Français dropdown-ico

Manuel d’utilisation Powerware BD

42 pages 0.67 mb
Télécharger

Aller à la page of 42

Summary
  • Powerware BD - page 1

    ConnectUPS Z WEB/SNMP Card User ’s Guide X and BD Models www.powerware.com ...

  • Powerware BD - page 2

    Class B EMC Statements FCC Part 15 NOTE This equipment h as been tested an d found t o comply with t he limits for a Class B digital device, purs uant to p art 15 of the FCC Ru les. Thes e limits are designed to provide reason able protection against harmful interference in a residential installation. This equipmen t generates, uses and can radiate ...

  • Powerware BD - page 3

    Requesting a Declaration of Conformity Units th at are labeled with a CE mark comply with the following harmon ized standards an d EU directives: Harmonized Standards: EN 50091-1-1 and EN 50091-2; IEC 950 Secon d Edition, Amendm ents A1, A2, A3 , and A4 EU Directives: 73/23/EEC, Council D irective on equipmen t designed for us e within cert ain vol ...

  • Powerware BD - page 4

    ...

  • Powerware BD - page 5

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com i T ABLE OF C ONTENTS 1 Introduction 1 ...................................... System Application 3 ............................................ 2 Installation 5 ....................................... ConnectUPS Web/SNMP Card Front Panels 6 ....................... ...

  • Powerware BD - page 6

    Table of Content s ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com ii Becoming a Superuser 22 ....................................... Turning the UPS On and Off 23 .................................... Forcing the UPS to Shut Down 23 .................................. Planning a Scheduled UPS Shutdown and Restar ...

  • Powerware BD - page 7

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 1 CHAPTER 1 I NTRODUCTION The ConnectUPS Z Web/SNMP Card is a network car d for your uninterruptible power system (UPS) that provides both SNMP and HTTP co mpatibilit y. You can install th e card in any Powerware UPS that has an X-Slot Z or a BestDock Z slot. The ...

  • Powerware BD - page 8

    Introdu ction ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 2 In addition, the ConnectUPS Web/SNMP Card has the following features: : Hot -swappable feature simplifies installation by allowing you to install the card safely without powering down the critical UPS load. : Configuration f rom serial port, Tel ne ...

  • Powerware BD - page 9

    Introdu ction ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 3 System Application The following di agram shows how the ConnectUPS Web/SNMP Card can be used in a network application. Ethernet Management Station o r Terminal RS-232 UPS ConnectUPS -X or ConnectUPS -BD NMS Station or Web Brows er Power Line NetWar ...

  • Powerware BD - page 10

    Introdu ction ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 4 ...

  • Powerware BD - page 11

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 5 CHAPTER 2 I NSTALLATION With the hot-swappable feature, the ConnectUPS Web/SNMP Card can be installed easil y without turning off the UPS or disconnecting the load. To install the ConnectUPS Web/SNMP Card, perform the following steps: 1. Verify that both DIP swi ...

  • Powerware BD - page 12

    Installation ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 6 ConnectUPS Web/SNMP Card Front Panels The card panel details are shown in Figure 2 and Figur e 3. 10 Mb Network LEDs ( yellow) DIP Switch Reset Button COM Port Off On 12 Additi onal Ethernet Connect ors 100 Mb Network LED s (green) Status LED ( yell ...

  • Powerware BD - page 13

    Installation ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 7 LED Description The functions of the ConnectUPS Web/SNMP Card are indicated by the Status and ei ther the 10 Mb or 100 Mb LEDs, as listed in Tab le 1. Table 1. LED Definitions Status LED 10 Mb or 100 Mb LED Card Function Des cription Flickering On/F ...

  • Powerware BD - page 14

    Installation ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 8 Configuring the Card Remotely You can configure the card remotely through a netw ork using a Web bro wser or Telne t utility. NOTE Security-related parameters and some hardware parameters cannot be configured from a Web browser, but can be changed f ...

  • Powerware BD - page 15

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 9 CHAPTER 3 L OCAL C ONFIGURATION Use the following procedure to access the card ’s configuration program through a serial port. Before You Start To use the configuration progr am for the card, you need: : The serial cable included with the card. : A terminal w ...

  • Powerware BD - page 16

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 10 3. Open your terminal emulation program such as HyperTerminal and select the appropr iate serial connection (such as COM1). The serial line s hould be set to 9600 baud , No parity, 8 data bits, 1 stop bit, and no flow control. 4. Verify that ...

  • Powerware BD - page 17

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 11 Configuring the Card To configure the card: 1. Type 1 to enter the Web/SNMP Card Settings screen (see Figure 6). +=================================================================== | [ ConnectUPS Web/SNMP Card Configuration Utility ] +===== ...

  • Powerware BD - page 18

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 12 3. Change any other options as needed for your particular configuration by typing the corresponding number shown in the menu ( 2 through 10 ). Each setting is described in the foll owing sections. 4. Type 0 to return to the Main Menu. 5. Typ ...

  • Powerware BD - page 19

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 13 +=================================================================== | [ ConnectUPS Web/SNMP Card Configuration Utility ] +=================================================================== 1. Set the IP Address, Gateway Address and MIB Sys ...

  • Powerware BD - page 20

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 14 Set the IP Address, Gateway Address and MIB System Group Use this function (option 1 ) to set the IP address, the gateway address, or t he management infor mation base (MIB) parameters of the card, as li sted in Table 2. Table 2. P arameters ...

  • Powerware BD - page 21

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 15 Set Write Access Managers For those users who intend to use an SNMP-compatible NMS to manage the ConnectUPS Web/SNMP Card, the IP address of the management station must be added to the list on the ConnectUPS Web/SNMP Card in order to r eceiv ...

  • Powerware BD - page 22

    Local Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 16 Set UPS Information Use this function to enter additional information about the UPS including date of installation and date of last battery replacement (option 7 ). In additi on, set timing values rel ating to the shutdown and restart of the ...

  • Powerware BD - page 23

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 17 CHAPTER 4 R EMOTE C ONFIGURATION Use the following procedure to access the card ’s configuration program through a Web browser. NOTE Verify that an active 10/100BaseT cable is c onnected to the card ’s network connector (the Uplink Ethernet connector on the ...

  • Powerware BD - page 24

    Remote Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 18 Running the Web Browser Locate a computer (PC, host, or server) that has a Web browser (Internet Explorer or Netscape recommended) and is connected to a network. 1. Run the Web browser and connect to the ConnectUPS Web/SNMP Card IP address ...

  • Powerware BD - page 25

    Remote Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 19 Setup Network Configuration 1. Select Configurati on from the menu at the top of the home page, then Web/SNMP Card Configurat ion to set the ConnectUPS Web/SNMP Card p arameters (see Figure 9) . 2. Click Become Super user and log in with th ...

  • Powerware BD - page 26

    Remote Configuration ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 20 3. Select and edit the ConnectUP S Web/SNMP Card IP Address . 4. Select and edit the Gat eway Addr ess for the network. 5. Select and edit the Subnet Mask of the network. 6. Select Set Values to save the new settings. NOTE If you changed th ...

  • Powerware BD - page 27

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 21 CHAPTER 5 UPS P OWER M ANAGEMENT You can manage the UPS from a Web browser or from an SNMP network management system. UPS M anagement from a Web Browser When using a Web browser to access the ConnectUPS Web/SNMP Card, the majority of UPS -related information is ...

  • Powerware BD - page 28

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 22 If you leave the browser pointed to this page, it automatically updates when new UPS information is available. To return to the UPS Status page, point and clic k the mouse pointer anywhere within the color ed background area. ConnectUPS Mu ...

  • Powerware BD - page 29

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 23 Turning the UPS On and Off The Connect UPS Web/SNMP Card suppo rts the abilit y to remotely turn off the UPS and its supported load. It al so supports the ability to reboot the UPS (cycling output power off and then back o n), as well as t ...

  • Powerware BD - page 30

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 24 6. To turn off the UPS and have it stay off (requiring local interaction to turn it back on), change Load Segment to Rest art foll owing the r eturn of AC Line to NO . If you want to effectively reboot the UPS and the associated load, then ...

  • Powerware BD - page 31

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 25 6. Then select Enable UPS Shutdow n Schedule , follo wed b y Set Values to star t the process. Any shutdow n/restart events repeat until you change the table or select Disable U PS Shutdown S chedule . NOTE Before scheduli ng any shutdowns ...

  • Powerware BD - page 32

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 26 page with yo ur bro wser. T his is especially helpful if you ha ve more than one ConnectUPS Web/SNMP Card and intend to receive e-mails at a central location. If your SMTP server requir es a qualified domain name instead of an IP address o ...

  • Powerware BD - page 33

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 27 Performing a Manual UPS Battery Test You can use the ConnectUPS Web/SNMP Card to manually perfor m a UPS bat tery test. T he ability to t est the UPS is model dependent (consult your UPS documentati on for more information). 1. To manually ...

  • Powerware BD - page 34

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 28 2. The xups.mib and stdupsv1.mib files (on t he supplied CD-ROM) contain the MIB for the ConnectUPS Web/SNMP Card. Add these files to the MIB database of your SNMP management software (such as HP OpenView Z IBM Director, and Sun NetManager ...

  • Powerware BD - page 35

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 29 Automatic Shutdown of U PS-Protected Com puters NetWatch client software su pports remote UPS monitoring and automatic shutdown of UPS -protected computer systems and is available on th e supplied CD-ROM o r from www.powerware.c om. Client ...

  • Powerware BD - page 36

    UPS Power Ma nagement ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 30 ...

  • Powerware BD - page 37

    ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 31 A PPENDIX The appendix contains the card specifications, DIP switch and jumper settings, upgrading t he firmware, service and suppor t, and the warranty. Table 3. Technical Specifications CPU AC1101 Memory 1024k  8 S tatic DRAM 1024k  8F l a s hR O M LAN ...

  • Powerware BD - page 38

    Appendix ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 32 DIP Switch Description DIP switch defi nitions for both ty pes of the ConnectUPS Web/SNMP Cards are list ed in Table 4. Table 4. DI P Swi tch Modes SW1 SW2 Description Off Off Operati onal Mode (defaul t) Off On BOOTP/D HCP Enabl e Mode (overrides t he ...

  • Powerware BD - page 39

    Appendix ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 33 Upgrading the Card Firmware During the upgrade process, the ConnectUPS Web/SNMP Card is inaccessible, but restart s automatically within a minute after completing the up grade. To upgrade the ConnectUPS-X or ConnectUPS-BD firmware, use the following st ...

  • Powerware BD - page 40

    Appendix ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 34 6. Highlight the ConnectUPS Web/ SNMP Card IP address to select the individual card. Click Modify and enter the Superu ser name and passwor d. Repeat this step for each card that will be upgraded. 7. Select Open next to Fil ename and select the binary ...

  • Powerware BD - page 41

    Appendix ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 35 If repair is req uired, you w ill be given a Retur ned Material Authorization (RMA) Number. This number must appear on t h eo u t s i d eo ft h ep a c k a g ea n do nt h eB i l lO fL a d i n g( i f applicable). Use the original packaging or r equest pa ...

  • Powerware BD - page 42

    Appendix ConnectUPS Web/SNMP Card (X and BD Models) U ser ’s Guide : Rev A www.powerware.com 36 Extended Service Coverage A full complement of warranty exten sions and enhan cements are available from Powerware Corporation for your UP S. Information p ertaining to th ese services should be av ailable in the shipping contain er along with this man ...

Fabricant Powerware Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilPowerware BD peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Powerware
- manuels d’utilisations BD
- fiches produit Powerware
- dépliants
- ou étiquettes-énergie Powerware BD
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Powerware BD.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Powerware BD, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Powerware BD. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Powerware BD.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Powerware BD, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Powerware BD par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Powerware BD.

Le manuel d’utilisation complet Powerware, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Powerware BD - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Powerware BD, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPowerware BD qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Powerware BD - qui devraient nous aider dans les premières étapes lors de l'utilisation Powerware BD
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Powerware BD
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Powerware BD dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Powerware BD?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Powerware BD, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Powerware BD il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)