Français dropdown-ico

Manuel d’utilisation Optoma Technology HD33

60 pages 17.51 mb
Télécharger

Aller à la page of 60

Summary
  • Optoma Technology HD33 - page 1

    English 1 T able of Contents T able of Contents ........................1 Usage Notice ...............................2 Safety Information ....................................... 2 Precautions ................................................. 3 Eye Safety W arnings ................................... 6 Introduction ................................. ...

  • Optoma Technology HD33 - page 2

    English 2 Usage Notice The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangl ...

  • Optoma Technology HD33 - page 3

    English 3 Usage Notice Please follow all warnings, precautions and mainte- nance as recommended in this user ’ s guide. When the lamp  reaches the end of its life, the pro- jector will not turn back on until the lamp module has been replaced. T o replace the lamp, follow the proce- dures listed under “Replacing the Lamp” section. ▀ ■ W ...

  • Optoma Technology HD33 - page 4

    English 4 Usage Notice Do: T urn off and unplug the power plug from the AC outlet before  cleaning the product. Use a soft dry cloth with mild detergent to clean the display hous-  ing. Disconnect the power plug from AC outlet if the product is not be-  ing used for a long period of time. Do not: Block the slots and openings on the unit pr ...

  • Optoma Technology HD33 - page 5

    English 5 Usage Notice Pregnant women, the elderly , sufferers of serious medical condi-  tions, those who are sleep deprived or under the inuence of alcohol should avoid utilizing the unit’s 3D functionality . If you experience any of the following symptoms, stop viewing 3D  pictures immediately and consult a medical specialist: (1) alt ...

  • Optoma Technology HD33 - page 6

    English 6 Usage Notice ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize the lamp power, use room blinds to re- ...

  • Optoma Technology HD33 - page 7

    English 7 Introduction Power Cord 1.8m Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact Optoma customer service. Documentation:  User ’s Manual  Warranty Card  Quick Start Card  WEEE Card Due to different  applications in each Country , some reg ...

  • Optoma Technology HD33 - page 8

    English 8 Introduction Product Overview V entilation (outlet) 1. Focus Ring 2. IR Receiver 3. V entilation (inlet) 4. Zoom Ring 5. T ilt-Adjustment Feet 6. Zoom Lens 7. Main Unit 7 5 7 3 6 9 10 6 3 4 2 1 5 6 8 6 11 Lens Cap 8. Power Socket 9. Input / Output Connections 10. Kensington 1 1. TM Lock Port ...

  • Optoma Technology HD33 - page 9

    English 9 Introduction Connection Ports HDMI1 Input Connector 1. HDMI2 Input Connector 2. VGA-In/YPbPr Connector 3. (PC Analog Signal/Component V ideo Input/HDTV/YPbPr) Component Video Input Connector 4. Composite Video Input Connector 5. 3D Sync Out (5V) Connector 6. 12V T rigger Relay (12V , 250mA) 7. Lamp LED 8. (Indicates the projector ’ s la ...

  • Optoma Technology HD33 - page 10

    English 10 Introduction Remote Control Power On 1. Power Off 2. 16:9 3. Native 4. PureEngine 5. 3D Format 6. Enter 7. Re-Sync 8. VGA Source 9. Video Source 10. HDMI 2 Source 1 1. YPbPr Source 12. HDMI 1 Source 13. Menu 14. Source 15. Lamp Mode 16. Contrast 17. Brightness 18. LBX 19. 4:3 20. Mode 21. Four Directional Select Keys 22. 1 2 3 4 5 6 9 10 ...

  • Optoma Technology HD33 - page 11

    English 11 Installation Due to the  difference in ap- plications for each country , some regions may have different acces- sories. * Optional Acces-  sory Power Cord 1. DVI/HDMI Cable * 2. VGA Cable * 3. USB Cable * 4. Emitter Cable * 5. 12V DC Plug * 6. RS232 Cable * 7. Connect to Computer/Notebook N OTE Connecting the Projector HDMI 1 HDMI ...

  • Optoma Technology HD33 - page 12

    English 12 Installation Power Cord 1. HDMI Cable * 2. RCA Component Cable for YPbPr * 3. VGA to RCA Component Cable for YPbPr * 4. Emitter Cable * 5. 12V DC Plug* 6. Composite Video Cable * 7. Connect to V ideo Due to the  difference in ap- plications for each country , some regions may have different acces- sories. 12V T rigger is  programma ...

  • Optoma Technology HD33 - page 13

    English 13 Installation Connect to 3D V ideo Devices The 3D video  source device must be powered on before the 3D projector . If input video is  normal 2D, please press “3D Format” and switch to “Off”. If “SBS Mode” is  active, 2D video content will not display correctly . N OTE N OTE Once you have connected your devices togeth ...

  • Optoma Technology HD33 - page 14

    English 14 Installation All other product names, company names and trade names used herein are for identications purposes only and may be trademarks or registered trademarks of their respective owners. All images have been simulated. 3D Broadcast 3D Blu-ray™ Disc 3D Console Games SKY+HD, cable/satellite box 3D Blu-ray™ Player PlayStation ® ...

  • Optoma Technology HD33 - page 15

    English 15 Installation T o turn ON 3D glasses: Press the “Power” button and the LED will ash 1. one time indicating the glasses are ready to use 3D mode. V erify that 3D content is being sent to the projector and signal is compat- 2. ible with projector specications. T urn on the “3D Mode” (DLP-Link/VESA 3D - depending on which type ...

  • Optoma Technology HD33 - page 16

    English 16 Installation Powering On the Projector 1. Remove the lens cap.  2. Securely connect the power cord and signal cable. When con- nected, the Power LED will turn red. 3. T urn on the lamp by pressing “POWER” button on the back of the projector or pressing “ ” button on the remote control. The Power LED will ash blue.  The s ...

  • Optoma Technology HD33 - page 17

    English 17 Installation Powering Off the Projector 1. Press the “ ” button on the remote control or “POWER” button on the back of the projector two times with one second interval to turn off the projector . First time, it will display the following mes- sage on the screen. Press the “ ” button again to conrm the shut down. If the but ...

  • Optoma Technology HD33 - page 18

    English 18 Installation Adjusting the Projector ’ s Height The projector is equipped with elevator feet for adjusting the image height. Locate the adjustable foot you wish to modify on the underside of 1. the projector . Rotate the adjustable ring clockwise to raise the projector or 2. counter clockwise to lower it. Repeat with the remaining feet ...

  • Optoma Technology HD33 - page 19

    English 19 Installation Adjusting Projection Image Size Width Height Diagonal T op View Side View Projection Distance (D) Projection Distance (D) Screen Screen Screen (W) Screen (H) Offset (Hd) Diagonal length (inch) size of 16:9 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (feet) (m) (feet) Width Height Width Height wide tele w ...

  • Optoma Technology HD33 - page 20

    English 20 User Controls Remote Control Using the Remote Control Power On T urn on the projector . Power Off T urn of f the projector . Lamp Mode Increase the brightness of the image. Mode Select the display mode from Cinema, Bright, Photo, Reference, 3D, ISF Day , ISF Night and User . 4:3 Scale the image to 4:3 aspect ratio. 16:9 Scale the image t ...

  • Optoma Technology HD33 - page 21

    English 21 User Controls Using the Remote Control Enter Conrm your item selection. Source Press “Source” to select an input signal. Re-sync Automatically synchronizes the projector to the input source. Menu Display or exit the on-screen display menus for projector . HDMI 1 Press “HDMI 1” to choose source from HDMI 1 connector . HDMI 2 Pr ...

  • Optoma Technology HD33 - page 22

    English 22 User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2 When OSD is displayed, use ▲▼ keys to s ...

  • Optoma Technology HD33 - page 23

    English 23 User Controls Menu T ree HD33 OSD Menu Tree.xls Main Menu Sub Menu Settings IMAGE Display Mode Contrast -50~50 Brightness -50~50 Sharpness 0~15 Color -50~50 Tint -50~50 Advanced Noise Reduction 0~10 Gamma Film / Video / Graphics / Standard PureEngine Color Settings Color Temp. Warm / Medium / High RGB Gain/Bias Color Space AUTO / RGB / Y ...

  • Optoma Technology HD33 - page 24

    English 24 User Controls N OTE HD33 OSD Menu Tree.xls Main Menu Sub Menu Settings SETUP Language Input Source Source Lock On / Off High Altitude On / Off Information Hide On / Off Auto Power Off (min.) 0~180 Signal (VGA) Frequency 0~100 Phase -50~50 H. Position -50~50 V. Position -50~50 Automatic Enable / Disable Exit Signal (Video) White Level -50 ...

  • Optoma Technology HD33 - page 25

    English 25 User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Cinema: For home theater . ` Reference: This mode is intended to reproduce, as close ` as possible, the image the way the movie director intended. Color , color temperature, brightness, contrast and gamma set- tings are all congured ...

  • Optoma Technology HD33 - page 26

    English 26 User Controls N OTE “Color” and “T int”  are only support- ed for composite and component sources. Press the ◄ to decrease the contrast. ` Press the ► to increase the contrast. ` Brightness Adjust the brightness of the image. Press the ◄ to darken image. ` Press the ► to lighten the image. ` Color Adjust a video image ...

  • Optoma Technology HD33 - page 27

    English 27 User Controls Noise Reduction The Noise Reduction reduces the amount of visible noise inter- laced signals. The range is from “0” to “10”. (0: Of f) Gamma This allows you to set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma Adjustment steps to optimize your image output. Film: for h ...

  • Optoma Technology HD33 - page 28

    English 28 User Controls PureDetail PureDetail is an edge enhancement tool that enables the edges in the projected image is be enhanced thus providing more per- ceived detail. PureColor This adjustable item utilizes a new color-processing algorithm and enhancements to enable the picture’s vividness to be signicantly increased. The range is fro ...

  • Optoma Technology HD33 - page 29

    English 29 User Controls Color T emperature If set to cold temperature, the image looks more blue. (cold im- age) If set to warm temperature, the image looks more red. (warm im- age) RGB Gain/Bias Press ► into the next menu and then use ▲ or ▼ to select item. Use ◄ or ► to select Red, Green, or Blue for brightness ` (Gain) and contrast (B ...

  • Optoma Technology HD33 - page 30

    English 30 User Controls Color Space Select an appropriate color matrix type from AUT O, RGB, RGB(0-255) (*) RGB(16-235) (*) or YUV . (*) For HDMI only .  N OTE ...

  • Optoma Technology HD33 - page 31

    English 31 User Controls Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources. ` 16:9: This format is for 16x9 input sources, like HDTV and ` DVD enhanced for Widescreen TV . LBX: This format is for non-16x9, letterbox source and for us- ` ers who use external anamorphic lens to display 2.35:1 aspe ...

  • Optoma Technology HD33 - page 32

    English 32 User Controls “SuperWide” is  Off“ as default. How to use “Su-  per-Wide”: 1. Obtain a 2.0:1 aspect ratio screen. 2. Switch Super- Wide ON. 3. Align the projector image correctly on the screen. 4. Enjoy movies without black bars. N OTE 16:9 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 1440 x 1080 center 16:9 1920 x 1080 cente ...

  • Optoma Technology HD33 - page 33

    English 33 User Controls DISPLA Y | 3D 3D Mode DLP Link: Select “DLP Link” to use optimized settings for DLP ` Link 3D Glasses. (please refer to page 15). VESA 3D: Select “VESA 3D” to use optimized setting for VESA ` 3D Glasses. (please refer to page 13). 3D -> 2D 3D: Display 3D signal. ` L (Left): Display the left frame of 3D content. ` ...

  • Optoma Technology HD33 - page 34

    English 34 User Controls “3D sync. Invert”  function wouldn’t save the setting. It will set to “Off” when powers on and changes source. N OTE 3D Sync. Invert Press the “On” to invert left and right frame contents. ` Press the “Off” for default frame contents. ` ...

  • Optoma Technology HD33 - page 35

    English 35 User Controls Menu Location Choose the menu location on the display screen. Lamp Setting Press ► into the next menu and then use ▲ or ▼ to select item. Projection ` Front-Projection This is the default selection. The image is projected straight on the screen. ` Rear-Desktop When selected, the image will appear reversed. ` Front-Cei ...

  • Optoma Technology HD33 - page 36

    English 36 User Controls Background Color Use this feature to display a “Blue”, “Black”, or “Gray” screen when no signal is available. 12V T rigger Press the “Off” to disable the trigger . ` Press the “On” to enable the trigger and the programmable ` sub-menu. The sub-menu is accessed by selecting the “On” option then pressi ...

  • Optoma Technology HD33 - page 37

    English 37 User Controls Lamp Hour Display the cumulative lamp operating time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp. Lamp Mode Bright: Choose “Bright” to increase the brightness. ` STD: Choos ...

  • Optoma Technology HD33 - page 38

    English 38 User Controls SETUP Language Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use the ▲ or ▼ to select your preferred language. Press “Select (Enter)” to nalize the selection. Input Source Use this option to enable / disable input sources. Press ► into the next menu and then use ▲ or ▼ to sel ...

  • Optoma Technology HD33 - page 39

    English 39 User Controls Source Lock On: The projector will only search current input connection. ` Off: The projector will search for other signals if the current ` input signal is lost. High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the project ...

  • Optoma Technology HD33 - page 40

    English 40 User Controls SETUP | Signal -RGB Source Frequency Change the display data frequency to match the frequency of your computer ’ s graphic card. Use this function only if the image ap- pears to icker vertically . Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers, ...

  • Optoma Technology HD33 - page 41

    English 41 Appendices SETUP | Signal -V ideo Source White Level Allow user adjust White Level when inputting S-Video or V ideo/ CVBS signals. Black Level Allow user adjust Black Level when inputting S-Video or V ideo/ CVBS signals. Saturation Adjust a video image from black and white to fully saturated color . Press the ◄ to decrease the amount o ...

  • Optoma Technology HD33 - page 42

    English 42 Appendices T roubleshooting If you experience a problem with your projector , please refer to the following information. If a problem persists, please contact your local reseller or service center . Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and ` securely connected as described in ...

  • Optoma Technology HD33 - page 43

    English 43 Appendices Image has slanted sides: If possible, reposition the projector so that it is centered on the ` screen and below the bottom of the screen. Use “Display-->V Keystone” from the OSD to make an adjust- ` ment. Image is reversed Select “System-->Projection” from the OSD and adjust the ` projection direction. Blurry dou ...

  • Optoma Technology HD33 - page 44

    English 44 Appendices Other Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord ` and wait at least 20 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may ` make a loud popping sound. If this hap ...

  • Optoma Technology HD33 - page 45

    English 45 Appendices Power LED on:  No signal; OSD menu appears and signal had been detected. Power LED off:  Signal had been detected but OSD menu disappears. HDMI 1 HDMI 2 VGA YPbPr Y G Pb B Pr R VIDEO SERVICE RS-232 12V Trigger 3D SYNC Out (5V) POWER HDMI 1 HDMI 2 VGA YPbPr Y G Pb B Pr R VIDEO SERVICE RS-232 12V Trigger 3D SYNC Out (5V) P ...

  • Optoma Technology HD33 - page 46

    English 46 Appendices Power down timer active:  Lamp warning:  Power off:  On Screen Messages ...

  • Optoma Technology HD33 - page 47

    English 47 Appendices The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before ...

  • Optoma Technology HD33 - page 48

    English 48 Appendices 1 2 3 4 The projector can-  not be turned on if the lamp cover has not been placed back on the projector . Do not touch the  glass area of the lamp. Hand oil can cause the lamp to shatter . Use a dry cloth to clean the lamp module if it was accidentally touched. N OTE Lamp Replacing Procedure: 1. Switch of f the power to ...

  • Optoma Technology HD33 - page 49

    English 49 Appendices Compatibility Modes Computer Compatibility for PC  Signal Resolution Frequency H. (KHz) Refresh Rate (Hz) Video Digital Analog NTSC - 15.734 60 O - - P AL/SECAM - 15.625 50 O - - 720 x 400 31.5 70 - O O 720 x 400 37.9 85 - O O 720 x 576 50 - O O VGA 640 x 480 31.5 60 - O O 640 x 480 67 - O O 640 x 480 37.9 72.8 - O O 640 x ...

  • Optoma Technology HD33 - page 50

    English 50 Appendices Computer Compatibility for MAC  Resolution Refresh Rate (Hz) Macbook compatibility Macbook Pro (Intel) compatibility Power Mac G5 compatibility Power Mac G4 compatibility Digital Analog Digital Analog Digital Analog Digital Analog 800 x 600 60 O O O O - - O O 800 x 600 72 O O O O - O O O 800 x 600 75 O O O O - O O O 800 x 6 ...

  • Optoma Technology HD33 - page 51

    English 51 Appendices 3D Input Video Compatibility  Input Resolution HDMI 1.4a 3D Input Input T iming 1280 x 720p @ 50Hz T op-and-Bottom 1280 x 720p @ 60Hz T op-and-Bottom 1280 x 720p @ 50Hz Frame packing 1280 x 720p @ 60Hz Frame packing 1920 x 1080i @ 50 Hz Side-by-Side (Half) 1920 x 1080i @ 60 Hz Side-by-Side (Half) 1920 x 1080p @ 24 Hz T op-a ...

  • Optoma Technology HD33 - page 52

    English 52 Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 3 1 5 6 8 Pin no. Name I/O (From Projector Side) 1 NC __ 2 RXD IN 3 TXD OUT 4 NC __ 5 GND Signal Ground 6 NC __ 7 RTS __ 8 CTS __ 9 NC __ ...

  • Optoma Technology HD33 - page 53

    English 53 Appendices RS232 Protocol Function List HD33 Baud Rate 9600 Note: There is a <CR> after all ASCII com mands, 0D is the HEX code for <CR> in ASCII code Data Bits 8 Parity None Stop Bits 1 Flow Contro l None UART16550 FIFO Disable Projector Return (Pas s): P ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ Projector Return (Fail): F ~ X X X X ...

  • Optoma Technology HD33 - page 54

    English 54 Appendices ~ X X X X X n CR Lead Code Projector ID Comm and ID space variable carriage return SYSTEM Menu Location Top Left n=1 ~XX72 n P F Top Right n=2 n=3 Bottom Left n=4 Bottom Right n=5 Lamp Setting Lamp Hour Lamp hour n= 1/ n=2 ~XX108 n F Lamp Reminder On/Off n=1/n=0 & 2 ~XX109 n P F Lamp Mode Br ight/STD/ Image AI n=1/n=2/n=3 ...

  • Optoma Technology HD33 - page 55

    English 55 Appendices ~ X X X X X n CR Lead Code Projector ID Comm and ID space variable carriage return Contrast n= 1 ~XX1 26 n Format n=1 ~XX127 n Color Temperature Warm/Medium/Cold n=1 ~XX 128 n Projection Mode n=1 ~XX129 n RS232 Commands for HD3 3 Remote Remote Control Up/Page + n=10 ~XX140 n Left/Source n=11 Enter (for projection MENU) n=12 Ri ...

  • Optoma Technology HD33 - page 56

    English 56 Appendices Please note that  damage resulting from incorrect installation will invalidate the warranty . T o prevent damage to your projector , please use the Optoma ceil- 1. ing mount. If you wish to use a third party ceiling mount kit, please ensure the 2. screws used to attached a mount to the projector met the follow- ing speci ...

  • Optoma Technology HD33 - page 57

    English 57 Appendices Optoma Global Ofces USA 3178 Laurelview Ct. Fremont, CA 94538, USA www .optomausa.com Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www .optoma.ca Latin America 3178 Laurelview Ct. Fremont, CA 94538, USA www .optomausa.com Europe 42 Caxton W ay , The W atford Busi- ness Park W atford, Hertfordshi ...

  • Optoma Technology HD33 - page 58

    English 58 Appendices Deutschland Wiesenstrasse 21 W D40549 Düsseldorf, Germany Scandinavia Lerpeveien 25 3040 Drammen Norway PO.BOX 9515 3038 Drammen Norway Korea WOOMI TECH.CO.,L TD. 4F , Minu Bldg. 33-14, Kangnam-Ku, seoul,135-815, KOREA Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム サポートセンター: 0120-46-5040 ...

  • Optoma Technology HD33 - page 59

    English 59 Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r ...

  • Optoma Technology HD33 - page 60

    English 60 Appendices Declaration of Conformity for EU countries EMC Directive 2004/108/EC (including amendments) y Low V oltage Directive 2006/95/EC y R & TTE Directive 1999/5/EC (if product has RF function) y Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global e ...

Fabricant Optoma Technology Catégorie Projector

Les documents que nous recevons du fabricant de l'appareilOptoma Technology HD33 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Optoma Technology
- manuels d’utilisations HD33
- fiches produit Optoma Technology
- dépliants
- ou étiquettes-énergie Optoma Technology HD33
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Optoma Technology HD33.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Optoma Technology HD33, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Optoma Technology HD33. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Optoma Technology HD33.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Optoma Technology HD33, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Optoma Technology HD33 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Optoma Technology HD33.

Le manuel d’utilisation complet Optoma Technology, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Optoma Technology HD33 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Optoma Technology HD33, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lOptoma Technology HD33 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Optoma Technology HD33 - qui devraient nous aider dans les premières étapes lors de l'utilisation Optoma Technology HD33
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Optoma Technology HD33
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Optoma Technology HD33 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Optoma Technology HD33?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Optoma Technology HD33, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Optoma Technology HD33 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)