-
Zanussi ZCE ID - page 1
ELECTRIC DOUBLE OVEN AND GRILL ZCE ID ...
-
Zanussi ZCE ID - page 2
MODEL NO. ZCE ID Voltage: 230/240 Volts AC 50 Hz Wattage: 10.5/11.4 kW Height: 900 mm Width: 600 mm Depth: 598 mm This appliance complies with: European Council Directive 73/23/EEC. EMC Directive 89/336/EEC. CE Marking Directive 93/68/EEC . 2 TECHNICAL DETAILS ...
-
Zanussi ZCE ID - page 3
Technical Details ..................................... ............................................. 2 Contents ..................................... ................................................ ..... 3 Preface ..................................... ................................................ ....... 5 Safety .............................. ...
-
Zanussi ZCE ID - page 4
Defrosting ..................................... ................................................ .. 24 Uses of Defrost Feature ..................................... .............................. 2 4 S e l e c t i n g D e f r o s t ............. ........................ .................................... 2 4 Things to Note ...................... ...
-
Zanussi ZCE ID - page 5
Dear Customer, Thank you for buying a Zanussi cooker. With our experience in developing and manufacturing the very best in U.K. cookers, you can be assured that you have purchased a hard working, reliable, quality product. Zanussi cookers comply with British Standard safety and performance requirements. They have been approved by BEAB (British Elec ...
-
Zanussi ZCE ID - page 6
THESE WARNINGS ARE PROVIDED IN THE INTERESTS OF YOUR SAFETY. ENSURE THAT YOU UNDERSTAND THEM ALL BEFORE INSTALLING OR USING THE COOKER. PLEASE READ CAREFULLY BEFORE INSTALLATION This cooker is heavy and care must be taken when moving it. Ensure that all packaging, both inside and outside the cooker has been removed before the appliance is used. Do ...
-
Zanussi ZCE ID - page 7
Ensure that you support the grill pan when it is in the withdrawn or partially withdrawn position. Ensure that all vents are left unobstructed to ensure ventilation of the oven. Ensure that the anti-tilt shelves are put in place correctly. Refer to instructions on pages 18 and 20. Never line any part of the cooker with aluminium foil. Always stand ...
-
Zanussi ZCE ID - page 8
RATING PLATE Record the model, product and serial numbers on the back cover from the rating plate. This is situated on the lower front frame of the cooker and can be seen upon opening the fan oven door. The cooker must be protected by a suitably rated fuse or circuit breaker. The rating of the cooker is given on the rating plate. Do not remove the ...
-
Zanussi ZCE ID - page 9
Note: Vapours from the oven vents may in time cause discoloration of wallcoverings behind the cooker. For ease of cleaning it may be preferable to tile behind the cooker. Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob. It is important to ensure that the cooker is level after installation. Levelling feet are fitted ...
-
Zanussi ZCE ID - page 10
GRILL AND OVEN FURNITURE The following items of grill and oven furniture have been supplied with the cooker. If you require replacements of any of the items listed below please contact your local Service Force Centre, quoting the relevant part number. 1 grill pan (311409401) 1 grill pan handle Note If you require an additional handle for your grill ...
-
Zanussi ZCE ID - page 11
THE CONTROL PANEL FEATURES A - Automatic Timer B - Fan Oven Temperature Control C - Top Oven Temperature Control D - Fan Oven Indicator Neon E - Dual Grill Control F - Top Oven Indicator Neon G - Hotplate Controls 11 D F A B C E G GETTING TO KNOW YOUR COOKER ...
-
Zanussi ZCE ID - page 12
Please note that this is a 24 hour clock, for example 2.00 pm is shown as 1400. In the following pages we explain how to set the controls. Read through them a few times until you are familiar with the procedure. We have supplied a plastic card as a quick reference when setting the timer. If the oven is switched off on the wall, or there is a loss o ...
-
Zanussi ZCE ID - page 13
AUTOMATIC CONTROL You can use the automatic control for both ovens. When you use the automatic controls for the first time it's probably best to choose a time when you are at home. That way you can check to make sure you've set everything correctly and you'll feel much more confident when you are away from home in the future. SETTING ...
-
Zanussi ZCE ID - page 14
To operate the dual hotplate turn the control knob clockwise for the full area, or anticlockwise for the centre section. The inner section is very economical when cooking with small diameter saucepans. For single hotplates, turn the control knob in either direction to vary the heat setting. The highest number represents the hottest setting and the ...
-
Zanussi ZCE ID - page 15
To prolong the life of hotplates:- Never use utensils with a skirt, e.g. a bucket. Never use an asbestos mat. Never leave the hotplates ON when not covered with a saucepan. Ensure that hob and saucepans are clean and dry before the start of cooking to reduce cleaning. Follow the cleaning instructions very closely to keep the hob looking like new. I ...
-
Zanussi ZCE ID - page 16
To operate the grill turn the grill control clockwise for full area grilling and anti-clockwise for centre section grilling only. The highest number represents the hottest setting and the lowest the coolest setting. THINGS TO NOTE The cooling fan will operate in conjunction with the grill. For more details on theoperation of the cooling fan see pag ...
-
Zanussi ZCE ID - page 17
To check the progress of the food being grilled, the grill pan should be withdrawn on the shelf to attend to food during cooking or the carrier shelf can be lifted away from the cooker and rested on a heat resistant work surface. HINTS AND TIPS Food should be thoroughly dried before grilling to minimise splashing. Brush lean meats and fish lightly ...
-
Zanussi ZCE ID - page 18
Turn the top oven temperature control to the required setting. The cooling fan will operate immediately with the top oven. For more details on cooling fan operation see page 9. THINGS TO NOTE 1. The grill cannot be operated when the top oven is in use. If the grill and top oven controls are selected at the same time, only the top oven will operate. ...
-
Zanussi ZCE ID - page 19
HINTS AND TIPS Most cooking should be carried out using an oven shelf positioned in one of the shelf runners. Larger roasts and casseroles should normally be cooked in the main oven. However, they may be cooked on a flat shelf placed on the base of the top oven provided there is sufficient room for air circulation around the food. DO NOT place dish ...
-
Zanussi ZCE ID - page 20
Turn the main oven temperature control to the required setting. THINGS TO NOTE 1. The main oven indicator neon will glow until the oven has reached the desired temperature and then go out. It will turn ON and OFF periodically during cooking showing that the temperature is being maintained. 2. The interior oven light will come ON when the main oven ...
-
Zanussi ZCE ID - page 21
HINTS AND TIPS Arrange the shelves in the required positions before switching the oven ON. Shelves are numbered from the bottom upwards. When cooking more than one dish in the fan oven, place dishes centrally on different shelves rather than cluster several dishes on one shelf, this will allow the heat to circulate freely for the best cooking resul ...
-
Zanussi ZCE ID - page 22
The oven temperatures are intended as a guide only. It may be necessary to increase or decrease the temperature by 10° C to suit individual preferences and requirements. FAN OVEN TOP OVEN FOOD SHELF POSITION COOKING TEMP °C SHELF POSITION COOKING TEMP °C APPROX COOK TIME (m) Biscuits Bread Bread rolls/buns Cakes: Small & Queen Sponges Victor ...
-
Zanussi ZCE ID - page 23
ROASTING CHART INTERNAL TEMPERATURES - Rare : 50-60°C; Medium : 60-70°C; Well :70-80°C MEAT SECOND/FAN OVEN COOKING TIME Beef 160-180°C 20-35 min per ½kg/1lb and 20-35 min over Beef, boned 160-180°C 20-35 min per ½kg/1lb and 25-35 min over Mutton and Lamb 160-180°C 25-35 min per ½kg/1lb and 25-35 min over Pork and Veal 160-180°C 30-40 min ...
-
Zanussi ZCE ID - page 24
USES OF DEFROST FEATURE This main oven function defrosts most foods faster than more conventional methods. It is particularly suitable for delicate frozen foods which are to be served cold e.g. cream filled gateaux, cakes covered with icings or frostings, cheesecakes, biscuits, scones etc. It is preferable to thaw fish, meat and poultry slowly in t ...
-
Zanussi ZCE ID - page 25
BEFORE CLEANING THE COOKER, ALWAYS ALLOW THE COOLING FAN TO COOL THE COOKER DOWN BEFORE SWITCHING OFF THE ELECTRICITY SUPPLY. CLEANING MATERIALS Before using any cleaning materials on your cooker, check that they are suitable and that their use is recommended by the manufacturer. Cleaners that contain bleach should NOT be used as they may dull the ...
-
Zanussi ZCE ID - page 26
HINTS AND TIPS TO REDUCE HOB SOILAGE: Make sure the bottom of the saucepan and the cooking area are clean and dry before cooking begins. Ensure saucepans are large enough to accommodate food to avoid boil overs. If possible, wipe up spills and splatters as they occur, but take care to avoid steam burns. Avoid using a dishcloth or sponge to clean th ...
-
Zanussi ZCE ID - page 27
The vitreous enamel on the grill and main oven base can be cleaned using normal oven cleaners or aerosol oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards. Aerosol cleaners must not be used on Stayclean surfaces and must not come into contact with the elements or the door ...
-
Zanussi ZCE ID - page 28
5. Clean the outer and inner glass using hot soapy water or Hob Brite cleaner may be used. DO NOT try to clean the aluminium foil which is inside the door. The foil is there to help keep the door cool, if it is damaged it will not work. Ensure that all parts are well rinsed and thoroughly dry before attempting to replace the outer door. Please note ...
-
Zanussi ZCE ID - page 29
LOCATION OF SPLASHBACK / STORAGE BOARD Splashback and Storage Board Kits are available to purchase from your retailer. Fix the Splashback drilling 2 holes of 6 mm in diameter in the position shown. See Fig. 1a. Use screws and wall plugs provided in the pack. To enable the Splashback Board to be fitted, a 2 mm gap between the screw head and wall is ...
-
Zanussi ZCE ID - page 30
We strongly recommend that you carry out the following checks on your cooker before calling a Service Engineer. It may be that the problem is a simple one which you can solve yourself without the expense of a service call. If our Service Engineer finds that the problem is listed below or the fault is due to incorrect use or installation you will be ...
-
Zanussi ZCE ID - page 31
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning: 0870 5 929929 Your call will be routed to the Service Force Centre covering your post code area. For Service in the Republic of Ireland contact Zanussi Long Mile Road Dublin 12 Telephone: 01 ...
-
Zanussi ZCE ID - page 32
Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The ap ...
-
Zanussi ZCE ID - page 33
...
-
Zanussi ZCE ID - page 34
ZCE ID 311513800 ...
-
Zanussi ZCE ID - page 35
...
-
Zanussi ZCE ID - page 36
RATING PLATE REFERENCE MAKE AND MODEL NO. SERIAL NO. DATE OF PURCHASE PRODUCT NO. IMPORTANT NOTICE In line with our continuing policy of research and development, we reserve the right to alter models and specifications without prior notice. This handbook is accurate at the date of printing, but will be superseded and should be disregarded if specif ...
Hai una domanda su Zanussi ZCE ID?
Utilizza il modulo sottostante
Se non hai risolto il problema con Zanussi ZCE ID con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Zanussi ZCE ID è probabile che voglia condividere il modo di risolverlo.