-
Yamaha EMX100CD - page 1
CD Changer Receiver Sintoamplificador con cambiador de discos compactos CD Changer Receiver Sintoamplificador con cambiador de discos compactos OWNER’ S MANUAL MANUAL DE INSTRUCCIONES OWNER’ S MANUAL MANUAL DE INSTRUCCIONES CD CHANGER RECEIVER EMX – 100CD PHONES POWER DISC 123 PROGRAM ECHO ECHO MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TU ...
-
Yamaha EMX100CD - page 2
2 2 SUPPLIED ACCESSORIES ● After unpacking, check that the following parts are contained. ACCESORIOS INCLUIDOS ● Desembalar el aparato y verificar que los siguientes accesorios están en la caja. ● Remote control transmitter ● Controlador remoto ● Batteries (size AA, UM/SUM-3, R6, HP-7) ● Pilas (tamaño AA, tipo UM/SUM-3, R6, HP-7) ● ...
-
Yamaha EMX100CD - page 3
3 3 1 CD CHANGER RECEIVER EMX – 100CD PHONES POWER DISC 123 PROGRAM ECHO ECHO MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TUNER/TAPE•MD/AUX VOLUME RANDOM DISPLAY MIC MIN MAX MIC MIXING REPEAT TIME MEMORY AUTO/MAN'L HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER OPEN/ CLOSE DISC CHANGE MHz PRESET USER NOR TEST PHANTOM TIMER SLEEP ST ...
-
Yamaha EMX100CD - page 4
4 4 CD CHANGER RECEIVER EMX – 100CD PHONES POWER DISC 123 PROGRAM ECHO ECHO MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TUNER/TAPE•MD/AUX VOLUME RANDOM DISPLAY MIC MIN MAX MIC MIXING REPEAT TIME MEMORY AUTO/MAN'L HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER OPEN/ CLOSE DISC CHANGE TRACK TOTAL REM USER RANDOM PROGRAM MUSIC ROCK AR ...
-
Yamaha EMX100CD - page 5
5 5 3 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B C D + I0 E OPEN / CLOSE RANDOM REPEAT MODE 6 6 7 7 8 8 9 0 CD PRESET TUNER STOP INPUT PLAY / PAUSE LEVEL MUSIC TEST FLAT CENTER / REAR / DELAY ECHO PROGRAM USER POWER DISPLAY SLEEP VOLUME 2 3 5 7 8 6 4 G F B D C A 0 E 9 1 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B C D + I0 E OPEN / CLOSE RANDOM REP ...
-
Yamaha EMX100CD - page 6
6 6 6 SPEAKERS CENTER/REAR VOLTAGE SELECTOR SPEAKERS FRONT AC OUTLET MAINS R L CENTER REAR REAR REAR SINGLE CENTER :8 Ω MIN./SPEAKER 6 Ω MIN./SPEAKER SEE OWNER'S MANUAL FOR CONNECTION. SEE OWNER'S MANUAL FOR CONNECTION. REAR :4 Ω MIN./SPEAKER REAR SINGLE :8 Ω MIN./SPEAKER RL L SPEAKERS CENTER/REAR SPEAKERS FRONT R L CENTER REAR RE ...
-
Yamaha EMX100CD - page 7
7 7 7 SPEAKERS CENTER/REAR VOLTAGE SELECTOR SPEAKERS FRONT AC OUTLET MAINS R L CENTER REAR REAR REAR SINGLE CENTER :8 Ω MIN./SPEAKER 6 Ω MIN./SPEAKER SEE OWNER'S MANUAL FOR CONNECTION. SEE OWNER'S MANUAL FOR CONNECTION. REAR :4 Ω MIN./SPEAKER REAR SINGLE :8 Ω MIN./SPEAKER RL L UNSWITCHED 100W MAX. AUDIO SIGNAL AUX TAPE • MD LD ? ...
-
Yamaha EMX100CD - page 8
8 8 VOLUME VOLUME VOLUME CD CHANGER RECEIVER EMX – 100CD PHONES POWER DISC 123 PROGRAM ECHO ECHO MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TUNER/TAPE•MD/AUX VOLUME RANDOM DISPLAY MIC MIN MAX MIC MIXING REPEAT TIME MEMORY AUTO/MAN'L HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER OPEN/ CLOSE DISC CHANGE PHONES DISC SKIP STOP INPUT ...
-
Yamaha EMX100CD - page 9
E-1 English ENGLISH INTRODUCTION CONTENTS Page PRECAUTIONS ................................................2-3 FEA TURES ..........................................................4 NAMES OF CONTROLS AND INDICA T ORS......5 REMOTE CONTROL TRANSMITTER .................6 SETTING UP THE SPEAKERS ...........................7 CONNECTIONS ................ ...
-
Yamaha EMX100CD - page 10
E-2 PRECAUTIONS: READ THIS BEFORE OPERA TING YOUR UNIT ■ To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ■ Choose the installation location of this unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and exc ...
-
Yamaha EMX100CD - page 11
W ARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. E-3 English NOTE Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may i ...
-
Yamaha EMX100CD - page 12
E-4 FEA TURES The System ● 5 speaker Configuration Front L, R: 75W + 75W (6 Ω ) RMS Output Power , 10% THD, 1 kHz 65W + 65W (6 Ω ) RMS Output Power , 1% THD, 1 kHz Center : 20W (8 Ω ) RMS Output Power , 1% THD, 1 kHz Rear: 20W (8 Ω ) RMS Output Power , 1% THD, 1 kHz ● Adjustable Display Brightness ● 2 Microphone Jacks and Mic Mixing L ...
-
Yamaha EMX100CD - page 13
E-5 English NAMES OF CONTROLS AND INDICA TORS For amplifier/tuner (See figure 1 on page 3 3 at the beginning part of this manual.) 1 POWER Switch 2 PHONES Jack 3 Remote Control Sensor 4 USER Button 5 User Program MEMORY Button 6 DISPLAY Button 7 PRESET/TUNING/BAND Selector Button 8 MIC (Microphone) Jacks 9 A/B/C/D/E Button 0 MIC MIXING (Microphone ...
-
Yamaha EMX100CD - page 14
E-6 Loading the batteries for the remote control transmitter (See figure 4 on page 5 5 .) 1 Remove the battery compartment cover. (Slide the cover in the direction of the arrow.) 2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment. * Installing the batteries improperly may cause failure. 3 Replace the ...
-
Yamaha EMX100CD - page 15
E-7 English SETTING UP THE SPEAKERS This unit is designed to provide the best sound-field quality with a 5-speaker configuration: front speakers, rear speakers and a center speaker. You may omit the center speaker, if for some reason it is not practical to use a center speaker. (Refer to the “ 4- Speaker Configuration ” shown below.) The front ...
-
Yamaha EMX100CD - page 16
E-8 ANTENNA AM FM GND 75 Ω UNBAL. ANTENNA AM FM GND 75 Ω UNBAL. (1) (2) (3) (4) ANTENNA AM FM GND 75 Ω UNBAL. VCR MONITOR OUT ANTENNA AM FM GND 75 Ω UNBAL. NORMAL 50kHz 9kHz 100kHz FM AM PHANTOM CENTER MODE FREQUENCY STEP N OUT E O SIGNAL Antenna connection (1) Supplied FM antenna Connect the FM antenna wire to the corresponding terminal an ...
-
Yamaha EMX100CD - page 17
E-9 English CONNECTIONS Connecting speakers (See figure 6 on page 6 6 .) Connect the front speakers to the FRONT SPEAKERS terminals, the center speaker to the CENTER SPEAKERS terminals and the rear speakers to the REAR SPEAKERS terminals. Note Use speakers with the specified impedance shown on the rear of this unit. How to Connect: Connect the SPEA ...
-
Yamaha EMX100CD - page 18
E-10 If desired, you can adjust brightness of the display. 1 Press and hold the DISPLAY button for more than 2 seconds so that “DIMMER±0” appears on the display. 2 Holding the DISPLAY button pressed, turn the VOLUME control clockwise to increase or counterclockwise to decrease brightness. This adjustment can be made even though the power of th ...
-
Yamaha EMX100CD - page 19
E-11 English SPEAKER BALANCE ADJUSTMENT SPEAKERS CENTER/REAR VOLTAGE SELECTOR SPEAKERS FRONT AC OUTLET MAINS R L CENTER REAR REAR REAR SINGLE CENTER :8 Ω MIN./SPEAKER 6 Ω MIN./SPEAKER SEE OWNER'S MANUAL FOR CONNECTION. SEE OWNER'S MANUAL FOR CONNECTION. REAR :4 Ω MIN./SPEAKER REAR SINGLE :8 Ω MIN./SPEAKER RL L UNSWITCHED 100W MAX. ...
-
Yamaha EMX100CD - page 20
E-12 SPEAKER BALANCE ADJUSTMENT 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B C D + I0 E OPEN / CLOSE RANDOM REPEAT MODE 6 6 7 7 8 8 9 0 CD PRESET TUNER STOP INPUT PLAY / PAUSE LEVEL MUSIC TEST FLAT CENTER / REAR / DELAY ECHO PROGRAM USER POWER DISPLAY SLEEP VOLUME 6 Adjust the sound output levels of the center speaker and the rear speakers by using ...
-
Yamaha EMX100CD - page 21
E-13 English CD playback 1 Select the CD player by turning the INPUT SELECTOR until “CD” appears on the display. 2 Press the OPEN/CLOSE button to open the disc table. 3 Place discs on the trays, label side up. * Up to three discs can be loaded on the trays. To load the third disc, rotate the disc table by pressing the DISC CHANGE button on the ...
-
Yamaha EMX100CD - page 22
E-14 1 1 2 2 3 3 4 4 5 5 + I0 E 6 6 7 7 8 8 9 0 CD PRESET 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B C D + I0 E OPEN / CLOSE RANDOM REPEAT MODE 6 6 7 7 8 8 9 0 CD PRESET TUNER STOP INPUT PLAY / PAUSE LEVEL MUSIC TEST FLAT CENTER / REAR / DELAY ECHO PROGRAM USER POWER DISPLAY SLEEP VOLUME COMP ACT DISC PLA YER OPERA TION Direct operation When the p ...
-
Yamaha EMX100CD - page 23
E-15 English COMP ACT DISC PLA YER OPERA TION “Skip search” and “Manual search” are performed using the same buttons. T o play a desired track on the disc (Skip search) The beginning of any track can be found automatically. 1 Select a disc and begin playback. 2 Press the button to advance or button to reverse through the disc. Press once fo ...
-
Yamaha EMX100CD - page 24
E-16 TRACK TOTAL USER TAPE 1 ROGRAM OGIC HALL PROG VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 TRACK USER TAPE 1 PROGRAM OGIC HALL PROG VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 COMP ACT DISC PLA YER OPERA TION Program play You can program up to 20 tracks in any desired order. 1 Load discs and close the disc table. 2 When in the stop mode ...
-
Yamaha EMX100CD - page 25
E-17 English To stop program play • Press the stop button. The first programmed track number will be displayed. • To resume playback, press the play/pause / button. Playback will begin from the beginning of the program. To cancel a programmed sequence There are several methods as described below. • Press the stop button while the unit is stop ...
-
Yamaha EMX100CD - page 26
E-18 Repeat play All discs, an entire disc, a single track or a programmed sequence can be continuously repeated. 1 While watching the display, press the REPEAT button once or more to select a desired repeat play mode (S REP or F REP). 2 Press the play/pause / button. Repeat play modes SINGLE REPEAT (S REP) A single track is played back repeatedly. ...
-
Yamaha EMX100CD - page 27
E-19 English Random play Tracks on a selected disc or all discs on the disc table can be played back in a random order. 1 Load discs and close the disc table. 2 If necessary, switch the disc play mode by pressing the disc play MODE selector button. * If the single disc play mode is selected, select a desired disc by pressing the DISC SKIP button. 3 ...
-
Yamaha EMX100CD - page 28
E-20 Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning). Automatic tuning 1 Select the tuner by turning the INPUT SELECTOR until “TUNER” appears on the disp ...
-
Yamaha EMX100CD - page 29
E-21 English TUNING OPERA TION Preset tuning This unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations (8 stations x 5 groups) can be stored. To store stations (Example: To store a station to A1) 1 Tune in to ...
-
Yamaha EMX100CD - page 30
E-22 Automatic preset tuning You can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page. 1 Select the tuner by turning th ...
-
Yamaha EMX100CD - page 31
E-23 English OPERA TING EXTERNAL UNITS CONNECTED WITH THIS UNIT T o listen to or watch a source on an external unit connected with this system 1 Select the position of input source (TAPE z MD, AUX, VCR or LD z TV) you will play back by turning the INPUT SELECTOR until the corresponding name appears on the display. * The names of input source positi ...
-
Yamaha EMX100CD - page 32
E-24 The built-in graphic equalizer presents you with the pleasure of listening to music with various sound effects. This unit provides 4 preset equalizer modes as listed right. You can enjoy listening to music with a desired sound effect by selecting one of these modes. In addition, the built-in 5 band graphic equalizer allows you to adjust the eq ...
-
Yamaha EMX100CD - page 33
E-25 English Adjusting the graphic equalizer for your desired sound taste The 5 band graphic equalizer allows you to adjust the level for each frequency band. * Make adjustment by monitoring the equalizer level indicators on the display. 1 Play back a source. (For source playback, refer to the sections beginning on page 13.) 2 Press the equalizer c ...
-
Yamaha EMX100CD - page 34
E-26 The Sound Field Processor built into this unit presents you with the ambience of an actual concert hall etc. by adding effects as sonic reflections or reverberations that create the sound environment of a hall etc. This system provides preset sound field programs shown below. You can enjoy an excellent audio sound field by selecting one of the ...
-
Yamaha EMX100CD - page 35
E-27 English Listening to the music with a sound field effect 1 Play back a source. (For source playback, refer to the sections beginning on page 13.) 2 Press the PROGRAM button once or more so that the name of a desired program appears on the sound field program indicator. * Whenever you press the PROGRAM button, the program changes and is display ...
-
Yamaha EMX100CD - page 36
E-28 Adjusting CENTER LEVEL If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 11–12. Control range : +10 to –21 1 Press the CENTER/REAR/DELAY selector button once or more so that “CENT” appears on the display. 2 By continuously pressing ...
-
Yamaha EMX100CD - page 37
E-29 English USING SOUND FIELD PROCESSOR Adjusting DELA Y TIME You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the effect sound from the rear speakers. The larger the value, the later the effect sound is generated. This adjustment can be made to all programs (except DOLBY 3 STEREO) i ...
-
Yamaha EMX100CD - page 38
E-30 Your favorite pair of any equalizer mode (or an equalizer pattern of your own adjusting) and any sound field program can be stored as a user program. Up to 4 pairs can be stored as desired. To store 1 Select a desired equalizer mode by pressing the MUSIC button. * If desired, adjust the equalizer as you prefer by using the equalizer control bu ...
-
Yamaha EMX100CD - page 39
E-31 English CD CHANGER RECEIVER EMX – 100RDS PHONES DISC 123 PROGRAM MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TUNER/TAPE•MD/AUX VOLUME RANDOM DISPLAY MIC MIN MAX MIC MIXING REPEAT TIME MEMORY AUTO/MAN'L HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER OPEN/ CLOSE DISC CHANGE MIC MIN MAX MIC MIXING STANDBY/ON KARAOKE OPERA TION Si ...
-
Yamaha EMX100CD - page 40
E-32 CD CHANGER RECEIVER EMX – 100CD PHONES POWER DISC 123 PROGRAM ECHO ECHO MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TUNER/TAPE•MD/AUX VOLUME RANDOM DISPLAY MIC MIN MAX MIC MIXING REPEAT TIME MEMORY AUTO/MAN'L HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER OPEN/ CLOSE DISC CHANGE HOW TO USE THE BUIL T -IN TIMER T imer play By u ...
-
Yamaha EMX100CD - page 41
E-33 English CD CHANGER RECEIVER EMX – 100CD PHONES POWER DISC 123 PROGRAM ECHO ECHO MUSIC USER MEMORY INPUT SELECTOR VCR/LD-TV/CD/TUNER/TAPE•MD/AUX VOLUME RANDOM DISPLAY MIC MIN MAX MIC MIXING REPEAT TIME MEMORY AUTO/MAN'L HOUR PRESET/TUNING/BAND A/B/C/D/E MIN TIME ADJ TIMER OPEN/ CLOSE DISC CHANGE ➂ ON TIME/time setting mode [“ON TIM ...
-
Yamaha EMX100CD - page 42
E-34 HOW TO USE THE BUIL T -IN TIMER Sleep timer operation This unit can be turned off automatically. 1 Play the desired sound source. 2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “2h00m”. 3 Press the SLEEP button repeatedly until the desired sleep time appears on the display. The display will change ...
-
Yamaha EMX100CD - page 43
E-35 English TROUBLESHOOTING If your unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. CAUSE AC ...
-
Yamaha EMX100CD - page 44
E-36 SPECIFICA TIONS As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. ■ Amplifier section Minimum RMS Output Power per Channel Front L, R 6 ohms, 1 k ...
-
Yamaha EMX100CD - page 45
ESPECIFICACIONES TECNICAS Como parte de la política de mejoras continuas, YAMAHA se reserva el derecho de realizar cambios en el diseño y especificaciones para la mejora del producto sin previo aviso. Las figuras indicadas que especifican el rendimiento son valores nominales de los aparatos de producción. ■ Sección del Amplificador Potencia d ...
Avez-vous une question à propos de Yamaha EMX100CD?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Yamaha EMX100CD, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Yamaha EMX100CD il est probable qu’il a envie de partager la façon de le résoudre.