-
Graco 1602 - page 1
23 4 © 1999 Graco 132-7-99 I S1651 Failure to follow these warnings and the assembly instructions could result in serious injury or death. THIS PRODUCT REQUIRES ADUL T ASSEMBL Y . FOLLOW ASSEMBL Y INSTRUCTIONS CAREFULL Y . If you experience any difficulties, please contact the Customer Service Department. DO NOT USE SWING without the seat cover . ...
-
Graco 1602 - page 2
23 4 © 1999 Graco 132-7-99 I S1651 Failure to follow these warnings and the assembly instructions could result in serious injury or death. THIS PRODUCT REQUIRES ADUL T ASSEMBL Y . FOLLOW ASSEMBL Y INSTRUCTIONS CAREFULL Y . If you experience any difficulties, please contact the Customer Service Department. DO NOT USE SWING without the seat cover . ...
-
Graco 1602 - page 3
5 132-7-99 IS1651 6 8 7 OVER A A Step 2. Slide hanger tubes into armrests of seat as shown. Step 3. Insert two pin screws through seat armrests into the holes in the hanger tubes and tighten securely . Step 4. Insert the hanger tubes into the hanger bracket s as shown. Metal buttons should pop out and lock upon full insertion. CHECK that the hanger ...
-
Graco 1602 - page 4
5 132-7-99 IS1651 6 8 7 OVER A A Step 2. Slide hanger tubes into armrests of seat as shown. Step 3. Insert two pin screws through seat armrests into the holes in the hanger tubes and tighten securely . Step 4. Insert the hanger tubes into the hanger bracket s as shown. Metal buttons should pop out and lock upon full insertion. CHECK that the hanger ...
-
Graco 1602 - page 5
9 132-7-99 IS1652 10 1 1 12 Step 1. With baby out of swing, open the battery comp artment by gently pressing on the lid at the ridged area and lifting the lid. Step 2. Insert four D cells. CHECK that the batteries are put in correctly . (Swing will not run if batteries are put in backwards.) Step 3. Snap the lid closed. Inst alling Batteries ...
-
Graco 1602 - page 6
9 132-7-99 IS1652 10 1 1 12 Step 1. With baby out of swing, open the battery comp artment by gently pressing on the lid at the ridged area and lifting the lid. Step 2. Insert four D cells. CHECK that the batteries are put in correctly . (Swing will not run if batteries are put in backwards.) Step 3. Snap the lid closed. Inst alling Batteries ...
-
Graco 1602 - page 7
13 132-7-99 IS1652 Replacement Part s Instructions for ordering swing p arts: Complete form below . Y our swing model number MUST be included on the form to ensure proper replacement parts . Y our model number can be found on a sticker beneath the swing motor . Payment must accompany your order . IF YOU NEED HELP If you have any questions or if you ...
