Français dropdown-ico

Manuel d’utilisation Bolens 12229

32 pages 0.94 mb
Télécharger

Aller à la page of 32

Summary
  • Bolens 12229 - page 1

    OWNER’S MANUAL Rear -T ine T iller • Safety • Assembly • Features and Controls • Operation • Maintenance • Parts List GARDEN WAY INCORPORATED SAFETY FIRST! Before operating this equipment, read this Owner's Manual and the separate manual supplied by the engine manufacturer . Model 12229 ...

  • Bolens 12229 - page 2

    2 T able of Contents SECTION 1: SAFETY ........................................... 3 Safety Decals ............................................................. 5 Operating Symbols ..................................................... 5 SECTION 2: ASSEMBLY ....................................... 6 Attach Handlebar .................................. ...

  • Bolens 12229 - page 3

    Safety 1 Section 3 T raining 1. Carefully read this Owner ’ s Manual, the separate Engine Owner ’ s Manual, and any other literature you may receive. Be thor- oughly familiar with the controls and the proper use of the tiller and its engine. Know how to stop the unit and disengage the controls quickly. 2. Never allow children to operate the til ...

  • Bolens 12229 - page 4

    4 Section 1: Safety 4 . Exercise caution to avoid slipping or falling. 5 . If the unit should start to vibrate abnor- mally, stop the engine, disconnect the spark plug wire and prevent it from touching the spark plug, and check imme- diately for the cause. Vibration is gener- ally a warning of trouble. 6 . Stop the engine, disconnect the spark plug ...

  • Bolens 12229 - page 5

    Figure 1-2: Location of safety and operating decals. Section 1: Safety 5 Decals For your safety and the safety of others, various safety and opera- tional decals are located on your unit (see Figure 1-2). Keep the decals clean and legible at all times. Contact your local ser- vice dealer for replacements if any decals are damaged or missing. Refer ...

  • Bolens 12229 - page 6

    Assembly 2 Section 6 INTRODUCTION Carefully follow these assembly steps to correctly prepare your tiller for use. It is recommended that you read this Section in its entirety before beginning assembly. NOTE: Various tiller models are presented in this Manual. Use only the information appropriate for your tiller model. INSPECT UNIT Inspect the unit ...

  • Bolens 12229 - page 7

    Section 2: Assembly 7 2. Remove the hairpin cotter (L, Fig. 2-3) and wheel drive pin (M) from the wheel hub (O) and wheel shaft (N). 3. Slide the wheel fully inward on the wheel shaft (N, Fig. 2-3). Reinstall the wheel drive pin (M) through the wheel shaft only (not through the wheel hub). Secure the wheel drive pin with the hairpin cotter (L), pus ...

  • Bolens 12229 - page 8

    4. Thread the #10-24 hex nut (Z, Fig. 2-5) halfway onto the screw (V). 5. Thread the screw (V) into the cable adjuster (X). 6. Hook the cable spring (W, Fig. 2-6) into the V-shaped bend in the Forward Clutch Bail (Y). 7. Check for correct tension on the for- ward drive belt by taking two measure- ments of the cable spring, as follows: a. With the F ...

  • Bolens 12229 - page 9

    Section 2: Assembly 9 STEP 6: ADD MOTOR OIL TO ENGINE The tiller is shipped without oil in the engine. IMPORTANT: Do not start the engine without first adding motor oil. Severe engine damage will result if the engine is run without oil. 1. Refer to the separate Engine Owner ’ s Manual for engine oil specifications and capacities. 2. With the till ...

  • Bolens 12229 - page 10

    Features and Controls 3 Section 10 INTRODUCTION This Section describes the location and function of the controls on your tiller. Refer to the following Section, Operation for detailed operating instructions. Practice using these controls, with the engine shut off, until you understand the operation of the controls and feel confi- dent with each of ...

  • Bolens 12229 - page 11

    Section 3: Features and Controls 11 FORWARD CLUTCH BAIL The Forward Clutch Bail (E, Figure 3-4) controls the engagement of forward drive to the wheels and tines. To operate the Forward Clutch Bail: 1. Put wheels in WHEEL DRIVE position (see “ WARNING ” statement above). 2. Lift and hold the clutch bail (E, Figure 3-4) against the handlebar to s ...

  • Bolens 12229 - page 12

    Operation 4 Section 12 INTRODUCTION Read this Operation Section and the sepa- rate Engine Owner ’ s Manual before you start the engine. Then, take the time to familiarize yourself with the basic opera- tion of the tiller before using it in the garden. Find an open, level area and prac- tice using the tiller controls without the tines engaging the ...

  • Bolens 12229 - page 13

    Section 4: Operation 13 Stopping the Engine and Tiller 1. To stop the wheels and tines, release the Forward Clutch Bail. 2. To stop the engine, put the ignition switch and/or the throttle control lever in the “ OFF ” or “ STOP ” position. OPERA TING THE TILLER The following operating instructions pro- vide guidelines to using your tiller ef ...

  • Bolens 12229 - page 14

    14 Section 4: Operation Preparing Seedbeds Fig. 4-5 Fig. 4-6 • If the garden size will not permit lengthwise and then crosswise tilling, then overlap the first passes by one-half a tiller width, followed by successive passes at one- quarter width (see Fig. 4-7). With planning, you can allow enough room between rows to cultivate (see Fig. 4-8). Le ...

  • Bolens 12229 - page 15

    Section 4: Operation 15 TILLING TIPS & TECHNIQUES (cont.) Power composting simply means tilling under and burying in the soil all manner of organic matter such as crop residues, leaves, grass clippings and cover crops. This material will decompose during the non-growing season and add important natural nutri- ents to the soil. The first place t ...

  • Bolens 12229 - page 16

    16 Section 4: Operation The tines have a self-clearing action which eliminates most tangling of debris in the tines. However, occasionally dry grass, stringy stalks or tough vines may become tangled. Follow these procedures to help avoid tangling and to clean the tines, if necessary. • To reduce tangling, set the depth regulator deep enough to ge ...

  • Bolens 12229 - page 17

    Figure 5-1: Tine shields removed for clarity. Maintenance 5 Section 17 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can resu ...

  • Bolens 12229 - page 18

    18 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING 4. The gear oil level is correct ...

  • Bolens 12229 - page 19

    Section 5: Maintenance 19 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING CHECKING AND ADJUSTING FORWARD DR ...

  • Bolens 12229 - page 20

    20 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING FORWARD CLUTCH BAIL ADJUSTMENT If ...

  • Bolens 12229 - page 21

    Section 5: Maintenance 21 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING CARBURETOR/GOVERNOR CONTROL ADJUS ...

  • Bolens 12229 - page 22

    22 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING TROUBLESHOOTING Before performing ...

  • Bolens 12229 - page 23

    Model 12229 Parts List 23 DRA WING NO. 1 1 9552 Hex Hd. Flange Screw, Self-Tapping, 1/4-20 x 1/2 ................................... 2 3 1916417 Decal - Read Owner ’ s Manual ............. 1 5 1918705 Tine Hood (Incl. tine flap and Ref. 3) ............................................. 1 6 1100088 Hex Hd. Screw, 5/16-18 x 1/2 ............. 2 7 118 ...

  • Bolens 12229 - page 24

    Model 12229 24 Parts List DRA WING NO. 2 ...

  • Bolens 12229 - page 25

    Model 12229 Parts List 25 P ARTS LIST - DRA WING NO. 2 REF. PART No. No. DESCRIPTION QTY. REF. PART No. No. DESCRIPTION QTY. 1 55104 Upper Handlebar (Incl. Ref. 2) ............ 1 2 1916928 Decal, Forward Clutch Bail .................. 1 3 1100799 Hex Hd. Screw, 5/16-18 x 1-1/2 .......... 6 4 1100806 Hex Hd. Screw, 1/4-20 x 1-1/4 ............ 1 5 55 ...

  • Bolens 12229 - page 26

    Model 12229 26 Parts List DRA WING NO. 4 REF. PART No. No. DESCRIPTION QTY. REF. PART No. No. DESCRIPTION QTY. 1 9512 Retainer, Snap Ring, “ E ” Type ........... 2 2 9511 Retainer, Snap Ring .......................... 4 3 1166-1 Shim, 0.062" thick ............................. A/R 1166-2 Shim, 0.030" thick ............................ ...

  • Bolens 12229 - page 27

    Model 12229 Parts List 27 DRA WING NO. 5 1 9727 Plug, Transmission Oil Fill .................. 1 2 1186328 Hex Hd. Flange Screw, 5/16-18 x 5/8, Grade 5 .......................................... 8 5 1916641001 Front Cover, Transmission .................. 1 5A 50074 Rear Cover, Transmission ................... 1 6 50032 Gasket, Housing Cover ....... ...

  • Bolens 12229 - page 28

    Model 12229 28 Parts List 44 11 45 13 30 46 47 15 10 26 12 25 21 36 15, 47 30 28 24 22 17 27 32 34 34 16 18 3 8 7 7 23 31 9 20 35 3 2 5 6 14 7 3 3 24 4 17 1 Forward Clutch Cable DRA WING NO. 6 ...

  • Bolens 12229 - page 29

    Model 12229 Parts List 29 P ARTS LIST - DRA WING NO. 6 1 * Engine, Recoil Start ............................. 1 2 1917326001 Bracket, Belt Cover.............................. 1 3 1100242 Lock Washer, 5/16 ............................. 8 4 1111696 Hex Hd. Screw, 5/16-24 x 1/2 ............ 2 5 1916419 Decal, Hot Surfaces Warning ............. 1 6 191 ...

  • Bolens 12229 - page 30

    Model 12229 30 Parts List DRA WING NO. 7 RIGHT SIDE LEFT SIDE Left Hand Tine Right Hand Tine Hold Tine With Blunt End Toward You NOTE: Identify Left and Right sides of tiller by standing in operator position and facing direction of forward travel. ...

  • Bolens 12229 - page 31

    Model 12229 Parts List 31 P ARTS LIST - DRA WING NO. 7 1 9711 Hex Hd. Screw, 3/8-16 x 1, Grade 5 ...... 16 2 50049-01 Bolo Tine - Right Hand. Single tine used on left side of tiller. (Incl. two each Refs. 1 & 3) ....................................... 8 3 1733398 Hex Lock Nut, 3/8-16 ............................ 18 4 9555 Hex Hd. Screw, 3/8-16 ...

  • Bolens 12229 - page 32

    CUSTOMER SERVICE INFORMA TION Owner Registration Card Please fill out and mail the enclosed owner registration card. The purpose of this card is to register each unit at the Factory so that we can provide you with warranty benefits and informational bulletins. Warranty Service The warranty statement is included in the unit ’ s literature package. ...

Fabricant Bolens Catégorie Tiller

Les documents que nous recevons du fabricant de l'appareilBolens 12229 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Bolens
- manuels d’utilisations 12229
- fiches produit Bolens
- dépliants
- ou étiquettes-énergie Bolens 12229
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Bolens 12229.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Bolens 12229, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Bolens 12229. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Bolens 12229.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Bolens 12229, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Bolens 12229 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Bolens 12229.

Le manuel d’utilisation complet Bolens, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Bolens 12229 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Bolens 12229, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBolens 12229 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Bolens 12229 - qui devraient nous aider dans les premières étapes lors de l'utilisation Bolens 12229
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Bolens 12229
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Bolens 12229 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Bolens 12229?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Bolens 12229, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Bolens 12229 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)