Français dropdown-ico

Manuel d’utilisation Icom IC-M32

40 pages 1.01 mb
Télécharger

Aller à la page of 40

Summary
  • Icom IC-M32 - page 1

    INSTRUCTION MANUAL iM32 VHF MARINE TRANSCEIVER This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. New2001 IC-M32-1.qxd 03.9.25 6:21 PM Page 1 (1,1) ...

  • Icom IC-M32 - page 2

    i New2001 SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the haz- ards, and the ways to minimize such hazards. This radio is NOT inten ...

  • Icom IC-M32 - page 3

    ii New2001 IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ...........................” (name of vessel) 3. Y our call sign or other indication of the ves- se ...

  • Icom IC-M32 - page 4

    FOREWORD Thank you for purchasing this Icom product. The IC-M32 VHF MARINE TRANSCEIVER is designed and built with Icom’s state of the art technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation. IMPOR T ANT READ ALL INSTRUCTIONS carefully and com- pletely before using the transceiver . S ...

  • Icom IC-M32 - page 5

    iv PRECAUTION R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting. The transceiver will perform best if the microphon ...

  • Icom IC-M32 - page 6

    v New2001 SAFETY TRAINING INFORMA TION ................................... i IN CASE OF EMERGENCY ............................................... ii RECOMMENDA TION .......................................................... ii FOREWORD ...................................................................... iii IMPORT ANT ............................ ...

  • Icom IC-M32 - page 7

    1 1 OPERA TING RULES 1 D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel. • False or fraudulent distress calls are prohibited under law . D Privacy • I ...

  • Icom IC-M32 - page 8

    2 SUPPLIED ACCESSORIES AND A TT ACHMENTS New2001 2 ■ Supplied accessories The following accessories are supplied: Qty . • Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Handstrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Belt clip (MB-68) . . . . . . . . . . . . . . . ...

  • Icom IC-M32 - page 9

    3 2 SUPPLIED ACCESSORIES AND A TT ACHMENTS New2001 2 ï Battery pack T o remove the battery pack: T urn the screw counterclockwise, then pull the battery pack in the direction of the arrow as shown below . T o attach the battery pack: Insert the battery pack in the IC-M32 completely , then turn the screw clockwise. NEVER remove or insert the batter ...

  • Icom IC-M32 - page 10

    4 P ANEL DESCRIPTION New2001 3 ■ Front, top and side panels q POWER SWITCH [PWR] Push and hold to turn power ON and OFF . w ANTENNA CONNECTOR (p. 2) Connects the supplied antenna. e SCAN/DUAL KEY [SCN • DUAL ] • Starts and stops normal or priority scan. (p. 15) • Enters watch mode when pushed for 1 sec. (p. 16) • Exits watch mode when pus ...

  • Icom IC-M32 - page 11

    5 3 P ANEL DESCRIPTION New2001 3 u CHANNEL UP/DOWN KEYS [ Y Y ]/[ Z Z ] • [T AG] • Selects an operating channel. (pgs. 8, 9) • Selects the SET mode condition of the item. (p. 17) • Checks tag channels or changes scanning direction dur- ing scan. (p. 15) • Sets or clears the displayed channel as a tag (scanned) channel when pushed both key ...

  • Icom IC-M32 - page 12

    6 3 P ANEL DESCRIPTION New2001 ■ Function display q TRANSMIT INDICA TOR (p. 1 1) Appears while transmitting. w BUSY INDICA TOR Appears when receiving a signal or when the squelch opens. (p. 1 1) “” blinks while monitoring. (p. 13) e T AG CHANNEL INDICA TOR (p. 15) Appears when a tag channel is selected. r CALL CHANNEL INDICA TOR (p. 8) Appear ...

  • Icom IC-M32 - page 13

    7 3 P ANEL DESCRIPTION New2001 3 !1 SQUELCH LEVEL INDICA TOR Shows the squelch level. !2 VOLUME LEVEL INDICA TOR Shows the volume level. !3 VOLUME LEVEL ADJUSTING INDICA TOR Blinks while adjusting the volume level. !4 SQUELCH LEVEL ADJUSTING INDICA TOR Blinks while adjusting the squelch level. !5 CHANNEL NUMBER READOUT • Indicates the selected op ...

  • Icom IC-M32 - page 14

    8 BASIC OPERA TION New2001 4 ■ Channel selection IMPORT ANT!: Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. T o avoid damage to the transceiver, turn the power OFF while charging. D Channel 16 Channel 16 (Distress channel) is used for establishing initial contact with ano ...

  • Icom IC-M32 - page 15

    9 4 BASIC OPERA TION New2001 4 D U.S.A., International and Canadian channels There are 57 U.S.A., 57 International, and 61 Canadian chan- nels. These channel groups may be speci fi ed for the operat- ing area. q Push [CH/WX • U/I/C ] to select a regular channel. • If a weather channel appears, push [CH/WX • U/I/C ] again. w Push [ Y ]/[ Z ] ...

  • Icom IC-M32 - page 16

    10 4 BASIC OPERA TION New2001 ■ Adjusting the volume level The volume level can be adjusted with [ + ]/[ – ]. ➥ Push [ + ]/[ – ] t o adjust the vo lu m e level. •“ VOL ” indicator starts blinking. • There are 32 volume levels to choose. • When no key is pushed for 5 sec., the transceiver returns to nor- mal condition. ■ Adjustin ...

  • Icom IC-M32 - page 17

    11 4 BASIC OPERA TION New2001 4 ■ Receiving and transmitting q Push and hold [PWR] to turn power ON. w Set the volume and squelch levels. ➥ Push [SQL • MONI ], and push [ – ] to open the squelch. ➥ Push [SQL • MONI ] to stop “ SQL ” indicator blinking, then push [ + ]/[ – ] to set the volume level. ➥ Push [SQL • MONI ], and pu ...

  • Icom IC-M32 - page 18

    12 4 BASIC OPERA TION New2001 ■ Call channel programming The call channel key is used to select Channel 9 by default, however , you can program your most often-used channel in each channel group for quick recall. q Push [CH/WX • U/I/C ] for 1 sec. several times to select the desired channel group (USA, INT , CAN) to be programmed. w Push [16 ? ...

  • Icom IC-M32 - page 19

    13 4 BASIC OPERA TION New2001 4 ■ Lock function This function electronically locks all keys (except for [ + ]/[ – ], [PTT], [SQL • MONI ] and [H/L • LOCK ]) to prevent accidental channel changes and function access. ➥ Push [H/L • LOCK ] for 1 sec. to turn the lock function ON and OFF . ■ Automatic backlighting This function is conveni ...

  • Icom IC-M32 - page 20

    14 SCAN OPERA TION New2001 5 ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has priority scan and normal scan. In addition, the weather alert and auto scan function is avail- able for standby convenience. These functions can be acti- vated simultaneously , depending on the setti ...

  • Icom IC-M32 - page 21

    15 5 SCAN OPERA TION New2001 ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear the tag for unwanted channels. Non-tag channels will be skipped during scanning. T ag chan- nels can be assigned to each channel group (USA, INT , CAN) independently . q Select the desired channel group (USA, INT , CAN) b ...

  • Icom IC-M32 - page 22

    16 DUAL W A TCH/TRI-W A TCH New2001 New2001 6 ■ Description Dualwatch monitors Channel 16 while you are receiving another channel; tri-watch monitors Channel 16 and the call channel while receiving another channel. ■ Operation q Select the desired operating channel. w Push [SCN • DUAL ] for 1 sec. to start dualwatch or tri-watch (depending on ...

  • Icom IC-M32 - page 23

    17 7 SET MODE 6 7 New2001 ■ SET mode programming SET mode is used to change the condition of 12 transceiver functions: beep tone function, weather alert function, priority scan function, scan resume timer , auto scan function, dual/tri- watch function, monitor switch action, automatic backlighting, LCD contrast selection, auto power save function ...

  • Icom IC-M32 - page 24

    18 7 SET MODE New2001 ■ SET mode items D Beep tone function “ bP ” Y ou can select silent operation by turning the beep tones OFF , or you can have 2 types of con fi rmation beeps sound at the push of a switch. When ON is selected, a fi xed beep (Pi) sounds, and when US is selected, the preset beeps (e.g. do, re, mi) sound. • Beep tone sy ...

  • Icom IC-M32 - page 25

    19 7 SET MODE New2001 7 D Scan resume timer “ St ” The scan resume timer can be set as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until a received signal disappears. When ON is selected, the scan pauses for 5 sec. after receiving a signal and then resumes even if the signal has been received. D Auto scan function ? ...

  • Icom IC-M32 - page 26

    20 7 SET MODE New2001 D Automatic backlighting “ bL ” This function is convenient for nighttime operation. The auto- matic backlighting turns the backlighting ON when any key except for [PTT] is pushed. • The backlighting is automatically turned OFF after 5 sec. of inactivity . D LCD contrast selection “ LC ” The contrast of the LCD can b ...

  • Icom IC-M32 - page 27

    21 7 SET MODE New2001 7 D Self check function “ SC ” The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode. • T emperature : Outside of – 25 ° C to +65 ° C; – 13 ° F to +149 ° F (a ...

  • Icom IC-M32 - page 28

    22 7 SET MODE New2001 Indication Switch Beep tone function Function Weather alert function Priority scan function Scan resume timer Auto scan function Dual/T ri-watch function Monitor switch action Automatic backlighting LCD contrast selection Power save function Self check function OFF / ON* / US OFF* / ON OFF* / ON OFF* / ON OFF* / ON Dual* / T r ...

  • Icom IC-M32 - page 29

    23 8 BA TTER Y CHARGING 7 8 ■ Battery charging Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. CAUTION: T o avoid damage to the transceiver , turn the power OFF while charging. • Recommended temperature range for charging: +10 ° C to +40 ° C (+50 ° F to +104 ° F) • ...

  • Icom IC-M32 - page 30

    24 8 BA TTERY CHARGING New2001 ï Charging connections q Attach the BC-150 to a flat surface, such as a desk or cabin, etc., if desired. w Connect the AC adapter (BC-147A/E or BM-95V) as shown below . e Insert the battery pack with/without the transceiver into the charger . • The charge indicator lights green. r Charge the battery pack approx. 8 ...

  • Icom IC-M32 - page 31

    25 8 BA TTERY CHARGING New2001 8 ■ Optional battery chargers ï AD-103 installation q Install the AD-103 desktop charger adapter into the holder space of the BC-1 19N/121N. w Connect the plugs of the BC-1 19N/121N to the AD-103 desktop charger adapter with the connector , then install the adapter into the charger with the supplied screws. Screws ...

  • Icom IC-M32 - page 32

    26 8 BA TTERY CHARGING New2001 ï Rapid charging with the BC-1 19N+AD-103 The optional BC-1 19N provides rapid charging of battery packs. The following are additionally required. • AD-103 charger adapter • An AC adapter (may be supplied with BC-1 19N depending on version) or the DC power cable (OPC-515L/CP-17L). ï Rapid charging with the BC-12 ...

  • Icom IC-M32 - page 33

    27 9 SWIVEL BEL T CLIP 8 9 ■ MB-87 contents Qty . q Belt clip ……………………………………………………… 1 w Base clip …………………………………………………… 1 ■ T o attach q Slide the base clip into the plastic loop on the back of the transceiver as illustrated below . w Clip the belt clip to a part o ...

  • Icom IC-M32 - page 34

    28 9 SWIVEL BEL T CLIP New2001 ■ T o detach ➥ T urn the transceiver upside down in the direction of the arrow and pull out from the belt clip. R R CAUTION! HOLD THE TRANSCEIVER TIGHTL Y , WHEN HANGING OR DET ACHING THE TRANSCEIVER FROM THE BEL T CLIP . Otherwise the transceiver may not be attached to the holder or swivelled properly if the tran ...

  • Icom IC-M32 - page 35

    29 10 TROUBLESHOOTING 9 10 PROBLEM POSSIBLE CAUSE SOLUTION REF . No sound from speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 10 p. 10 — • Set squelch to the threshold point. • Push [ + ]/[ – ] to set a suitable level. • Drain water from the speaker . The transceiver does ...

  • Icom IC-M32 - page 36

    30 VHF MARINE CHANNEL LIST New2001 New2001 11 Channel number USA CAN T ransmit Receive Frequency (MHz) INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT WX channel Frequency (MHz) T ransmit Receive 01 156.050 160. ...

  • Icom IC-M32 - page 37

    31 12 SPECIFICA TIONS New2001 GENERAL • Frequency coverage : T ransmit 156.025 – 157.425 MHz Receive 156.050 – 163.275 MHz • Mode : FM (16K0G3E) • Channel spacing : 25 kHz • Power supply requirement : BP-223, BP-224 only • Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical. Max. audio 200 mA typical Power save 20 mA typical • ...

  • Icom IC-M32 - page 38

    32 OPTIONS New2001 New2001 13 D BA TTERY CASE AND P ACK • BP-223 BA TTERY CASE Battery case for 6 × AA (R6) alkaline cells. • BP-224 Ni-Cd BA TTERY P ACK 7.2 V/750 mAh Ni-Cd battery pack. D CHARGERS • BC-1 19N DESKTOP CHARGER + AD-103 CHARGER ADAPTER + BC-145 AC ADAPTER For rapid charging of battery packs. An AC adapter is supplied with the ...

  • Icom IC-M32 - page 39

    New2001 13 IC-M32-1.qxd 03.9.25 6:21 PM Page 33 (1,1) ...

  • Icom IC-M32 - page 40

    1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6297D-1EX- q Printed in Japan © 2003 Icom Inc. New2001 IC-M32-1.qxd 03.9.25 6:21 PM Page 34 (1,1) ...

Fabricant Icom Catégorie Portable Radio

Les documents que nous recevons du fabricant de l'appareilIcom IC-M32 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Icom
- manuels d’utilisations IC-M32
- fiches produit Icom
- dépliants
- ou étiquettes-énergie Icom IC-M32
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Icom IC-M32.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Icom IC-M32, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Icom IC-M32. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Icom IC-M32.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Icom IC-M32, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Icom IC-M32 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Icom IC-M32.

Le manuel d’utilisation complet Icom, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Icom IC-M32 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Icom IC-M32, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lIcom IC-M32 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Icom IC-M32 - qui devraient nous aider dans les premières étapes lors de l'utilisation Icom IC-M32
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Icom IC-M32
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Icom IC-M32 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Icom IC-M32?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Icom IC-M32, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Icom IC-M32 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (1)

Jacob

Hi, Are you still in business? I found a few errors on your site. Would you like me to send over a screenshot of those errors? Regards Jacob (714) 500-7363