Français dropdown-ico

Manuel d’utilisation Brother XL5010

82 pages 1.46 mb
Télécharger

Aller à la page of 82

Summary
  • Brother XL5010 - page 1

    Instruction Manual Manual de instrucciones Manuale d’istruzione ...

  • Brother XL5010 - page 2

    “IMPOR T ANT SAFETY INSTR UCTIONS” When using the sewing machine, basic safety precautions should always be followed, including the following: “Read all instructions before using. ” D ANGER – T o reduce the risk of electric shock: 1. The sewing machine should ne v er be left unattended when plugged in. Alwa ys unplug this sewing machine f ...

  • Brother XL5010 - page 3

    “IMPOR T ANTES INSTR UCCIONES DE SEGURID AD” Cuando se usa una máquina de coser , debe seguirse unas precauciones básicas y que se detallan a continuación. “Leer todas las instrucciones antes de usarla” PELIGR O – P ara reducir el riesgo de una descarga eléctrica. 1. La máquina no debe dejarse nunca desatendida mientras esté conecta ...

  • Brother XL5010 - page 4

    “IMPOR T ANTI ISTR UZIONI DI SICUREZZA” Quando usate la macchina per cucire, rispettate sempre le precauzioni di sicurezza, incluso quanto qui di seguito specificato . “Leggete tutte le istruzioni prima dell’uso. ” PERICOLO – P er ridurre il r ischio di shock elettrico . 1. La macchina per cucire non de ve essere mai lasciata abbandonat ...

  • Brother XL5010 - page 5

    IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in the plug. NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is hazardous if engage ...

  • Brother XL5010 - page 6

    CONTENTS BUTTONHOLE AND BUTTON SEWING Making a Buttonhole (XL5030 and XL5020 only) .... 47 Making a Buttonhole (XL5010 only) ........................ 49 Buttonhole Fine Adjustment .................................... 52 Button Sewing ......................................................... 54 USING A TT ACHMENTS AND APPLICA TIONS Zipper Inserting ...

  • Brother XL5010 - page 7

    ÍNDICE DEL CONTENIDO CONOZCA SU MÁQUINA DE COSER ELEMENT OS PRINCIP ALES ............................................ 2 A CCESORIOS ................................................................... 3 FUNCIONAMIENT O DE LA MÁQUINA DE COSER ......... 5 Cone xión de los enchufes ........................................ 5 Interruptor pr incipal y ...

  • Brother XL5010 - page 8

    SOMMARIO CONOSCERE LA MA CCHINA D A CUCIRE P ARTI PRINCIP ALI ................................................................. 2 A CCESSORI .............................................................................. 3 FUNZIONAMENT O DELLA MA CCHINA D A CUCIRE ... 5 Collegamento elettrico ....................................................... 5 ...

  • Brother XL5010 - page 9

    1 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX PRINCIP AL P ARTS 1 Bobbin winding assembly W inds the thread onto the bobbin to be used for the lower thread. 2 Spool pin Holds the spool of thread. 3 Bobbin winding te ...

  • Brother XL5010 - page 10

    2 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ELEMENT OS PRINCIP ALES 1 P or ta bobinas Hace bobina para la canilla que v a a ser utilizada como hilo inf e- rior . 2 P or ta carretes Sopor ta el carrete del hilo 3 G ...

  • Brother XL5010 - page 11

    3 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ACCESSORIES XL5030/5020 1 Buttonhole foot (1 pc.) 2 Zipper foot (1 pc.) 3 Button sewing foot (1 pc.) 4 Needle pack (regular single needle HA × 130) (3 pcs.) 5 T win nee ...

  • Brother XL5010 - page 12

    4 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 1 Buttonhole foot (1 pc.) 2 Zipper foot (1 pc.) 3 Button sewing foot (1 pc.) 4 Needle pack (regular single needle HA × 130) (3 pcs.) 5 T win needle (1pc.) 6 Bobb ...

  • Brother XL5010 - page 13

    5 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX OPERA TING YOUR SEWING MACHINE Connecting Plugs 1. Insert the foot controller plug, located between the foot controller and the power supply plug on the cord, into the j ...

  • Brother XL5010 - page 14

    6 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX 1 2 Main Power and Sewing Light Switches This switch turns the main power and sewing light on or off. (See fig. A .) 1 T urn on (toward the “I” mark) 2 T urn off (to ...

  • Brother XL5010 - page 15

    7 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Inserting the Needle T urn power switch to “O”. 1. Remove the power supply plug from the electrical outlet. 2. Raise the needle bar to its highest position. 3. Lower ...

  • Brother XL5010 - page 16

    8 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Changing the Presser Foot It may be necessary to change the presser foot according to your sew- ing needs. SNAP-ON TYPE T urn power switch to “O”. 1. Raise the needl ...

  • Brother XL5010 - page 17

    9 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Converting to Free-Arm Style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas on garments. T o change your machine to the free-arm style, lift up ...

  • Brother XL5010 - page 18

    10 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX V ARIOUS CONTROLS Pattern Selection Dial T o select a stitch, simply turn the pattern selection dial in either direc- tion. Stitch widths and lengths are shown on the f ...

  • Brother XL5010 - page 19

    11 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX RECOMMENDED WIDTHS AND LENGTHS FOR STITCHES XL5030 PA TTERN STITCH NAME PRESET WIDTH RECOMMENDED PAGE IN [mm (inch)] LENGTH INSTRUCTIONS [mm (inch)] 1 BUTT ONHOLE 5 -1. ...

  • Brother XL5010 - page 20

    12 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5020 PA TTERN STITCH NAME PRESET WIDTH RECOMMENDED PAGE IN [mm (inch)] LENGTH INSTRUCTIONS [mm (inch)] 1 BUTT ONHOLE 5 -1.5 47 (13/64) (1/64-1/16) 2 STRAIGHT STITCH ? ...

  • Brother XL5010 - page 21

    13 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 PA TTERN STITCH NAME PRESET WIDTH RECOMMENDED PAGE IN [mm (inch)] LENGTH INSTRUCTIONS [mm (inch)] 1 (A-B-C-D) BUTTONHOLE 5 -1.5 49 (13/64) (1/64-1/16) 2 ZIGZAG S ...

  • Brother XL5010 - page 22

    14 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ANCHOS Y LARGOS DE PUNT AD AS RECOMEND ADOS XL5030 PUNT AD A NOMBRE ANCHO LARGO PÁGINA DEL PREAJUST ADO RECOMEND ADO MANU AL [mm (pulgadas)] [mm (pulgadas)] 1O J A L 5 ...

  • Brother XL5010 - page 23

    15 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5020 PUNT AD A NOMBRE ANCHO LARGO PÁGINA DEL PREAJUST ADO RECOMEND ADO MANU AL [mm (pulgadas)] [mm (pulgadas)] 1O J A L 5 -1,5 48 (13/64) (1/64-1/16) 2 PUNT AD A REC ...

  • Brother XL5010 - page 24

    16 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 PUNT AD A NOMBRE ANCHO LARGO PÁGINA DEL PREAJUST ADO RECOMEND ADO MANU AL [mm (pulgadas)] [mm (pulgadas)] 1 (A-B-C-D) OJAL 5 -1,5 49 (13/64) (1/64-1/16) 2 PUNT ...

  • Brother XL5010 - page 25

    17 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX AMPIEZZE E LUNGHEZZE DEI PUNTI CONSIGLIA TE XL5030 PUNTO NOME PUNTO LARGHEZZA LUNGHEZZA P A GINA DEL PREFISSA T A CONSIGLIA T A MANU ALE [mm] [mm] 1 ASOLA 5 -1,5 48 (13 ...

  • Brother XL5010 - page 26

    18 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5020 PUNTO NOME PUNTO LARGHEZZA LUNGHEZZA P A GINA DEL PREFISSA T A CONSIGLIA T A MANU ALE [mm] [mm] 1 ASOLA 5 -1,5 48 (13/64) (1/64-1/16) 2 PUNTO DIRITT O – -4 36 ...

  • Brother XL5010 - page 27

    19 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX XL5010 PUNTO NOME PUNTO LARGHEZZA LUNGHEZZA P A GINA DEL PREFISSA T A CONSIGLIA T A MANU ALE [mm] [mm] 1 (A-B-C-D) ASOLA 5 -1,5 49 (13/64) (1/64-1/16) 2 PUNTO ZIGZA G 1 ...

  • Brother XL5010 - page 28

    20 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Stitch Length Dial Depending on your selected stitch, you may need to adjust the stitch length for best results. The numbers marked on the stitch length dial represent ...

  • Brother XL5010 - page 29

    21 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Stretch Stitching Selecting a stretch stitch Setting the stitch length dial to “ SS ” changes the selected pattern to a stretch stitch. (See fig. A. ) Adjusting the ...

  • Brother XL5010 - page 30

    22 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Reverse Sewing Lever T o sew in reverse, press down the reverse sewing lever as far as possi- ble and hold it in that position while lightly stepping on the foot con- t ...

  • Brother XL5010 - page 31

    23 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX THREADING THE MACHINE W inding the Bobbin 1. Place the spool of thread on the spool pin and pass the thread around the bobbin winding tension disc. 1 Bobbin winding ten ...

  • Brother XL5010 - page 32

    24 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Lower Threading T urn power switch to “O”. 1. Raise the needle to its highest position by turning the balance wheel toward you (counterclockwise) and raise the pres ...

  • Brother XL5010 - page 33

    25 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX 2 4 1 3 Upper (Needle) Threading T urn power switch to “O”. 1. Raise the presser foot lever and turn the balance wheel toward you (counterclockwise) to raise the th ...

  • Brother XL5010 - page 34

    26 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A 2 4 3 1 2 4 1 3 6 E D BC 5 5 Enhebrado superior (de la aguja) Desenchuf ar la máquina, interruptor principale a “O”. 1 . Lev ante la palanca del prensatelas y gi ...

  • Brother XL5010 - page 35

    27 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Using the Needle Threader (when the machine is equipped with a needle threader) T urn power switch to “O”. 1. Lower the presser foot lever . 2. T urn the balance wh ...

  • Brother XL5010 - page 36

    28 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX 1 2 3 5 4 2 1 6 6 7 Uso del enhebrador (cuando la máquina está equipada con una enhebradora de hilo) Desenchuf ar la máquina, interruptor principale a “O”. 1. Ba ...

  • Brother XL5010 - page 37

    29 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Quick Thread-setting System F AST ST ART BOBBIN (when the machine is equipped with a quick thread-setting system) This new system allows you to start sewing immediately ...

  • Brother XL5010 - page 38

    30 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Drawing Up Lower Thread 1. Raise the presser foot and the needle to their highest positions. 2. With your left hand, hold the end of the upper thread. W ith your right ...

  • Brother XL5010 - page 39

    31 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T win-Needle Sewing Y our sewing machine is designed for twin-needle sewing, which al- lows you to sew using two upper threads. Y ou can use the same color or two diffe ...

  • Brother XL5010 - page 40

    32 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Thread T ension Thread tension will affect the quality of your stitches. It may need to be adjusted when you change fabric or thread type. NOTE: It is recommended that ...

  • Brother XL5010 - page 41

    33 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T ensión de los hilos La tensión de los hilos es muy importante para la calidad de las puntadas y puede requerir un ajuste al cambiar de tejido o de hilo . NO T A: Le ...

  • Brother XL5010 - page 42

    34 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX CHART OF SEWING F ABRICS, NEEDLES AND THREAD COMBINA TIONS SEWING FABRICS NEEDLE SIZES THREAD SIZES Cotton: 80 Synthetic Fine Mercerized Cotton Cotton: 60~80 Silk: “A ...

  • Brother XL5010 - page 43

    35 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Cotone: 80 Filato sintetico Filato f ine mercerizzato Cotone: 60~80 Seta: “ A” Filato sintetico Filato mercerizzato 50 Cotone: 50~60 Seta: “ A” Filato sintetico ...

  • Brother XL5010 - page 44

    36 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Straight Stitching XL5030 XL5020 XL5010 Pattern Stitch Length 2 2 5 Straight Stitch (Center needle position) 1-4 3 3 6 Straight Stitch (Left needle position) 12 10 13 T ...

  • Brother XL5010 - page 45

    37 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Changing Sewing Directions (fig. A) 1. Stop the machine at the point where you wish to change directions with the needle still in the fabric. 2. Raise the presser foot ...

  • Brother XL5010 - page 46

    38 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Removing the Material From the Machine 1. Stop the machine. 2. Raise the needle to its highest position and make sure that the thread take-up lever is also in its highe ...

  • Brother XL5010 - page 47

    39 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Zigzag Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth 4 4 2 Zigzag Stitch Fixed 1.7 5 5 3 Zigzag Stitch -4 Fixed 3.5 6 6 4 Zigzag Stitch Fixed 5 ZIG ...

  • Brother XL5010 - page 48

    40 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A B C D Blind Hem Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 7 7 – Blind Hem Stitch -2 Fixed 5 10 – 7 Stretch Blind Stitch -1.5 Fixed 3.5 The ...

  • Brother XL5010 - page 49

    41 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Shell T uck Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 8 8 8 Shell T uck Stitch -3 Fixed 5 The Shell T uck Stitch can be used to sew a picot (lac ...

  • Brother XL5010 - page 50

    42 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Elastic Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 9 9 9 Elastic Stitch -2.5 Fixed 5 The Elastic Stitch can be used in three different ways: to m ...

  • Brother XL5010 - page 51

    43 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Scallop Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 1 1 – – Scallop Stitch -1.5 Fixed 5 This machine automatically produces a Scallop Stitch w ...

  • Brother XL5010 - page 52

    44 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Overedge Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 17 15 – Stretch Overlock Stitch Fixed 3 18 16 16 Elastic Overlock Stitch Fixed 2.5 20 – 1 ...

  • Brother XL5010 - page 53

    45 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Feather Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch Width 19 17 17 Feather Stitch Fixed 2.5 Fixed 5 Use the Feather Stitch as a decorative top stitch or ...

  • Brother XL5010 - page 54

    46 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T riple Zigzag Stretch Stitching XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth 14 12 10 T riple Zigzag Stretch Stitch Fixed 1.7 15 13 1 1 T riple Zigzag Stre ...

  • Brother XL5010 - page 55

    47 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Making a Buttonhole (XL5030 and XL5020 only) XL5030 XL5020 Pattern Stitch Length Stitch Width Foot 11 Buttonhole -1.5 Fixed 5 Buttonhole Foot NOTE: 1. It is recommended ...

  • Brother XL5010 - page 56

    48 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX – 1 3 2 4 1 3 24 PUSH PUSH PUSH A E CD B P ara coser ojales (Solo XL5030 y XL5020) XL5030 XL5020 Número de puntada Largo de puntada Ancho de puntada Prensatelas 1 1 ...

  • Brother XL5010 - page 57

    49 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Making a Buttonhole (XL5010 only) XL5010 Pattern Stitch Length Stitch Width Foot 1(A-B-C-D) Buttonhole -1.5 Fixed 5 Buttonhole Foot NOTE: 1. It is recommended to practi ...

  • Brother XL5010 - page 58

    50 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Step 2 (Left side) Step 4 (Right side) MAKING A BUTTONHOLE Step Sewn Portion Pattern How to Sew 1. Set the pattern selection dial to “A”. 2. Lower the presser foot ...

  • Brother XL5010 - page 59

    51 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A A/C A C B A/C A C D B C D Securing the Stitching and Cutting the Buttonhole 1. T o secure the stitching, turn the material 90 ° counterclockwise and sew straight sti ...

  • Brother XL5010 - page 60

    52 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Buttonhole Fine Adjustment If the stitching on the two sides of the buttonhole do not appear iden- tical, the following adjustments can be made. 1. Set the Stitch Lengt ...

  • Brother XL5010 - page 61

    53 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Ajuste fino de los ojales Si las puntadas en ambos lados del ojal no parecen ser idénticas , se pueden hacer los siguientes ajustes. 1. Ponga el selector de puntadas e ...

  • Brother XL5010 - page 62

    54 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Button Sewing XL5030 XL5020 XL5010 Pattern Stitch Length Foot 4, 5, 6 4, 5, 6 2, 3, 4 Zigzag Stitch Any Button Sewing Foot 1. Measure the distance between the holes and ...

  • Brother XL5010 - page 63

    55 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Costura de botones XL5030 XL5020 XL5010 Número de puntada Largo de puntada Prensatelas 4, 5, 6 4, 5, 6 2, 3, 4 Puntada zigzag Cualquiera Prensatelas para botones 1. Mi ...

  • Brother XL5010 - page 64

    56 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Zipper Inserting XL5030 XL5020 XL5010 Pattern Stitch Length Foot 2 2 5 Straight Stitch 2-3 Zipper Foot The zipper foot is used to sew various types of zippers and can e ...

  • Brother XL5010 - page 65

    57 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Inserción de cremalleras XL5030 XL5020 XL5010 Número de puntada Largo de puntada Prensatelas 2 2 5 Puntada recta 2-3 P ata de cremallera La pata de cremallera sirve p ...

  • Brother XL5010 - page 66

    58 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX A B Darning XL5030 XL5020 XL5010 Pattern Stitch Length 1 1 5 Straight Stitch Any 1. Place the darning plate on the needle plate as shown in fig. A . 1’. Lower the fee ...

  • Brother XL5010 - page 67

    59 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Appliques XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth 4 4 2 Zigzag Stitch Fixed 1.7 5 5 3 Zigzag Stitch -2 Fixed 3.5 6 6 4 Zigzag Stitch Fixed 5 An appliqu ...

  • Brother XL5010 - page 68

    60 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Monogramming and Embroidering XL5030 XL5020 XL5010 Pattern Stitch Length Stitch W idth Foot 4 4 2 Zigzag Stitch Fixed 1.7 5 5 3 Zigzag Stitch -2 Fixed 3.5 None 6 6 4 Zi ...

  • Brother XL5010 - page 69

    61 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Monogramming 1. Sew moving the hoop slowly along the lettering at a constant speed. 2. Secure with a few straight stitches at the end of the last letter . Embroidering ...

  • Brother XL5010 - page 70

    62 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Changing the Bulb 1. Remove the power supply plug from the outlet. 2. Loosen the face plate screw as shown in fig. A . 3. Remove the face plate from the machine as illu ...

  • Brother XL5010 - page 71

    63 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Oiling 1. Remove the power supply plug from the outlet. 2. Remove the needle plate and the face plate. 3. Put 2 to 3 drops of oil at each point indicated by the arrows. ...

  • Brother XL5010 - page 72

    64 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Cleaning Removing the Shuttle Hook 1. Raise the needle to its highest position and remove the power sup- ply plug from the outlet. 2. Remove the extension table and ope ...

  • Brother XL5010 - page 73

    65 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Performance Checklist Whenever sewing difficulties are encountered, review the section in this instruction manual that details the operation you are performing to make ...

  • Brother XL5010 - page 74

    66 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Page 34 Page 7 Page 25 No Page 20 No Page 7 No No Page 5 No No No Page 7 No Page ...

  • Brother XL5010 - page 75

    67 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Listado de posibles incidencias Cada v ez que se encuentre con dificultades al coser , vuelva a consultar la parte de este manual de instrucciones que detalla la operac ...

  • Brother XL5010 - page 76

    68 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Página 34 Página 7 Página 26 No Página 20 No Página 7 No No Página 5 No No ...

  • Brother XL5010 - page 77

    69 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX T abella di controllo del funzionamento Ogni qualvolta si incontrano delle dif ficoltà nell’esecuzione del lav or o, ri vedere la sezione del libretto di istruzioni ...

  • Brother XL5010 - page 78

    70 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Pagina 35 Pagina 7 Pagina 26 No Pagina 20 No Pagina 7 No No Pagina 5 No Pagina 7 Pag ...

  • Brother XL5010 - page 79

    71 CONTENTS KNO WING Y OUR SEWING MA CHINE STRAIGHT AND ZIGZA G STITCHING BUIL T -IN STITCHES BUTT ONHOLE AND BUTT ON SEWING USING A TT A CHMENTS AND APPLICA TIONS MAINTENANCE INDEX Repacking the Machine Keep the carton and packing materials for future use. It may become necessary to reship the sewing machine. Improper packing or improper packing m ...

  • Brother XL5010 - page 80

    72 Page A Accessories ......................................................................... 3 Appliques .......................................................................... 59 B Balancing the Machine ..................................................... 10 Blindhem Stitching ............................................................ 40 ...

  • Brother XL5010 - page 81

    73 Página A Accesorios ......................................................................... 3 Aguja Cambio ..................................................................... 7 Enhebrado .............................................................. 26 Enhebrador ............................................................. 28 V erificació ...

  • Brother XL5010 - page 82

    74 Pagina A Accessori ...................................................................................... 3 Ago Controllo ............................................................................ 7 Inf ilatore ........................................................................... 28 Inf ilatura ........................................... ...

Fabricant Brother Catégorie Sewing Machine

Les documents que nous recevons du fabricant de l'appareilBrother XL5010 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Brother
- manuels d’utilisations XL5010
- fiches produit Brother
- dépliants
- ou étiquettes-énergie Brother XL5010
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Brother XL5010.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Brother XL5010, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Brother XL5010. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Brother XL5010.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Brother XL5010, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Brother XL5010 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Brother XL5010.

Le manuel d’utilisation complet Brother, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Brother XL5010 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Brother XL5010, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBrother XL5010 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Brother XL5010 - qui devraient nous aider dans les premières étapes lors de l'utilisation Brother XL5010
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Brother XL5010
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Brother XL5010 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Brother XL5010?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Brother XL5010, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Brother XL5010 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)