Français dropdown-ico

Manuel d’utilisation Dukane 8107WIB

32 pages 1.98 mb
Télécharger

Aller à la page of 32

Summary
  • Dukane 8107WIB - page 1

    1 NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a PC. • Some PCs may have multiple display screen modes. Use of some of these modes will not be possible with this projector . • Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of ...

  • Dukane 8107WIB - page 2

    2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be dif ferent. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Active video (C) Data Data H. Sync. V. Sync. Sync (A ...

  • Dukane 8107WIB - page 3

    3 Connection to the por ts Connection to the ports NO TICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. ►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port. COMPUTER IN1 COMPUTER IN2 HDMI USB TYPE B S-VIDEO VIDEO AUDIO OUT AUDIO IN3 AUDI ...

  • Dukane 8107WIB - page 4

    4 D S-VIDEO Mini DIN 4pin jack • System: NTSC, P AL, SECAM, P AL-M, P AL-N, NTSC4.43, P AL(60Hz) Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (P AL/SECAM, burst) 75Ω terminator 2 Brightness signal, 1.0Vp-p, 75Ω terminator 3 Ground 4 Ground Connection to the por ts (continued) 4 3 2 1 E VIDEO RCA jack ...

  • Dukane 8107WIB - page 5

    5 COMPUTER IN1 COMPUTER IN2 HDMI USB TYPE B S-VIDEO VIDEO AUDIO OUT AUDIO IN3 AUDIO IN1 AUDIO IN2 MIC MONITOR OUT CONTROL USB TYPE A DC5V 0.5A LAN L R R L Connection to the por ts (continued) G AUDIO IN1, H AUDIO IN2 Ø3.5 stereo mini jack • 200 mV rms, 47kΩ terminator AUDIO IN3 I R, J L RCA jack x2 • 200 mV rms, 47kΩ terminator AUDIO OUT K ...

  • Dukane 8107WIB - page 6

    6 Connection to the por ts (continued) O USB TYPE B USB B type jack Pin Signal 1 +5V 2 - Data 3 + Data 4 Ground 4 3 2 1 P CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the section "RS-232C Communication". Pin Signal Pin Signal Pin Signal 1 (No connection) 4 (No connection) 7 RTS 2 RD 5 Ground 8 CT ...

  • Dukane 8107WIB - page 7

    7 Connection to the por ts (continued) T o input component video signal to COMPUTER IN ports ex. T o input component video signal to the COMPUTER IN1 or IN2 port of the projector , use a RCA to D-sub cable or adapter . For about the pin description of the required cable or adapter , refer to the descriptions about COMPUTER IN1 and IN2 port ( & ...

  • Dukane 8107WIB - page 8

    8 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer . For details of RS-232C commands, refer to RS-232C Communication / Network command table ( & 17 ). Connection 1. T urn off the projector and the computer . 2 ...

  • Dukane 8107WIB - page 9

    9 RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command for mat ("h" shows hexadecimal) Byte Number 0 1 2 3 4 5 6 7 8 9 10 11 12 Command Action Header Data Header code Packet Data size CRC ag Action T ype Setting code L H L H L H L H L H L H <SET> Change setting to desired value [(cL)(cH)] b ...

  • Dukane 8107WIB - page 10

    10 RS-232C Communication (continued) 3. R esponse code / Er r or code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly , the projector changes the setting data for the specied item by [T ype], and it returns the code. (2) NAK reply : 15h When the projecto ...

  • Dukane 8107WIB - page 11

    11 Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser . For details of RS-232C commands, refer to RS-232C Communication / Network command table ( & 17 ). Connection 1. T urn off the projector and the computer . 2. Connect the projector&ap ...

  • Dukane 8107WIB - page 12

    12 Communicaion P or t The following two ports are assigned for the command control. TCP #23 TCP #9715 Congure the following items form a web browser when command control is used. Port Settings Network Control Port1 (Port: 23) Port open Click the [Enable] check box to open [Netwo rk Control Port1 (Port: 23)] to use TCP #23. Default setting is ? ...

  • Dukane 8107WIB - page 13

    13 Command Control via the Networ k (continued) Command control settings [TCP #23] 1. Command for mat Same as RS-232C communication, refer to R S-232C Communicaton command format. 2. R esponse code / Er r or code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4). One au ...

  • Dukane 8107WIB - page 14

    14 2. R esponse code / Er r or code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (1) ACK reply : 06h + ××h ( ××h : connection ID ) (2) NAK reply : 15h + ××h (3) Error reply : 1Ch + 0000h + ××h (4) Data reply : 1 ...

  • Dukane 8107WIB - page 15

    15 This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by LAN communicaton, an external device that i s connected with this projector by RS-232C communication can be controlled from the computer as a network terminal. For details, see the 6. Network Bridge Function - Network Guide. Connection 1. Conn ...

  • Dukane 8107WIB - page 16

    16 Communication settings For communication setting, use the OPTION - SERVICE - COMMUNICA TION menu. ( & OPTION menu - SERVICE - COMMUNICA TION in the User's Manual - Operating Guide ) Item Condition BAUD RA TE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (xed) P ARITY NONE/ODD/EVEN Start bit 1 bit (xed) Stop bit 1 bi ...

  • Dukane 8107WIB - page 17

    17 RS-232C Communication / Network command table Names Operation T ype Header Command Data CRC Action T ype Setting code Power Set T urn off BE EF 03 06 00 2A D3 01 00 00 60 00 00 T urn on BE EF 03 06 00 BA D2 01 00 00 60 01 00 Get BE EF 03 06 00 19 D3 02 00 00 60 00 00 [Example return] 00 00 01 00 02 00 [Off] [On] [Cool down] Input Source Set COMP ...

  • Dukane 8107WIB - page 18

    RS-232C Communication / Netw ork command ta ble (continued) 18 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code CONTRAST Reset Execute BE EF 03 06 00 A4 D2 06 00 01 70 00 00 GAMMA Set 1 DEF AUL T BE EF 03 06 00 07 E9 01 00 A1 30 20 00 1 CUSTOM BE EF 03 06 00 07 FD 01 00 A1 30 10 00 2 DEF AUL T BE EF 0 ...

  • Dukane 8107WIB - page 19

    RS-232C Communication / Netw ork command ta ble (continued) 19 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code User Gamma Point 7 Get BE EF 03 06 00 80 FE 02 00 96 30 00 00 Increment BE EF 03 06 00 E6 FE 04 00 96 30 00 00 Decrement BE EF 03 06 00 37 FF 05 00 96 30 00 00 User Gamma Point 7 Reset Execu ...

  • Dukane 8107WIB - page 20

    RS-232C Communication / Netw ork command ta ble (continued) 20 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code COLOR TEMP OFFSET B Get BE EF 03 06 00 BC F4 02 00 B7 30 00 00 Increment BE EF 03 06 00 DA F4 04 00 B7 30 00 00 Decrement BE EF 03 06 00 0B F5 05 00 B7 30 00 00 COLOR TEMP OFFSET B Reset Exe ...

  • Dukane 8107WIB - page 21

    RS-232C Communication / Netw ork command ta ble (continued) 21 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code H POSITION Get BE EF 03 06 00 F1 82 02 00 01 21 00 00 Increment BE EF 03 06 00 97 82 04 00 01 21 00 00 Decrement BE EF 03 06 00 46 83 05 00 01 21 00 00 H POSITION Reset Execute BE EF 03 06 0 ...

  • Dukane 8107WIB - page 22

    RS-232C Communication / Netw ork command ta ble (continued) 22 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code HDMI RANGE Set AUTO BE EF 03 06 00 86 D8 01 00 22 20 00 00 NORMAL BE EF 03 06 00 16 D9 01 00 22 20 01 00 ENHANCED BE EF 03 06 00 E6 D9 01 00 22 20 02 00 Get BE EF 03 06 00 B5 D8 02 00 22 20 ...

  • Dukane 8107WIB - page 23

    RS-232C Communication / Netw ork command ta ble (continued) 23 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code PERFECT FIT Left T op -H Get BE EF 03 06 00 31 89 02 00 21 21 00 00 Increment BE EF 03 06 00 57 89 04 00 21 21 00 00 Decrement BE EF 03 06 00 86 88 05 00 21 21 00 00 PERFECT FIT Left T op -V ...

  • Dukane 8107WIB - page 24

    RS-232C Communication / Netw ork command ta ble (continued) 24 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code ECO MODE Set NORMAL BE EF 03 06 00 3B 23 01 00 00 33 00 00 ECO BE EF 03 06 00 AB 22 01 00 00 33 01 00 Get BE EF 03 06 00 08 23 02 00 00 33 00 00 MIRROR Set NORMAL BE EF 03 06 00 C7 D2 01 00 ...

  • Dukane 8107WIB - page 25

    RS-232C Communication / Netw ork command ta ble (continued) 25 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code VOLUME - S-VIDEO Get BE EF 03 06 00 75 CD 02 00 62 20 00 00 Increment BE EF 03 06 00 13 CD 04 00 62 20 00 00 Decrement BE EF 03 06 00 C2 CC 05 00 62 20 00 00 VOLUME - VIDEO Get BE EF 03 06 0 ...

  • Dukane 8107WIB - page 26

    RS-232C Communication / Netw ork command ta ble (continued) 26 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code AUDIO SOURCE USB TYPE B Set OFF BE EF 03 06 00 AE DE 01 00 3C 20 00 00 AUDIO IN1 BE EF 03 06 00 3E DF 01 00 3C 20 01 00 AUDIO IN2 BE EF 03 06 00 CE DF 01 00 3C 20 02 00 AUDIO IN3 BE EF 03 06 ...

  • Dukane 8107WIB - page 27

    RS-232C Communication / Netw ork command ta ble (continued) 27 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code LANGUAGE Set POLSKI BE EF 03 06 00 97 D7 01 00 05 30 0E 00 TÜRKÇE BE EF 03 06 00 07 D6 01 00 05 30 0F 00 DANSK BE EF 03 06 00 A7 DF 01 00 05 30 1 1 00 ČESKY BE EF 03 06 00 57 DF 01 00 05 ...

  • Dukane 8107WIB - page 28

    RS-232C Communication / Netw ork command ta ble (continued) 28 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code TEMPLA TE Set TEST P A TTERN BE EF 03 06 00 43 D9 01 00 22 30 00 00 DOT -LINE1 BE EF 03 06 00 D3 D8 01 00 22 30 01 00 DOT -LINE2 BE EF 03 06 00 23 D8 01 00 22 30 02 00 DOT -LINE3 BE EF 03 06 ...

  • Dukane 8107WIB - page 29

    RS-232C Communication / Netw ork command ta ble (continued) 29 (continued on next page) Names Operation T ype Header Command Data CRC Action T ype Setting code MY BUTT ON-1 Set COMPUTER IN1 BE EF 03 06 00 3A 33 01 00 00 36 00 00 COMPUTER IN2 BE EF 03 06 00 FA 31 01 00 00 36 04 00 LAN BE EF 03 06 00 0A 34 01 00 00 36 0B 00 USB TYPE A BE EF 03 06 00 ...

  • Dukane 8107WIB - page 30

    RS-232C Communication / Netw ork command ta ble (continued) 30 Names Operation T ype Header Command Data CRC Action T ype Setting code MY SOURCE Set COMPUTER IN1 BE EF 03 06 00 FA 38 01 00 20 36 00 00 COMPUTER IN2 BE EF 03 06 00 3A 3A 01 00 20 36 04 00 LAN BE EF 03 06 00 CA 3F 01 00 20 36 0B 00 USB TYPE A BE EF 03 06 00 5A 3B 01 00 20 36 06 00 USB ...

  • Dukane 8107WIB - page 31

    31 PJLink command PJLink command POWR Power Contorol 0 = Standby 1 = Power On POWR ? Power Status inquiry 0 = Standby 1 = Power On 2 = Cool Down INPT Input Source selection 1 1 = COMPUTER IN 1 12 = COMPUTER IN 2 22 = S-VIDEO 23 = VIDEO 31 = HDMI 41 = USB TYPE A 51 = LAN 52 = USB TYPE B INPT ? Input Source inquiry 1 1 = COMPUTER IN 1 12 = COMPUTER I ...

  • Dukane 8107WIB - page 32

    32 PJLink command (continued) Commands Control Description Parameter or Response ERST ? Error Status inquiry 1st byte: Refers to Fan error; one of 0 to 2 2nd byte : Refers to Lamp error; one of 0 to 2 3rd byte: Refers to T emptrature error; one of 0 to 2 4th byte: Refers to Cover error; one of 0 to 2 5th byte: Refers to Filter error; one of 0 to 2 ...

Fabricant Dukane Catégorie Projector

Les documents que nous recevons du fabricant de l'appareilDukane 8107WIB peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Dukane
- manuels d’utilisations 8107WIB
- fiches produit Dukane
- dépliants
- ou étiquettes-énergie Dukane 8107WIB
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Dukane 8107WIB.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Dukane 8107WIB, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Dukane 8107WIB. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Dukane 8107WIB.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Dukane 8107WIB, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Dukane 8107WIB par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Dukane 8107WIB.

Le manuel d’utilisation complet Dukane, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Dukane 8107WIB - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Dukane 8107WIB, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lDukane 8107WIB qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Dukane 8107WIB - qui devraient nous aider dans les premières étapes lors de l'utilisation Dukane 8107WIB
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Dukane 8107WIB
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Dukane 8107WIB dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Dukane 8107WIB?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Dukane 8107WIB, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Dukane 8107WIB il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)