-
TP-Link TL-PS310U - page 1
TL-PS310U Single USB 2.0 Port MFP and Storage Server REV3.0.0 1910010947 ...
-
TP-Link TL-PS310U - page 2
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product nam es are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or by any means or used to make any derivative ...
-
TP-Link TL-PS310U - page 3
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interference in a residential inst allation. This eq uipment generates, uses and can radiate radio frequency energy and, if ...
-
TP-Link TL-PS310U - page 4
Safety Information z When product has power button, the powe r button is one of the way to shut off the product; when there is no power b utton, the only way to co mpletely shut off power is to disconnect the product or the power adapter from the power source. z Don’t disassemble the product, or make repairs yourself. You run the ri sk of electri ...
-
TP-Link TL-PS310U - page 5
TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: Single USB 2.0 Port MFP and Storage Print Server Model No.: TL-PS310U T rademark: TP ...
-
TP-Link TL-PS310U - page 6
Contents Chapter 1 Introduc tion ......................................................................................... 1 1.1 Product Ov ervi ew ........................................................................................................... 1 1.2 Network M anagemen t ................................................................... ...
-
TP-Link TL-PS310U - page 7
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 1 Chapter 1 Introduction 1.1 Product Overview MFP and Storage Server enhances capability by letti ng you place your USB devices at convenient locations directly on the Ethernet network. It’s designed to connect your USB printers, MFP, and USB storage devices to your network, allowing all ...
-
TP-Link TL-PS310U - page 8
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 2 2. Connect the MFP and Storage Server to the rout er or switch/HUB with the Ethernet cable. 3. Connect the power adapt er to the MFP and St orage Server. When the LINK LED lights up, the MFP and Storage Server is correct ly connected to the network. ...
-
TP-Link TL-PS310U - page 9
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 3 Chapter 2 Software Installation 2.1 For Windows XP Users 1. Insert the setup CD into your CD-drive. The auto-run program will be started. Select the model. 2. Choose your operati ng system to install all software programs. ...
-
TP-Link TL-PS310U - page 10
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 4 3. When the installation completed, click Finish to close the installation wizard. 4. Choose “ Yes, I want to restart m y computer now. ” to restart your computer. 5. After rebooting, you will see a new icon on your desktop. Double-click t he icon and it will bring up the MFP and Sto ...
-
TP-Link TL-PS310U - page 11
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 5 6. The setup utility will show up and display all the active MFP and Stor age Servers on your network. In the screen, you w ill see the product listed as “ TL-PS310U C7641B (192.168.0.10) ”. “C7641B” is the last 6 digits of the MF P and Storage Server’s MAC address, and the “ ...
-
TP-Link TL-PS310U - page 12
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 6 8. Configure the IP address of the print server according to your netwo rk (take 192.168.1.93 for example) and then click Set . Then open the page again and click Restart Server to make the change take effect. 9. Then you will see the IP address of the print server has been changed. ...
-
TP-Link TL-PS310U - page 13
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 7 2.1.1 Connecting to a USB Device 1. Connect the USB cable on your USB device to the USB port of the MFP and Storage Server, and make sure both the USB device and the MF P and Storage Server ar e powered on. The USB device will then show up on the MFP and Storage Server utility as a blue ...
-
TP-Link TL-PS310U - page 14
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 8 3. Once the USB device has been connected, the blue icon ( ) will turn green ( ) to indicate that the connection has been established. The USB device no w becomes available on your computer, and you can use this US B device as if it was directly connected to your computer. 2.1.2 Connecti ...
-
TP-Link TL-PS310U - page 15
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 9 ) Note: If your printer does not show up on the list, pl ease try to disconnect and reconnect the printer t o the USB port of the MFP and Storage Server. Also, please make sure the MFP and Storage Server and your printer are powered o n. 2. The printer will be detect ed as if it was plug ...
-
TP-Link TL-PS310U - page 16
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 10 2.1.3 Disconnecting a USB Device To disconnect a USB device, simp ly click on the connected USB dev ice on the list of the MFP and Storage Server setup utility, and click the Disconnect Device button. The device will then no longer stay connected to your computer; how ev er, you may rec ...
-
TP-Link TL-PS310U - page 17
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 11 2. To send the courteous message, right-click on the USB device and select “ Request Disconnect Device ”. A message will then be sent to t he user requesting that the user disconnect from the USB device. ) Note: If the occupying user denies this request, then you will not be able to ...
-
TP-Link TL-PS310U - page 18
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 12 2.1.5 Setting the MFP and Storage Server by Setup Utility 1. To configure the MFP and Storage S erver by setup utility, right-clic k on the MFP and Storage Server and select “ Server Configurations ”. 2. The Server Configurations page will be displayed. You can set the server name, ...
-
TP-Link TL-PS310U - page 19
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 13 2.2 For Windows Vista/7/8 Users 1. Insert the setup CD into your CD-drive. The aut o-run program will be started. Select the model. 2. Choose your operati ng system to install all software programs. 3. The installation wizard will start the installa tion process. During the installation ...
-
TP-Link TL-PS310U - page 20
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 14 4. Click Finish to complete the installation process. 5. Once the installation process has been comple ted, a new icon will be shown on Desktop. Double-click on it for the first time execution. 2.2.1 Connecting to a USB Device 1. After you ha ve successfully installed the MFP and Storag ...
-
TP-Link TL-PS310U - page 21
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 15 2. When the USB device is connec ted, the MFP and Storage Server will detect the connection of the USB device, and an icon of t he USB device will show up. 3. Select the USB device that you want to connect to, right-click on it and select “ Connect Device ”, or click the Connect Dev ...
-
TP-Link TL-PS310U - page 22
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 16 2.2.2 Setting up Auto Connection/Auto Disconnection 1. Select the device that you want to set up auto connection feature. 2. Right-click the device to show t he shortcut menu, and then you can: z Select the Connect Device Automatically option so that the device will be connected automat ...
-
TP-Link TL-PS310U - page 23
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 17 ...
-
TP-Link TL-PS310U - page 24
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 18 Chapter 3 Web Management Interface 3.1 Accessing the Web Page To access Web management interface in Windows XP/Vista/7/8, double-click the “ TL-PS310U-C7641B ” item in the MFP and Storage Server se tup utility. The oper ating system will open the browser automatically and load the m ...
-
TP-Link TL-PS310U - page 25
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 19 3.2 Web Page Description Status: ¾ Server Information: Displays the information of the MFP and Storage Server. ...
-
TP-Link TL-PS310U - page 26
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 20 ¾ Device Information: Displays the information of the connected USB device(s). ...
-
TP-Link TL-PS310U - page 27
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 21 ¾ TCP/IP: Displays the current TCP/IP setti ngs of the MFP and Storage Server. ...
-
TP-Link TL-PS310U - page 28
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 22 Setup: ¾ Server Settings: You can add or change any existing password on the MFP and Storag e Server in this screen. By default, the MF P and Storage Server does not come with a password. ...
-
TP-Link TL-PS310U - page 29
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 23 ¾ TCP/IP: You can change the TCP/TP se ttings according to your net work specification. If you would like to give the MFP and Storage Server a static IP address, you will need to disable DHCP in the DHCP setting field. Once DHCP is disabled, enter the desired IP address on the IP addre ...
-
TP-Link TL-PS310U - page 30
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 24 Misc: ¾ Factory Default: This screen allows you to restore the MFP and Storage Server to its factory default. Please note that if t he MFP and Storage Server has a set password, you will need to enter it into the password field. ...
-
TP-Link TL-PS310U - page 31
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 25 ¾ Firmware Upgrade: This screen allows you to upload t he latest firmware on the MFP and Storage Server. Click on Browse to specify the firmware location on your computer. Once the location path of firmware has been set, click Firmware Upgrade to begin the update. Please note that if t ...
-
TP-Link TL-PS310U - page 32
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 26 Restart: This screen allows you to reboot the MFP and Storag e Server. Please not e that if the MFP and Storage Server has a set password, you will need to enter it into the password field. ...
-
TP-Link TL-PS310U - page 33
TL-PS310U Single USB 2.0 Port MFP and S torage Print Server 27 Chapter 4 Troubleshooting 4.1 Frequently Asked Questions 1. Why can’t I connect my USB device to my computer through MFP and Storage Server? z Make sure the USB device functions normally wh en you plug it into your computer via USB cable. z If the USB device, such as USB printer or mu ...
Avez-vous une question à propos de TP-Link TL-PS310U?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec TP-Link TL-PS310U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec TP-Link TL-PS310U il est probable qu’il a envie de partager la façon de le résoudre.