-
Nilfisk-ALTO 530cc - page 1
Form No. 70069A 7/99 Clarke Technology Printed in th e U.S.A. READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your ALTO machine could result in injury to you or to other personnel; damage to the machi ...
-
Nilfisk-ALTO 530cc - page 2
Page -2- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual T able of Contents Important Safety Instructions .................................................................................. 5 Grounding Instructions ............................................................................................ 8 General Diagram and Parts Lis ...
-
Nilfisk-ALTO 530cc - page 3
Page -3- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual T able of Contents Advertencias ........................................................................................................... 6 Instrucciones Para La Conexion Electrica De Maquina ........................................... 8 Diagrama General/Lista de Partes ........ ...
-
Nilfisk-ALTO 530cc - page 4
Page -4- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual T able of Contents Importantes Mesures De Sécurité .......................................................................... 7 Instructions Visant La Mise A La T erre .................................................................... 9 Diagramme Generale/Liste Des Pieces .... ...
-
Nilfisk-ALTO 530cc - page 5
Page -5- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual IMPORT ANT SAFETY INSTRUCTIONS WHEN USING AN ELECTRICAL UPRIGHT VACUUM CLEANER, BASIC PRECAUTIONS SHOULD BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING VACUUM CLEANER. SA VE THESE INSTRUCTIONS FOR FUTURE REFERENCE. W ARNING: T o reduce the risk of fire, e ...
-
Nilfisk-ALTO 530cc - page 6
Page -6- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual ADVERTENCIAS AL UTILIZAR SU BARREDORA, SE DEBEN SEGUIR LAS SIGUIENTES PRECAUCIONES. LEA TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR SU BARREDORA. GUARDE ESTE MANUAL P ARA FUTURAS REFERENCIAS PRECAUCIONES: Para reducir el riesgo de fuego, choque eléctrico o heridas: 1. No se use en ...
-
Nilfisk-ALTO 530cc - page 7
Page -7- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual IMPROT ANTES MESURES DE SÉCURITÉ L'UTILISATION D'UN ASPIRATEUR ELECTRIQUE DEMANDE CERTAINES PRECAUTIONS. LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER CET ASPIRATEUR. CONSERVER CES INSTRUCTIONS A VERTISSEMENT : Pour reduire las risques d'incendie, de cho ...
-
Nilfisk-ALTO 530cc - page 8
Page -8- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual INSTRUCCIONES PARA LA CONEXION ELECTRICA DE LA MAQUINA La máquina debe ser puesta a tierra. En caso de mal funcionamiento o de avería, el hilo de tierra es un camino de menor resistencia que permite el paso de corriente ; por lo cual se reduce el riesgo de choque eléctrico. La ...
-
Nilfisk-ALTO 530cc - page 9
Page -9- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual INSTRUCTIONS VISANT LA MISE A LA TERRE Cet appareil doit être mis à la terre. En cas de défaillance ou de panne éventuelles, la mise à la terre fournit au courant un chemin de moindre résistance quI réduit le risque de choc électrique. Cet appareil est pourvu d'un cor ...
-
Nilfisk-ALTO 530cc - page 10
Page -10- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual GENERAL DIAGRAM DIAGRAMA GENERAL DIAGRAMME GENERALE 1. Cord Hook 2. Upper Handle Tube 3. Nut & Bolt 4. Lower Handle Tube 5. Nut & Bolt 6. Height Adjustment 7. Bag Inlet 8. Bag Support 9. Handle Release Pedal 10. Bag 1 1. Spring Bag Hook 12 . 35 Foot Line Cord 13 . 3 Wire ...
-
Nilfisk-ALTO 530cc - page 11
Page -11- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual HOW TO ASSEMBLE CAUTION: Fully assemble the unit before using. Hardware Package: The package contains two nuts and bolts, one screw and one spring. 1. Assemble Lower Handle Attach lower handle over socket, align holes and fasten with bolt and internally threaded nut provided in h ...
-
Nilfisk-ALTO 530cc - page 12
COMO ENSAMBLAR PRECAUCION: Antes de utilizar su unidad, ensámblela completamente. Paquette: El paquette contiene dos tornillos y tuercas, una pija y un resorte. 1. Ensamble el tubo interior Asegure el tubo inferior al socket, alinie los aqujeros y asegure con el tornillo y la tuerca incluidos en el paquete. 2. Coloque el tubo superior sobre el tub ...
-
Nilfisk-ALTO 530cc - page 13
COMMENT L'ASSEMBLER PRECAUTION: Avan d'utiliser son appareil, l'assambler complétement. Emballage: L'emballage contient deux vis et écrous, une pige et une ressort. 1. Assembler le tube inférieur . Fixen le tube inférieur sur le manchon, aligner les trous et fixet avec la vis et l'écrou inclus dans l'emballage. 2. ...
-
Nilfisk-ALTO 530cc - page 14
Page -14- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual HOW TO USE (See Fig. 10) 1. Remove electrical cord from hook and plug into electrical outlet. 2. Slide height adjustment to the desired setting. 3. Press the handle release pedal and pull the handle to the desired position, the unit will turn on auto- matically when handle is pul ...
-
Nilfisk-ALTO 530cc - page 15
Page -15- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual COMO UTILIZARSE (Fig. 10) 1. Desenrolle el cordón eléctrico y conéctelo a un tomacorriente de 120V , 60Hz. 2. Deslice la perilla de ajuste de altura a la altura deseada. 3. Presione el pedal de retén manija y mueva la manija a la posición deseada. La unidad encenderá autom? ...
-
Nilfisk-ALTO 530cc - page 16
Page -16- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual HOW TO CHANGE DISPOSABLE P APER BAG How to Change Disposable Paper Bag (Optional Accessory - See page 7, #4) Disconnect unit from electrical outlet before changing bag. Change the dust bag frequently . Some fine particles can restrict airflow very quickly and will decrease perfor ...
-
Nilfisk-ALTO 530cc - page 17
Page -17- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual COMO CAMBIAR LA BOLSA DE P APEL Como cambiar la bolsa de papel (Accesorio Opcional- pagina 7, #4) Desconecte la unidad antes de cambiar la bolsa. Cambie la bolsa de papel frecuentemente, algunas particulas muy finas pueden restringir el paso del aire y disminuir el poder de succi ...
-
Nilfisk-ALTO 530cc - page 18
Page -18- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual HOW TO REPLACE BRUSH ROLL BEL T NOTE: Turn off the switch and unplug the electrical cord before replacing belt. Belt can become hot during normal use. T o prevent injury , avoid touching the belt and motor nut when it is hot. CAUTION: Improper installation of the brush roll or br ...
-
Nilfisk-ALTO 530cc - page 19
Page -19- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual COMO REPONER LA BANDA DE CEPILLO GIRA TORIO NOT A: Apague la unidad y desconéctela antes de sustituir la banda. La banda puede calentarse durante el uso normal. Para evitar lesiones, evite tocar la banda y la tuerca del motor cuando esté caliente. PRECAUCION: La instalación in ...
-
Nilfisk-ALTO 530cc - page 20
Page -20- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual HOW TO REPLACE MOTOR IMPORT ANT : Disconnect machine before replacing motor . 1 . Detach bag (1). 2. Remove screw (2) and nut (3) at bottom of handle tube. 3. Press the handle release pedal (9) and pull handle down to horizontal position. 4 . Remove handle tube from socket. 5 . R ...
-
Nilfisk-ALTO 530cc - page 21
Page -21- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual COMO REEMPLAZAR EL MOTOR IMPORT ANTE: Desconecte la máquina antes de reemplazar el motor . 1. Desmonte la bolsa (1). 2. Quitar el tornillo y la tuerca de la base del tubo (2, 3). 3. Presione el pedal de retén manija (9) y baje la manija a la posicion horizontal. 4. Quite el tub ...
-
Nilfisk-ALTO 530cc - page 22
NOTES ...
-
Nilfisk-ALTO 530cc - page 23
AL T O ® PR ODUCT SUPPORT BRANCHES PRODUCTION F A CILITIES AL T O Danmark A/S, Aalborg Blytaekkervej 2 DK-9000 Aalborg +45 72 18 21 00 AL T O Danmar k A/S, Hadsund Industrikvar teret DK-9560 Hadsund +45 72 18 21 00 SALES SUBSIDIARIES AL T O Canada Ltd., Rexdale Ontario 24 Constellation Ct. (416) 675-5830 AL T O Overseas Inc., Sydne y (A ustr alia) ...
-
Nilfisk-ALTO 530cc - page 24
CLARKE TECHNOLOGY W ARRANTY This Clarke T echnology Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year from the date of purchase, when operated and maintained in accordance with Clarke T echnology's Maintenance and Operations instructions. This w ...
-
Nilfisk-ALTO 530cc - page 25
Form No. 70070A 7/99 Clarke Technology Printed in th e U.S.A. READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your ALTO machine could result in injury to you or to other personnel; damage to the machi ...
-
Nilfisk-ALTO 530cc - page 26
Page -2- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual T able of Contents Final T est for Product Safety .................................................................................. 3 Replacement Procedures ....................................................................................... 3 T o Disassemble the Motor ....... ...
-
Nilfisk-ALTO 530cc - page 27
Page -3- CLARKE TECHNOLOGY 539 Upright Vacuum Operator's Manual FINAL TEST FOR PRODUCT SAFETY At the completion of any repairs the product should be electrically tested for running and electric strength as follows: Electric Strength 1. Set hi-pot test meter to 1500 volts. 2. Product switch to ON-position. 3. T ouch one probe of tester to one b ...
-
Nilfisk-ALTO 530cc - page 28
Page -4- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual REPLACEMENT PROCEDURES (cont.) 11 . T o Replace Handle Socket (24-I). a. Remove hood as in step 7. b. Remove handle release pedal as in step 10. c . Remove "C" washers (17-I) from socket bolt (18-I) pull out bolt and remove socket. 12. T o Replace Handle Position Cam (27 ...
-
Nilfisk-ALTO 530cc - page 29
Page -5- CLARKE TECHNOLOGY 539 Upright Vacuum Operator's Manual CLARKE TECHNOLOGY 530 Upright Vacuum External Parts 7/99 Ref. Part No. Description Q t y 1 50037A Handle Grip 1 2 A 50038A Line Cord Assembly, 3W/120v 1 2A 52092A u Line cord Assembly, 3W/230v 1 3 50039A Cord Retainer 1 4 962731 Screw Type "A" #8 x ½ 1 5 50040A Pop Rive ...
-
Nilfisk-ALTO 530cc - page 30
Page -6- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual 530 Upright Vacuum Internal Parts 7/99 CLARKE TECHNOLOGY 1 2 3 4 5 15 61 62 63 61 62 4 5 26 20 22 24 22A 22B 25 64 65 63 27 28 29 30 31 32 19 16 17 1 19 18 17 16 60 8 10 11 12 13 42 43 59 48 49 50 44 45 59 40 47 46 42 43 41 39 36 35 34 33 8 37 37A 37B 53 53A 53B 53C 58 57 53C 53B ...
-
Nilfisk-ALTO 530cc - page 31
Page -7- CLARKE TECHNOLOGY 539 Upright Vacuum Operator's Manual Ref. Part No. Description Qty. 1 50081A Air Duct Gasket 1 2 50082A Right Air Duct 1 3 50084A Motor Assembly, 120v 1 3 50085A Motor Assembly, 230v 1 4 962027 Screw, #8-32 x ½ 4 5 50087A Flat W ashe r .2 08 x ½ 4 8 50090A Rear Wheel Hub Asm. 2 10 85313C Screw, #6-32 x 3 / 8 3 1 1 ...
-
Nilfisk-ALTO 530cc - page 32
Page -8- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual Ref. Part No. Description Q t y 1 50219A Motor Cover Assembly 1 1 A 50220A Motor Cover 1 1 B 50221A Nut #8-32 2 2 962731 Screw, 8 x ½ 4 3 50222A Brush Holder Assembly 2 4 50223A Brush Holder Support 2 5 85303A Screw #8-32 x 3/8 2 7 50224A Washer .850 x .017 1 8 52088A u Armature ...
-
Nilfisk-ALTO 530cc - page 33
Page -9- CLARKE TECHNOLOGY 539 Upright Vacuum Operator's Manual 530 Upright Vacuum Wiring Diagram 8/98 CLARKE TECHNOLOGY TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Motor does not run. 1) Not firmly plugged in. 1) Check attachement plug. 2) Bad On-Off switch. 2) Replace switch. 3) Line open. 3) Replace cord. 4) Motor open. 4) Check ...
-
Nilfisk-ALTO 530cc - page 34
530cc Upright Vacuum Assembly Drawing and Parts List 7/99 CLARKE TECHNOLOGY Ref. Part No. Description Q t y 1 50807A Bag Spring 1 2 50808A Bag Clip 1 3 50809A Bag Assembly 1 4 50810A Cup Frame 1 5 85303A Screw, 8-32 x 3/8 2 6 50087A Flat Washer 2 7 50221A Hex Nut, 8-32 2 8 50811A Clamp 1 9 50812A Cup Gasket 1 1 0 50813A Cup Assembly 1 1 1 50814A Up ...
-
Nilfisk-ALTO 530cc - page 35
AL T O ® PR ODUCT SUPPORT BRANCHES PRODUCTION F A CILITIES AL TO Danmark A/S , Aalborg Blytaekkervej 2 DK-9000 Aalborg +45 72 18 21 00 AL T O Danmar k A/S, Hadsund Industrikvar teret DK-9560 Hadsund +45 72 18 21 00 SALES SUBSIDIARIES AL T O Canada Ltd., Rexdale Ontario 24 Constellation Ct. (416) 675-5830 AL T O Ov erseas Inc., Sydney (A ustralia) ...
-
Nilfisk-ALTO 530cc - page 36
Page -12- CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual CLARKE TECHNOLOGY W ARRANTY This Clarke T echnology Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year from the date of purchase, when operated and maintained in accordance with Cla ...
Avez-vous une question à propos de Nilfisk-ALTO 530cc?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Nilfisk-ALTO 530cc, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Nilfisk-ALTO 530cc il est probable qu’il a envie de partager la façon de le résoudre.