-
La Crosse Technology WS-2510 - page 1
Touch Screen Wireless Weather Station WS-2510 Operating instructions ...
-
La Crosse Technology WS-2510 - page 2
2 Contents 1. General informati on and functi oning ................................................................................ 3-5 Quick overview of the display fields on the main display ...................................................... 3-4 Weather station co nnection panel, mounting arrangements and battery compartment ............5 2. ...
-
La Crosse Technology WS-2510 - page 3
3 1. General information and functioning The WS-2510 Touch Screen Wireless Weather Station represents a high-q uality, extremely convenient universal weather measuring system, which can record, process and di splay dat a from up to 8 external wireless temperature and humidity sensors, a wireless wind sensor, a wireless rainfall se nsor and a wirele ...
-
La Crosse Technology WS-2510 - page 4
4 1 4 2 3 1.1. 4 2.1. 12 9 11 10 14 20 8 18 15 16 17 19 13 5 6 7 3 Other - Confirmation tone for touch screen operation can be selected to on or off. - Can be desk mounted or wall mounted accordi ng to the design. - Programmable time for display illumination All important weather information appears at the same time on the display, so that operator ...
-
La Crosse Technology WS-2510 - page 5
5 Weather station connecti on pane, mo unting arrangements and battery compartment. The indoor/outdoor sensor system of the WS-2510 operates exclusively with wireless radio data transfer. You can set up or mount the sensors up to 300 feet (100 m) (depen ding on local conditions, see section on “range”) from t he base station. Longer distances a ...
-
La Crosse Technology WS-2510 - page 6
6 Setting up/Wall mounting Depending on requirem ents, the weather station can be hung o n a vertical surface (wall) by means of the hanging eyes or set up on a horizontal surface using the foldout desk stand. There are two possible latchi ng positions (45º/60º) in the hinge of the desk stand for when the unit is mounted on the des k. When using ...
-
La Crosse Technology WS-2510 - page 7
7 ensures optimum reception in the initialization pha se. If the si gnal from the sensor is unable to be received within this time, then the reception is affected and shou ld be im proved by re-positioning the sensor. The external temperature and hum idity sensors shoul d be addressed according to sectio n 2.3.4. 2.2.1. Insertion of magnets into th ...
-
La Crosse Technology WS-2510 - page 8
8 electronics. The upper pa rt of the housing can now be placed so that the solar cell is on the same side as the magnet, with the electronic part directly opposite it, with the three cat ches fitting neatly into the holding devices in the lower part . Finally turn the upper part gently anti-cl ockwise until it secu rely slots into holding devices ...
-
La Crosse Technology WS-2510 - page 9
9 2.3.8 Information on the storage of solar cell po w ered outdoor sen sors These sensors receive their operating vo lt age from a solar cell that charges an internal battery to provide po wer for periods of darkness and ba d weather. If one of these sensors is out of action for some time and do es not receive any light this has no affect on the in ...
-
La Crosse Technology WS-2510 - page 10
10 3.1.1. General settings Illumination settings To switch on the illumination, press any touch screen field on the display. The illumination w ill now remai n switched on for the programmed time (after the last key press). As standard, the illumi nation is active for 10s with battery opera tion and continuously on when using the AC power adaptor. ...
-
La Crosse Technology WS-2510 - page 11
11 Illumination time for AC adaptor operation The illumination time for AC adaptor oper ation (“line”) is displayed in the “L IGHT” field (touch screen field 1). A setting here is only meaningful when the weather sta tion is powered by means of the AC adaptor power su pply. The time displayed shows in hours and minut es how long the display ...
-
La Crosse Technology WS-2510 - page 12
12 Calibration of the rainfall reading indicator The rainfall measuring system is delivered with a very hi gh accurac y, so that normally no calibration is required. A calibration only becomes necessa ry when very high accura cy is require d for professional use or for special purposes. Before starting the calibration of the rainf all reading indic ...
-
La Crosse Technology WS-2510 - page 13
13 Setting the air pressure display units The display units for air pressure are shown in tou ch screen field 11 on the right hand side next to the air pre ssure value. The factory setting is hPa. - By touching field 11 the display units can be switche d between hPa, mmHg or inHg. Keypad beep on/off - The keypad beep can be switched on (S ound on) ...
-
La Crosse Technology WS-2510 - page 14
14 4 1 3 2 The seconds are automatically set to zero. - The WWVB reception can also be switched on or off by means of the “WWVB” touch scre en field as long as the time is flashing (radio mast symbol on or off respectively). - In addition, it now possible to sele ct the display format for the time, date and day of the week between military and ...
-
La Crosse Technology WS-2510 - page 15
15 3.2. Normal display function The diagram below shows an example of t he normal weather station display. In t he following descri ption of the individual display fields, the meaning of the display is always explained first and in some cases the necessary operating actions followed by any available key functions so that you can get a quick overvie ...
-
La Crosse Technology WS-2510 - page 16
16 3.2.1.2. Outdoor sensors (fields 3 to 6) The top right hand field of the display is associated with the outdoo r wi reless sensors for temp erature/humidity. It displays the following information from left to right: 1. Tendency arro w symbols: Indication of the tendency of the temperat ure at the location of the selected out door sensor compared ...
-
La Crosse Technology WS-2510 - page 17
17 4. Here, the “Graph” symbol shows that the trend display for t he wind direction has been selected in the history field. It only appears if it has previously been selected (see 3.2.6.:“History”). The trend can be displayed in km/h, m/s, mph or knots. However, if Beaufort or degrees have been chosen for the main displa y, any trend availa ...
-
La Crosse Technology WS-2510 - page 18
18 The maximum values the last 8 days are display ed. 3. Here, the “Graph” symbol shows that the trend display for the air pressure has been selected in the h istory field. It only appears if it has previously been selected (see section on “Hi story ”). If the air pressure history is active, then the tendency indicator for the development o ...
-
La Crosse Technology WS-2510 - page 19
19 1 2 3 1 2 3 1 Please note: - With temperature and pressure, the hist ory is shown referred to the current value. Here the display can optionally be in the form of a bar or line diagram according to the setting in the configuratio n mode. - With humidity, wind speed, rainfall, hours of sunshine (8 -day trend only) and brightness, the history is s ...
-
La Crosse Technology WS-2510 - page 20
20 1 2 3.2.9. Time/Date The display field for the time/date is situ ated at the bottom center of the display: 24h format 12 h format 1. The time is displayed in hours and min utes and the da te with the day of the week, day and month. Seconds are indicated by the two flashing dots. The display format is selecte d in the configuration mode. 2. If a ...
-
La Crosse Technology WS-2510 - page 21
21 Example for the display of minimum values. Display min/max values - The display mode is selected by touching the appro priate field “MAX” (field 27) or “MIN” (field 25). The part icular touch screen field activated (MIN or MAX) will be faded out. Both titles are only visible in normal display mode. - If the touch screen field for a value ...
-
La Crosse Technology WS-2510 - page 22
22 3.4. Programming mode (entering alarm values) You can program the weather statio n so that an audible-visible alarm occurs wh en certain minimum or m aximum values are reached. As well as this, daily wake-up times can be progra mmed so that the weather station can also be use d as an alarm clock or an appointm ent reminder. Alarm values can be s ...
-
La Crosse Technology WS-2510 - page 23
23 3.4.2. Setting/Resetting th e MIN/MAX alarm v alues - After activating one of the alarm value displays (MIN or M AX), touch the value field for whi ch the alarm value is to be set. - The value will flash and the lower contro l field will change to the following form: - The flashing value can be adju sted using the “-” and “+” touc h scre ...
-
La Crosse Technology WS-2510 - page 24
24 3.4.4. Alarm initiation, Alarm reset - If the measured value exceeds or falls below one of the set alarm values, the di splay will go off and the alarm value in question together with the te xt “ALARM” and the appropriate high or low deviation (MAX or MIN) will be displayed. At the same time, an intermittent alarm tone will sound. - In addit ...
-
La Crosse Technology WS-2510 - page 25
25 4. Changing batteries Base st ation If the flat battery symbol appears in the display (se e page 9) all batteries must be changed for ones of the same type as described in Section 2 (Battery operation, page 5). Always change all the batteries and use only high-quality alkaline cells. Please note! After changing the batter ies, the weather statio ...
-
La Crosse Technology WS-2510 - page 26
26 Rotate the weather station a little if requ ired, and if reception is ba d, locate it away from electric motors, electrical machines, televisions, computer monitors and la rge metal surfaces. To facilitate commissioning you can initially locate the sensors in the vicinity of the base unit (at least 6 feet or 2 m distance). In this way you can ch ...
-
La Crosse Technology WS-2510 - page 27
27 9. Technical data Measuring interval : ....................................................................... appr ox.3 min Transmission frequen cy: ............................................................... 433.92 MHz Free field ran ge: ............................................................................... max.100 m Indoor temper ...
-
La Crosse Technology WS-2510 - page 28
28 meteorological office or by calculation: absol ute air pres sure ±0.11hPa per meter of the measuring location above/belo w mean sea level). Wind chill equivalent temperature (perceived temperature)- A fictitious temp erature, which the human body feels un der certain conditions in stead of the measured temperature, and wh ich can be used at low ...
-
La Crosse Technology WS-2510 - page 29
29 WARRANTY INFORMA TION La Crosse Technolog y, Ltd provides a 1-year limited warranty on this product against manufacturing d efects in materials and workmanship. This limited warranty begins o n the original date of purchas e, is valid only on products purchased an d used in North America an d onl y to the orig inal purchaser o f this product. To ...
Avez-vous une question à propos de La Crosse Technology WS-2510?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec La Crosse Technology WS-2510, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec La Crosse Technology WS-2510 il est probable qu’il a envie de partager la façon de le résoudre.