Manuel d’utilisation JBL A6000GTi

12 pages 1.68 mb
Télécharger

Aller à la page of 12

Summary
  • JBL A6000GTi - page 1

    car audio pow er amplifier o wner’ s manual THANK Y OU for purchasing a JBL A6000GT i or A3000GT i amplifier . For warranty support, please register your purchase at www .jbl.com. Select Car Audio, then click on Support, and then click on Product Registration. Also, please retain your original purchase receipt and packing crate in case you must s ...

  • JBL A6000GTi - page 2

    INST ALLA TION W ARNING: Playing loud music in an automobile can hinder your ability to hear traffic and permanently damage your hearing. We recommend listening at low or moderate levels while driving your car . JBL accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product. IMPORT ANT : ...

  • JBL A6000GTi - page 3

    DESIGNING A SPEAKER SY STEM FOR THE GTi AMPLIFIER NOTE: Although the JBL A6000GT i or A3000GT i amplifier will drive a system made up of any subwoofers, we recommend using JBL GT i subwoofers with GT i amplifiers. Both the JBL A6000GT i and A3000GT i amplifiers provide RMS power that exceeds the RMS power -handling rating of nearly every subwoofer ...

  • JBL A6000GTi - page 4

    4 SUPPL YING POWER TO THE GTi AMPLIFIER POWER IN IS POWER OUT In order to get full power out of your amplifier , you must provide full power to your amplifier . That’ s a basic rule of physics. The A6000GT i amplifier can draw nearly 800 amperes when reproducing sine waves at full output. Both JBL A6000GT i and A3000GT i amplifiers can quickly ex ...

  • JBL A6000GTi - page 5

    5 MAKING THE CONNECTIONS POWER CONNECTIONS Use 0-gauge cable to connect the amplifier’ s GND – terminal directly to the vehicle’ s chassis (see Figure 5). Scrape off all paint from the metal area for a good, clean ground connection. Make sure the ground wire is as short as possible and is connected to metal on the vehicle’ s body. Do not co ...

  • JBL A6000GTi - page 6

    6 MAKING THE CONNECTIONS A6000GTi SPEAKER CONNECTIONS The A6000GT i is a 2-channel amplifier designed to drive subwoofers only . The left and right input signals are combined inside the amplifier to provide a mono output signal, no matter which output mode is selected. The A6000GT i can be connected to two independent speaker systems in 2-channel m ...

  • JBL A6000GTi - page 7

    7 MAKING THE CONNECTIONS A3000GTi SPEAKER CONNECTIONS Included below are three application diagrams that will help you plan your A3000GT i installation. Figures 10 through 12 show how to configure the JBL A3000GT i amplifier for bridged-mono, parallel-mono and 2-channel operation (also see Setting Up the GT i Amplifier). NOTE: For simplicity , Figu ...

  • JBL A6000GTi - page 8

    8 SETTING UP THE GTi AMPLIFIER SETTING THE CROSSO VER IMPORT ANT : If you plan to use the A3000GT i to drive full-range speakers, set the crossover mode switch to FLA T and skip to the next section, “Setting Input Sensitivity . ” 1. Depending on your system plan, set the A3000GT i’ s crossover mode switch to LP (low-pass) or HP (high- pass). ...

  • JBL A6000GTi - page 9

    9 SETTING UP THE GTi AMPLIFIER REPLACING THE FUSE OR NEON TUBES The JBL A6000/A3000GT i amplifier is equipped with an internal fuse, a 20-inch neon tube and two 6-inch neon tubes. Should the fuse or a neon tube fail, perform the following steps to replace the part: NOTE: For neon tube replacement, see your authorized JBL car audio dealer to purchas ...

  • JBL A6000GTi - page 10

    10 SETTING UP THE GTi AMPLIFIER 7. Using a T -15 screwdriver , remove the two T orx-head screws on the display board and set them aside (see Figure 16 below). Disconnect the ribbon cable from display board. 8. Using a T -15 screwdriver , remove the 16 T orx-head screws on the perforated shield and set them aside (see Figure 16). Figure 16. Removing ...

  • JBL A6000GTi - page 11

    11 TROUBLESHOOTING SYMPTOM LIKEL Y CAUSE SOLUTION No audio No voltage at power Check BA TT+, REMOTE and (Power LED is off) or remote terminal GND – terminals with VOM for blown fuse or poor connection Internal fuse blown Replace internal fuse (incorrect power (see Replacing the Fuse connections) or Neon T ubes section) No audio Low or high voltag ...

  • JBL A6000GTi - page 12

    JBL Consumer Products 250 Crossways Park Drive, Woodbury , NY 11797 USA © 2004 Harman International Industries, Incorporated JBL and Crown are registered trademarks of Harman International Industries, Incorporated. Part No. GTIAMPOM4/04 Features, specifications and appearance are subject to change without notice. www.jbl.com ...

Fabricant JBL Catégorie Car Amplifier

Les documents que nous recevons du fabricant de l'appareilJBL A6000GTi peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques JBL
- manuels d’utilisations A6000GTi
- fiches produit JBL
- dépliants
- ou étiquettes-énergie JBL A6000GTi
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation JBL A6000GTi.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation JBL A6000GTi, manuels d’entretien, brefs manuels ou manuels de l’utilisateur JBL A6000GTi. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit JBL A6000GTi.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil JBL A6000GTi, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser JBL A6000GTi par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs JBL A6000GTi.

Le manuel d’utilisation complet JBL, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel JBL A6000GTi - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières JBL A6000GTi, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lJBL A6000GTi qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil JBL A6000GTi - qui devraient nous aider dans les premières étapes lors de l'utilisation JBL A6000GTi
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de JBL A6000GTi
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service JBL A6000GTi dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de JBL A6000GTi?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec JBL A6000GTi, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec JBL A6000GTi il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)