Français dropdown-ico

Manuel d’utilisation Northern Industrial Tools 157494

21 pages 0.67 mb
Télécharger

Aller à la page of 21

Summary
  • Northern Industrial Tools 157494 - page 1

    Prov en Pe rf or mance K-BAR Industries, Faribault, MN, 55021 M157494H Installation, Operation, and Maintenance Manual INDUSTRIAL WATER HEATER: Upgrades cold water pressure washers into hot water/steam cleaners. To the Owner: Thank you for purchasing a NorthStar water heater. Your machine is designed for long life, dependability, and the top perfor ...

  • Northern Industrial Tools 157494 - page 2

    2 Table of Contents Important Safety Instructions 2 Safety Features 12 Grounding Instructions 3 Maintenance Instructions 13-15 Extension Cords 3 Moving and Handling Instructions 16 Specifications 4 Long Term Storage 16 Machine Component Identification 5 Troubleshooting Guide 17 Installation Instructions 6-9 Parts Breakdowns 18-19 Operation Instruct ...

  • Northern Industrial Tools 157494 - page 3

    3 Grounding Instructions This product must be grounded. If it shoul d malfunction or breakdown, grounding prov ides a path of least resistance for electric current to reduce the risk of electrical shock. This product is equi pped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate o ...

  • Northern Industrial Tools 157494 - page 4

    4 Specifications Item Number 157494 Max. Pressure Rating 3000 PSI Max. Flow Output 4 GPM BTU Output 353,700 BTU Temperature Rise 190 ° F @ 2GPM 190 ° F @ 3GPM 140 ° F @ 4GPM Maximum Temperature 250 ° F Approved Fuels #1 or 2 Diesel, Kerosene, Fuel Oil Fuel Capacity 4 gal. Power Requirements NEMA Receptacle 5-15R Volts 115V Amps 5A Hertz 60Hz Ph ...

  • Northern Industrial Tools 157494 - page 5

    5 Machine Component Identification 157494 Description Ref # Description Ref # Description 1 Water Outlet 6 Fuel Tank 11 Safety Relief Valve 2 Control Box 7 Burner 12 Heating Coil 3 Heat Switch 8 Fuel Filter 13 Water Inlet (pressure washer) 4 Thermostat 9 Exhaust Vent 14 Power Cord (w/ GFCI) 5 Fuel Fill Cap 10 Flow Switch ...

  • Northern Industrial Tools 157494 - page 6

    6 Installation Instructions I.) Unpack Separate and identify all components. Use the assembly instructions in this manual for assembly. Handle & Grip Qty-2 Hardw are Bag Qty-1 Wheel Qty-2 Water Heater Qty-1 Remov e 2 retaining blocks. ...

  • Northern Industrial Tools 157494 - page 7

    7 Hardware Bag Owner’s Manual 4X - 5/16 X .75” Flange Bolt 4X - 5/16 Flan g e Nut 2X - 5/8 X 3.5” Hex Bolt 2X - 5/8 Hex Nut 2X - 5/8 Jam Nut ...

  • Northern Industrial Tools 157494 - page 8

    8 II.) Assembly Instructions 1. Attach handles, see above. 2. Attach wheels, see above. 3. Remove water heater from the pallet. It is recommended that a hoist is used, or that two people lift the unit off of the pallet. If a hoist is used, use the attachment points shown in the Moving and Handling section on page 16. Do not try to lift the unit by ...

  • Northern Industrial Tools 157494 - page 9

    9 III.) Getting Started IMPORTANT: Proper initial installation of equipment will assure more satisfactory performance, longer service life, and lower maintenance cost. Make sure the water heater is on a level surface and in a protected area where it is not readily influenced by outside forces such as freezing temperatures, strong winds, rain, etc. ...

  • Northern Industrial Tools 157494 - page 10

    10 Operating Instructions Follow these instructions every time y ou use the water heater. I.) Pre-Operation ; A.) Position the machine for easy access to all controls. ; B.) Position the machine on a solid surface, with less than a three degree slope, and so it is protected from external damage. ; C.) Position the machine so that ambient lighting i ...

  • Northern Industrial Tools 157494 - page 11

    11 IV.) To Start DANGER: Do not point the spray wand at yourself or at any person. Bodily injury may result from hot water or water under high pressure. WARNING: Wear eye, ear, hand, foot, and skin protection at all times while operating this water heater. 1. Turn water supply ON. 2. Squeeze the trigger to allow air to purge from the system. This s ...

  • Northern Industrial Tools 157494 - page 12

    12 Safety Features I.) Safety Relief The safety relief valve is a backup safety feature. If the system’s pressure exceeds it s limits, the safety relief valve will open and relieve system pressure. WARNING: If the safety relief valve ever discharges water, turn the unit off and do not use the machine. See a dealer or call Customer Service at 1-80 ...

  • Northern Industrial Tools 157494 - page 13

    13 Maintenance Instructions WARNING: Unauthorized machine modification or use of non-approved replacement parts may cause personal injury and/or property damage and will void the manufacturer warranty . All mechanical equipment, no matter how well designed, will need r epairs. A NorthStar water heater is no exception. At times, a NorthStar water he ...

  • Northern Industrial Tools 157494 - page 14

    14 VII.) Coil Descaling In hard water areas, scale build-up within the heating coil will occur. Scale deposits will decrease the water temperature rise and may eventually clog the heating coil. 1. Mix scale remover in a 5 gallon bucket and elevate the bucket so it is higher than the pump on your pressure washer. 2. Attach water heater’s inlet hos ...

  • Northern Industrial Tools 157494 - page 15

    15 IX.) Electrodes On a yearly basis the electrodes should be inspected and any necessary adjustments made. 1. Block up the front of the water heater 6 inches. 2. Remove the 4 nuts that attach the burner to the heating chamber. You do not have to disconnect the fuel lines or the electric cords, but be careful not to subject them to excessive strain ...

  • Northern Industrial Tools 157494 - page 16

    16 Moving and Handling Instructions I.) Maneuvering Your Water Heater 1. Lift handles with both hands until the wheels come in contact with the ground and the frame is lifted off of the ground. 2. Push the water heater forward if it is being moved on solid, smooth ground. (concrete, hard-packed dirt) 3. Pull the water heater backward if it is being ...

  • Northern Industrial Tools 157494 - page 17

    17 Troubleshooting Guide Water Heater Will Not Run - No Power Causes Solutions Machine not plugged in Plug machine in. GFCI tripped Make sure machine is dry. Press RESET on the GFCI. Machine turned OFF Turn heat switch ON. Line circuit breaker tripped Check for tripped circuit breaker in building. GFCI Trips During Operation Causes Solutions Voltag ...

  • Northern Industrial Tools 157494 - page 18

    18 157494H 157494 Parts Breakdown ...

  • Northern Industrial Tools 157494 - page 19

    19 157494H ITEM PART# DESCRIPTION QTY 1 5027 1/2” NPT Steel Street Elbow 1 2 38379 1/2” FPT Swivel x 3/8” MPT Straight 1 3 37537 Flow Switch 1 4 777347 3/8” NPT Street Tee 1 5 22392 Safety Relief Valve 1 6 37538 High Pressure Inlet Hose, 3/8” X 5’ 1 7 30822 Power Cord w/ GFCI, 15A, 115V 1 8 313108 3/8” Quick Coupler, Female 1 9 22502 ...

  • Northern Industrial Tools 157494 - page 20

    20 ...

  • Northern Industrial Tools 157494 - page 21

    21 ...

Fabricant Northern Industrial Tools Catégorie Gas Heater

Les documents que nous recevons du fabricant de l'appareilNorthern Industrial Tools 157494 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Northern Industrial Tools
- manuels d’utilisations 157494
- fiches produit Northern Industrial Tools
- dépliants
- ou étiquettes-énergie Northern Industrial Tools 157494
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Northern Industrial Tools 157494.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Northern Industrial Tools 157494, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Northern Industrial Tools 157494. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Northern Industrial Tools 157494.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Northern Industrial Tools 157494, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Northern Industrial Tools 157494 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Northern Industrial Tools 157494.

Le manuel d’utilisation complet Northern Industrial Tools, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Northern Industrial Tools 157494 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Northern Industrial Tools 157494, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lNorthern Industrial Tools 157494 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Northern Industrial Tools 157494 - qui devraient nous aider dans les premières étapes lors de l'utilisation Northern Industrial Tools 157494
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Northern Industrial Tools 157494
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Northern Industrial Tools 157494 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Northern Industrial Tools 157494?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Northern Industrial Tools 157494, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Northern Industrial Tools 157494 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)