-
Sanyo VCC-4115P - page 1
INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS VCC-4115P COLOUR CCD camera CCD-Farbkamera Caméra CCD COULEUR CCD About this manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. Über diese Bedienungsanleitung Lesen Sie bitte vor der Montage und dem Inbetrieb ...
-
Sanyo VCC-4115P - page 2
English 1 Depending on the conditions of use, i nstallation and environment, please b e sure to ma ke the appropriate settings and adjustments. If you need help wi th installation and/or settings, please consult your dealer. CONTENTS PRECAUTION S .............. ................... ................. 2 PARTS NAME S .............. ................... ...
-
Sanyo VCC-4115P - page 3
ENGLISH 2 English PRECAUTIONS ■ ■ ■ ■ In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not t o function correctly. D isconnect the power cord im mediately, and consult your dealer (or a Sanyo Autho rized Service Centre). ■ ■ ■ ■ Do not open or modif y Do not open the cabinet, a ...
-
Sanyo VCC-4115P - page 4
English 3 PARTS NAMES 1 Shor te r scr ews : M3 x 4 2 Longer screws: M3 x 6 3 Camera mounting screw hole: 1/4"-20 UNC 1 2 3 4 1 Flange-back lock screw (LOCK) 2 Flange-back a djustment dial 3 Lens mount c ap The cap is inst alled to protect the lens m ount section. Remove the lens mount cap before i nstalling a lens (sold separately). 4 Camera i ...
-
Sanyo VCC-4115P - page 5
4 English PARTS NAMES 9 8 6 7 5 F G H 5 Camera setup sect ion 6 White balance adjustment volume (R or B ) 7 Line phase adjustment volume (PHASE) 8 Lens iri s adjust ment volume 9 Lens iri s output connec tor (LE NS) This 4-pin connector is used to send the DC control si gnal and power supply to an auto-iris type lens. F Video output con nector (VID ...
-
Sanyo VCC-4115P - page 6
English 5 MOUNTING THE LENS 1 2 C mount type lens CS mount type lens 2 3 Please use a DC type auto-iris lens (sold separately). 1 Remove the lens mount cap from the camera . 2 Install the auto- iris lens. CS mount type lens Carefully align the lens mount with the camera opening, then turn the lens slowly to i nstall it. C mount type lens To allow f ...
-
Sanyo VCC-4115P - page 7
6 English MOUNTING THE LENS 4 3 1 2 1 3 2 ■ ■ ■ ■ Pin layout ■ ■ ■ ■ Flange-back a djustment If the pick-up su rface is not corr ectly positioned with relation to the lens focal point, the picture will be out of f ocus (in particular when using auto-iris power zoom lenses, sold separately). If that is the cas e, adjust the flange-ba ...
-
Sanyo VCC-4115P - page 8
English 7 CONNECTION S Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.), AC adaptor and cables are sold separately. 1 Make the video signal connec tion between the camera and the monitor or time lapse VCR. 2 Connect the power supply. • If using a commercially-available 24 V AC adapter, always be sure ...
-
Sanyo VCC-4115P - page 9
8 English SETTINGS 12 5 6 3 4 7 ■ ■ ■ ■ Camera setup section No. Setting s Posi tion 1 Electro nic Iri s (EI) /Auto i ris (AI ) sett ing AI 2 Aperture compensatio n setting SHRP • SHRP (sharp)/NORM (normal) 3 Backlight comp ensation mode setting (BLC) OFF • MULTI (Mul ti)/OFF 4 Backlight comp ensation mode setting (BLC) OFF • CENT (Ce ...
-
Sanyo VCC-4115P - page 10
English 9 SETTINGS ■ ■ ■ ■ Iris function setting 1 1 1 1 This should normally b e set to the down ( AI ) position. Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the switch 1 to the up ( EI ) position. Note: Please refer to the specifications for dynamic range of t he electronic iris. CAUTION: • The ...
-
Sanyo VCC-4115P - page 11
10 English SETTINGS ■ ■ ■ ■ Backlight compensation s etting 3 4 3 4 3 4 3 4 This camera has two differen t backlight correction functions: multi-spot photometry ( MULT I ) and center focus photometry ( CENT ). The normal setting (switch 3 and 4 ) is the down position, but you can change the switch 3 or 4 setting in accordanc e with the back ...
-
Sanyo VCC-4115P - page 12
English 11 SETTINGS ■ ■ ■ ■ White balance adjustment 5 5 5 5 Normally the switch 5 i s set to the down ( ATW : aut o white balance) position and the whit e balance is adjusted automatically. If a manual white balance adjustment is necessary, follow the steps below. Set the switch 5 to the up ( MANU ) position, then ad just the colour. • T ...
-
Sanyo VCC-4115P - page 13
12 English SETTINGS ■ ■ ■ ■ Lens iris adjust ment 7 7 7 7 If using a DC ty pe auto-iris lens, you will need to set the LEVEL volume when shooting in the conditions described below. L (counter clockwi se): To decreas e the contrast H (clockwise): T o increase the contrast • If shooting simultaneously in a dark room a nd through a bright wi ...
-
Sanyo VCC-4115P - page 14
English 13 TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not p e rform correctly, please consult your dealer or a Sanyo Authorized Service Centre. ■ ■ ■ ■ No picture on the monitor screen • Is the power turned on to al l connected devices? Is the v ...
-
Sanyo VCC-4115P - page 15
14 English SPECIFICATIONS ■ ■ ■ ■ Camera: SERVI CE This camera is a precision instruments and if treated wi th care, will provide years of satisf actory performance. H owever, in the event of a p roblem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred t o your dealer or Sany o Aut ...
-
Sanyo VCC-4115P - page 16
English 15 SPECIFICATIONS ■ ■ ■ ■ Dimensions Features and sp ecifications are subject to change without prior n otice or obligations. 1.4 108 99 10.7 M6 16 25.8 45 56 28 vcc4115p(gb).fm 15 ペー ジ 2002年9月 5日 木曜日 午後 4時0分 ...
Avez-vous une question à propos de Sanyo VCC-4115P?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Sanyo VCC-4115P, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sanyo VCC-4115P il est probable qu’il a envie de partager la façon de le résoudre.