Français dropdown-ico

Manuel d’utilisation Patton electronic 2120

84 pages 0.85 mb
Télécharger

Aller à la page of 84

Summary
  • Patton electronic 2120 - page 1

    USER MANUAL MODEL 2120 RS-232 Single P or t T erminal Server SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2120-UM Doc# 08302U2-001, Rev . D Revised 10/27/06 An ISO-9001 Certified Company ...

  • Patton electronic 2120 - page 2

    2 T ABLE OF CONTENTS 1.0 Warranty Information ................................................................. 5 1.1 FCC Information ........................................................................... 5 1.2 CE Notice ...................................................................................... 6 1.3 Service ....................... ...

  • Patton electronic 2120 - page 3

    3 Modifying A User ........................................................................ 41 3.8 IP Addressing ............................................................................. 42 Unit IP Address........................................................................... 42 Serial Interface IP Address .................................. ...

  • Patton electronic 2120 - page 4

    4 A.11 Power Supply Options ................................................................ 57 A.12 Temperature ............................................................................... 58 A.13 Altitude ........................................................................................ 58 A.14 Humidity .................................. ...

  • Patton electronic 2120 - page 5

    5 1.0 W ARRANTY INFORMATION P atton Electronics warrants all Model 2120 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of shipment. This warranty is limited to def ects in w orkmanship or mater ials, and does not cov er customer damage, ab use or una ...

  • Patton electronic 2120 - page 6

    6 1.2 CE NOTICE The CE symbol on your P atton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low V oltage Directive (L VD) of the European Union (EU). A Cer- tificate of Compliance is av ailable by contacting T echnical Suppor t. Note THIS DEVICE IS NO T INTENDED T O BE CONNE ...

  • Patton electronic 2120 - page 7

    7 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly tested and is warranted f or One Y ear par ts and labor . If any questions or prob lems arise during installation or use of this product, please do not hesitate to contact P atton Electronics T ech- nical Support at (301) 975 ...

  • Patton electronic 2120 - page 8

    8 • Selectable RS-232 char acter length options of 5, 6, 7, 8 • Selectable RS-232 flo w control options of none, hardware, xonxoff • Selectable RS-232 parity options of none, odd, e ven, high • Selectable RS-232 stop length options of 1, 2 • Selectable RS-232 interf ace protocol options of T elnet, Raw-TCP , SLIP , and PPP • Ability to ...

  • Patton electronic 2120 - page 9

    9 • DHCP: – DHCP enable/disab le for static or dynamic IP addressing of the unit – P er mit the use of the DHCP off ered IP address in the IP address destination field – DHCP Client suppor t f or Default Gatew ay IP Forwarding/NA T • Ability to f orward IP pac kets from multiple Ethernet devices across its serial interface in both SLIP a ...

  • Patton electronic 2120 - page 10

    10 System Features • Ability to displa y boot message on the serial interface • Selectable def ault gatewa y IP address f or use when the destination IP address cannot be f ound • DHCP enable/disab le for static or dynamic IP addressing of the unit • Selectable unit IP address • Ability to change f actor y assigned unit MA C Address, MA C ...

  • Patton electronic 2120 - page 11

    11 • Ability to reset non-volatile configur ation parameters • Ability to remotely close the serial interface connection • Ability to FTP to a remote de vice • Ability to Ping to a remote de vice • Ability to Raw-TCP to a remote de vice • Ability to T elnet to a remote device • Ability to download softw are using FTP and write/activa ...

  • Patton electronic 2120 - page 12

    12 2.3 DESCRIPTION The Model 2120 Single P or t T er minal Ser v er (see Figure 1) provides a quick, easy to use solution f or connecting traditional RS-232 terminals and de vices to the Local Ethernet/IP Networ k. The Model 2120 can also function as a very cost effectiv e single por t remote access ser v er . Serial asynchronous de vice connectivi ...

  • Patton electronic 2120 - page 13

    13 The Model 2120 is initially configured via the serial interface using a dumb terminal or ter minal emulation software in VT -100 mode. The serial interf ace f actor y def ault asynchronous setting is 9600 bits/second, 8 bits per character , no par ity , and 1 stop bit. All configuration parameters can be set via the serial interface using the ...

  • Patton electronic 2120 - page 14

    14 SLIP operation provides a de vice connected to the Model 2120 serial interf ace with LAN connectivity . The Model 2120 and the device con- nected to the serial interface e xchange IP packets where each IP pac ket is SLIP encapsulated. The Model 2120 uses pro xy ARP to provide the de vice connected to the serial interface with a virtual Ether net ...

  • Patton electronic 2120 - page 15

    15 3.0 CONFIGURATION 3.1 CONFIGURATION SWITCHES SW1 is a set of f our inter nal DIP s witches (see Figure 2) that are used f or configuration reset purposes only . T o access s witch set SW1, use a small flat blade scre wdr iv er to open the Model 2120’s case as sho wn in Figure 3. Figure 2. Switch set SW1 location Figure 3. Opening the Model 2 ...

  • Patton electronic 2120 - page 16

    16 Default Settings Def ault settings f or the DIP switches are as f ollows: Detailed Switch Settings This section provides detailed inf ormation about the function of each DIP s witch and lists all possible settings . • Switch 1: Configuration Reset. Set this switch to the ON position and power cycle the unit to reset to the f actor y def ault ...

  • Patton electronic 2120 - page 17

    17 management enable command is f actor y set to yes , which allows the remote configuration of the Model 2120 ov er the LAN. Model 2120 Software Command System The Model 2120 Software Command System is designed with a series of help menus and commands derived from the actual function descrip- tions. Once a session has been established with the 21 ...

  • Patton electronic 2120 - page 18

    18 Figure 5. Model 2120 Help Menu/Command Hierarch y ...

  • Patton electronic 2120 - page 19

    19 Entering Commands Commands are e x ecuted by typing the appropriate command or com- mands at the system prompt (TS>) f ollo w ed b y a v alid entr y (if applicable) and the <Enter> ke y . If entering multiple commands, the y must be entered in hierarch y order (See “Model 2120 Help Menu/Command Hierarch y” on page 17) and separated ...

  • Patton electronic 2120 - page 20

    20 3.3 DEFAULT CONFIGURATION PARAMETERS The Model 2120 software is pre-configured with the f ollowing f actor y def ault settings. EIA232 Interface Defaults • Character Length: 8 (bits) • Datarate: 9600 (bits per second) • DTE/DCE Ph ysical P or t: DCE • Flow Control: none • Inactive Timeout: 15 (minutes) • Serial Interface IP Address: ...

  • Patton electronic 2120 - page 21

    21 • Connection Retr y F requency: 0 (seconds) • Local P or t: 404 • Remote IP Address: 1.1.1.8 • Remote P or t: 23 • Remote P assword: UNDEFINED (no entr y) • Remote User ID: UNDEFINED (no entr y) • Session T er mination Character: 0x04 (Control-D) System Defaults • Boot Message Displa y Enable: yes • Def ault Gatew ay IP Address ...

  • Patton electronic 2120 - page 22

    22 1. V erify that the four internal DIP switches are set to the OFF position (f actor y def ault). 2. Using ribbon cable or other similar cab le , connect the serial RS-232 por t of a VT -100 ASCII terminal or similar DTE with ter minal emula- tion software to the RS-232 port of the Model 2120. 3. P ower up the emulation de vice and configure its ...

  • Patton electronic 2120 - page 23

    23 7. Bef ore proceeding with the configur ation of the Model 2120 for y our application, it is suggested that the f ollowing "sho w all" commands be e x ecuted in order to view the current system, eia232, and user database configuration parameters: TS>show system all<Enter> (or "s s a<Enter>") Boot Message Disp ...

  • Patton electronic 2120 - page 24

    24 TS>show eia232 ppp all<Enter> (or "s e p a<Enter>) DHCP Enable : no DHCP State : initialize DHCP Passed Lease Time (sec) : 0 DHCP Renew Lease Time (sec) : 0 DHCP Rebind Lease Time (sec) : 0 DHCP Expire Lease Time (sec) : 0 DHCP IP Address : 0.0.0.0 DHCP Subnet Mask : 0.0.0.0 DHCP Default Gateway : 0.0.0.0 DHCP Hardware Addres ...

  • Patton electronic 2120 - page 25

    25 8. Y ou are now ready to configure the Model 2120 f or your application. Configuration parameters will v ar y based upon the requirements of each application. F or a detailed definition of all 2120 system commands, v alid entries, and def aults see Appendix B on page 59. Note Contact your Network Administrator if y ou have questions regarding ...

  • Patton electronic 2120 - page 26

    26 F or a detailed definition of all 2120 system commands, v alid entries, and def aults see Appendix B on page 59. Note Contact your Network Administrator if y ou have questions regarding configuration parameters required f or y our application and/or LAN. 3.6 SAMPLE 2120 CONFIGURATIONS The Model 2120 f eatures and functionality allow it to oper ...

  • Patton electronic 2120 - page 27

    27 Figure 6. T elnet / TCP Operation System Settings Boot Message Displa y Enable: yes Def ault Gatew ay IP Address: <IP Address of Default Gatewa y of 2120 LAN> DHCP Enable: no IP Address Configured: <IP Address Assigned by Netw ork Admin> MA C Address: <Factory Assigned> Management Enable: yes (or preferred) Management Inactive ...

  • Patton electronic 2120 - page 28

    28 EIA232 Interface Settings Character Length: 8 (or setting required by serial device) Datarate: 9600 (or setting required by serial device) DTE / DCE Ph ysical P or t: dce (or setting required by serial device) Flow Control: none (or setting required by serial de vice) Inactive Timeout (min): 15 (or pref erred) IP Address Configured: <Same as ...

  • Patton electronic 2120 - page 29

    29 Remote P or t: 23 Remote P assword: (UNDEFINED) Remote User ID: (UNDEFINED) Session T er mination Character: 0x04 (or pref erred) User Database Settings user database empty! (or add users and corresponding pass words and privileges) RawTCP Operation In the typical RawTCP application (see Figure 7), the user has a need to connect a network enable ...

  • Patton electronic 2120 - page 30

    30 Figure 7. Raw - TCP Oper ation System Settings Boot Message Displa y Enable: yes Def ault Gatew ay IP Address: <IP Address of Default Gatewa y of 2120 LAN> DHCP Enable: no IP Address Configured: <IP Address Assigned by Netw ork Admin> MA C Address: <Factory Assigned> Management Enable: ye s (or pref erred) Management Inactive ...

  • Patton electronic 2120 - page 31

    31 EIA232 Interface Settings Character Length: 8 (or setting required by serial device) Datarate: 9600 (or setting required by serial device) DTE / DCE Ph ysical P or t: dce (or setting required by serial device) Flow Control: none (or setting required by serial device) Inactive Timeout (min): 0 IP Address Configured: <Same as System IP Address ...

  • Patton electronic 2120 - page 32

    32 Remote IP Address: <IP Address of Software App. Host> Remote P or t: <TCP Port Number of Software App. Host> Remote P assword: UNDEFINED (or required setting) Remote User ID: UNDEFINED (or required setting) Session T er mination Character: 0x04 (or pref erred) User Database Settings user database empty! (or add users and correspondin ...

  • Patton electronic 2120 - page 33

    33 Figure 8. PPP T er minal Server System Settings Boot Message Displa y Enable: no Def ault Gatew ay IP Address: <IP Address of Default Gatewa y of 2120 LAN> DHCP Enable: no IP Address Configured: <IP Address Assigned by Netw ork Admin> ...

  • Patton electronic 2120 - page 34

    34 MA C Address: <Factory Assigned> Management Enable: ye s (or pref erred) Management Inactive Timeout (min): 15 (or preferred) Prompt: TS> (or preferred) Subnet Mask Configured: <Subnet Mask of 2120 LAN> EIA232 Interface Settings Character Length: 8 (or setting required by modem) Datarate: 115200 (or setting required by modem) DTE ...

  • Patton electronic 2120 - page 35

    35 User A uthentication Protocol: pap EIA232 Raw-TCP/T elnet Settings Connection F rom Local Enable: no Connection F rom Remote Enable: yes Connection Retr y F requency (sec): 0 Local P or t: 404 (or required setting) Remote IP Address: 1.1.1.8 Remote P or t: 23 Remote P assword: (UNDEFINED) Remote User ID: (UNDEFINED) Session T er mination Charact ...

  • Patton electronic 2120 - page 36

    36 of application, the SLIP connection is usually terminated once the user is finished accessing the LAN/Internet. Figure 9. SLIP T er minal Server System Settings Boot Message Displa y Enable: no Def ault Gatew ay IP Address: <IP Address of Default Gatewa y of 2120 LAN> DHCP Enable: no ...

  • Patton electronic 2120 - page 37

    37 IP Address Configured: <2120 Unit IP Address Assigned by Netw ork Admin> MA C Address: <Factory Assigned> Management Enable: ye s (or pref erred) Management Inactive Timeout (min): 15 (or preferred) Prompt: TS> (or pref erred) Subnet Mask Configured: <Subnet Mask of 2120 Unit LAN> EIA232 Interface Settings Character Length ...

  • Patton electronic 2120 - page 38

    38 User A uthentication Protocol: none EIA232 Raw-TCP/T elnet Settings Connection F rom Local Enable: no Connection F rom Remote Enable: yes Connection Retr y F requency (sec): 0 Local P or t: 404 (or required setting) Remote IP Address: 1.1.1.8 Remote P or t: 23 Remote P assword: (UNDEFINED) Remote User ID: (UNDEFINED) Session T er mination Charac ...

  • Patton electronic 2120 - page 39

    39 Privilege Each user in the 2120 user database is assigned a privilege that identi- fies how each user ma y inter act with the Model 2120. The three types of privileges that exist in the Model 2120 are defined as f ollows: User - The User privilege per mits a user to access only the serial interf ace. If the Model 2120 is configured for T elne ...

  • Patton electronic 2120 - page 40

    40 Total Users = 3 TS> Deleting All Users Deleting all users is accomplished by e xecuting the f ollowing commands at the 2120 command system prompt: TS>configure userdatabase deleteall<Enter> TS>configure activate<Enter> activate is complete! V erifying that all active users hav e been deleted from the user database is accompl ...

  • Patton electronic 2120 - page 41

    41 --> User Database <-- john,123abc,user tom,98lk12,both Total Users = 2 TS> Modifying A User Modifying a user's pass word or privilege is accomplished by e xecuting the f ollowing commands at the 2120 command system prompt: TS>show userdatabase all<Enter> --> User Database <-- john,123abc,user tom,98lk12,both Total Us ...

  • Patton electronic 2120 - page 42

    42 3.8 IP ADDRESSING Unit IP Address The IP address used to manage the Model 2120 unit can be configured statically or dynamically . The Model 2120 is defaulted to use DHCP (Dynamic Host Configuration Protocol) to dynamically obtain the unit IP address ov er the LAN from an active DHCP server . When using DHCP , the 2120 sends the DHCP ser v er M ...

  • Patton electronic 2120 - page 43

    43 F or PPP applications that require a static IP address f or the ser ial inter- f ace, an assigned IP address is obtained from y our Network Administra- tor , and is configured by e xecuting the f ollowing commands at the 2120 command system prompt: TS>configure eia232 interface ipaddrcfg <assigned IP address><Enter> TS>configu ...

  • Patton electronic 2120 - page 44

    44 Subnet Mask The Subnet Mask settings that correspond with the 2120 unit and serial interf ace IP addresses should be configured with the appropriate Subnet Mask f or the LAN where the IP addresses reside. The Subnet Mask f or the Model 2120 unit is configured by e xecuting the f ollowing commands at the 2120 command system prompt: TS>config ...

  • Patton electronic 2120 - page 45

    45 activate is complete! TS> Windows Name Server (WINS) The Model 2120 suppor ts WINS address exchange with the PPP de vice. Primar y and secondar y WINS addresses can be configured for the PPP client de vice. The pr imary and secondar y WINS addresses are config- ured by e x ecuting the f ollowing commands at the 2120 command system prompt: T ...

  • Patton electronic 2120 - page 46

    46 TS>configure eia232 ppp peernsaddruseena yes TS>configure activate activate is complete! TS> 3.10 SOFTWARE INSTALLATION INSTRUCTIONS Because the Model 2120 stores its software in FLASH Memory , obtain- ing the latest software release is both quic k and easy . Using the inte- grated FTP (File T ransf er Protocol) client, new softw are re ...

  • Patton electronic 2120 - page 47

    47 5. If prompted f or P assword, type: < assigned Password > ” and press <Enter> . 6. At the FTP prompt, type: get < current 2120 software file- name > and press <Enter> . 7. If completed, type: quit and press <Enter> to return to the TS prompt 8. At the TS prompt, type: <activateimage> and press <Enter> ...

  • Patton electronic 2120 - page 48

    48 5. Enter your FTP P assword b y typing: < your e-mail address > and pressing <Enter> . 6. At the FTP prompt, type: get <current 2120 software file- name> and press <Enter> . 7. When completed, type: quit and press <Enter> to return to the TS prompt. 8. At the TS prompt, type: <activateimage> and press <Ente ...

  • Patton electronic 2120 - page 49

    49 4.0 INSTALLATION Once the Model 2120 is configured, it is ready to connect to the serial interf ace of the RS-232 de vice, to the Ether net interf ace, and to the power source . The Model 2120 is designed to connect an asynchronous RS-232 de vice to other de vices via the LAN/10Base-T interface. This section describes how to install the 2120. 4 ...

  • Patton electronic 2120 - page 50

    50 A C Po wer Supply (100-240V AC) The Model 2120/??/UI uses a +5VDC , 2A universal input, po wer supply that is equipped with a male IEC-320 power entry connector and sup- por ts a voltage r ange of 100-240V A C. This po w er supply connects to the Model 2120 by means of a cannon jac k on the rear panel. There are a variety of domestic and interna ...

  • Patton electronic 2120 - page 51

    51 5.0 OPERATION After configuring and installing the Model 2120, you are ready f or opera- tion. This section describes the operation of the Model 2120 Single P or t T er minal Server . 5.1 LED STATUS INDICATORS The Model 2120 f eatures se ven top panel LEDs and two rear panel LEDs. The figures below show the their position. A descr iption of ea ...

  • Patton electronic 2120 - page 52

    52 T op Panel LEDs Figure 13 shows the location of the LEDs on the top panel; T ab le 3 lists descriptions for each LED . Figure 13. Model 2120 T op Panel LEDs T able 2: Model 2120 Rear P anel LED definitions LED Description Link Glows green to indicate that the Ethernet signal from the LAN is active . Status Blinks yello w indicating the system s ...

  • Patton electronic 2120 - page 53

    53 Note The DCD LED is an indicator of whether the 2120 is configured for DCE or DTE oper ation. When configured f or DCE, the DCD LED will glow constantly e xcept for when a session is being ter- minated. When configured f or DTE, the DCD LED will only glo w when a connection is established with the serial interf ace. 5.2 FLOW CONTR OL AND SESS ...

  • Patton electronic 2120 - page 54

    54 trolled by tw o ASCII characters, 0x11 (XON) and 0x13 (XOFF). These characters are fix ed and not configurable in the Model 2120. The XON and XOFF characters are simply sent through the data stream, in other words, the y look like data. T o stop receiving data, XOFF is sent to the sender and the sender stops sending data until it receives an X ...

  • Patton electronic 2120 - page 55

    55 EIA232 Connection Closure The "eiaconclose" allows an administrativ e user to manually disconnect or close a user connection on the Model 2120 serial interface . The f ol- lowing illustrates ho w to issue the "eiaconclose" command: TS> eiaconclose<Enter> (or "e<Enter>") EIA connection close complete! ...

  • Patton electronic 2120 - page 56

    56 Raw-TCP The "ra wtcp" command allows the Model 2120 to estab lish a Raw-TCP session with a remote IP de vice suppor ting TCP . The following illustr ates how to issue the "ra wtcp" command: TS> rawtcp <IP address of remote device><Enter> (or "r <IP address of remote device><Enter>") connec ...

  • Patton electronic 2120 - page 57

    57 APPENDIX A MODEL 2120 SINGLE PORT T ER MINAL SERVER SPECIFICATIONS A.1 SERIAL INTERFACE DB-25 male or f emale, DB-9 male or f emale (RJ-45F jack with 6" RJ-45 to DB-9 adapter cable), and RJ-45 Male connector options A.2 SERIAL T RANSMISSION RS-232 Asynchronous, 50 to 115.2 kbps (softw are selectable) A.3 DCE/DTE DCE or DTE (software selecta ...

  • Patton electronic 2120 - page 58

    58 A.12 T EMPERATURE 32–122°F (0–50°C) A.13 ALTITUDE 0 to 15,000 f eet (0 to 4,572 meters) A.14 HUMIDITY Up to 95% non-condensing A.15 DIMENSIONS 3.5L X 2.1W X 0.78H in. (9.0L X 5.3W X 1.9H cm) A.16 W EIGHT 0.2 lbs (0.09 kg) ...

  • Patton electronic 2120 - page 59

    59 APPENDIX B MODEL 2120 SINGLE PORT T ER MINAL SERVER SOFTWARE COMMAND DEFINITIONS In the commands defined below , X = V alid entr y/setting for that configu- ration parameter . Note Contact your Network Administrator if y ou have questions regarding configuration parameters required f or y our application and/or LAN. B.1 ACTIVATE IMA G E COMMA ...

  • Patton electronic 2120 - page 60

    60 Note MUST be entered immediately after each “configure” command string to activate configuration changes . configure clear Clears changes in configuration parameters prior to “activating” them and re verts back to the pre vious settings. Accessibility: N/A Def ault: N/A V alid Entr ies: N/A Note Once changes in parameters are activ a ...

  • Patton electronic 2120 - page 61

    61 configure eia232 interface dtedce X Sets the RS232 Ph ysical P or t of the serial interface. Accessibility: READ/WRITE Def ault: DCE V alid Entr ies : DCE, DTE configure eia232 interface flowcontr ol X Sets the RS-232 Flow Control of the serial interf ace. Accessibility: READ/WRITE Def ault : none V alid Entr ies: none, hardw are, xonxoff con ...

  • Patton electronic 2120 - page 62

    62 configure eia232 interface rxbuflen X Receive b uffer length <num char>. configure eia232 interface stoplength X Sets the RS-232 Stop Length (in bits) of the serial interface . Accessibility: READ/WRITE Def ault: 1 (bit) V alid Entr ies: 1, 2 configure eia232 interface subnetcfg X Sets the Subnet Mask used to conduct PPP or SLIP operat ...

  • Patton electronic 2120 - page 63

    63 Note When set to YES, the 2120 will automatically request and use an IP address assigned by the DHCP Server f or PPP opera- tions. This f eature will not function unless there is an active DHCP Server on the LAN. configure eia232 ppp fcslength X FCS length configure eia232 ppp dhcpwaddr X DHCP hardwar e address configure eia232 ppp peeripaddr ...

  • Patton electronic 2120 - page 64

    64 Accessibility: READ/WRITE Def ault: 0.0.0.0 V alid Entr ies: Any in IP address f or mat. configure eia232 ppp rxaccm X Receive async contrl character map configure eia232 ppp txaccm X T ransmit async contrl character map configure eia232 ppp userauthprot X P er mits the use of P AP as a user authentication protocol with PPP oper- ations. Acce ...

  • Patton electronic 2120 - page 65

    65 Def ault: 0 (Disabled) V alid Entr ies: 0–65535 Note T o activate the auto connection feature , this must be set to any number (up to 65535) other than 0, “configure eia232 rawtcp_telnet confromlocena” must be set to YES, and a valid IP address must be entered into “configure eia232 rawtcp_telnet remip”. configure eia232 rawtcp_teln ...

  • Patton electronic 2120 - page 66

    66 Accessibility: READ/WRITE Def ault: UNDEFINED (no entr y) V alid Entr ies: Any alphanumeric entry with a str ing size up to 32 b ytes configure eia232 rawtcp_telnet rem userid X Sets/activates the User ID sent with automatic connection requests to a remote de vice/application ov er the LAN. Accessibility: READ/WRITE Def ault: UNDEFINED (no entr ...

  • Patton electronic 2120 - page 67

    67 Def ault: yes V alid Entr ies: yes , no Note Set to NO if the serial device is aff ected/confused by the boot message. configure system defgatewa yipddr X Sets the IP address of the def ault gatew ay . Accessibility: READ/WRITE Def ault: 0.0.0.0 (disabled) V alid Entr ies: Any in MA C address format Note The 2120 will attempt to find and use t ...

  • Patton electronic 2120 - page 68

    68 configure system manena X P er mits access to the Model 2120 Software Command System via a remote T elnet session over the LAN. Accessibility: READ/WRITE Def ault: yes V alid Entr ies: yes , no Note If disabled, access to the Model 2120 Softw are Command Sys- tem can is only possible via the serial interf ace. configure system maninactiveto X ...

  • Patton electronic 2120 - page 69

    69 configure userdatabase createuser X Creates new users in the user database b y specifying a user name, pass word, and privilege. Accessibility: READ/WRITE Def ault: user database empty! V alid Entr ies: user name (up to 32 characters), pass word (up to 32 char- acters), privilege (user , admin, both) configure userdatabase deleteall Deletes th ...

  • Patton electronic 2120 - page 70

    70 B.6 PING COMMANDS ping Enables the 2120 to ping other de vices on the LAN. Accessibility: N/A Def ault: N/A V alid Entr ies: N/A B.7 RA WTCP COMMANDS rawtcp Enables the 2120 to initiate a Ra w-TCP session with remote devices ov er the LAN. Accessibility: N/A Def ault: N/A V alid Entr ies: N/A B.8 SHO W COMMANDS show Returns the Show Help Menu. A ...

  • Patton electronic 2120 - page 71

    71 show eia232 interface charlength Returns current RS-232 Character Length setting. Accessibility: READ ONL Y show eia232 interface curuserlogged Returns the user name of the current active user on the serial interface . Accessibility: READ ONL Y show eia232 interface datarate Returns current RS-232 Datarate setting. Accessibility: READ ONL Y show ...

  • Patton electronic 2120 - page 72

    72 show eia232 interface parity Returns current RS-232 Parity setting. Accessibility: READ ONL Y show eia232 interface pr otocol Returns current RS-232 Protocol setting. Accessibility: READ ONL Y show eia232 interface rxb uflen Receive buffer length <num char> show eia232 interface rxidlechartrig Receive idle char for trig <num char> s ...

  • Patton electronic 2120 - page 73

    73 show eia232 ppp Returns the PPP Help Menu. Accessibility: N/A Def ault: N/A V alid Entr ies: N/A Note Needs to be entered first in all "show eia232 ppp" command strings. show eia232 ppp all Returns all current PPP settings. Accessibility: READ ONL Y show eia232 ppp dhcpena Returns current PPP related DHCP enable setting. Accessibility ...

  • Patton electronic 2120 - page 74

    74 address will e xpire. Accessibility: READ ONL Y Def ault: 0 (seconds) P ossible V alues: 0-65535 show eia232 ppp dhcpipaddr Returns the current PPP related IP address obtained from the active DHCP Ser v er . Accessibility: READ ONL Y Def ault: 0.0.0.0 P ossible V alues: Any in IP address f or mat show eia232 ppp dhcpsubnet Returns the current PP ...

  • Patton electronic 2120 - page 75

    75 Accessibility: READ ONL Y Def ault: 0 P ossible V alues: 0 to 4294967296 Note This number increments with each LCP Echo Requests received from the PPP client. show eia232 ppp peeripaddruseena Returns the current setting of the Peer IP Addressing Use Enab le fea- ture. Accessibility: READ ONL Y show eia232 ppp peernsaddruseena Returns the current ...

  • Patton electronic 2120 - page 76

    76 interf ace. Accessibility: READ ONL Y show eia ppp rxaccm Receive Async-Control Character Map show eia ppp txaccm T ransmit Async-Control Character Map show eia232 ppp userauthpr ot Returns the current User Authentication Protocol setting. Accessibility: READ ONL Y show eia232 ra wtcp_telnet Returns Raw-TCP/T elnet Help Menu. Accessibility: N/A ...

  • Patton electronic 2120 - page 77

    77 show eia232 ra wtcp_telnet remip Returns current Remote IP Address setting. Accessibility: READ ONL Y show eia232 ra wtcp_telnet remport Returns current Remote Port setting. Accessibility: READ ONL Y show eia232 ra wtcp_telnet rempwd Returns current Remote Pass word setting. Accessibility: READ ONL Y show eia232 ra wtcp_telnet remuserid Returns ...

  • Patton electronic 2120 - page 78

    78 show system all Returns all current System settings. Accessibility: READ ONL Y show system bootmessdispena Returns current Boot Message Display Enable setting. Accessibility: READ ONL Y show system defgate way active Default Gateway Active show system defgate waycfg Default Gateway Configured show system dhcpena Returns current DHCP Enable sett ...

  • Patton electronic 2120 - page 79

    79 show system dhcpe xpiretime Returns when (in seconds) the lease on the current IP address will e xpire. Accessibility: READ ONL Y Def ault: 0 (seconds) P ossible V alues: 0–65535 show system dhcpipaddr Returns the current unit IP address obtained from the active DHCP Ser v er . Accessibility: READ ONL Y Def ault: 0.0.0.0 P ossible V alues: Any ...

  • Patton electronic 2120 - page 80

    80 show system maninactiveto Returns current management inactive timeout setting. Accessibility: READ ONL Y show system pr ompt Returns current system command prompt setting. Accessibility: READ ONL Y show system subnetactive Returns current active Subnet Mask f or the Model 2120 unit. Accessibility: READ ONL Y show system subnetcfg Returns current ...

  • Patton electronic 2120 - page 81

    81 APPENDIX C PIN CONFIGURATIONS EIA - 232 EIA - 574 EIA - 561 DIRECTION DCE ST ANDARD SETTING DIRECTION 1 - (FG) Frame Ground ------ 2 - (TD) T ransmit Data Input 3 - (RD) Receive Data Output 4 - (RTS) Request to Send Input 5 - (CTS) Clear to Send Output 6 - (DSR) Data Set Ready Output 7 - (SG) Signal Ground ------ Input Data T erm. Ready (DTR) - ...

  • Patton electronic 2120 - page 82

    82 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ ___________________________________________________ ...

  • Patton electronic 2120 - page 83

    83 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ ___________________________________________________ ...

  • Patton electronic 2120 - page 84

    84 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ ___________________________________________________ ...

Fabricant Patton electronic Catégorie Security Camera

Les documents que nous recevons du fabricant de l'appareilPatton electronic 2120 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Patton electronic
- manuels d’utilisations 2120
- fiches produit Patton electronic
- dépliants
- ou étiquettes-énergie Patton electronic 2120
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Patton electronic 2120.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Patton electronic 2120, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Patton electronic 2120. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Patton electronic 2120.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Patton electronic 2120, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Patton electronic 2120 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Patton electronic 2120.

Le manuel d’utilisation complet Patton electronic, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Patton electronic 2120 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Patton electronic 2120, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPatton electronic 2120 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Patton electronic 2120 - qui devraient nous aider dans les premières étapes lors de l'utilisation Patton electronic 2120
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Patton electronic 2120
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Patton electronic 2120 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Patton electronic 2120?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Patton electronic 2120, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Patton electronic 2120 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)