-
Tatung TLM-1705 - page 1
OPERATING INSTRUCTIONS TLM-1705 / TLM1905 ...
-
Tatung TLM-1705 - page 2
...
-
Tatung TLM-1705 - page 3
i P REFACE FCC Compliance Statement This device complies with part 15 of the FCC Rules. Opeartion is sub jected to the following two co nditions: 1. This device may not cause harmful int erference, and 2. This device must accept any interfe rence received, including interference that may cause undesi red operation. FCC WARNING This equipment has be ...
-
Tatung TLM-1705 - page 4
ii The Federal Comm unications Com mission warns that changes or modificati ons of the unit not expressly approved by the party responsible for com pliance could void the user’s authority t o operate the equipment . CE mark for Class B ITE (Follow ing European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+ ...
-
Tatung TLM-1705 - page 5
iii Important Operating Instructions Please read the following instructi ons carefully. This m anual should be retained for future use. 1. To clean the LCD monitor screen, first, make sure the monitor is in the power off mode. Unplug the m onitor from its power source before cleaning it. Do not spray li quid cleaners directly onto the unit. Without ...
-
Tatung TLM-1705 - page 6
iv Introduction CONTENTS PREFACE ..................................................................................................................... I CHAPTER 1 ................................................................................................................. 1 Unpacking 1 Identifying Components 2 The LCD Multimedia Monitor — Fro ...
-
Tatung TLM-1705 - page 7
1 C HAPTER 1 The LCD Multimedia Monitor Unpacking After you unpack you r LCD multimedia monitor, m ake sure the following items are included in the box and in good condition: Standard Item • LCD multimedia monitor • Monitor -to-PC analog signal cable (15-pin) • Monitor -to-PC digita l signal cable (24-pin) – (Opt ional) • Power cord • A ...
-
Tatung TLM-1705 - page 8
2 Identifying Components The LCD Multimedia Monitor — Front View Figure 1-1: The LCD multimedia Monitor Front View 1. Power-On Indicator This LED indicator stays lit when th e power is on and b links when the LCD multimedia monitor is in power saving mode . 2. Monitor Stand 3. LCD Screen 4. LCD Multimedia Monitor Control Panel Refer to Chapter 2 ...
-
Tatung TLM-1705 - page 9
3 1. Audio Line-in 2. AC Power Jack 3. VGA (Analog) Cable With 15-Pin D-Sub VGA Connector (Male) 4. S-Video connector 5. AV connector 6. Digital VGA (DVI) Cable Connector (Optional) Adjusting the Tilting Angle The LCD multimedia monitor’s angle settings range from -3 ° to 20 ° . See Figure 1-3 . Figure 1-3: Tilting the Monitor ...
-
Tatung TLM-1705 - page 10
4 Raising Your Monitor to an Upright Position and Adjusting Monitor Angle ...
-
Tatung TLM-1705 - page 11
5 Power Management System The LCD multimedia monitor complies with the VESA DPMS power management proposal. When the LCD multimedia monitor is in power saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator starts blinking. ...
-
Tatung TLM-1705 - page 12
6 C HAPTER 2 The Display Controls LCD Multimedia Monitor Control Panel Figure 2-1: The LCD Monitor Panel 1. OSD Menu Button Press this button to pop up the OSD (On-Screen Di splay) me nu. This button is also a Funct ion Select button . 2. Adjustment Control Buttons These two buttons allow you t o adjust the selected control functions in the OSD. 3. ...
-
Tatung TLM-1705 - page 13
7 Adjusting the Monitor’s Display OSD Main Menu To access the OSD main m enu, press the OSD Menu button. Use the Function Select buttons to scroll b etween the OSD main menu options. The optio n that is currently selected is blinking. Pressing one of adjustment control buttons causes the followi ng screen to appear: Figure 2-2: The OSD Main Menu ...
-
Tatung TLM-1705 - page 14
8 H-POSITION: To move the LCD m onitor’s display left or right on a horizontal plane. V-POSITION: To move the LCD m onitor’s displa y up or down on a vertical plane. PHASE: To adjust the focus and clarity of the display. CLOCK: To adjust the d isplay pixel alignment. RESET: To reset all of the Mon itor-Control submenu setting s to the factory d ...
-
Tatung TLM-1705 - page 15
9 EXIT: To exit the OSD-Control submenu. GRAPHIC-CONTROL Option The Graphic-Control option l ets you ma ke adjustments that effect the contrast, brightness and color of the LCD m onitor’s display. Press the Adjustment control button to displ ay the submenu. CONTRAST: To adjust the con trast level of the display screen. BRIGHTNESS: To adjust the l ...
-
Tatung TLM-1705 - page 16
10 Press the Adjustment control button to displ ay the submenu. LANGUAGE: The supported languages include Germ an, English, French, Spanish, Itali an and Japanese. AUDIO VOLUME: To increase or decrease the volume of the LCD monitor’s sound sy stem. INFORMATION: To indicate display mode tim ings and firmware version. EXIT: To exit the Misc-Control ...
-
Tatung TLM-1705 - page 17
11 OSD-CONTROL Option The OSD-Control m enu option lets y ou adjust the position of the OSD on the screen. Press the Adjustment control button to displ ay the submenu. Use the Function Select buttons to select one of t he following submenu options: OSD-H-POSITION: To change the position of the OSD on a horizontal plane. OSD-V-POSITION: To change th ...
-
Tatung TLM-1705 - page 18
12 MISC-CONTROL Option The Misc-Control m enu option let s you select the OSD display language, adjust the audio volume set ting and view system informati on. Press the Adjustment control button to displ ay the submenu. LANGUAGE: The supported languages include Germ an, English, French, Spanish, Itali an and Japanese. AUDIO VOLUME: To increase or d ...
-
Tatung TLM-1705 - page 19
13 EXIT: To exits the Monitor-Control subm enu. OSD-CONTROL Option The OSD-Control m enu option lets y ou adjust the position of the OSD on the screen. Press the Adjustment control button to displ ay the submenu. Use the Function Select buttons to select one of t he following submenu options: OSD-H-POSITION: To change the position of the OSD on a h ...
-
Tatung TLM-1705 - page 20
14 SATURATION: To adjust the color level you prefer. SHARPNESS: Press the adjustment button to optimize the sharpness for your specific applicati on. RESET: To reset all of the Video-Control submanu settings t o the factory default. EXIT: To exit the Video-Control subm enu. MISC-CONTROL Option The Misc-Control m enu option let s you select the OSD ...
-
Tatung TLM-1705 - page 21
15 Note: 1. No Video When the monitor is ON and th ere is no Video signal received, the following message will be displayed. 2. Signal out of monitor’s support ed range (Please refer to Addendum) When the frequency range of the signal is out of the m onitor’s specifications, the display will show the follo wing message on two cases: Case 1: The ...
-
Tatung TLM-1705 - page 22
16 Hot-Key Buttons for Quick Adjustment of Monitor Settings. ( 〝 AUTO-ADJUST 〞 hot-key is effective only when analog input signal is selected for application) 1. " Auto-adjust " hot-key button: Press button 2 to apply the m onitor setti ng automatically. A sm all “AUTO-ADJUST” OSD is also displayed. 2. " Adjust-volume " ...
-
Tatung TLM-1705 - page 23
17 A PPENDIX A Troubleshooting Troubleshooting Procedures This LCD monitor come s pre-adjusted w ith standard VGA timing. Due to output timing differences among various VGA car ds, you may initially experience an unstable or unclear display when a new display m ode or new VGA card is selected. Before applying any of the following troubleshoot ing p ...
-
Tatung TLM-1705 - page 24
18 2. Turn off the LCD monitor and then turn it back on again. Press the OSD Menu button (refer to Chapt er 2) once and then press either Adjustment Control button several times. If there is still no display, press the other Adjust ment Cont rol button several times. 3. If step 2 doesn’t work, connect your PC sy stem to another external CRT. If y ...
-
Tatung TLM-1705 - page 25
19 A PPENDIX B Technical Information LCD Monitor Specifications LCD Panel 17-inchTFT Control Functions Power Software switch w ith LED indicator (toggle ON/OFF) Main Menu Submenu ANALOG MODE : MONITOR-CONTROL AUTO-ADJUST, H-POSITION, V- POSITION, PHASE, CLOCK, RESET, GRAPHIC / TEXT, PORT-SELECT, EXIT OSD-CONTROL OSD-H-POS ITION, OSD -V-POSIT ION, O ...
-
Tatung TLM-1705 - page 26
20 Display Area 337.920 mm x 270.336 mm (17.0-inch diagonal) Display Colors 16M Video Input VGA, DVI (O ptional), S-Video, AV Scanning Frequency (Analog mode) 24-80K 56-75 Scanning Frequency H/V, Hz (Digital mode)- (Optional) 31-80K 56-75 Power Management Meets VESA DPMS Power Consumption ON : 40W max. OFF/Power Saving Mode: Less than 5W (Measured ...
-
Tatung TLM-1705 - page 27
21 A PPENDIX C Supported Timing Ite m Standards Resolution Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) Sync Polarity or composite sy nc (H/V) Operatin g Mode 1 NEC PC98 640x400 25.20 70.15 31.50 -/- A/D 2 NEC PC98 640x400 21.05 56.42 24.83 -/- A 3 MAC 13” mode 640x480 30.24 66.67 35.00 -/- A/G 4 MAC 16” ...
-
Tatung TLM-1705 - page 28
6200564280 TATUNG COMPANY OF AMERICA 2850 El Pres i d i o ST. Long Beach, CA 90810 (800) 827-2850 www.tatungusa.com ...
Hai una domanda su Tatung TLM-1705?
Utilizza il modulo sottostante
Se non hai risolto il problema con Tatung TLM-1705 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Tatung TLM-1705 è probabile che voglia condividere il modo di risolverlo.