-
Panasonic AWRP120GJ - page 1
REMOTE CAMERA CONTROLLER AW-RP120 Operating Instructions <Operations and Settings> Remote Camera Controller Model No. AW-RP120G VQT4T93A (E) M0113HO0 -FJ ENGLISH How the O perati ng Ins tructio ns are confi gured <Basic s>: The <B asics> descri bes th e proc edure f or con nectio n with the re quired equipm ent an d for instal ...
-
Panasonic AWRP120GJ - page 2
2 About trademarks and registered trademarks z Microsoft ® , Windows ® , Windows ® 7, and Internet Explorer ® are registered trademarks or trademarks of Microsoft Corporation in the United States, Japan, and/or other countries. z Intel ® and Intel ® Core TM are trademarks or registered trademarks of Intel Corporation and its subsidiaries in t ...
-
Panasonic AWRP120GJ - page 3
3 Contents How to turn on and off the power of the remote cameras . . . . . . . . . 4 How to turn on the power of the remote cameras . . . . . . . . . . . . . . . . 4 How to turn off the power of the remote cameras . . . . . . . . . . . . . . . . 5 Making image adjustments for the selected remote camera . . . . . . 6 S e t t i n g t h e g a i n ... ...
-
Panasonic AWRP120GJ - page 4
4 How to turn on and off the power of the remote cameras How to turn on the power of the remote cameras The power of the remote cameras in the standby state can be be turned on from the unit. There are the following methods of turning on the power . z T urning on the power one camera at a time z T urning on the power of the cameras simultaneously w ...
-
Panasonic AWRP120GJ - page 5
5 How to turn off the power of the remote cameras The power of the remote cameras can be be turned off from the unit. There are the following methods of turning off the power . z T urning off the power one camera at a time z T urning off the power of multiple cameras T urning off the power of all the cameras T urning off the power of the se ...
-
Panasonic AWRP120GJ - page 6
6 Making image adjustments for the selected remote camera The following settings and adjustments can be made for the selected remote camera directly from this unit. z Gain z Pedestal z R and B gain z R and B pedestal z White balance z Black balance z Color bar selection z Detail z Shutter speed z Shooting mode selection The dedicated buttons and di ...
-
Panasonic AWRP120GJ - page 7
7 Setting the gain In places which are too dark, increase the gain level, and in places which are too bright, reduce the gain level. When the gain is increased, the noise level also increases. 1. Press the GAIN button. The current gain setting appears. GAIN : 18dB 2. T urn the F1 dial to select a setting. z When the AUT O GAIN button is pressed, au ...
-
Panasonic AWRP120GJ - page 8
8 Manually adjusting the white balance (R and B gain settings) 1. As with the automatic adjustment, fill the screen with a white subject. 2. Connect the video output of the currently selected remote camera to a waveform monitor . 3. Press the WHITE BAL A button to turn on its indicator . 4. T urn the R GAIN dial to select the R channel (red) settin ...
-
Panasonic AWRP120GJ - page 9
9 Making image adjustments for the selected remote camera (continued) Selecting the color bars Press the BARS button to output color bar signals from the remote camera. Button indicator on : Outputs the color bar signal Button indicator off : Outputs the signal for the images shot by the camera Setting the detail The image detail (image sharpness) ...
-
Panasonic AWRP120GJ - page 10
10 Setting the shooting mode (SCENE 1 to SCENE 4) Change the shooting mode (scene file) of the remote camera to match the shooting conditions. Use the SCENE 1 to SCENE 4 buttons to change the shooting mode. SCENE 1 button SCENE 2 button SCENE 3 button SCENE 4 button SHIFT button 1. Press the SHIFT button to turn on its indicator . 2. Press one of t ...
-
Panasonic AWRP120GJ - page 11
1 1 Making image adjustments for the selected remote camera (continued) Setting an ND filter The ND filter setting can be configured when the selected remote camera uses a lens with an ND filter function. 1. Press the MENU button to turn on its indicator . 2. Open ND FIL TER menu [22]. 1.ND FILTER ND1 3. T urn the F2 dial to select a setting, and t ...
-
Panasonic AWRP120GJ - page 12
12 Operating the osd menu of a remote camera T o set the advanced settings of a remote camera, operate the menu superimposed on the image output of the remote camera (this menu is referred to as the OSD menu in this manual). The OSD menu of a connected remote camera can be operated from the unit. CAMERA OSD button F1 dial F2 dial EXIT button 1. Hol ...
-
Panasonic AWRP120GJ - page 13
13 Operating preset memory (PMEM) The preset memory of a remote camera can be operated from the unit. The following settings that you have adjusted in advance can be stored in preset memory . z Pan/tilt positions z Zoom positions z Focus positions z Lens iris settings (manual iris only) z White balance settings z If the MEM ENABLE button indicator ...
-
Panasonic AWRP120GJ - page 14
14 Registering preset memory (STORE) 1. Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated. 2. Output the images to be shot to the monitor . 3. Press the PMEM button to turn on its indicator . 4. Press the MEM STORE button to turn on its indicator . 5. Operate the P AN/TIL T lever and Z ...
-
Panasonic AWRP120GJ - page 15
15 Setting the operation items for when preset memory is recalled (PRESET SCOPE) Y ou can select whether to recall all or only some of the settings registered to preset memory . z This function is enabled when A W-HE50, A W-HE60, or A W-HE120 is selected. Note 1. Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the r ...
-
Panasonic AWRP120GJ - page 16
16 Operating preset memory groups (PMEM GROUP) The unit allows you register up to four “preset memory groups” created by selecting one preset memory for each of multiple remote cameras. Pressing any of the PM GRP 1 to PM GRP 4 buttons simultaneously recalls all preset memory registered to the corresponding preset memory group. The following set ...
-
Panasonic AWRP120GJ - page 17
17 Operating preset memory groups (PMEM GROUP) (continued) Registering the preset memory to recall when in ALL mode 1. Press the MENU button to turn on its indicator . 2. Open PM GRP1 menu [31]. 1.PM GRP1 MODE ALL 3. T urn the F1 dial to display the “12. PM GRP1 ALL” item. 12.PM GRP1 ALL PRE001 4. T urn the F2 dial to select a preset number , a ...
-
Panasonic AWRP120GJ - page 18
18 Operating tracing memory (TMEM) The unit incorporates tracing memory (TMEM) for recording a series of operations that were performed for a connected remote camera. This feature allows you to duplicate the recorded operations of a remote camera. <T racing memory> Recording target Camera numbers CAM1 to CAM10 Functions that can be recorded P ...
-
Panasonic AWRP120GJ - page 19
19 Operating tracing memory (TMEM) (continued) 7. Press ST ART button [1 1]. The indicator of ST ART button [1 1] turns on. (Operation wait state) TM05: Waiting Opr. 8. Operate one of the P AN/TIL T lever , ZOOM button, FOCUS dial, IRIS dial, and white balance mode selection buttons. The recording of tracing memory starts from the point in time tha ...
-
Panasonic AWRP120GJ - page 20
20 Operating tracing memory (TMEM) (continued) Deleting tracing memory (DELETE) 1. Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated. 2. Press the TMEM button to turn on its indicator . The tracing memory status appears. The indicators of number buttons with registered tracing memory t ...
-
Panasonic AWRP120GJ - page 21
21 Operating tracing memory (TMEM) (continued) 7. Operate one of the P AN/TIL T lever , ZOOM button, FOCUS dial, IRIS dial, and white balance mode selection buttons to make a correction. Only the data for which the operation was performed is overwritten from the point in time that correction operation was performed. z T racing data cannot be partia ...
-
Panasonic AWRP120GJ - page 22
22 Configuring the remote camera operation settings Adjusting the operation speed of the pan, tilt, zoom, and focus The dedicated dials can be used to individually adjust the operation speed of the remote camera for each of the P AN/TIL T lever , ZOOM button, and FOCUS dial operations performed with the unit. ZOOM SPEED dial FOCUS SPEED dial P AN/T ...
-
Panasonic AWRP120GJ - page 23
23 Configuring the remote camera operation settings (continued) Setting the pan, tilt, zoom, and focus operation directions Y ou can set the direction that a remote camera moves in response to the operation of the P AN/TIL T lever , ZOOM button, and FOCUS dial. With this unit, you can set the direction for each camera number . Setting the panning d ...
-
Panasonic AWRP120GJ - page 24
24 Setting the focusing direction Set the focusing operation of the lens in response to the operation of the FOCUS dial. 1. Press the MENU button. 2. Open FOCUS DIRECTION menu [29]. 3. T urn the F1 dial to display the camera number for which to configure the setting. 1.CAM1 NORMAL 4. T urn the F2 dial to select “NORMAL” or “REVERSE”, and th ...
-
Panasonic AWRP120GJ - page 25
25 Setting the movement ranges (limiter function) of a remote camera Depending on the installation location, there may be an obstruction in a movement range of a remote camera, and the remote camera may come into contact with that obstruction when the pan or tilt operation is performed. A malfunction or accident may occur if the remote camera comes ...
-
Panasonic AWRP120GJ - page 26
26 Returning a remote cameras to its home position Position the remote camera in the vertical and horizontal directions so that its shooting direction becomes forward (home position). z The position stored as the home position on the remote camera cannot be changed. Note 1. Press the MENU button. 2. Open CAMERA SETUP menu [24]. 3. T urn the F1 dial ...
-
Panasonic AWRP120GJ - page 27
27 Configuring the unit operation settings Enabling or disabling operation with the ENABLE buttons The unit has five ENABLE buttons. Each of the ENABLE buttons can be used to independently enable or disable the corresponding operation shown below . USER ENABLE button z Operation of USER buttons MEM ENABLE button z Operation of memory (preset memory ...
-
Panasonic AWRP120GJ - page 28
28 Configuring the unit operation settings (continued) Enabling or disabling operation of the ENABLE buttons by menu operation Operation of the ENABLE buttons can be enabled or disabled by menu operation. Disabling operation prevents erroneous operation because the enable/ disable states become unable to be changed even by pressing the ENABLE butto ...
-
Panasonic AWRP120GJ - page 29
29 Configuring the unit operation settings (continued) Switching the focus operation and iris operation The operations of the FOCUS dial and IRIS dial can be switched. 1. Press the MENU button. 2. Open RP SETUP menu [25]. 3. T urn the F1 dial to display the “1. FOCUS/IRIS” item. 1.FOCUS/IRIS STANDARD 4. T urn the F2 dial to select “EXCHANGE? ...
-
Panasonic AWRP120GJ - page 30
30 Assigning functions to the USER buttons Functions can be assigned to the eight USER buttons (USER 1 to USER 8). This enables you to operate a desired function by simply pressing a USER button (USER 1 or USER 8). USER buttons (USER 1 to USER 8) 1. Press the MENU button. 2. Open USER BUTTON menu [35]. 3. T urn the F1 dial to display the USER butto ...
-
Panasonic AWRP120GJ - page 31
31 Setting linking with a switcher Configure the settings for linking the unit with an optional switcher . T o use the function for linking with a switcher , you need to set the following in advance. Settings for the connection between unit and switcher Refer to “Settings for connecting with the remote cameras and switcher” in Basics (page ...
-
Panasonic AWRP120GJ - page 32
32 Setting the functions for when the unit is linked with the switcher Set the functions that can be used when there is a link between the unit and switcher . Each of the functions needs to be set in advance in SW FUNCTION menu [42] and SW INPUT menu [43]. ⇒ “Registering the camera numbers that will correspond to the image inputs of the switche ...
-
Panasonic AWRP120GJ - page 33
33 FOCUS ASSIST function Control the AUX bus of the switcher and switch between the images of multi view and the images of the selected remote camera. Assigning this function to a USER button makes it optimal for adjusting the focus and other settings because you can fill the screen with the images of the selected remote camera with just the press ...
-
Panasonic AWRP120GJ - page 34
34 T ALL Y IP function Enable T ALL Y IP to receive OA tally information from the switcher via the network. The lighting statuses of the camera status indicators on the unit and the tally lamps on the remote cameras are changed based on the received OA tally information. Enabling or disabling the T ALL Y IP function 1. Press the MENU button. 2. Ope ...
-
Panasonic AWRP120GJ - page 35
35 CAM INF function Y ou can display the remote camera setting information acquired by the unit on the switcher AUX bus output images or multi view images. Enabling or disabling the CAM INF function 1. Press the MENU button. 2. Open SW FUNCTION menu [42]. 3. T urn the F1 dial to display the “8. CAM INF” item. 8.CAM INF Off 4. T urn the F2 dial ...
-
Panasonic AWRP120GJ - page 36
36 Memory card operations The unit allows you to use a memory card to perform the following operations. SA VE : Save the configuration data of the unit or a remote camera to a memory card. LOAD : Load the configuration data saved to a memory card to the unit or a remote camera. <Data T arget for SA VE and LOAD> Data type Description of data F ...
-
Panasonic AWRP120GJ - page 37
37 Initializing a memory card (INIT) Before using a memory card with the unit, be sure to initialize the memory card with the unit. When the memory card is initialized, the memory card is formatted (in compliance with SD standards) and dedicated directories are created. z If you initialize a memory card, all of the files stored in the memory card w ...
-
Panasonic AWRP120GJ - page 38
38 Loading data from a memory card (LOAD) 1. Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select a remote camera. 2. Press the MENU button to turn on its indicator . 3. Open SD LOAD menu [47]. LOAD MODE:SETUP 4. T urn the F1 dial to select the type of data to load from the memory card, and then press the F1 dial to conf ...
-
Panasonic AWRP120GJ - page 39
39 T ally settings The unit can receive the tally information of the switcher and other external devices from the T ALL Y/GPI connector (T ALL Y input) on the rear panel and two network lines. T o enable turning on the camera status indicators on the unit and the tally lamps on the remote cameras based on the received tally information, you need to ...
-
Panasonic AWRP120GJ - page 40
40 Checking alarm information In the event of an error with the power supply of the unit or a remote camera included in the selected camera group, the ALARM indicator on the unit turns on and the output of the GPI OUT connector (GPI OUT 5) becomes On. When an error occurs, you can check the alarm information by menu operation. Displaying alarm info ...
-
Panasonic AWRP120GJ - page 41
41 Returning the unit to the factory default state (INITIALIZE) Y ou can restore the settings stored on the unit to the factory defaults (INITIALIZE) When executing INITIALIZE, select one of “ALL” or “SETUP”. ALL : Restores all settings to the factory default state (executes INITIALIZE). SETUP : Restores only some settings to the factory de ...
-
Panasonic AWRP120GJ - page 42
42 <Setting items stored on the unit (cont.)> √: T arget, ―: Not target Button number Menu name Setting item INITIALIZE ALL SETUP [49] SYSTEM 2. SYSTEM VER ― ― 3. PROGRAM VER ― ― 4. FPGA VER ― ― z For the factory default settings, refer to “T able of setting items (menus)” (pages 53 to 55). Returning the unit to the factor ...
-
Panasonic AWRP120GJ - page 43
43 Control interface for external devices T ALL Y/GPI (JST : JBY ‑25S‑1A3F(LF)(SN)) 13 1 25 14 Pin number Signal name Description of signal Operation 1 T ALL Y IN 1 T ALL Y IN1 to T ALL Y IN10 tally inputs ⇒ “T ally settings” (page 39) Contact input (Status operation) 14 T ALL Y IN 2 2 T ALL Y IN 3 15 T ALL Y IN 4 3 T ALL Y IN 5 16 T ...
-
Panasonic AWRP120GJ - page 44
44 Control interface for external devices (continued) Registering camera numbers to CAM OUT1 to CAM OUT10 1. Press the MENU button. 2. Open GPI OUT menu [45]. 3. T urn the F1 dial to display the “1. CAM OUT1” item. 1.CAM OUT1 CAM1 4. T urn the F2 dial to select the camera number to set for CAM OUT1, and then press the F2 dial to confirm the sel ...
-
Panasonic AWRP120GJ - page 45
45 Setup Software Setup Software is an application that allows you to configure the settings for connecting the unit with remote cameras and a switcher from a personal computer . When using Setup Software to configure the settings from a personal computer , observe the following. z Do not perform any operation on the unit. z Do not start Setup Soft ...
-
Panasonic AWRP120GJ - page 46
46 Setup Software (continued) Registering the unit in Setup Software On the “IP Address” tab, register the IP addresses of units to be set from Setup Software. The units registered here can be selected from the list box on the “Setting” tab. Up to five units can be registered. 1. Enter the IP addresses in the IP address boxes. In the RP1 to ...
-
Panasonic AWRP120GJ - page 47
47 Setup Software (continued) Settings for connecting with the remote cameras and switcher On the “Setting” tab, configure the settings for the connections between the unit and the remote cameras and switcher . ...
-
Panasonic AWRP120GJ - page 48
48 Setup Software (continued) Displaying the “Setting” tab 1 2 3 4 5 6 7 8 9 10 1 1 12 13 1 Setting target selection list box Select the unit for which to configure the connection settings. Click to display the IP addresses of the units that can be set from this software. Select the IP address of the unit you want to set from this list. Any of ...
-
Panasonic AWRP120GJ - page 49
49 Setup Software (continued) Executing auto IP setting Y ou can execute “auto IP setting” of the unit from Setup Software. Updating the IP addresses of the remote cameras and switcher automatically from the unit 1. Click [RENEW]. The IP addresses are displayed for the link target camera numbers and switcher . z When [CANCEL] is clicked, th ...
-
Panasonic AWRP120GJ - page 50
50 Setting user authentication T o control remote cameras that have the user authentication function enabled, you need to set the user name and password on the AW -RP120. Configure this setting on the “User Auth.” tab of this application. 1. Enter the user name in the User Name box. 2. Enter the password in the Password box. Entered characters ...
-
Panasonic AWRP120GJ - page 51
51 Operations of A W‑HE2 A W-HE2 HD integrated cameras can be operated from the unit. This section describes the operations which are different from the corresponding operations of other remote cameras. z The method for connecting A W-HE2 and the unit is the same as that for connecting A W-HE2 and A W-RP50. Refer to the operating instructions sup ...
-
Panasonic AWRP120GJ - page 52
52 T able of setting items (dedicated dials and buttons) Dial/button Setting item Remote camera Setting R/B GAIN dial R GAIN B GAIN A W-HE120 –150 to +150 A W-HE50 (*) , AW -HE60 –30 to +30 A W-HE2 “---” A W-HE100 –30 to +30 A W-HE870 –150 to +150 A W-E860, AW -E750, A W-E650, AW -E350 –150 to +150 AK-HC1500, AK-HC1800 –150 to +150 ...
-
Panasonic AWRP120GJ - page 53
53 T able of setting items (menus) Button number Menu name Setting item Remote camera Initial value on unit (*1) Setting [21] SHUTTER 1. SHUTTER AW-HE120 – Off, Step, Synchro, ELC A W-HE50, AW -HE60 – Off, Step, Synchro A W-HE2 – “---” A W-HE100 – Off, Step, Synchro A W-HE870 – Off, Step, Synchro, ELC A W-E860, AW -E750, A W-E650, AW ...
-
Panasonic AWRP120GJ - page 54
54 T able of setting items (menus) (continued) Button number Menu name Setting item Remote camera Initial value on unit (*1) Setting [30] PTZ ADJUST 1. Z MIN SPEED Off Off, 1 to 8 2. SPEED WITH Z AW -HE120 – Off, On A W-HE50, AW -HE60 – Off, On A W-HE2 – “---” A W-HE100 – Off, 1, 2 A W-PH360, AW -PH400, A W-PH405, AW -PH650 – Off, 1, ...
-
Panasonic AWRP120GJ - page 55
55 T able of setting items (menus) (continued) Button number Menu name Setting item Remote camera Initial value on unit (*1) Setting [38] SW AP IP 1. CAM1 192.168.0.10 … … 100. CAM100 192.168.0.109 [39] MANUAL IP 1. CAM1 192.168.0.10 … … 100. CAM100 192.168.0.109 [40] PORT NO 1. CAM1 80 1 to 65535 … … … 100. CAM100 80 1 to 65535 [41] ...
-
Panasonic AWRP120GJ - page 56
56 Messages When starting up and switching camera groups Indication Description Don't touch PTZ Lever! Do not operate the P AN/TIL T lever and the ZOOM button because they are being initialized. Connecting to cameras The unit is connecting to the remote cameras. Operation lock Indication Description LOCKED! Operation is disabled. (This appears ...
-
Panasonic AWRP120GJ - page 57
57 Memory card Indication Description NO CARD! No card is inserted. INITIALIZING... NOT REMOVE CARD. Initializing. SA VING... NOT REMOVE CARD. Saving data to the memory card. Do not remove the memory card. LOADING... NOT REMOVE CARD. Reading data from the memory card. Do not remove the memory card. COMPLETE. Initializing, saving, or loading is comp ...
-
Panasonic AWRP120GJ - page 58
58 Index Menu [21] SHUTTER 1. SHUTTER ................................................................................... 9 2. SPEED ........................................................................................ 9 [22] ND FIL TER ................................................................................... 1 1 [23] FUNCTION ...
-
Panasonic AWRP120GJ - page 59
59 S SCENE 1 button .................................................................................. 10 SCENE 2 button .................................................................................. 10 SCENE 3 button .................................................................................. 10 SCENE 4 button ................... ...
-
Panasonic AWRP120GJ - page 60
Web Site: http://panasonic.net プロフェッショナルAVビジネスユニット 〒 571-8503 大阪府門真市松葉町 2 番 15 号 ☎ (06) 6901－1161 © Panasonic Corporation 2013 ...
Avez-vous une question à propos de Panasonic AWRP120GJ?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Panasonic AWRP120GJ, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Panasonic AWRP120GJ il est probable qu’il a envie de partager la façon de le résoudre.