Manuel d’utilisation Uniden UBC355XLT

68 pages 0.79 mb
Télécharger

Aller à la page of 68

Summary
  • Uniden UBC355XLT - page 1

    UBC355XL T Scanner ...

  • Uniden UBC355XLT - page 2

    2 IMPORT ANT INFORMA TION PRECA UTIONS Before y ou use this scanner , please observe the following: W arning Uniden does not represent this unit t o be waterproof . T o reduce the risk of re, electrical shocks, or damage to the unit, do not expose this unit to rain or moisture . ...

  • Uniden UBC355XLT - page 3

    3 T ABLE OF C ONTENTS IMPORT ANT INFORMA TION .................... 2 PRECA UTIONS ....................................... 2 W arning ............................................ 2 AB OUT YOU R N E W UB C355 XL T S C A NN E R . . . . . . 6 C OUNTRY MODE A USTRALIA/NEW ZEALAND ........ 6 FEA TURE SUMMARY .................................. 7 INC ...

  • Uniden UBC355XLT - page 4

    4 Adjusting Squelch .................................. 27 OPERA TING MODES .................................2 8 SCAN .............................................. 28 SEARCH ............................................ 29 SPECIAL NO TES FOR SCANNING BANKS ............ 29 Scanning Ser vice Bank T ips . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Uniden UBC355XLT - page 5

    5 Setting C ‐ O p t i o n s ....................... 4 5 Setting C ‐ O p t i o n s ....................... 4 7 Setting C ‐ C.PS O p t i o n s .......................... 4 7 Close Call T ips .................................... 48 PRIV A TE BANK ...................................... 4 9 Programming Frequencies and Channels . . . . . . . . . . ...

  • Uniden UBC355XLT - page 6

    6 A BO U T Y OU R N E W U BC 355X L T S C A N NE R The UBC355XL T comes with 8 Ser vice banks for monit or ing police, railroad , re, ambulanc e, air , marine, UHF CB and CB fr equencies. In addition, the UBC355XL T has 8 separate band searches. Y ou can also save up to 300 frequencies that are scanned along with the preset frequencies . S o whe ...

  • Uniden UBC355XLT - page 7

    7 The country mode can be switched between Australia and New Zealand as f ollows: T urn on the power while pressing down the • Hold key . The display will show the current setting; A US for A ustralian mode or nL for New Zealand mode . Pr ess • Up to change the setting. Pr ess • Prog to st ore the country mode. The scanner displays t ...

  • Uniden UBC355XLT - page 8

    8 POLICE: 340 (207 Australia mode + 133 New » Zealand mode) F actor y-prog rammed P olice frequencies with 100 open channels (shared with Railroad), allowing you to pr ogram additional police frequencies into this bank. RAILROAD: 249(241 Australia mode + 8 New » Zealand mode) F actor y-prog rammed Railroad frequencies plus an additional 100 (shar ...

  • Uniden UBC355XLT - page 9

    9 Note: The F ire and Ambulance banks shar e a single key - F ire/Ambl. Pr essing this key will toggle betw een the banks. Additional inf ormation is provided in later sections. AIR: 1,520 F actor y-programmed fr equencies which » covers the c omplete AIR band, 118.000 to 136.9875 MHz. MRN: 89 F actor y-programmed fr equencies which » cover the c ...

  • Uniden UBC355XLT - page 10

    10 Band Fr equency Co ver age (MHz) Mode Steps (kHz) Service 25 – 28 25.0000 to 27.9950 AM 5 AM Band 28- 70 28.0000 - 69.9950 FM 5 1 0 - 6 Me t er Amateur Band 70- 88 70.0000 - 88.0000 FM 12.5 VHF L ow Band 108-137 108.0000 - 136.9875 AM 12.5 Aircraft Band 137-148 137.0000 - 147.9950 FM 5 2 Meter Amateur Band 148-174 148.0000 - 174.0000 FM 6.25 V ...

  • Uniden UBC355XLT - page 11

    11 Band Fr equency Co ver age (MHz) Mode Steps (kHz) Ser vice 400-520 400.0000 - 520.0000 FM 6.25 Land Mobile Radio* 806-956 806.0000 - 956.0000 F M 12.5 800 MHz Band * This scanner cannot decode digital T V transmissions. Fr equency Band Sensitivity (Nominal) 12 dB SINAD 25.000 - 27.995 0.4 µV 28.000 - 69.9950 0.2 µV 70.0000 - 88.0000 0.2 uV 108 ...

  • Uniden UBC355XLT - page 12

    12 Fr equency Band Hum and Noise (Nominal) 25.000 - 27.995 48 dB 28.000 - 88.000 43 dB 108.0000 - 136.9875 48 dB 148.0000 - 174.0000 43 dB 400.0000 - 520.0000 42 dB 806.000 - 956.000 44 dB Fr equency Band Close Call Sensitivity (Nominal) 25.000 - 88.0000 -54 dB 108.0000 - 136.9875 -61 dB 137.0000 - 174.0000 -63 dB 400.0000 - 520.0000 -65 dB 806.000 ...

  • Uniden UBC355XLT - page 13

    13 F ixable Mobile Antenna • AC A dapter • V ehicle Power A dapter • DC Po wer Cord for har d-wiring power from your car to y our • scanner . Bracket • Screw • This Owner ’ s Manual • Other Printed Materials • If any of these items are missing or damaged , immediately contact your place of pur chase. Option ...

  • Uniden UBC355XLT - page 14

    14 Visit our online stor e via our website; ww w .uniden.com.au for Australia or www .uniden.co.nz for New Z ealand. INST ALLING THE UBC3 5 5XL T SCANNER FOR HOME USE DESKT OP INST ALL A TION Inser t the DC plug end of the AC A dapter into the DC 13.8V 1. jack on the rear panel. Plug the AC A dapter into a standard 240V AC wall outlet . 2. Pl ...

  • Uniden UBC355XLT - page 15

    15 multi-band cover age. ( Y ou can purchase this type of antenna at a local electronics store .) If the optional antenna has no cable, use 50-70 ohm coaxial • cable for lead-in. A mating plug ma y be necessary for the optional antennas. FOR MOBILE USE INCAR INST ALLA TION T emporary Mobile Installation A Vehicle P ower Adapter is pr ...

  • Uniden UBC355XLT - page 16

    16 Permanent Mobile Installation Permanently installing the UBC355XL T scanner into a vehicle involv es t wo main steps - ph ysically installing the scanner and physically c onnecting the power supply . I t does not matter which is installed rst; per form these proc edures in an order that is most appropriate f or your vehicle ’ s congurati ...

  • Uniden UBC355XLT - page 17

    17 Mount the scanner to the bracket only after the wiring has 4. been connected to the rear panel. Permanently C onnecting the Mobile Pow er Supply CAUTION: If y ou are not experienced in connecting accessories t o the vehicle fuse bo x, please see your automotive dealer f or advice on proper installation. Check the vehicle battery connections to d ...

  • Uniden UBC355XLT - page 18

    18 SCANNER OPERA TION O VERVIE W UB C355 X L T F RO N T P A N EL KEY PURPOSE Hold Pr ess this key to stop scanning or searching and to remain on the curren t frequency . “HOLD” displays on the screen. Pr ess Hold a second time to resume scanning. ...

  • Uniden UBC355XLT - page 19

    19 KEY PURPOSE Up and Down P ress these directional keys to: Manually search up or down for • frequencies while in Hold mode. Change direction of a search during • Search mode. Quickly search up or down for • frequencies (hold Up or Down key s for longer than 1 second) while in Hold mode. Privat e Scans user-programmed channels progr ...

  • Uniden UBC355XLT - page 20

    20 KEY PURPOSE Polic e/R ail Pr ess this key to scan the Police and Railroad bands. P ressing this key cycles through the frequencies in the follo wing order: P olice/Rail Ser vices - all activated • P olice department only (turn o • Railroad bank) Railroad only (turn o Police bank) • None active (turn o both Police and •? ...

  • Uniden UBC355XLT - page 21

    21 KEY PURPOSE Fir e/Ambl Pr ess this key to scan the Fire and Ambulance bands. P ressing this key c ycles through the frequencies in the f ollowing order: F ire/Ambulance - both activated • F ire only (turn o Ambulance bank) • Ambulance only (turn o F ire bank) • None active (turn o both Fir e and • Ambulance banks) NO ...

  • Uniden UBC355XLT - page 22

    22 KEY PURPOSE Close Call Pr ess this key to begin monitoring f or strong, nearby signals. P ressing this key c ycles through the frequencies in the f ollowing order: Close Call • ® Priority - CC checks for Close Call hits ev er y 2 seconds while monitoring other frequencies. Y ou will hear a slight break in rec eption while Close Call Priori ...

  • Uniden UBC355XLT - page 23

    23 KEY PURPOSE Air/Marine Pr ess this key to scan the Air and Mar ine bands. P ressing this key cycles through the frequencies in the follo wing order: Air/Marine - both activated • Air only (turn o Marine bank) • Marine only (turn o Air bank) • None active (turn o both Air and • Marine banks) UCB/CB Pr ess this key to ...

  • Uniden UBC355XLT - page 24

    24 KEY PURPOSE L/O Pr ess this key to temporarily or permanently lock out frequencies or channels from being searched or scanned. (L/O is explained in more detail in a later section.) Band Pressing this key displa ys the upper/lower limits of a band range for 3 seconds (i.e ., 400.520 ) and then begins searching that band range. Note , on the displ ...

  • Uniden UBC355XLT - page 25

    25 ITEM PURPOSE V olume/O V olume Control/ Po wer Switch T urn this control clockwise to turn on the UBC355XL T unit. Continue turning this control clockwise to adjust the volume . SQ (Squelch) Control Adjust SQ to set the scan thr eshold. When you are monit oring a single channel in Scan Hold Mode, adjust SQ to eliminate the background noise he ...

  • Uniden UBC355XLT - page 26

    26 UB C355 X L T R EA R P A NE L ITEM PURPOSE ANT BNC Antenna Connector . Insert the antenna plug here. EXT SP External Speakers. Inser t optional external speaker plug here. DC 13.8V Po wer Connection. Connect the specied AC Adapter or DC po wer cord her e. ...

  • Uniden UBC355XLT - page 27

    27 U SI N G Y OU R U B C355X L T S C A N N ER SE T UP Adjusting Squelch T o Adjust Squelch - T urn 1. SQ completely counter clockwise. Y ou should hear open squelch noise. T urn 2. SQ clockwise slowly until the sound disappears. This is the threshold point at which the incoming signal is just slightly stronger than the noise will open the squelch. ...

  • Uniden UBC355XLT - page 28

    28 OPERA TING MODES The UBC355XL T operates in two modes - Scan and Search: SCAN Scanning allows you to scan thr ough channels in various ser vice banks. Pr ess a ser vice bank key ( P olice/Rail, Fire/A mbl, Air/Marine, UCB/ CB or Privat e ) to nd an active frequency within that bank. All activated banks plus their “private ” channels ar e ...

  • Uniden UBC355XLT - page 29

    29 SEARCH Search lets you search thr ough pre -grouped bands of frequencies. Pr ess Band key to select 1 of 8 separate frequency bands to search. Pr ess the Search key to begin searching . T he scanner displays frequencies as it searches and st ops on active frequencies until that transmission ends. If no transmission resumes after 2 sec onds, the ...

  • Uniden UBC355XLT - page 30

    30 NO TE: The Police and Railroad banks shar e 100 PRIV A TE channels. These user-progr ammed channels are scanned after pre -programmed channels. Pr essing Fir e/Ambl more than once will cycle through the banks in this order: F ire/Ambulance 1. F ire 2. Ambulance 3. None 4. NO TE: The Fire and Ambulanc e banks share 100 PRIV A TE channels. These u ...

  • Uniden UBC355XLT - page 31

    31 Pr essing UCB/CB more than once will cycle through the banks in this order: UHF CB/ AM CB 1. UHF CB 2. AM CB 3. None 4. Scanning Ser vice Bank T ips If Y ou W ant to do This - Here ’ s Ho w - Begin scanning Press any service bank key ; the bank label ashes and the “ SCAN ” message moves acr oss the display screen. Scanning automatically ...

  • Uniden UBC355XLT - page 32

    32 If Y ou W ant to do This - Here ’ s Ho w - Set up multiple ser vice banks to scan Pr ess a desired service bank ’ s key until it displays. C ontinue pressing other banks’ keys until all desired banks are displayed (activated). Stop scanning Pr ess Hold . The scanner stays on the displayed channel until scanning is resumed. The bank’ s sc ...

  • Uniden UBC355XLT - page 33

    33 If Y ou W ant to do This - Here ’ s Ho w - Resume scanning (Con t.) Any bank key - If you press a di erent • bank key , you will star t scanning in that new bank and the bank label will resume ashing. L/O key - Press this key t o lock out • this frequency and step to the next frequency . Keep scanning after the UBC355XL T has s ...

  • Uniden UBC355XLT - page 34

    34 Searching Band Tips If Y ou W ant to Do This - Here ’ s Ho w - Begin searching Pr ess the Band key . T he screen displays the last known searched band and then begins searching f or an active frequency in that band. Continue after the UBC355XL T has stopped on an active channel If the UBC355XL T stops on an ac tive channel that you do not want ...

  • Uniden UBC355XLT - page 35

    35 SCREENS This section shows typical screen displays: SCANNING BANKS This screen show s UBC355XL T is ac tively scanning a displayed bank. “ SCAN “ scrolls from right to left across the screen, and the scanned bank will ash. This screen show s that the scanner has been put on HOLD to monitor frequency 487.250 on the P olice bank. ...

  • Uniden UBC355XLT - page 36

    36 SEARCHING BANDS When Band is pressed, this screen displays the band range to be searched . Press Band again (or Up / Down within 3 seconds) to see other band ranges. This SEARCH screen show s that frequency 127.81250 has been found through an upward sear ch. Pointers (  or  ) indicate the direction of the search - up or down. SPECIAL FEA T ...

  • Uniden UBC355XLT - page 37

    37 Privat e Bank • Pr ogram F requencies into Pr ogrammable Banks. • Pr ogram Lock • L OCK OUT CHANNELS / FREQUENCIES Sometimes the scanner may stop on a particular channel or frequency because of noise or other unwanted transmissions . T his featur e lets you lock out channels and frequencies y ou don’t wan t to scan. The Lock Out ...

  • Uniden UBC355XLT - page 38

    38 Permanent L ock Out Pr essing L/O twice permanently locks out the current frequency or channel. The scanner displays “L/O” for that frequency or channel and continues scanning. “L/O ” frequencies/channels can be manually restor ed; the procedure is pr ovides in this sec tion. Lock Out Limits Any of the 300 user-pr ogrammed channels can b ...

  • Uniden UBC355XLT - page 39

    39 can also lock out all channels.) If you lock out all the channels or frequencies in one of these banks, pr essing that bank key will make the scanner emit an error tone and the scanner will not scan. Lock Out Tips If Y ou W ant to Do This - Here ’ s Ho w - T emporary Lock Out W hile on a channel or frequency , press L/O once. The scanner beeps ...

  • Uniden UBC355XLT - page 40

    40 If Y ou W ant to Do This - Here ’ s Ho w - T emporary Lock Out (Con t.) Pr ess the bank you w ere scanning • to resume scanning in that bank. Pr ess a dieren t bank key to • begin scanning that new bank. Permanent L ock Out While on a channel or frequency , quickly press L/O key twice. The scanner locks out that channel or frequen ...

  • Uniden UBC355XLT - page 41

    41 If Y ou W ant to Do This - Here ’ s Ho w - Restoring a Single Locked-Out Channel or F requency (Example: Channel 12 of the Privat e bank is locked out.) Pr ess the appropriate bank key 1. ( Privat e , Police/Rail , Fir e/Ambl , Air/Marine and UCB/CB ) to start scanning the bank that has the channel or frequency you want to unlock. Pr ess 2. Ho ...

  • Uniden UBC355XLT - page 42

    42 If Y ou W ant to Do This - Here ’ s Ho w - Restoring a Single Locked-Out Channel (Con t.) “L/O” disappears to indicate that 4. Channel 12 is now unlocked and restor ed for scanning . Note: F or the fac tory preprogrammed channels , the earliest channel will be unlocked when y ou lock out more than 100 channels. Restoring All Permanen tly L ...

  • Uniden UBC355XLT - page 43

    43 If Y ou W ant to Do This - Here ’ s Ho w - Restoring All Permanently L ocked Out Channels/ F requencies (C ont.) Pr ess and hold 3. L/O for more than 2.5 seconds until you hear two beeps. All locked out channels/ 4. frequencies in that bank are now unlocked and restor ed for scanning. Note: When that bank is the Privat e bank, all locked out c ...

  • Uniden UBC355XLT - page 44

    44 Close Call O 3. Pr essing and holding the key activates Close Call Only mode. Close Call Priority Repeatedly press until the Close Call Priority icon displays. The scanner checks every 2 second for a nearby transmission. Y ou may hear a slight break in audio during this time . I f you want t o monitor only Close Call hits, hold the key for lo ...

  • Uniden UBC355XLT - page 45

    45 Setting Up Close Call Modes Pr ess and hold 1. to enter the Close Call Only mode . T he screen displays a line of dashes . Pr ess 2. again to display the Close Call menu selections: • - Select which bands Close Call will check . • - Select aler ts on/o . • - Set Pager scr een. Use the 3. Up or Down keys to scr oll through the m ...

  • Uniden UBC355XLT - page 46

    46 Band Name Fr equency (MHz) b1 Lo VHF Low Band 25.0000 - 88.0000 b2 Air AIR Band 108.0000 - 136.9875 b3 Hi VHF High Band 137.0000 - 174.0000 b4 UHF UHF Band 400.0000 - 520.0000 b5 800 800MHz Band 806.0000 - 956.0000 F rom Step 4 pr eviously , selec t 1. . The rst band selection displays: ...

  • Uniden UBC355XLT - page 47

    47 Scroll up or down to select bands for Close Call t o monitor . 2. Pr ess Prog . The scr een displays that selection and “ On .” Y ou cannot tur n o all bands. If you turn o all bands, B1 L O is automatically set to ON. Setting Options This menu contr ols whether the scanner will send an aler t tone when a Close Call signal is detected. ...

  • Uniden UBC355XLT - page 48

    48 Close Call Tips If Y ou W ant T o - Here’ s How - Scan for Close Call T ransmissions while Scanning other Banks/Bands Pr ess the key . T he Close Call icon displays. E ver y two seconds there will be a break in the scanner audio as it searches for a nearby transmission. Save a F requency F ound T hrough Close Call The scanner nds a nearby s ...

  • Uniden UBC355XLT - page 49

    49 If Y ou W ant T o - Here’ s How - Save a F requency F ound T hrough Close Call (C ont.) Pr ess any key to 2. conrm the frequency . F ollow the steps for “Programming a 3. Channel” on page 51. PRIV A TE BANK The UBC355XL T also provides 3 separat e banks to hold favorite frequencies. When you nd a fr equency that you would like to lis ...

  • Uniden UBC355XLT - page 50

    50 Programming Frequencies and Channels Up to 100 frequencies (1 fr equency per channel) can be programmed int o each of the following banks (300 frequencies combined): Polic e/R ailroad • F ire/Ambulance • Privat e • Any display ed frequenc y for these banks can be pr ogrammed into the scanner , and frequencies not curren tly displa ...

  • Uniden UBC355XLT - page 51

    51 Progr amming a Channel The follo wing steps detail how to pr ogram a frequency into a channel for a specic bank when the frequency was found while scanning or searching . In this example, the frequency was found while scanning the P olice bank. This SCAN screen show s that frequency 75.86250 has been found through a search of the active (a ...

  • Uniden UBC355XLT - page 52

    52 Pr ess the key for the bank you want to pr ogram. In this example, P olice/Rail was pressed. The screen cycles between two displays . The rst screen shows tha t channel 6 is the lowest a vailable channel on the Polic e bank (press Up or Down t o select a dierent channel) and the second screen shows that fr equency 75.86250 is available to ...

  • Uniden UBC355XLT - page 53

    53 Pr ess Prog . The scanner programs the fr equenc y into the indicated channel and then goes into SCAN HOLD mode. Pr ess Hold to release the Hold and continue scanning the rest of the prog rammed channels, starting with the channel you just programmed . Deleting a Programmed F requency (programming “000.0000”) The easiest method of deleting a ...

  • Uniden UBC355XLT - page 54

    54 F requency changes to 000.0000 and CH continues ashing. Pr ess the bank containing the channel you wish to clear . The screen displays the rst programmable channel for that bank. If that channel displays 000.0000, press Up or Down until the channel/frequency you wish to clear display s. (In this example, channel 6 contains frequency 75.862 ...

  • Uniden UBC355XLT - page 55

    55 The screen cycles between two displays . The rst scr een shows that channel 6 on the Polic e bank (75.86250) is selected and the second screen shows tha t the null frequency (000.0000) is ready to be pr ogrammed. Pr ess Prog . The screen displays a null frequency in that channel. Pr ess the bank key again to resume scanning in that bank. ...

  • Uniden UBC355XLT - page 56

    56 PROGRAM L OCK FEA TURE The UBC355XL T has a Prog ram Lock f eature to prevent ac cidentally programming entries or unauthorized pr ogramming. Pr ess and hold the Prog key for longer than 2.5 seconds to toggle Pr ogram Lock on and o . Progr am Lock is available in the following modes: Scan/Scan Hold • Band Search/Band Search Hold • P ...

  • Uniden UBC355XLT - page 57

    57 TROUBLESHOO TING GUIDE PROBLEM SOL UTION Scanner won ’t work T r y one of these options: Check the connections at both ends of • the AC adapter . T urn on the wall switch of your room. • Y ou could be using an outlet controlled by the wall switch. Mov e the AC adapter to another wall outlet. Check the connections at both ends of •? ...

  • Uniden UBC355XLT - page 58

    58 PROBLEM SOL UTION Improper Reception T r y one of these options: Check the antenna and its connection. • Move the scanner . • Y ou may be in a fringe area. This • may requir e an optional multi-band antenna. Check with your dealer or local electronics store . Scan won ’t stop T r y one of these options: Check and adjust Squelch ...

  • Uniden UBC355XLT - page 59

    59 PROBLEM SOL UTION Scan won ’t star t T ry one of these options: Pr ess the bank key again. • Adjust the Squelch Contr ol. • Pr ogram frequencies int o the bank • before using (f or PRIV A TE bank). Check to see if all channels are locked • out. It is possible that none of the programmed fr equencies are ac tive at the time. ...

  • Uniden UBC355XLT - page 60

    60 GENERAL PRODUCT C ARE T urn the scanner o before disconnecting the power . Always pr ess each keypad button rmly until you hear the entr y tone for that key en tr y . L OCA TION If strong interference or electrical noise is received , relocate the scanner or its antenna awa y from the source of the noise. A higher elevation, if possible, m ...

  • Uniden UBC355XLT - page 61

    61 Clean the outside of the scanner with a soft cloth. T o prevent scratches , do not use abrasive cleaners or solven ts. Be careful not to rub the L CD window . Do not use excessive amounts of wat er . REP AIRS Do not attempt any r epair . The scanner contains no serviceable parts. V isit the customer suppor t page on our website; www.uniden.com.a ...

  • Uniden UBC355XLT - page 62

    62 TECHNICAL SPECIFICA TIONS Size: 132mm ( W ) x 142mm (D) x 42mm (H) W eight: 640g Operating T emperatur e: – 20ºC (– 4ºF) to + 60ºC (+ 140ºF) Po wer Requirements: DC 13.8V Certied in accordance with FC C Rules and Regulations Part 15 Sub-par t C as of date of manufacture. Banks: 9 banks total (8 Service banks / 1 Private bank) • P ...

  • Uniden UBC355XLT - page 63

    63 shared with F ire Air (AIR): 1,520 P reprogrammed. • Marine (MRN): 89 Prepr ogrammed. • UHF CB (UCB): 40 programmed • AM CB (CB): 40 (40 A ustralia mode, 40 New Z ealand mode) • programmed . PRIV A TE: 100 channels fully user-programmable. • Search Band: 8 searchable bands: Scan Rate: 50 channels/second Search Rate: 60 s ...

  • Uniden UBC355XLT - page 64

    64 63 O NE Y EAR lIMITED W ARRANT Y Ub C355 X l T S CANNER Please keep your sales docket as it pro vides evidence of warranty . Important: Evidence of original purchase is r equired for w arranty ser vice. W arrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited W ar ranty is only valid in the original country of pu ...

  • Uniden UBC355XLT - page 65

    65 63 O NE Y EAR lIMITED W ARRANT Y Ub C355 X l T S CANNER Please keep your sales docket as it pr ovides evidence of warranty . Important: Evidence of original purchase is r equired for w arranty ser vice. W arrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited W ar ranty is only valid in the original country of pu ...

  • Uniden UBC355XLT - page 66

    66 64 (C ) Improperly installed, (D) R epaired by someone other than an authoriz ed Uniden Repair Agent for a defect or malfunction covered b y this warranty, (E) Used in conjunction with any equipment or par ts or as par t of a system not manufactured by Uniden, or (F) Where the Serial Number label of the product has been removed or damaged beyond ...

  • Uniden UBC355XLT - page 67

    67 64 (C ) Improperly installed, (D) R epaired by someone other than an authoriz ed Uniden Repair Agent for a defect or malfunction covered b y this warranty, (E) Used in conjunction with any equipment or par ts or as par t of a system not manufactured by Uniden, or (F) Where the Serial Number label of the product has been removed or damaged beyond ...

  • Uniden UBC355XLT - page 68

    Thank y ou for b uying a uniden producT . © 2010 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in PRC . UBZZ01362AZ(0) ...

Fabricant Uniden Catégorie Scanner

Les documents que nous recevons du fabricant de l'appareilUniden UBC355XLT peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Uniden
- manuels d’utilisations UBC355XLT
- fiches produit Uniden
- dépliants
- ou étiquettes-énergie Uniden UBC355XLT
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Uniden UBC355XLT.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Uniden UBC355XLT, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Uniden UBC355XLT. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Uniden UBC355XLT.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Uniden UBC355XLT, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Uniden UBC355XLT par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Uniden UBC355XLT.

Le manuel d’utilisation complet Uniden, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Uniden UBC355XLT - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Uniden UBC355XLT, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lUniden UBC355XLT qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Uniden UBC355XLT - qui devraient nous aider dans les premières étapes lors de l'utilisation Uniden UBC355XLT
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Uniden UBC355XLT
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Uniden UBC355XLT dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Uniden UBC355XLT?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Uniden UBC355XLT, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Uniden UBC355XLT il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)