Français dropdown-ico

Manuel d’utilisation Grandstream Networks 486

34 pages 0.39 mb
Télécharger

Aller à la page of 34

Summary
  • Grandstream Networks 486 - page 1

    User Manual HandyTone-486 Analog Telephone Adaptor For Firmware Version 1.0.6.0 Grandstream Networks, Inc. www.grandstream.com ...

  • Grandstream Networks 486 - page 2

    HandyTone-486 User Manual Grandstream Net works, Inc. 2 Table of Contents 1 WELCOME ..................................................................................................................... 3 2 INSTALLATION ............................................................................................................ 4 3 WHAT IS INCLUDED I ...

  • Grandstream Networks 486 - page 3

    HandyTone-486 User Manual Grandstream Net works, Inc. 3 1 Welcome Congratulations on becoming an owner of HandyTone-486. You ma de an excellent choice and we hope you will en joy all its capabilities. Grandstream's award-wining HandyTone-486 is an all-in-one VoIP integrated access device that features superb audio quality, ri ch functionalitie ...

  • Grandstream Networks 486 - page 4

    HandyTone-486 User Manual Grandstream Net works, Inc. 4 2 Installation HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HandyTone-486 VoIP functi onalities are availa ble via a regular analog telephone. The following photo illustrates the appeara ...

  • Grandstream Networks 486 - page 5

    HandyTone-486 User Manual Grandstream Net works, Inc. 5 3 What is Included in the Package The HandyTone-486 package contains: 1) One HandyTone-486 2) One universal power adaptor 3) One Ethernet cable 3.1 Safety Compliances The HandyTone-486 is compliant with various safety standards in cluding FCC/CE and C-tick. Its power adaptor is compliant with ...

  • Grandstream Networks 486 - page 6

    HandyTone-486 User Manual Grandstream Net works, Inc. 6 4 Product Overview 4.1 Key Features • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. • Built-in router, NAT, Gateway and DMZ port forwarding • Powerful digital signal processing (DSP) to en sure sup ...

  • Grandstream Networks 486 - page 7

    HandyTone-486 User Manual Grandstream Net works, Inc. 7 4.2 Hardware Specification The table below describes the features of the model. Model HandyTone-486 LAN interface 1xRJ45 10Base-T WAN interface 1xRJ45 10Base-T FXS telephone port 1xFXS PSTN port 1x PSTN pass through or life line port Button 1 LED Green and red color Universal Switching Power A ...

  • Grandstream Networks 486 - page 8

    HandyTone-486 User Manual Grandstream Net works, Inc. 8 5 Basic Operations 5.1 Get Familiar with Key Pad and Voice Prompt HandyTone-486 has stored a voice prompt menu (Interactive Voi ce Response or IVR) for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button or “***” from the analog phone . Menu Vo ...

  • Grandstream Networks 486 - page 9

    HandyTone-486 User Manual Grandstream Net works, Inc. 9 • ‘*’ functions similar to ‘ ↓ ’ key of BT-100 phone to select the next menu option • ‘#’ returns back to main MENU • ‘9’ is similar to ENTER key in many cases to confirm an option • All entered digit sequences have known lengths - 2 digits for menu option and 12 digi ...

  • Grandstream Networks 486 - page 10

    HandyTone-486 User Manual Grandstream Net works, Inc. 10 *4 (encoding for “:”) followed by the encoded port number. Following is a table of the encoding scheme for the most commonly used characters: F 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 *0 . (dot character) *4 : (column character) Examples: If the target IP address is 192.168. 0.1 ...

  • Grandstream Networks 486 - page 11

    HandyTone-486 User Manual Grandstream Net works, Inc. 11 • Call Flashing. When in conversation, user can also flash to the third party by pressing flash(or Flash Hook for old styl e phones) button to get a dial tone and then dial the third party number. 5.2.4 Blind Transfer Assume that call party A and B ar e in conversation. A wants to Blind Tra ...

  • Grandstream Networks 486 - page 12

    HandyTone-486 User Manual Grandstream Net works, Inc. 12 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone 2. A then dial C’s number then # (or wa it for 4 seconds), A and C now in conversation. 3. Then A can hang up. NOTES: • When intended Transfer failed, if A hangs up, the HandyTone 486 will ring ...

  • Grandstream Networks 486 - page 13

    HandyTone-486 User Manual Grandstream Net works, Inc. 13 *70 Disable Call Waiting. (Per Call) *71 Enable Call Waiting (Per Call) *72 Unconditional Call Forward. To use this feature, dial “*72”, wait for the dial tone. Then dial the forward number, wait for dial tone, hang up. *73 Cancel Unconditional Call Forward To cancel “Unconditional Cal ...

  • Grandstream Networks 486 - page 14

    HandyTone-486 User Manual Grandstream Net works, Inc. 14 5.5 Sending and Receiving Fax Grandstream HandyTone series support two modes for Fax over IP, one is T.38, the other is Fax pass through. T. 38 mode is used by default. 5.6 LED Light Pattern Indication Following are the LED light pattern indication. RED LED always indicates abnormal status DH ...

  • Grandstream Networks 486 - page 15

    HandyTone-486 User Manual Grandstream Net works, Inc. 15 6 Configuration Guide 6.1 Configuring HandyTone-486 WAN IP through Voice Prompt 6.1.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP. 6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use STATIC IP mode, th ...

  • Grandstream Networks 486 - page 16

    HandyTone-486 User Manual Grandstream Net works, Inc. 16 http://HandyTone-IP-Address , where the HandyTone-IP-Address is the WAN IP address of the HandyTone- 486. NOTE: • If typing IP address into address of brow ser to get into the configuration page, please strip out the “0” announced in I VR or displayed in the phone if using BT or GXP pho ...

  • Grandstream Networks 486 - page 17

    HandyTone-486 User Manual Grandstream Net works, Inc. 17 Following are configuration pages End User will see once log in correctly: • Basic Settings Page: Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS End User Password: (purposely not displayed fo r security protection) IP Address: dynamically assigned via DHCP (default ...

  • Grandstream Networks 486 - page 18

    HandyTone-486 User Manual Grandstream Net works, Inc. 18 DM Z IP: Port Forwarding: WAN port 0 LAN IP LAN port 0 Protocol " U D P O nl y " WAN port 0 LAN IP LAN port 0 Protocol " U D P O nl y " WAN port 0 LAN IP LAN port 0 Protocol " U D P O nl y " WAN port 0 LAN IP LAN port 0 Protocol " U D P O nl y " WAN por ...

  • Grandstream Networks 486 - page 19

    HandyTone-486 User Manual Grandstream Net works, Inc. 19 Time Zone This parameter controls how the displayed date/time will be adjusted according to the specified time zone. D a y li g ht Savin g s Time This parameter controls whet her the displayed time will be daylight savings time or not. If se t to Yes, then the displayed time will be 1 hour ah ...

  • Grandstream Networks 486 - page 20

    HandyTone-486 User Manual Grandstream Net works, Inc. 20 PPPoE Link Up: disabled NAT: detected NAT type is full cone NAT Mapped IP: 70.22.149.194 NAT Mapped Port: 61063 Total Inbound Calls: 0 Total Outbound Calls: 1 Total Missed Calls: 0 Total Call Time (in minutes): 1 Total SIP Messa g e Sent: 12 Total SIP Messa g e Received: 14 Total RTP Packet S ...

  • Grandstream Networks 486 - page 21

    HandyTone-486 User Manual Grandstream Net works, Inc. 21 NAT Mapped IP WAN side public IP if connected to LAN of a SOHO router. Other Statistical Status of ATA Self explainable, see the page displayed. BASIC SETTINGS: End User Password This contains the password to access the Web Configuration Menu. This field is case se nsitive with max. 25 charac ...

  • Grandstream Networks 486 - page 22

    HandyTone-486 User Manual Grandstream Net works, Inc. 22 LAN Subnet Mask Sets the LAN subnet mask. De fault value is 255.255.255.0 LAN DHCP Base IP: Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1 D HCP IP Lease Time: Value is set in units of hours. Default value is 120hr (5 Days.) The time IP addr ...

  • Grandstream Networks 486 - page 23

    HandyTone-486 User Manual Grandstream Net works, Inc. 23 Traversal Setting and other misce llaneous configurations. Following is the snap shot of the configuration page. Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS Admin Password: (purposely not displayed fo r security protection) SIP Server: s ip.ser v ic epr ov ider .c ...

  • Grandstream Networks 486 - page 24

    HandyTone-486 User Manual Grandstream Net works, Inc. 24 Layer 2 QoS: 802.1Q/VLAN Tag 0 802.1p priority value 0 (0-7) Use DNS SRV: No Yes User ID is phone number: No Yes SIP Registration: Yes No Unregister On R eboot: Yes No R egister Expiration: 60 (in minutes. default 1 hour, max 45 days) Early Dial: No Yes (use "Yes" only if prox y sup ...

  • Grandstream Networks 486 - page 25

    HandyTone-486 User Manual Grandstream Net works, Inc. 25 Disable Call- Waiting: No Yes Send DTMF: in-audio via RTP (RFC2833) via SIP INFO DTMF Payload Type: 101 Send Flash Event: No Yes (Flash will be sent as a DTMF event if set to Yes) FXS Impedance: c ur r ent s etting is " 600 Ohm ( N or t h A m er ica) " Caller ID Scheme: c ur r ent s ...

  • Grandstream Networks 486 - page 26

    HandyTone-486 User Manual Grandstream Net works, Inc. 26 Authentication Password Account information, password fo r ATA to register to (S IP) servers of I TSP. Name Field for user to put in additional information to b e displayed when calling, like caller ID. Preferred Vocode r The HandyTone ATA su pports up to 7 d ifferent codec typ es including G ...

  • Grandstream Networks 486 - page 27

    HandyTone-486 User Manual Grandstream Net works, Inc. 27 Unregister on Rebo ot Default is No. If set to yes, the SIP user will be unregistered on reboot. Register Expiration This parameter allows the user to sp ecify the time frequency (in minutes) the Hand yTone ATA will refresh its registration with the specified regi strar. The default interval ...

  • Grandstream Networks 486 - page 28

    HandyTone-486 User Manual Grandstream Net works, Inc. 28 Via H TTP Up g rade Server The URL for the we b server used f or firmware upgra de and configur ation via HTTP. Fo r example, http://provisioning.myco mpany.com:6688/Grandstream/1 .0.6.0 Here “:6688” is the specific TCP port that the HTTP server is listenin g to, it can be omitted if usin ...

  • Grandstream Networks 486 - page 29

    HandyTone-486 User Manual Grandstream Net works, Inc. 29 PSTN Access Code Default is “*00”. By press the code, use r can switch the phone connected to ATA to PSTN line connected to the Line port of ATA and cal l out using PSTN. Use r can change this to other access code like “8” or “9” or wh atever user prefer. This is very useful when ...

  • Grandstream Networks 486 - page 30

    HandyTone-486 User Manual Grandstream Net works, Inc. 30 6.2.4 Saving the Configuration Changes Once a change is made, the user should click the “Update” button in the Configuration Menu. The HandyTone ATA will then display th e following screen to confirm that the changes have been saved. Grandstream Device Configuration STATUS BASIC SETTINGS ...

  • Grandstream Networks 486 - page 31

    HandyTone-486 User Manual Grandstream Net works, Inc. 31 6.3 Configuration throug h a Central Server Grandstream HandyTone ATAs can be automatically c onfigured from a central provisioning system. When HandyTone ATA boot up, it will send TF TP or HTTP request to download configuration files, there ar e two configuration files, one is “cfg.txt” ...

  • Grandstream Networks 486 - page 32

    HandyTone-486 User Manual Grandstream Net works, Inc. 32 7 Software Upgrade 7.1 Upgrade through HTTP To upgrade software, HandyTone ATAs can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycom pany.com:6688/Grandstream/1.0.6.0 Here, firmware.mycompa ...

  • Grandstream Networks 486 - page 33

    HandyTone-486 User Manual Grandstream Net works, Inc. 33 Once the TFTP server is c onfigured, power cycle the Ha ndyTone ATA to start TFTP upgrade. TFTP checking is only performed during the initial power up. If the configured TFTP server is found and a new code image is av ailable, the HandyTone ATA will attempt to retrieve the new image files by ...

  • Grandstream Networks 486 - page 34

    HandyTone-486 User Manual Grandstream Net works, Inc. 34 8 Restore Factory Default Setting Warning : Restore the Factory Default Setting will eras e all configuration information of the device. • Step one: Find the MAC Address of the device . The MAC address of the device is located on the bottom of the devi ce. It is a 12 digits hex number. • ...

Fabricant Grandstream Networks Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilGrandstream Networks 486 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Grandstream Networks
- manuels d’utilisations 486
- fiches produit Grandstream Networks
- dépliants
- ou étiquettes-énergie Grandstream Networks 486
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Grandstream Networks 486.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Grandstream Networks 486, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Grandstream Networks 486. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Grandstream Networks 486.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Grandstream Networks 486, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Grandstream Networks 486 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Grandstream Networks 486.

Le manuel d’utilisation complet Grandstream Networks, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Grandstream Networks 486 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Grandstream Networks 486, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lGrandstream Networks 486 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Grandstream Networks 486 - qui devraient nous aider dans les premières étapes lors de l'utilisation Grandstream Networks 486
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Grandstream Networks 486
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Grandstream Networks 486 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Grandstream Networks 486?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Grandstream Networks 486, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Grandstream Networks 486 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)