Français dropdown-ico

Manuel d’utilisation Husqvarna DRT900

28 pages 1.5 mb
Télécharger

Aller à la page of 28

Summary
  • Husqvarna DRT900 - page 1

    Owner's Manual DRT 900 532 43 94-89 ...

  • Husqvarna DRT900 - page 2

    2 • Never operate the tiller without proper guards, plates, or other safety protective devices in place. • Keep children and pets away . • Do not overload the machine capacity by attempting to till too deep at too fast a rate. • Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing. • Never a ...

  • Husqvarna DRT900 - page 3

    3 CONGRA TUL A TIONS on your purchase of a new tiller . It has been designed, en gi neered and manu fac tured to give you the best pos sible de penda bil ity and per form ance. Should you experience any prob lems you can not easily remedy , please contact your nearest authorized service center . We have com pe tent, well-trained tech ni cians and t ...

  • Husqvarna DRT900 - page 4

    4 TOOLS REQUIRED FOR AS SEMBL Y A socket wrench set will make assembly easier . Standard wrench sizes are listed. (1) Utility knife (1) Tire pressure gauge (1) P air of pliers (1) 9/16" wrench OPERA TOR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the operating position (standing behin ...

  • Husqvarna DRT900 - page 5

    5 AS SEMBL Y • Grasp handle assembly . Hold in “up” position. Be sure handle lock remains in gearcase notch. Slide handle assembly into position. HANDLE ASSEMBL Y "UP" POSITION FIG. 4 UNP ACKING CARTON (See Fig. 2) CAUTION: Be careful of exposed sta ples when handling or disposing of cartoning material. IMPORT ANT : WHEN UN P ACK IN ...

  • Husqvarna DRT900 - page 6

    6 AS SEMBL Y SHIFT ROD HAIRPIN CLIP SHIFT LEVER INDICA TOR REMOVE TILLER FROM CRA TE • Make sure shift lever indicator is in “N” position (See Fig. 7) • Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield. • Rotate tiller handle to the right and pull tiller out of carton. CONNECT SHIFT ROD (See Fig. 7) • ...

  • Husqvarna DRT900 - page 7

    7 KNOW Y OUR TILLER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your Tiller or in literature supplied with the product. Learn a ...

  • Husqvarna DRT900 - page 8

    8 OPERA TION 00155 HOW TO USE Y OUR TILLER Know how to operate all controls before adding fuel and oil or attempting to start engine. STOPPING (See Fig. 9) TINES AND DRIVE • Release drive control bar to stop movement. • Move shift lever to “N” (neutral) position. ENGINE • Move throttle control to “STOP” position. • Never use choke t ...

  • Husqvarna DRT900 - page 9

    9 de pth _stake_11 OPERA TION TO TRANSPORT CAUTION: Before lifting or trans port ing, allow tiller engine and muffler to cool. Disconnect spark plug wire. Drain gasoline from fuel tank. AROUND THE Y ARD • Release the depth stake pin. Move the depth stake down to the top hole for transporting the tiller . Place depth stake pin in hole of depth sta ...

  • Husqvarna DRT900 - page 10

    10 OPERA TION TILLING HINTS (See Fig. 15) CAUTION: Until you are accustomed to handling your tiller , start actual field use with throttle in slow position (mid-way between “F AST” and “IDLE”). • Tilling is digging into, turning over , and breaking up packed soil before planting. Loose, unpacked soil helps root growth. Best tilling depth ...

  • Husqvarna DRT900 - page 11

    11 • Do not lean on handle. This takes weight off the wheels and reduces traction. T o get through a really tough section of sod or hard ground, apply upward pressure on handle or lower the depth stake. FIG. 15 FIG. 16 OPERA TION 321 5 4 67 CUL TIVA TING Cultivating is destroying the weeds between rows to pre- vent them from robbing nourishment a ...

  • Husqvarna DRT900 - page 12

    12 MAINTENANCE GENERAL RECOMMENDA TIONS The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. T o receive full value from the warranty , the operator must main tain tiller as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your tiller . All adjus ...

  • Husqvarna DRT900 - page 13

    13 MAINTENANCE FIG. 19 Disconnect spark plug wire before performing any maintenance (except car bu re tor adjustment) to prevent accidental start ing of engine. Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Re move fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris. Do ...

  • Husqvarna DRT900 - page 14

    14 MAINTENANCE MUFFLER Do not operate tiller without muffler . Do not tamper with exhaust system. Damaged mufflers or spark arresters could create a fire hazard. Inspect pe ri odi cally and re place if nec- es sary . If your engine is equipped with a spark arrester screen assembly , re move every 50 hours for cleaning and inspection. Re place if da ...

  • Husqvarna DRT900 - page 15

    15 SERVICE AND ADJUSTMENTS CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug. TILLER TO ADJUST HANDLE HEIGHT (See Fig. 23) Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil. • First loosen handle lock lever . • Han ...

  • Husqvarna DRT900 - page 16

    16 SERVICE AND ADJUSTMENTS CABLE CLIP SCREW DRIVE CONTROL CABLE EXTENSION SPRING ENGINE PULLEY IDLER PULLEY TRANS MIS SION PULLEY LESS TEN SION 5/8" MORE TEN SION FIG. 26 TO REPL ACE GROUND DRIVE BEL T (See Figs. 25 and 26) • Remove belt guard as described in “TO REMOVE BEL T GUARD”. • Remove old belt by slipping off engine pulley firs ...

  • Husqvarna DRT900 - page 17

    17 SERVICE AND ADJUSTMENTS • T o maintain the superb tilling performance of this ma chine the tines should be checked for sharpness, wear , and bending, particularly the tines which are next to the transmission. If the gap between the tines ex ceeds 3-1/2" they should be replaced or straight ened as necessary . • For tines that are slightl ...

  • Husqvarna DRT900 - page 18

    18 SERVICE AND ADJUSTMENTS FIG. 30 e ng i n e_art_78 THROTTLE CONTROL CL AMP SCREW CASING AND WIRE ENGINE TO ADJUST THROTTLE CONTROL CABLE (See Fig. 30) The throttle control has been preset at the factory and ad just ment should not be necessary . If adjustment is necessary , proceed as follows: • With engine not running, move remote throttle con ...

  • Husqvarna DRT900 - page 19

    19 STORAGE ENGINE OIL Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this man ual). CYLINDER(S) • Remove spark plug. • Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder . • Pull starter handle slowly several times to distribute oil. • Replace with new spark plug. OTHE ...

  • Husqvarna DRT900 - page 20

    20 TROUBLESHOOTING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Dirty air cleaner . 4. Clean or replace air cleaner cartridge. 5. Water in fuel. 5. Empty fuel tank and carbur ...

  • Husqvarna DRT900 - page 21

    21 REP AIR P ARTS TILLER - - MODEL NUMBER 900 DRT (96093001800), PRODUCT NUMBER 960 93 00-18 HANDLE ASSEMBL Y KEY P ART NO . NO. DESCRIPTION 20 532 10 92-28 Lever , Lock, Handle 21 532 44 08-84 Handle 23 532 08 67-77 Screw , Hex Washer SL T #10-24 x .50 24 532 00 94-84 Clip 26 532 15 92-31 Cable, Clutch 27 873 90 04-00 Nut, Hex Flange 1/4-20 unc 29 ...

  • Husqvarna DRT900 - page 22

    22 KEY P ART NO . NO. DESCRIPTION 3 873 22 06-00 Nut, Hex 3/8-16 4 532 43 24-20 Shield, Inner Belt Guard RT 5 532 16 43-29 Pin Spirol Flared 6 532 16 27-56 Lever , Shift 7 872 11 04-04 Bolt, Carriage 1/4-20 x 1/2 Gr . 5 8 532 16 15-30 Plate, Shift Indicator 9 532 08 67-77 Screw , Hex, W asher Head, Slotted #10-24 x 1/2 10 532 00 94-84 Clip 12 873 5 ...

  • Husqvarna DRT900 - page 23

    23 KEY P ART NO . NO. DESCRIPTION KEY P ART NO . NO. DESCRIPTION REP AIR P ARTS TILLER - - MODEL NUMBER 900 DRT (96093001800), PRODUCT NUMBER 960 93 00-18 MAINFRAME, RIGHT SIDE 1 532 18 51-90 Bumper Asm. 2 873 97 05-00 Locknut, Hex, Flange 5/16-18 3 819 11 11-16 Washer 11/32 x 11/16 x 16 Ga. 4 874 76 05-12 Bolt 5/16-18 x 3/4 5 532 10 23-32 Bracket, ...

  • Husqvarna DRT900 - page 24

    24 REP AIR P ARTS TILLER - - MODEL NUMBER 900 DRT (96093001800), PRODUCT NUMBER 960 93 00-18 TRANSMISSION                                        ? ...

  • Husqvarna DRT900 - page 25

    25 REP AIR P ARTS TILLER - - MODEL NUMBER 900 DRT (96093001800), PRODUCT NUMBER 960 93 00-18 TINE SHIELD 2 31 1 29 29 15 1 38 38 13 14 14 24 23 26 27 22 21 20 19 38 16 38 25 33 32 16 3 4 4 3 7 7 8 9 5 23 23 28 24 18 6 5 6 5 5 30 5 tine_shield_23_in_r1 KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO. DESCRIPTION NOTE: All component dimensions give ...

  • Husqvarna DRT900 - page 26

    26 REP AIR P ARTS TILLER - - MODEL NUMBER 900 DRT (96093001800), PRODUCT NUMBER 960 93 00-18 TINE ASSEMBL Y KEY P ART NO . NO. DESCRIPTION KEY P ART NO . NO. DESCRIPTION NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm 2 532 13 26-73 Pin, Shear 4 532 00 31-46 Clip, Hairpin 5 532 18 88-45 Hub Assembly 6 873 61 06-00 Nut, Hex 3/8 ...

  • Husqvarna DRT900 - page 27

    27 1 532 42 91-96 Decal, Belt Guard 2 532 43 17-82 Decal, Console 3 532 43 95-18 Decal, Console 4 532 43 95-15 Decal, Tine Shield 5 532 11 06-14 Decal, Hand Placement 6 532 16 62-02 Decal, Shift Indicator 7 532 43 95-38 Decal, Reverse 8 532 43 22-78 Decal, Engine B&S 9 532 17 67-82 Decal, Warning, Rotating Tines 10 532 40 91-43 Decal, Engine In ...

  • Husqvarna DRT900 - page 28

    11.15.10 SR Printed in U.S.A. ...

Fabricant Husqvarna Catégorie Cultivator

Les documents que nous recevons du fabricant de l'appareilHusqvarna DRT900 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Husqvarna
- manuels d’utilisations DRT900
- fiches produit Husqvarna
- dépliants
- ou étiquettes-énergie Husqvarna DRT900
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Husqvarna DRT900.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Husqvarna DRT900, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Husqvarna DRT900. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Husqvarna DRT900.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Husqvarna DRT900, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Husqvarna DRT900 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Husqvarna DRT900.

Le manuel d’utilisation complet Husqvarna, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Husqvarna DRT900 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Husqvarna DRT900, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHusqvarna DRT900 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Husqvarna DRT900 - qui devraient nous aider dans les premières étapes lors de l'utilisation Husqvarna DRT900
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Husqvarna DRT900
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Husqvarna DRT900 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Husqvarna DRT900?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Husqvarna DRT900, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Husqvarna DRT900 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)