Manuel d’utilisation Fujioh FSR-3000

14 pages 0.48 mb
Télécharger

Aller à la page of 14

Summary
  • Fujioh FSR-3000 - page 1

    Range Hood INSTALLATION MANUAL MODEL: F SR-3000 FSR-3600 FSR-4200 1U030381 READ AND SAVE THESE INSTRUCTIONS. Keep this manual in a convenient place for future reference. FUJI INDUSTRIAL CO., LTD. TABLE OF CONTENTS Safety Instructions .............................................................................................. 3 Name of Parts ..... ...

  • Fujioh FSR-3000 - page 2

    SAFETY INSTRUCTIONS Before installation and operation, read these instructions carefully and use this product only in the manner described by the manufacturer in the operation manual. The instructions shown below are used to alert you to potential personal injury and property damage hazards. There are three hazard classifications based on potential ...

  • Fujioh FSR-3000 - page 3

    CAUTION 3. Read specification label on this product for further information and requirements. 2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages. 6. Fasten the filter and other parts securely. Incorrect attachment ...

  • Fujioh FSR-3000 - page 4

    NAME OF PARTS SIZE & DIMENSIONS Lamp Cover Body Lamp Box Filter Rectifier Baffle Panel Oil Catch Tray Switch Fan Case Cover Accessories Washer Head Wood Screw ( × 6 pcs.) Screw ( × 4 pcs.) Soft Tape ( × 1 pc.) Cover Plate ( × 1 pc.) Duct Joint (rectangular) (Unit : inch) Dimensions (in inches) Model A B FSR-3000 30 27 FSR-3600 36 33 FSR-420 ...

  • Fujioh FSR-3000 - page 5

    1 The range hood must be installed just above the cooktop. 2 The minimum distance from the cooking surface to the bottom of the range hood must be 24”. 3 The total weight of the FSR series range hoods are: FSR-3000 ---------- 16 kg FSR-3600 ---------- 17 kg FSR-4200 ---------- 18 kg 4 Power requirements are: AC120 V, 60 Hz, 1.9 Amp RANGE HOOD LOC ...

  • Fujioh FSR-3000 - page 6

    1. PREPARATION 1 This range hood can discharge upward or backward. According to the conditions where the hood is installed, determine whether it will discharge vertically (3¼" × 10" or 7" Round) or horizontally (3¼" × 10" only). For vertical or horizontal discharge, run duct work between the hood location and a roof cap ...

  • Fujioh FSR-3000 - page 7

    ; 3¼" × × × × × 10" Horizontal Ducting ; 7" Round Vertical Ducting 8 ...

  • Fujioh FSR-3000 - page 8

    3 Run house wiring between service panel and hood location. 4 Prepare the range hood. (1) Remove the 7" round duct joint on the top plate of the body by removing 2 fixing screws. Note: Keep the screws for reusing later. (2) Remove the Rectifier Baffle Panel by loosening the screws, and dislocating its temporary fixing holes from the screws. No ...

  • Fujioh FSR-3000 - page 9

    ; In Case of 3-1/4 " × × × × × 10 " Vertical Discharge Mount the supplied 3-1/4" × 10" rectangular duct joint on the top plate with 4 screws (2 pieces: removed in Step 4-1, the others: supplied). Then attach the supplied soft tape around the duct joint. ; In Case of 7 " Round Vertical Discharge First, remove half-cut ...

  • Fujioh FSR-3000 - page 10

    2. RANGE HOOD MOUNTING 1 Referring to “SIZE & DIMENSIONS”, insert 4 washer head wood screws into the bottom plate of the cabinet. Marking before screwing is recommended. Allow about ¼" between the bottom plate and screwheads for hanging the hood body. 2 With inserting the duct joint into the duct end, hook the temporary fixing holes o ...

  • Fujioh FSR-3000 - page 11

    Conduit Nut Range Hood 3. CONNECTING POWER SUPPLY WIRES WARNING : • Electrical wiring should be done by a qualified person(s) in accordance with all-applicable codes and standards, including fire-rated construction. An unqualified person doing the work could result in fire, electric shock or injury. • This range hood uses 120V AC. Do not connec ...

  • Fujioh FSR-3000 - page 12

    Conduit Range Hood Wire (unit side) Wire (conduit side) Wire Connector (not supplied) 3 Connect the electrical wires as follows: Connect wires tightly and securely using wire connectors (not supplied). • Black to Black • White to White • Green to Green 4 Make sure that all wires are connected properly and enclosed inside of the wiring compart ...

  • Fujioh FSR-3000 - page 13

    CIRCUIT DIAGRAM 120V 60Hz Indicating Lamp Lamp receptacle E26 (Lamp Max 60W) Control Switch AC125V 3A Lock Lock Release Reset Key Yellow Yellow Yellow Red 60W 60W Black White Green Connector Connector Connector Black Red Orange Brown Blue Red Orange Brown Blue Orange Brown Blue Capacitor 7 µ F 250VAC Gray Gray Gray Red White Model No.1U201361 Capa ...

  • Fujioh FSR-3000 - page 14

    Fuji Industrial Co., Ltd. 2-1-9 Fuchinobe, Sagamihara-shi, Kanagawa-ken 229-0006 Japan Tel. +81-42-753-1001 Fax. +81-42-753-1009 1U030381 ...

Fabricant Fujioh Catégorie Ventilation Hood

Les documents que nous recevons du fabricant de l'appareilFujioh FSR-3000 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Fujioh
- manuels d’utilisations FSR-3000
- fiches produit Fujioh
- dépliants
- ou étiquettes-énergie Fujioh FSR-3000
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Fujioh FSR-3000.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Fujioh FSR-3000, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Fujioh FSR-3000. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Fujioh FSR-3000.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Fujioh FSR-3000, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Fujioh FSR-3000 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Fujioh FSR-3000.

Le manuel d’utilisation complet Fujioh, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Fujioh FSR-3000 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Fujioh FSR-3000, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lFujioh FSR-3000 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Fujioh FSR-3000 - qui devraient nous aider dans les premières étapes lors de l'utilisation Fujioh FSR-3000
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Fujioh FSR-3000
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Fujioh FSR-3000 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Fujioh FSR-3000?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Fujioh FSR-3000, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Fujioh FSR-3000 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)