Français dropdown-ico

Manuel d’utilisation Panasonic AW-RP120G

44 pages 9.9 mb
Télécharger

Aller à la page of 44

Summary
  • Panasonic AW-RP120G - page 1

    Operating Instructions <Basics> Remote Camera Controller  ModelNo.  AW-RP120G VQT4T93(E) SS0113HO0-FJ PrintedinJapan ENGLISH z  Die Bedienungsanleitung in Deutsch ist als PDF-Datei in der CD-ROM enthalten. z  Le mode d’emploi en français est fourni sous forme de fichier PDF sur le CD-ROM. z  Le istruzioni per ...

  • Panasonic AW-RP120G - page 2

    2 ENGLISH p  How to open the operating instruction manual PDF files Discontinue installation if the installation screen of the software opens as a result of inserting the CD-ROM. When [INDEX.pdf] on the CD-ROM is opened, a list of the operating instruction manuals will be displayed. Click on the document name of the manual to be opened. p  Ad ...

  • Panasonic AW-RP120G - page 3

    3 Read this first! W ARNING: Always keep memory cards or accessories out of the reach of babies and small children. W ARNING: Installation should only be performed by qualified installation personnel. Improper installation may result in the entire apparatus falling down and causing injury . W ARNING: • T o reduce the risk of fire, do not expose t ...

  • Panasonic AW-RP120G - page 4

    4 IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8) Do not install near any heat so ...

  • Panasonic AW-RP120G - page 5

    5 Read this first! (continued) EMC NOTICE FOR THE PURCHASER/USER OF THE APP ARA TUS 1. Applicable standards and operating environment (A W-RP120G) The apparatus is compliant with: • standards EN55103-1 and EN55103-2, and • electromagnetic environ ments E1, E2, E3, E4 and E5. 2. Pre-requisite conditions to achieving compliance with the above sta ...

  • Panasonic AW-RP120G - page 6

    6 About trademarks and registered trademarks   Microsoft ® , Windows ® , Windows ® 7, and Internet Explorer ® are registered trademarks or trademarks of Microsoft Corporation in the United States, Japan, and/or other countries.   Intel ® and Intel ® Core TM are trademarks or registered trademarks of Intel Corporation and its subsi ...

  • Panasonic AW-RP120G - page 7

    7 Introduction   Overview This unit is a controller which is designed to control remote cameras. It can be used to control up to 100 remote cameras when IP connections are used, and up to 5 remote cameras when serial connections are used. Also, operation linked to an A W-HS50 compact live switcher can be implemented by means of an IP connecti ...

  • Panasonic AW-RP120G - page 8

    8 Features IP connections and serial connections supported IP connections  Up to 100 remote cameras *1 can be controlled via a network hub (switching hub).  The unit’s auto IP setting function can be used to automatically assign and control the IP addresses of the remote cameras *1 and switcher *2 . *1: Supported cameras: A W-HE50, A W -HE6 ...

  • Panasonic AW-RP120G - page 9

    9 Accessories Check the accessories.   After unpacking the product, dispose of the packaging material appropriately . CD-ROM .......................... 1  Operating Instructions <Basics>  Operating Instructions <Operations and Settings>  Setup software Precautions for use Observe the following in addition to the informati ...

  • Panasonic AW-RP120G - page 10

    10 Precautions for installation In addition to the safety precautions given in “Read this first!”, also observe the following instructions. Be sure to ask your dealer to perform the installation and connection work for the unit. Connecting a power supply   Insert the DC plug for the external DC power supply all the way in until it locks i ...

  • Panasonic AW-RP120G - page 11

    1 1 Appearance Unit: mm (inch) 161 ( 0000 ) 77 ( 0000 ) 54 ( 0000 ) 342 ( 0000 ) 265 ( 0000 )   Mount angle attachment position 249.6 ( 0000 ) 12.4 ( 0000 ) 51 ( 0000 ) 140 ( 0000 ) 2-M3 39 ( 0000 ) 74.3 ( 0000 ) 52.5 ( 0000 ) 17 ( 0000 ) 317.2 ( 0000 ) ...

  • Panasonic AW-RP120G - page 12

    12 Parts and their functions Control panel    Menu operation section Memory card section User button section Camera selection section Pan and tilt section Indicator section Color adjustment section Focus, zoom and iris section Menu and memory selection section 1 POWER indicator [POWER] This turns on when the POWER switch (  ) on the rea ...

  • Panasonic AW-RP120G - page 13

    13 5 F1 dial [F1] F2 dial [F2] Use these to operate the menus of the unit or the OSD menu of a remote camera. Use the CAMERA OSD button ( 4 ) to select which operation to perform. When the dials are used to operate the menus of the unit, the F1 dial operates the items displayed at the top of the LCD panel of the unit, and the F2 dial operates the i ...

  • Panasonic AW-RP120G - page 14

    14 Parts and their functions (continued) Focus, zoom and iris section          > FOCUS dial [FOCUS] Use this to manually control the focus. During auto focusing (when the auto focus button [  ] indicator is on), operation is disabled. T urned clockwise : The focus moves to the far end. T urned counterclockwise : The ...

  • Panasonic AW-RP120G - page 15

    15 Parts and their functions (continued) Color adjustment section             BARS button [BARS] Use this to select the video signal output from the remote camera. Each press switches between the signal for the images shot by the camera and the color bar signal. Button indicator off : Outputs the signal for the i ...

  • Panasonic AW-RP120G - page 16

    16 Parts and their functions (continued)  R/B PED dials [R/B PED] Use these to individually adjust the pedestal of the R channel and B channel (R PED and B PED) in order to set the desired black balance. T urned clockwise : Displays the setting values of the R PED and B PED on the LCD panel and changes the value in the plus (+) direction. T urne ...

  • Panasonic AW-RP120G - page 17

    17 Parts and their functions (continued)  Number buttons [1] to [50] Use these to select menus, preset memory , and tracing memory . X MEMOR Y SETTING button [MEM SETTING] Use this to set SPEED and SCOPE of the preset memory . ⇒ “Operating preset memory (PMEM)” in Operations and Settings (page 13)  PMEM P AGE indicators [1] [2] These in ...

  • Panasonic AW-RP120G - page 18

    18 Parts and their functions (continued) Rear panel           POWER switch [POWER] When the POWER switch is set to the ON position, the POWER indicator ( 1 ) lights, and the unit can be operated.  TO P AN/TIL T HEAD 1 to 5 connectors [TO P AN/TIL T HEAD 1 to 5] (RJ-45) Connect remote cameras that support a serial co ...

  • Panasonic AW-RP120G - page 19

    19 Basic operations of the unit 1. T urn on the unit’ s power. Set the POWER switch to the ON position. Power is supplied to the unit, and the POWER indicator turns on.  When the “2. AUTO ON” item in CAMERA SETUP menu [24] is set to “On”, the power of the remote cameras also turn on simultaneously with the turning on of the unit's ...

  • Panasonic AW-RP120G - page 20

    20 Basic operations for the menus 1. Set the MENU button to ON. Press the MENU button to turn on its indicator . 2. Select the target menu. Press any of the number buttons [21] to [50] to turn on its indicator . The selected menu is displayed on the LCD panel. 3. Use the F1 dial and F2 dial to change the setting values. Use the F1 dial and F2 dial ...

  • Panasonic AW-RP120G - page 21

    21 Connections Examples of IP connections   IP connections for remote cameras (A W-HE120, A W-HE50S and A W-HE60S) and A W-HS50 HD integrated camera A W-HE120 HD integrated cameras (*) A W-HE120 SDI video signals Switching hub LAN cables (Straight cables) Max. 100 m (328 ft) Compact live switcher A W-HS50 Monitor 1 Monitor 2 Monitor Monitor L ...

  • Panasonic AW-RP120G - page 22

    22   IP connections for multiple units and remote cameras (A W-HE120, A W-HE50 and A W-HE60) HD integrated camera A W-HE120 HD integrated cameras (*) A W-HE120 Switching hub LAN cables (Straight cables) Max. 100 m (328 ft) Remote camera controller A W-RP120 Remote camera controller A W-RP120 Remote camera controller A W-RP120 Remote camera co ...

  • Panasonic AW-RP120G - page 23

    23 Examples of serial connections   Serial connections for A W-HE120 remote cameras (*) The illustration of the supplied AC adapter has been omitted. HD integrated camera A W-HE120 HD integrated cameras (*) A W-HE120 SDI video signals Switcher Monitor 1 Monitor 2 Monitor Monitor LAN cables (straight cables) Max. 1000 m (3280 ft) System tally ...

  • Panasonic AW-RP120G - page 24

    24   Serial connection for a remote camera (A W-HE50 or A W -HE60) LAN cable (straight cable) Max. 1000 m (3280 ft) External DC power supply (option) Remote camera controller A W-RP120 Supplied AC adapter HD integrated camera A W-HE50 Monitor RJ-45 relay adapter Multi-interface cable A W-CA20T6G (  ) (  ) Connect to the connector indica ...

  • Panasonic AW-RP120G - page 25

    25 Connections (continued)   Serial connections for A W-PH400 and camera Supported camera: Any of AW-HE870, AW -E860, A W-E750, AW-E650, AW -E350, AK-HC1500 or AK-HC1800 LAN cable (straight cable) External DC power supply (option) Remote camera controller A W-RP120 Protocol converter A W-IF400 Zoom lens Max. 1000 m (3280 ft) Max. 500 m (1640 ...

  • Panasonic AW-RP120G - page 26

    26 Connections (continued)   Serial connections for A W-PH650 and camera LAN cable (straight cable) Max. 1000 m (3280 ft) External DC power supply (option) Remote camera controller A W-RP120 Monitor Outdoor pan-tilt head A W-PH650 RJ-45 relay adapter Y POWER SDI OUT MUL TI Pr Pb G/L input  Use a straight cable (category 5 or above) for the ...

  • Panasonic AW-RP120G - page 27

    27 Network settings of the unit T o control a remote camera connected via an IP connection from the unit, you need to set the network settings of the unit.   Correct operation is not possible if the same IP address already exists in the same network. Set IP addresses that are not duplicates of any existing IP addresses. Note Setting the IP ad ...

  • Panasonic AW-RP120G - page 28

    28 Settable addresses 1.CAM1 192.168.000.001 Block 1 Block 2 Block 3 Block 4   For the IP address and default gateway , you can set values within the following ranges. Block 1: 1 to 223 Block 2: 0 to 255 Block 3: 0 to 255 Block 4: 1 to 254 However , “127.000.000.001” cannot be set even though it is within the above ranges.   For the ...

  • Panasonic AW-RP120G - page 29

    29 Settings for connecting with the remote cameras and switcher T o control remote cameras from the unit and use the function to link the unit and a switcher , you need to set the connection settings in advance. There are two ways of configuring the connection settings. Y ou can either configure the settings on the unit or use the setup software to ...

  • Panasonic AW-RP120G - page 30

    30 Settings for connecting with the remote cameras and switcher (continued) Setting the connection types for remote cameras (serial/IP/no connection) 1. Set the connection types for camera numbers CAM1 to CAM100. Open CTRL TYPE menu [36] and turn the F1 dial to display the camera number to set. 1.CAM1 NoAsign 2. T urn the F2 dial to select the conn ...

  • Panasonic AW-RP120G - page 31

    31 192.168.000.010  192.168.000.011 192.168.000.010  192.168.000.010 192.168.000.010  192.168.000.012 192.168.000.008  192.168.000.008 192.168.000.009 Remote camera A Remote camera B Remote camera C Switcher Unit CAM1 CAM3 CAM2  The subnet mask, default gateway , and port number settings are set the same as those for the unit.  Fo ...

  • Panasonic AW-RP120G - page 32

    32 When introducing additional remote cameras or a switcher into an environment in which IP connections are already in use The settings can be configured using auto IP setting even when introducing additional remote cameras or a switcher into an environment in which IP connections are already in use. There are the following two methods. 1. Automati ...

  • Panasonic AW-RP120G - page 33

    33 3. T urn the F2 dial to select “Y es”, and then press the F2 dial. Auto IP setting starts. During auto IP setting, the progress is indicated by the number of “ ” which are reduced one by one. 1.AUTO SET      When all the operations have been completed successfully , the following message appears. 1.AUTO SET COMPLETE The re ...

  • Panasonic AW-RP120G - page 34

    34 <Operating procedure> 1. Connect the additional remote cameras and switcher to be introduced and the unit to the network within the same subnet. 2. Open AUT O IP menu [37], turn the F2 dial to display “KEEP IP ADR” and press the F2 dial. 1.AUTO SET KEEP IP ADR Both the number of devices (all remote cameras and the switcher) currently b ...

  • Panasonic AW-RP120G - page 35

    35 Swapping connection destination IP addresses When auto IP setting is executed, the remote cameras are linked to the camera numbers of the unit and become able to be controlled from the unit. If the link settings are not as desired, you can use the following procedure to change the settings as you wish. 1. Open SW AP IP menu [38] and turn the F1 ...

  • Panasonic AW-RP120G - page 36

    36 Setting the connection destination port number Set this when the remote camera needs to be identified by a port number such as when connecting via a router .   The connection destination port number of the switcher cannot be set. 1. Open PORT NO menu [40] and turn the F1 dial to display the camera number for which you want to change the se ...

  • Panasonic AW-RP120G - page 37

    37 Selecting a camera group This unit allows you to register up to 100 remote cameras as control targets by configuring the connection settings for each of the camera numbers CAM1 to CAM100. T o select a remote camera to control from these cameras, you need to select the camera group to which it belongs beforehand. Camera group Camera numbers Camer ...

  • Panasonic AW-RP120G - page 38

    38 Selecting a remote camera When the selection mode button [SELECT] indicator is on, you can press a camera selection button [CAMERA SELECT/GROUP SELECT] to select the remote camera to control. When a camera selection button is pressed, the indicator of the pressed button turns on and the remote camera is selected. Also, you can determine the stat ...

  • Panasonic AW-RP120G - page 39

    39 T roubleshooting Symptom Cause and Measure Reference Page Cannot turn the power of the unit on.   Is external DC power being supplied? –   Is the DC plug of the external DC power supply connected to the unit properly? – Cannot operate a remote camera   Is a power supply connected to the remote camera properly? –   A ...

  • Panasonic AW-RP120G - page 40

    40 Specifications Power supply: 12 V DC / 0.67 A (DC input range: 10 V DC to DC 16 V DC) Power consumption: 8 W indicates safety information.   General Ambient operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Allowable humidity: 10% to 90% (no condensation) Weight: Approx. 3.5 kg (7.72 lb) Dimensions (W  H  D): 342 mm  77 m ...

  • Panasonic AW-RP120G - page 41

    41 p x Menu [25] RP SETUP 6. GLOBAL AREA ......................................................................... 28 7. IP ADDRESS ............................................................................ 27 8. SUBNETMASK ......................................................................... 27 9. GA TEWA Y .................................. ...

  • Panasonic AW-RP120G - page 42

    42 Memo ...

  • Panasonic AW-RP120G - page 43

    43 Memo ...

  • Panasonic AW-RP120G - page 44

    Information on Disposal for Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated c ...

Fabricant Panasonic Catégorie Video Game Controller

Les documents que nous recevons du fabricant de l'appareilPanasonic AW-RP120G peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Panasonic
- manuels d’utilisations AW-RP120G
- fiches produit Panasonic
- dépliants
- ou étiquettes-énergie Panasonic AW-RP120G
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Panasonic AW-RP120G.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Panasonic AW-RP120G, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Panasonic AW-RP120G. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Panasonic AW-RP120G.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Panasonic AW-RP120G, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Panasonic AW-RP120G par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Panasonic AW-RP120G.

Le manuel d’utilisation complet Panasonic, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Panasonic AW-RP120G - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Panasonic AW-RP120G, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPanasonic AW-RP120G qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Panasonic AW-RP120G - qui devraient nous aider dans les premières étapes lors de l'utilisation Panasonic AW-RP120G
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Panasonic AW-RP120G
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Panasonic AW-RP120G dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Panasonic AW-RP120G?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Panasonic AW-RP120G, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Panasonic AW-RP120G il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)