Manuel d’utilisation Energy Tech Laboratories 105E

14 pages 0.12 mb
Télécharger

Aller à la page of 14

Summary
  • Energy Tech Laboratories 105E - page 1

    E N Intr oduction The 105E colour monitor displays sharp and brilliant images of text and graphics with a maximum resolution up to 1024x768 pixels. It is optimal for Windows, spread sheets, and any other application. This monitor automatically scans horizontal frequencies from 30KHz to 54KHz,and vertical frequencies from 50Hz to 120Hz.With micropro ...

  • Energy Tech Laboratories 105E - page 2

    E N Note: If you experienced your monitor display is changing from color to mono, it's possible that you are using a non-VESA-DDC-standard video card. Please consult with your local PCEC dealer for more information. E NERGY S TA R is a U . S . registered mark. A s an E NERGY S TA R ® P artner , PCEC has determined that this product meets the ...

  • Energy Tech Laboratories 105E - page 3

    E N Safety precautions and maintenance ◆ Disconnect the monitor from the mains supply if the monitor is not to be used for an extended period of time. ◆ Do not attempt to remove the back cover , as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. ◆ Do not place objects on top of the ...

  • Energy Tech Laboratories 105E - page 4

    E N 4 Installation Important: Please refer to the user’ s manuals of y our computer and video adapter to make sure these equipments are properl y installed and configured before installing the monitor . Positioning / V entilation ◆ Avoid exposing the monitor to direct sunlight, stoves or any other heat sources. ◆ T o prevent overheating, make ...

  • Energy Tech Laboratories 105E - page 5

    E N Connection Intel Based platform: 386, 486, Pentium, or other compatibles: • Connect the monitor to the computer using the supplied interface cables. Important: Please make sure the A C power to your computer is “OFF” before connecting or disconnecting an y display peripheral. F ailure to do so may cause serious personal injury as well as ...

  • Energy Tech Laboratories 105E - page 6

    E N Connection to the mains (Rear of the monitor) Connecting to the mains This monitor is set to operate at a mains supply of ; 100-240 volts AC .If the mains voltage in your home is not between this, consult your dealer. Connect one end of the mains cord to the mains socket at the rear of monitor, and the other end to the mains supply. The monitor ...

  • Energy Tech Laboratories 105E - page 7

    E N Front Control locations and functions 7 For an optimized adjustment of the picture following controls are available at the front. POWER. Press this knob, the green LED lights and the power is ON. Press this knob again, the green LED disappears and the power is OFF. How to use Digital control: 1. When pressing the "FUNC" key, the LED w ...

  • Energy Tech Laboratories 105E - page 8

    E N 8 H-Size : to adjust the horizontal amplitude of the image. H-Center : to adjust the horizontal position of the image. V-Size : to adjust the vertical amplitude of the image. V-Center : to adjust the vertical position of the image. Pincushion: to correct the barrel distortion of the image. Trapezoid : to correct the trapezoid distortion. Recall ...

  • Energy Tech Laboratories 105E - page 9

    E N (A) User mode: (12 modes) The set will save the user's setting parameters automatically. Press + to recall factory preset mode. Adjustment The monitor is pre-set with 7 modes for optimal display size and centering as indicated in the following table: Resolution Horizontal Vertical Mode (dots x lines) Freq.(KHz) Freq.(Hz) Remark VGA 720 x 4 ...

  • Energy Tech Laboratories 105E - page 10

    E N (B) Power Management Signalling Power Management Definition VESA DPMS POWER SAVING STATES MODE VIDEO H-SYNC V-SYNC POWER USED POWER SAVING(%) ON Active Yes Yes < 100 Watts 0 % Stand-by Blanked No Yes < 15 Watts > 80 % Suspend Blanked Yes No < 15 Watts > 80 % OFF Blanked No No < 5 Watts > 90 % Note: The video will be blanked ...

  • Energy Tech Laboratories 105E - page 11

    E N T echnical information (I) General: Picture tube : 15 inch (38.1 cm), 90 ° deflection, non- glare, black matrix,light transmission 57%, phosphor P22 medium short, dotted pitch 0.28 mm. Screen area Recommended Display Area: 260 mm (H) x 195 mm (V) Maximum Display Area : 283 mm (H) x 215 mm (V) Line (Horizontal) frequency : 30 - 54 KHz (automati ...

  • Energy Tech Laboratories 105E - page 12

    E N (III) Pin assignment: (1) The 15-pin D-sub connector (male) of the signal cable (IBM systems): 1 Red video input 9 No pin 2 Green video input 10 Logic ground 3 Blue video input 11 Identification output 4 Identification output - connected to pin 10 - Connected to pin 10 12 Serial data line (SDA) 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V. ...

  • Energy Tech Laboratories 105E - page 13

    E N English Introduction .... 1 Feature Highlights .... 1 Safety precautions and maintenance .... 3 Package .... 3 End of life disposal .... 3 Installation .... 4 Connection .... 5 Connection to the mains .... 6 Front Control locations and functions .... 7 Adjustment .... 9 T echnical information .... 1 1 Digital Auto Scan Colour Monitor Contents 1 ...

  • Energy Tech Laboratories 105E - page 14

    E N OTHER LANGUAGE VERSIONS FRENCH(FRANCAIS) .... 13 Appendix English Information for Users in the U.S. ........ A1 FCC Declaration ........ A2 WARRANTY ........ A5 Deutsch Hinweis / GS / ACHTUNG ........ A3 Français FCC Declaration ........ A4 ...

Fabricant Energy Tech Laboratories Catégorie Computer Monitor

Les documents que nous recevons du fabricant de l'appareilEnergy Tech Laboratories 105E peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Energy Tech Laboratories
- manuels d’utilisations 105E
- fiches produit Energy Tech Laboratories
- dépliants
- ou étiquettes-énergie Energy Tech Laboratories 105E
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Energy Tech Laboratories 105E.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Energy Tech Laboratories 105E, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Energy Tech Laboratories 105E. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Energy Tech Laboratories 105E.

Manuel d’utilisation complet de l’appareil Energy Tech Laboratories 105E, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Energy Tech Laboratories 105E par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Energy Tech Laboratories 105E.

Le manuel d’utilisation complet Energy Tech Laboratories, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Energy Tech Laboratories 105E - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Energy Tech Laboratories 105E, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEnergy Tech Laboratories 105E qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Energy Tech Laboratories 105E - qui devraient nous aider dans les premières étapes lors de l'utilisation Energy Tech Laboratories 105E
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Energy Tech Laboratories 105E
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Energy Tech Laboratories 105E dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Energy Tech Laboratories 105E?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Energy Tech Laboratories 105E, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Energy Tech Laboratories 105E il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)