Français dropdown-ico

Manuel d’utilisation Linksys USB100H1

44 pages 1.45 mb
Télécharger

Aller à la page of 44

Summary
  • Linksys USB100H1 - page 1

    HomeLink™ Series Phoneline + 10/100 U S B Network Adapter Model No.: USB100H1 User Guide usb100h1 April 2000.qxd 4/4/00 11:14 AM Page 1 ...

  • Linksys USB100H1 - page 2

    COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All Rights Reserved. Phoneline + 10/100 USB network Adapter is a register ed trademark of Linksys. Microsoft, Windows, and the Windows logo are r egistered trademarks of Micr osoft Corporation. All other trademarks and brand names are the pr operty of their respective proprietors. LIMITED W ARRA ...

  • Linksys USB100H1 - page 3

    Linksys HomeLink™ Series T able of Contents Introduction 1 Package Contents 2 Windows & Computer Compatibility 2 Getting to Know the Phoneline + 10/100 USB 3 Network Adapter The Adapter’ s Ports 3 The Adapter’ s LEDs 4 The USB Icon 4 USB Cabling 5 Modem and Fax Compatibility 5 Installing the Phoneline + 10/100 USB 6 Network Adapter Instal ...

  • Linksys USB100H1 - page 4

    Phoneline + 10/100 USB Network Adapter Introduction The Phoneline + 10/100 USB Network Adapter Congratulations on your purchase of the Linksys HomeLink Phoneline + 10/100 USB Netw ork Adapter . The Linksys HomeLink Phoneline + 10/100 USB Netw ork Adapter offers instant connecti vity to multiple PCs o ver your telephone wiring. There's no need ...

  • Linksys USB100H1 - page 5

    Linksys HomeLink™ Series Package Contents for the Phoneline + 10/100 USB Network Adapter • One HomeLink Phoneline + 10/100 USB Netw ork Adapter • One Standard USB Cable • One Standard T elephone Cable • One Driv er Diskette • One User Guide and Registration Card Windows & Computer Compatibility T o use this device, y ou must hav e M ...

  • Linksys USB100H1 - page 6

    Phoneline + 10/100 USB Network Adapter 3 Getting to Know the Phoneline + 10/100 USB Network Adapter The Adapter’ s Ports USB The USB port is where your 10/100 USB Netw ork Adapter will connect to your computer . This port is a USB type B por t. LAN 10/100 The LAN 10/100 port allo ws your computer to be connected to an Ethernet or F ast Ether net ...

  • Linksys USB100H1 - page 7

    Linksys HomeLink™ Series The Adapter’ s LEDs ACT The Activity LED will flick er orange when netw ork data is passing through the USB Netw ork Adapter . HOMELINK The HomeLink LED will illuminate green if a successful connection is made to a Phoneline netw ork. 10 The 10Mbps LED will illuminate green if a successful 10Mbps connection is made to a ...

  • Linksys USB100H1 - page 8

    Phoneline + 10/100 USB Network Adapter USB Cabling The EtherF ast 10/100 USB Netw ork Adapter comes with one USB cable. One end of the USB cable has a rectangular plug, w hich is called a type A con- nector . The other end of the cable has a square plug, or a type B connector . The USB cable’ s type B end connects to the USB device—in this case ...

  • Linksys USB100H1 - page 9

    Linksys HomeLink™ Series Installing the Phoneline + 10/100 USB Network Adapter Overview The follo wing instr uctions will help you ph ysically connect your computer to your netw ork through your Phoneline + 10/100 USB Netw ork Adapter . After you ph ysically install the adapter , you ha ve to then install the adapter’ s dri ver software onto y ...

  • Linksys USB100H1 - page 10

    Phoneline + 10/100 USB Network Adapter Connecting to a Phoneline Network Computers on a Phoneline netw ork can either connect through their HomeLink ports, or through your home’ s existing telephone wiring. The dia- gram below sho ws a HomeLink netw ork that takes advantage of both types of connections. F ollo w the instructions below to connect ...

  • Linksys USB100H1 - page 11

    Linksys HomeLink™ Series Connecting to an Ethernet or Fast Ether net Network 1. Attach one end of an Ethernet cab le into the USB Network Adapter’ s LAN 10/100 por t. 2. Plug the other end of the cab le into a Ethernet or F ast Ether net hub, switch, or router . If you plan to use both 10BaseT and 100Mbps netw ork segments on the same netw ork, ...

  • Linksys USB100H1 - page 12

    Phoneline + 10/100 USB Network Adapter 9 W indows 98 Installation & Setup Overview After ph ysicall y installing the Phoneline + 10/100 USB Network Adapter in your computer , follo w these instr uctions to install the netw ork dri ver . The installation procedure for the netw ork driver will v ar y slightly depending on which v ersion of W indo ...

  • Linksys USB100H1 - page 13

    Linksys HomeLink™ Series 10 4. Select "Search for the best dri ver for y our de vice (Recommended). ” Click Next. 5. Select "Flopp y disk dri ves". Click Ne xt to continue. N N o o t t e e : : Windows 98 may ask you for a c c o o m m p p u u t t e e r r o o r r w w o o r r k k g g r r o o u u p p n n a a m m e e . If so, skip ahe ...

  • Linksys USB100H1 - page 14

    Phoneline + 10/100 USB Network Adapter 11 6. A windo w will open saying that W indo ws is now ready to install the Linksys EtherF ast 1/10/100 USB Networ k Adapter driver . Click Next . 7. W indows will be gin copying the USB Adapter’ s dri ver f iles to your PC. Refer to the chart below to help guide y ou through the process. • If your PC asks ...

  • Linksys USB100H1 - page 15

    Linksys HomeLink™ Series 12 8. W indows will f inish installing the software onto y our PC. Click Finish . 9. When asked if y ou want to restart your PC, remo ve the Program Disk and click Ye s . If you are using the W indo ws CD-R OM, lea ve it in your PC. Y ou may need it later . If W indo ws does not ask you to restart your PC, click the Start ...

  • Linksys USB100H1 - page 16

    Phoneline + 10/100 USB Network Adapter 13 Network Component Configuration 1. Once you are back at the Windo ws 98 desktop, click on your taskbar's Start button, then Settings , then Control P anel , then double-click the Netw ork icon. 2. The Netw ork windo w will appear . Click on the Conf iguration tab . A windo w similar to the one below wi ...

  • Linksys USB100H1 - page 17

    Linksys HomeLink™ Series 14 3. Click the File and Print Sharing button. The File and Print Sharing win- do w will appear . 4. If you'd like others to be ab le to access the f iles on your PC's hard driv e, select I want to be a ble to giv e others access to m y f iles . 5. If you'd like to share y our printer with other users on th ...

  • Linksys USB100H1 - page 18

    Phoneline + 10/100 USB Network Adapter 15 7. After ensuring that all of the listed netw ork components are installed on your system, in the Primary Networ k Log on box select Client f or Micr osoft Netw orks . 8. Click on the Identif ication tab . T ype the name of your computer in the Computer Name box. Choose a name that is unique from the other ...

  • Linksys USB100H1 - page 19

    Linksys HomeLink™ Series 16 11. Optional: Choose the Access Control tab . Ensure that Shared-le vel access contr ol is selected. If the setting is on User -Lev el access contr ol and you can’ t change it, skip to problem 4 in the T roubleshooting section on page 23. 12. Click the OK button. Y our system may or ma y not ask you for y our W indow ...

  • Linksys USB100H1 - page 20

    Phoneline + 10/100 USB Network Adapter 17 14. A Logon windo w will appear , requiring you to enter a User name and P asswor d . Make up a user name and pass word (if y ou hav en’ t already) and click OK . Do not click the Cancel button or Escape [ESC] key . Clicking either of these buttons will pre vent y ou from lo gging into the netw ork. If th ...

  • Linksys USB100H1 - page 21

    Linksys HomeLink™ Series 18 Sharing Y our Files and Printers in Windows 98 Overview By sharing your f iles and printers, other PCs on your netw ork will be able to access the resources on your PC. Before sharing your f iles and printers, you should prepare your computer to be used with an y f ile ser vers that ma y be on the netw ork. If you are ...

  • Linksys USB100H1 - page 22

    Phoneline + 10/100 USB Network Adapter 7. When you're done, click on the A pply button, follo w ed by OK . Repeat steps 1-7 for any dri ve or folder y ou desire to share on the netw ork. Y ou ha ve successfull y enab led File Sharing on your PC. Y our selected driv es or folders can no w be accessed by other netw ork users. If a user tries to ...

  • Linksys USB100H1 - page 23

    Linksys HomeLink™ Series 20 Windows 2000 Installation & Setup Overview After ph ysicall y installing the Phoneline + 10/100 USB Network Adapter in your computer , follo w these instr uctions to install the netw ork dri ver . The installation procedure for the netw ork driver could v ar y slightly depending on which v ersion of W indo ws 2000 ...

  • Linksys USB100H1 - page 24

    Phoneline + 10/100 USB Network Adapter 21 3. The Install Har dwar e Device Driver s dialog bo x will appear . When Linksys USB Adapter is displa yed , select “Sear ch f or a suitable driver f or my device (Recommended)” . Click Ne xt . 5. The Locate Driver Files dialo g box will appear . Select the “Floppy disk drives” option and insert the ...

  • Linksys USB100H1 - page 25

    Linksys HomeLink™ Series 6. The Driver F ile Searc h Results dialog bo x will appear . Click Next . 7. The Completing the F ound New Har dwar e W izard dialo g box will appear . The follo wing adapter name will be shown: Linksys EtherF ast 1/10/100 USB Networ k Adapter . Click Finish . 8. Remo ve the Pro gram Disk from the floppy dri ve. The USB ...

  • Linksys USB100H1 - page 26

    Phoneline + 10/100 USB Network Adapter Troubleshooting 1. Windows doesn't detect new hardware with the HomeLink Adapter hardware installed, or it continues to detect the adapter each time I restart the PC. • Y ou might not hav e installed the adapter cor rectly or securel y into the appropriate port of your computer . Check that the adapter ...

  • Linksys USB100H1 - page 27

    Linksys HomeLink™ Series • T ry connecting your PCs using only the phone wire pro vided with the HomeLink adapter . Disconnect your PCs from an y phone jacks and remo ve an y telephone, modem, or other device that y ou hav e connected to the HomeLink adapters. • If the PCs are far a w a y from each other, bring them close to each other and tr ...

  • Linksys USB100H1 - page 28

    Phoneline + 10/100 USB Network Adapter click on Start , Settings , Control P anel , then open Netw ork and click on the Conf iguration tab . Highlight IPX/SPX-compatible Pr otocol (only one of them) and click on Pr operties . • Click on the NetBIOS tab . Put a check next to I want to ena ble NetBIOS o ver IPX/SPX and click OK . Click OK again. ? ...

  • Linksys USB100H1 - page 29

    Linksys HomeLink™ Series 26 Appendix Client for Microsoft Setup for Windows 98 If you are installing the Phoneline + 10/100 USB Netw ork Adapter in a W indows 98 PC that y ou plan on logging into a NT domain server , follo w the directions belo w . 1. Start up W indo ws. Click on Start , Settings , then Contr ol P anel . Double- click on Netw ork ...

  • Linksys USB100H1 - page 30

    Phoneline + 10/100 USB Network Adapter 27 Novell NetW are 3.x Client Setup for Windows 98 The instructions below e xplain how to set up the re gular Nov ell NetW are 3.x client for use on a W indows 98 PC. 1. F ollo w the Windo ws 98 setup instructions. 2. Start up W indo ws 98. Click on Start , Settings , then Contr ol P anel . Double-click on Net ...

  • Linksys USB100H1 - page 31

    Linksys HomeLink™ Series 28 Starting Over in Windows 98 If you e xperience installation diff iculties, you ma y need to re-install all of the W indows netw orking components from scratch. The instructions below explain ho w to giv e your PC a clean sw eep so that you can retry the USB Netw ork Adapter’ s software installation. 1. At the desktop ...

  • Linksys USB100H1 - page 32

    Phoneline + 10/100 USB Network Adapter 29 4. Remov e any instance of the name Linksys in the bo x. This includes IPX/SPX…Linksys , NetBEUI…Linksys , and TCP/IP…Linksys . Also remo v e Client for Micr osoft Networ ks , Client for NetW ar e Networ ks , and F ile and Printer Sharing for Micr osoft Networ ks . In some cases, remo ving one of thes ...

  • Linksys USB100H1 - page 33

    Linksys HomeLink™ Series 30 5. F or PCs with Dial-Up Netw orking and/or an A OL adapter, remo ve an y instance of the name Linksys, all IPX/SPX protocols, all NetBEUI, all Clients, and File and Printer Sharing for Microsoft Netw orks. Do not remo ve Dial-Up Adapter , A OL Adapter , TCP/IP-Compatib le Pr otocol- A OL Adapter or TCP/IP-Compatible P ...

  • Linksys USB100H1 - page 34

    Phoneline + 10/100 USB Network Adapter 31 8. If Netw ork Adapter s is listed , then expand it b y clicking on the plus [+] sign and remo ve all de vices with the name Linksys in its description. (If at an y point you are ask ed to restart the computer, click No ). 9. If Other Devices is listed , click the plus [+] sign beside it. Remo ve Linksys Et ...

  • Linksys USB100H1 - page 35

    Linksys HomeLink™ Series 32 Starting Over in Windows 2000 1. Click the Start button, choose Settings , choose Control P anel , then dou- ble-click the System icon. The System Pr operties window will open. 2. Choose the Hard w ar e tab . 3. Click the De vice Manager button. The Device Manag er windo w will open. 4. Click the plus sign (+) beside N ...

  • Linksys USB100H1 - page 36

    Phoneline + 10/100 USB Network Adapter 33 5. Right-click on Linksys EtherF ast 1/10/100 USB Networ k Adapter . A context menu should open (see the e xample belo w). 6. First, choose Disable . 7. When asked if you w ant to disable the de vice, click Ye s . 8. Right-click on the Linksys EtherF ast 1/10/100 USB Netw ork Adapter again. This time, selec ...

  • Linksys USB100H1 - page 37

    Linksys HomeLink™ Series 34 Manually Installing Network Components in Windows 98 There ma y be times when you will need to manuall y install missing W indo ws netw orking components. 1. Click on Start , Settings , then Control P anel . 2. Double-click the Netw ork icon. The Netw ork window appears. 3. Click the Conf iguration tab . Make sure that ...

  • Linksys USB100H1 - page 38

    Phoneline + 10/100 USB Network Adapter 35 IPX/SPX-compatible Protocol Click the Add button. Choose Pr otocol and click the Add button. Select Manufactur er and choose Microsoft . Under the Netw ork Protocol box, high- light IPX/SPX-compatible pr otocol . Click OK .The computer will begin cop ying f iles to your system. When the installation is comp ...

  • Linksys USB100H1 - page 39

    Linksys HomeLink™ Series 36 T wisted-Pair Cabling There are different grades, or categories, of twisted-pair cab ling. Category 5 is the most reliable and is highl y recommended. Category 3 is a good second choice. Straight-through cables are used for connecting computers to a hub . Crosso ver cables are used for connecting a hub to another hub ( ...

  • Linksys USB100H1 - page 40

    Phoneline + 10/100 USB Network Adapter 37 • Straight-Through Cabling •Cross-Over Cabling Crimping Y our Own Network Cables usb100h1 April 2000.qxd 4/4/00 11:18 AM Page 37 ...

  • Linksys USB100H1 - page 41

    Linksys HomeLink™ Series 38 T elephone Cabling The telephone cables y ou use can be either crosso ver or straight-through cables. Standard telephone cab les like the ones you use e ver yda y in your home should do the job . usb100h1 April 2000.qxd 4/4/00 11:18 AM Page 38 ...

  • Linksys USB100H1 - page 42

    Phoneline + 10/100 USB Network Adapter Specifications Model Number: USB100H1 Standards: IEEE 802.3 IEEE 802.3u, HPN A 1.1, USB v1.0 or higher Protocol: CSMA/CD P or ts: 1 USB T ype B P ort 2 RJ-11 Standard Modular T elephone P or ts (W ith Pass-Through) 1 10BaseT/100BaseTX Auto-Sensing RJ-45 RJ-11 and RJ-45 P or ts are Mutually Exclusi ve Speed: 1M ...

  • Linksys USB100H1 - page 43

    Linksys HomeLink™ Series Customer Support F or help with the installation or operation of your HomeLink Phoneline + 10/100 USB Netw ork Adapter, contact Linksys Customer Support at one of the phone numbers or Internet addresses below . Customer Support 800-326-7114 949-261-1288 Fa x 949-261-8868 E-mail support@linksys.com We b http://www .linksys ...

  • Linksys USB100H1 - page 44

    © Copyright 2000 Linksys, All Rights Reser ved. Printed in the USA. http://www .linksys.com usb100h1 April 2000.qxd 4/4/00 11:18 AM Page 41 ...

Fabricant Linksys Catégorie Network Cables

Les documents que nous recevons du fabricant de l'appareilLinksys USB100H1 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Linksys
- manuels d’utilisations USB100H1
- fiches produit Linksys
- dépliants
- ou étiquettes-énergie Linksys USB100H1
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Linksys USB100H1.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Linksys USB100H1, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Linksys USB100H1. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Linksys USB100H1.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Linksys USB100H1, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Linksys USB100H1 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Linksys USB100H1.

Le manuel d’utilisation complet Linksys, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Linksys USB100H1 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Linksys USB100H1, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lLinksys USB100H1 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Linksys USB100H1 - qui devraient nous aider dans les premières étapes lors de l'utilisation Linksys USB100H1
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Linksys USB100H1
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Linksys USB100H1 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Linksys USB100H1?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Linksys USB100H1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Linksys USB100H1 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)