40

    Appendix B: FEPIM Specifications B-2 HSIM-FE6 User’ s Guide B.2 FE-100FX The FE-100FX sho wn in Figure B-2 uses an SC style connector that supports multimode fiber optic cabling. Specifications for the FE-100FX are listed in T able B-1 , below . Figure B-2 FE-100FX Table B-1 Transmitter Power Cable T ype W orst Case Budget T ypical Budget 50/1 ...

  • Cabletron Systems HSIM-FE6 - page 41

    FE-100F3 HSIM-FE6 User’ s Guide B-3 B.3 FE-100F3 The FE-100F3 sho wn in Figure B-3 uses an SC style connector that supports single mode fiber optic cabling. Specifications for the FE-100F3 are listed in T able B-2 , below . Figure B-3 FE-100F3 Table B-2 Transmitter Power Cable T ype W orst Case Budget T ypical Budget 8/125 µm fiber optic > ...

  • Cabletron Systems HSIM-FE6 - page 42

    Appendix B: FEPIM Specifications B-4 HSIM-FE6 User’ s Guide ...

Fabricant Cabletron Systems Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilCabletron Systems HSIM-FE6 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Cabletron Systems
- manuels d’utilisations HSIM-FE6
- fiches produit Cabletron Systems
- dépliants
- ou étiquettes-énergie Cabletron Systems HSIM-FE6
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Cabletron Systems HSIM-FE6.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Cabletron Systems HSIM-FE6, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Cabletron Systems HSIM-FE6. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Cabletron Systems HSIM-FE6.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Cabletron Systems HSIM-FE6, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Cabletron Systems HSIM-FE6 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Cabletron Systems HSIM-FE6.

Le manuel d’utilisation complet Cabletron Systems, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Cabletron Systems HSIM-FE6 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Cabletron Systems HSIM-FE6, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCabletron Systems HSIM-FE6 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Cabletron Systems HSIM-FE6 - qui devraient nous aider dans les premières étapes lors de l'utilisation Cabletron Systems HSIM-FE6
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Cabletron Systems HSIM-FE6
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Cabletron Systems HSIM-FE6 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Cabletron Systems HSIM-FE6?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Cabletron Systems HSIM-FE6, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cabletron Systems HSIM-FE6 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)