Manuel d’utilisation Technika 32-2011

39 pages 4.01 mb
Télécharger

Aller à la page of 39

Summary
  • Technika 32-2011 - page 1

    COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 32-201 1 ...

  • Technika 32-2011 - page 2

    English - 1 - Contents T imers ............................................................... 14 Conditional Access ........................................... 14 TV Setup ........................................................... 14 Setup ................................................................ 15 Analogue TV Menu System ................ ...

  • Technika 32-2011 - page 3

    English - 2 - Accessories MENU / INFO EPG FAV PRESETS SUBTITLE RETURN SOURCE SLEEP SCREEN LANG. Remote Controller Batteries: 2 X AAA Instruction Book Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition s ...

  • Technika 32-2011 - page 4

    English - 3 - Information for Users in European Union Countries This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in EU. For more information, please contact the l ...

  • Technika 32-2011 - page 5

    English - 4 - Environmental Information • This television is designed to consume less energy to save environment. Y ou not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy ef fi ciency feauture of this TV . T o reduce energy consumption, you should take the following steps: • Y ou ...

  • Technika 32-2011 - page 6

    English - 5 - Overview of the Remote Control Standby 1. Image size 2. Sleep timer 3. Numeric buttons 4. Return / Exit / TXT Index 5. Cursor up / TXT up page 6. Cursor left 7. Programme up / Page down (in DTV mode) 8. Programme down / Page up (in DTV mode) 9. Mono-Stereo / Dual I-II 10. Swap 1 1. Electronic programme guide (in DTV mode) 12. Info / T ...

  • Technika 32-2011 - page 7

    English - 6 - LCD TV and Operating Buttons FRONT and REAR VIEW SIDE VIEW Control Buttons Standby button 1. TV/A V button 2. Programme Up/Down 3. buttons V olume Up/Down buttons 4. Note: Press “ ” /“ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors SCART socket inputs or outputs for external devices. 1. ...

  • Technika 32-2011 - page 8

    English - 7 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section. Component Video Inputs (YPbPr) 2. are used for connecting component video.Y ou can connect the component video and audio ...

  • Technika 32-2011 - page 9

    English - 8 - Connecting the LCD TV to a PC For displaying your computer ’s screen image on your LCD TV , you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV .Use an audio cable between audio inputs of the TV (side) and ...

  • Technika 32-2011 - page 10

    English - 9 - Using Side A V Connectors Y ou can connect a range of optional equipment to your LCD TV . Possible connections are shown below . Note that cables shown in the illustration are not supplied. • For connecting a camcorder , connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input ...

  • Technika 32-2011 - page 11

    English - 10 - Input Selection Once you have connected external systems to your TV , you can switch to different input sources. • Press “ SOURCE ” button on your remote control for directly changing sources. or • Select “ Source ” option from the main menu by using “ ” or “ ” button. Use then “ ” or “ ” button to highlig ...

  • Technika 32-2011 - page 12

    English - 1 1 - After Automatic Search is completed, the following message asking for analogue channel search appears on the screen: T o search for analogue channels, select “Y es”. TV switches to the analogue TV mode. The menu is displayed to search for analogue channels. Select your Country , Language and T ext language by using “ ” or ? ...

  • Technika 32-2011 - page 13

    English - 12 - Digital T eletext (** for UK only) • Press the “ ” button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital teletext screen. • Whe ...

  • Technika 32-2011 - page 14

    English - 13 - Note: If you enter the same programme number of the channel that you want to move, “.... channel services will be replaced. Do you want to continue?” On Screen Display (OSD) will be displayed. Press OK to con fi rm or select “No” to cancel. Deleting the Channels in the Channel List • Press “ ” or “ ” button to sele ...

  • Technika 32-2011 - page 15

    English - 14 - How to Add a Channel to a Favourites List • By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list. • By pressing “ OK ” button, the highlighted channel is added to the Favourite List. • F icon indicates that a channel is added to Favourite List. Removing a Channel from Favo ...

  • Technika 32-2011 - page 16

    English - 15 - Setup The adjustments in this menu are given as the following: Con fi guration Y ou can con fi gure the settings of your TV . Select Con fi guration from Setup menu and press “ OK ” to view this menu. Press the “ RETURN ” button on the remote control to exit. Dolby D Digital (* for EU countries only) (optional) In the Con ...

  • Technika 32-2011 - page 17

    English - 16 - ALL MENUS : All Menus are accessible only with the correct lock key . So the user cannot add, delete, rename, channels, cannot set timers. INST ALLA TION MENU : Installation menu is locked. So the user can’t add channels. Changes will be updated after exiting ‘Con fi guration Menu’. Set PIN Use “ ” or “ ” buttons to go ...

  • Technika 32-2011 - page 18

    English - 17 - Preferred These settings will be used if available. Otherwise the current settings will be used. • Audio : by pressing “ ” or “ ” keys change the audio language. • Subtitle : alter the subtitle language with “ ” or “ ” keys. The chosen language will be seen in subtitles. Movie Subtitle (optional) • In order to d ...

  • Technika 32-2011 - page 19

    English - 18 - Select your Country , Language and T ext language by using “ ” or “ ” and “ ” or “ ” buttons. Press “ OK ” or RED button to continue. T o cancel, press BLUE button. The following menu will be displayed during the automatic tuning: After APS is fi nalized, the programme table will appear on the screen. In the prog ...

  • Technika 32-2011 - page 20

    English - 19 - Colour T emp Press “ ” or “ ” button to select Colour T emp . Press “ ” or “ ” to choose from one of these options: Cool , Normal and Warm . Note : • Setting Cool option gives white colours a slight blue stress. • Setting Warm option gives white colours a slight red stress. • For normal colours, select Normal op ...

  • Technika 32-2011 - page 21

    English - 20 - Headphone Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu. Headphone sub-menu options are described below: V olume Press “ ” or “ ” button to select V olume . Press “ ” button to increase headphone volume level. Press “ ” button to decrease headphone volume level. ...

  • Technika 32-2011 - page 22

    English - 21 - T eletext Language Press “ ” or “ ” button to select T eletext Language . Use “ ” or “ ” button to change T eletext Language to West, East , T urk/Gre , Cyrillic, Arabic or Persian . HDMI PC Full Mode (optional) If you want to view PC screen in HDMI mode by using external connection, HDMI PC FULL MODE option should be ...

  • Technika 32-2011 - page 23

    English - 22 - Programme T able Select Programme T able by pressing “ ” or “ ” button. Press “ ” to display Programme T able: By moving the cursor in four directions you can reach 20 programmes in the same page. Y ou can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the A ...

  • Technika 32-2011 - page 24

    English - 23 - PC Mode Menu System See “ Connecting the LCD TV to a PC ” section for connecting a PC to the TV set. For switching to PC source, press “ SOURCE ” button on your remote control and select PC input. Y ou can also use “ Source ” menu to switch to PC mode. Note that PC mode menu settings are available only while the TV is in ...

  • Technika 32-2011 - page 25

    English - 24 - Zoom Modes Y ou can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. Press “ SCREEN ” button to directly change the zoom mode. Available zoom modes are listed below . Note : In YPbPr and HDMI modes, while in 720p-1080i resolutions, only 16:9 mode is available. Zoom mode cannot be cha ...

  • Technika 32-2011 - page 26

    English - 25 - T eletext T eletext system is available if your broadcaster supports T eletext function buttons are listed below: “ ” T eletext / Mix / P A T Mode Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix). Pressing this button again will split the screen into two windows, one dis ...

  • Technika 32-2011 - page 27

    English - 26 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1600 X 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below . If you switch your PC to an unsupported mode, a warning On S ...

  • Technika 32-2011 - page 28

    English - 27 - Appendix B: A V and HDMI Signal Compatibility (Input Signal T ypes) Source Supported Signals A vailable EXT -1 (SCART) P AL 50/60 O NTSC 60 O RGB 50 O RGB 60 O FAV P AL 50/60 O NTSC 60 O YPbPr 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O HDMI1 HDMI2 480I 6 ...

  • Technika 32-2011 - page 29

    English - 28 - TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for UK models 170-862 ...

  • Technika 32-2011 - page 30

    English - 29 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply . MAINS (AC) OPERA TION The wires in the mains lead are coloured in accordance with the following code : IMPORT ANT As the colours of the wires in the mains lead of this appliance may not correspon ...

  • Technika 32-2011 - page 31

    English - 30 - Contents Features ............................................................... 30 General Properties............................................ 30 Safety Information ................................................ 31 Notes on Discs ..................................................... 31 On handling discs ....................... ...

  • Technika 32-2011 - page 32

    English - 31 - Safety Information CAUTION DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed. CLASS 1 LASER PRODUCT • Manufactured under license from Dolby Laboratories. “Dolby”, and the double-D symbol are ...

  • Technika 32-2011 - page 33

    English - 32 - DVD Control Panel Buttons A. Disc loader B. Play / Pause Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc. C. Stop / Eject Stop playing disc / Eject or Load the disc Note: • Y ou cannot eject the disc ...

  • Technika 32-2011 - page 34

    English - 33 - General Operation Y ou can operate DVD, movie CD, music or picture CD’ s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons on the Remote Control DVD Playback Movie Playback Picture Playback Music Playback   Play Play Play Play  Pause Pause ...

  • Technika 32-2011 - page 35

    English - 34 - General Playback Basic Play Press on the power button 1. Please insert a disc to the loader . 2. The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it. A menu may appear on the TV screen after a few moments or the fi lm may start immediately after the introduction of the Film Com ...

  • Technika 32-2011 - page 36

    English - 35 - Preferences DEF AUL T If you choose RESET and press SELECT , the factory- presets are loaded. Parental level and parental password does not change. DOWNMIX This mode can be selected when the digital audio output of the TV is used. SURROUND: Surround sound output. STEREO: T wo channels stereo. P ARENT AL (Parental Level) Playing some ...

  • Technika 32-2011 - page 37

    English - 36 - No response from remote control • Make sure the remote control is in the correct mode. • Check batteries are fi tted correctly . • Change the batteries. If nothing works If you have tried the above solutions and none seem to work, try switching your TV -DVD off and on again. If this does not work, contact your supplier or TV - ...

  • Technika 32-2011 - page 38

    English - 37 - Disc T ypes Compatible with This Unit DI GI TAL AUDIO DVD AU D I O - CD Audi o + Vi d e o 12 cm Audi o 8c m 12 cm 8c m Audi o ( xxxx. m p3 ) MP 3 - CD JPE G RE ADAB LE PI C TURE- C D Vi d e o ( st i l l pi ct ur e ) • MP3 is rec o rd ed as a Digital Sig nal w ith be tter au d io qu ality, l es s disto rtion and l e ss de t e r ior ...

  • Technika 32-2011 - page 39

    50174932 ...

Fabricant Technika Catégorie CRT Television

Les documents que nous recevons du fabricant de l'appareilTechnika 32-2011 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Technika
- manuels d’utilisations 32-2011
- fiches produit Technika
- dépliants
- ou étiquettes-énergie Technika 32-2011
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Technika 32-2011.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Technika 32-2011, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Technika 32-2011. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Technika 32-2011.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Technika 32-2011, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Technika 32-2011 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Technika 32-2011.

Le manuel d’utilisation complet Technika, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Technika 32-2011 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Technika 32-2011, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lTechnika 32-2011 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Technika 32-2011 - qui devraient nous aider dans les premières étapes lors de l'utilisation Technika 32-2011
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Technika 32-2011
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Technika 32-2011 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Technika 32-2011?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Technika 32-2011, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Technika 32-2011 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)