-
Zanussi ZDF2020 - page 1
EN User manual 2 Dishwasher ZDF2020 ...
-
Zanussi ZDF2020 - page 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Use of rinse aid _ _ _ ...
-
Zanussi ZDF2020 - page 3
• Do not change the specifications or modify this prod- uct. Risk of injury and dam age to the applia nce. • Do not use the appliance: – if the main s cable or water hoses are damag ed, – if the control pane l, workto p or plinth area are dam- aged, that you can get acces s to the inn er side of the applia nce. Contact yo ur local Se rvice ...
-
Zanussi ZDF2020 - page 4
Delay start button Use the delay start button to de lay the start of the washing programme with an interv al of 3 hours. Refer to the chapter 'Setting and starting a w ashing programme'. Programme knob and on/off indicator light • To set a wa shing programme, turn the programme knob clockwise or anticloc kwise. The programme marker on t ...
-
Zanussi ZDF2020 - page 5
Programm e Programme duration (in minutes) Energy consumption (in kWh) Water consumption (in litres) 130-140 1,0-1,2 14-16 12 0,1 5 The pressure and temperat ure of t he water, t he var- iations of power supply and t he quantity of dishes can change th ese values. Use of the appliance Refer to the follow ing instru ctions f or each step of pro- ced ...
-
Zanussi ZDF2020 - page 6
Water hardnes s Water hardnes s setting °dH °TH mmol/l Clarke manually electronica lly 51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10 43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9 37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8 29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7 23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6 19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5 15 - 18 26 - 32 2,6 - 3,2 18 - ...
-
Zanussi ZDF2020 - page 7
1 2 3 Fill the salt container with 1 litre of water (only the first operation). 4 5 6 It is normal that water overflows from the salt con- tainer when you fill it with salt. Make sure that there is no grain of salt outer of the salt compartment. Salt whic h s tays on the tank for a while drills the tank. It is recomm ended to start a wash - ing pro ...
-
Zanussi ZDF2020 - page 8
Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are applicable fo r dishwasher s. Do not use the appli ance to clean o bjects th at can abs orb water (sponges, househ old cloths, etc.). • Before you l oad cutler y and dishes, d o these steps: – Remove all food remainings a nd debris. ...
-
Zanussi ZDF2020 - page 9
Warning! Adjust the height before you load the upper basket. Maximum heigh t of the dishes in : upper bask et l ower basket Upper posit ion 20 cm 31 cm Lower posit ion 24 cm 27 cm 1 2 Do these steps to move the upper basket to the uppe r or lower position: 1. Move the front r unne r stops (A) ou t. 2. Pull the basket out. 3. Put the basket in the u ...
-
Zanussi ZDF2020 - page 10
Use of detergent tablets Put the detergent ta blet in the detergent dispenser (A). Detergent tablets contain: • detergent • rinse ai d • other clea ning agents. Do these step s to use dete rgent tablet s: 1. Make sure tha t the deter gent tablet s are applica ble for your water hardne ss. Refer to the instructions from the manufacturer. 2. Se ...
-
Zanussi ZDF2020 - page 11
Cancelling a delay start: 1. Press and hold the start/cancel button until, the start/ cancel indicator light and de lay start indica tor light go off. 2. Press the st art/cancel b u tton to start the washing programme. End of the washing programme Switch off the appliance in these conditions: • The applia nce stops automatic ally. • The end ind ...
-
Zanussi ZDF2020 - page 12
What to do if… The applian ce does not st art or stops du ring operati on. If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact t he Service Force C entre. Caution! Switch off the applia nce before you do the below suggested correctiv e actions. Fault code and ma ...
-
Zanussi ZDF2020 - page 13
The cleaning results are not satisfactory The dishes ar e not clean • The selected washing p rogramme is not applicable for the type of load and soil. • The baskets are loaded in correctly so that water c annot reach all surfaces. • Spray arms do not turn freely bec aus e of incorrect arrang em ent of the lo ad. • The filters are dirty or n ...
-
Zanussi ZDF2020 - page 14
Warning! To discard the applia nce, follow the procedure: • Pull the mains plug out of the socket. • Cut off t he mains cable and mains plug and di scard them. • Discard th e door catch. This preven ts the child ren to close thems elves inside the applian ce and endang er their li ves. Installation Warning! Make sure tha t mains plug is disco ...
-
Zanussi ZDF2020 - page 15
3 4 The internal diameter must no t be smaller than the diam- eter of th e hose. If you con nect the wat er drain hos e to a trap sp igot under the sink, remove the plas tic membrane (A). If you do not remove the membran e, remaining food can cause a block- age in th e drain hose spi got. Caution! Make sure that the wa ter couplings are tight t o p ...
-
Zanussi ZDF2020 - page 16
To buy accessories, consumables and spare parts at our onl ine shop please visit: www.zanussi.co.uk www.zanuss i.com 156985811-00-082 009 ...
Hai una domanda su Zanussi ZDF2020?
Utilizza il modulo sottostante
Se non hai risolto il problema con Zanussi ZDF2020 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Zanussi ZDF2020 è probabile che voglia condividere il modo di risolverlo.