Italiano dropdown-ico

Manuale per l’uso Jotul GF 100 DV II, GF 200 DV II

32 pagine 1.44 mb
Scarica

Vai alla pagina of 32

Summary
  • Jotul GF 100 DV II, GF 200 DV II - page 1

    1 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Installation and Oper a tion Instruc tions Jøtul GF 100 D V I I Nordic Q T Jøtul GF 200 D V I I Lillehammer IF THE INFORMA TION IN THESE INSTRUCTIONS ARE NOT FOLL OWED EXACTL Y , A FIRE OR EXPLO- SION MA Y RESUL T CA USING PR OPERTY D AMAGE, PERSONAL INJUR Y OR LOSS OF LIFE. FOR Y OUR SAFETY : D ...

  • Jotul GF 100 DV II, GF 200 DV II - page 2

    2 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer W elc ome to J ø tul... Congr atulations on the purchase of your new Jøtul gas heater . W e at Jøtul are glad you’ve made the decision to warm your hearth with a Jøtul product. Y our new stove e xemplifies o ver 150 years experience as the world’ s largest manufacturer of solid fuel burnin ...

  • Jotul GF 100 DV II, GF 200 DV II - page 3

    3 GF 100 D V II Nordic QT GF 200 D V II Lillehammer T able of C ontents Specifications , GF 100 DV II .................. 4 Specifications , GF 200 DV II .................. 5 General Inf ormation ............................... 6 Service T ools .............................................. 6 Safety Inf ormation .................................. 7 ...

  • Jotul GF 100 DV II, GF 200 DV II - page 4

    4 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Jøtul GF 100 DV II Nordic QT Specifications Input Rates Natural Gas 17,000 BTU /hr . maximum input 9,900 BT U/hr . minimum input Propane 16,000 BTU /hr . maximum input 8,700 BT U/hr . minimum input Inlet Pressure : MI N M AX Natur al Gas: 5.0 WC (1.24 kP a) 7.0 WC (1.74 kP a) Propane: 12.0 WC (2. ...

  • Jotul GF 100 DV II, GF 200 DV II - page 5

    5 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Jøtul GF 200 D V I I Lillehammer Specifications GF 200 DV II Accessories • Fuel Conversion Kit - NG ..................................................... 155627 • High Altitude Adjustment Kit - NG ................................ 155808 • High Altitude Adjustment Kit - LP .................. ...

  • Jotul GF 100 DV II, GF 200 DV II - page 6

    6 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Gener al Information  THIS H EA TER MUST BE INST ALLED AN D MAINT AIN ED BY A QU ALIFI ED SERVICE AGENCY .  The installation and repair of this appliance must be done by a qualified service person. Failur e to properly install and maintain this heater could result in an unsafe or haz a r dou ...

  • Jotul GF 100 DV II, GF 200 DV II - page 7

    7 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Location In selecting a location for the stov e, consider the following poin ts: 1) Heat distribution 2) V ent termination requiremen ts 3) Gas supply line routing 4) T raffic are as, furniture, draperies, etc . The stove ma y be located on or near con ven- tional construction materials, however , ...

  • Jotul GF 100 DV II, GF 200 DV II - page 8

    8 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Sto v e and V ent Clearance Requirements Minimum Clearances from the Stov e to Combustibles: Measured from the stove top pla te. See figs. 2-4. For Both Sto ves Rear: 0” (0 mm) Ceiling: 42” (1066 mm) C orner : 2” (50 mm) Sides: 3” (76 mm) Minimum Clearances between V ent Pipe and C ombusti ...

  • Jotul GF 100 DV II, GF 200 DV II - page 9

    9 GF 100 D V II Nordic QT GF 200 D V II Lillehammer SEALANT V enting Requirements Both stoves ma y be installed with a vertical or horizontal termination and must conform to the configur ation requir ements described in this section. V ent components from the manufacturers listed below ar e approved f or use: • Simpson Dura- V ent GS • Selkirk ...

  • Jotul GF 100 DV II, GF 200 DV II - page 10

    10 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer V er tical V ent T ermina tion The Jøtul GF 100 D V I I and Jøtul GF 200 D V I I are ap- pro ved for ve rtical venting thr ough a ceiling or to a roof termination following these guidelines:  The termination should fall within the shaded ar ea of the grid depicted in fig .7 below . Maximum V ...

  • Jotul GF 100 DV II, GF 200 DV II - page 11

    11 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Co-linear V ent Installation This appliance may be v ented through a masonry or Class A pref abricated chimney using a Co-linear Flexible V ent system approved f or use with a solid-fuel burning fireplace. When installed in the manner described below , this system can improv e the performance of ...

  • Jotul GF 100 DV II, GF 200 DV II - page 12

    12 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Figur e 12. Corner Installation, Horizontal T ermination directly of f rear . Maximum Horizontal run is 2 ft. (610 mm). Horizontal V ent T ermination  W all Cut-out Opening: A minimum 10" X 10" (250 mm x 250 mm) square hole is requir ed for proper pipe clearances through a combustibl ...

  • Jotul GF 100 DV II, GF 200 DV II - page 13

    13 GF 100 D V II Nordic QT GF 200 D V II Lillehammer W all Shield Installation The decora tive W all Shield, included in the Miscellaneous Hardw are bag , is used to obscure the vent hole in the wall in installations v ented directly of f the rear of the stov e. F ollow this procedur e: 1. R emove the top two 1/4” he x head screw s from the rear ...

  • Jotul GF 100 DV II, GF 200 DV II - page 14

    14 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Figure 17 . V ent T erminal Clearances - National F uel Gas Code. Horizontal T ermination Clearance A = Clearance abov e grade, ver anda, por ch , deck, or balcony : 12 inches (30 cm) minimum. B = Clearance to window or door that may be opened: **Min. 9 inches, U .S. / *12 inches (30 cm) CAN. W e ...

  • Jotul GF 100 DV II, GF 200 DV II - page 15

    15 GF 100 D V II Nordic QT GF 200 D V II Lillehammer T ools required: • 1/2” open ended wrench or deep-well socket, T orx T20 or slotted screwdriv er , 4 mm allen wrench. C onversion Kit Contents: • 1, regula tor tower labeled for propane • 3, regula tor tower screw s • 1, burner orifice (GF 100: #48 for NG, #56 for LP) (GF 200: #46 for N ...

  • Jotul GF 100 DV II, GF 200 DV II - page 16

    16 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Gas Conv ersion Procedure 1. T urn off gas supply to stove. 2. R emove the stov e T op Plate (3). 3. GF 100 DV II Only : Remo ve the front pla te from the stove. P ull the casting str aight up and out awa y from the side panels. Pull the panel upwar d with one hand while the other pushes against ...

  • Jotul GF 100 DV II, GF 200 DV II - page 17

    17 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Gas Supply C onnection NO TE: If the optional Blower will be installed, use a 90° Elbow off the v alve to cr eate adequate clearance f or the main gas line. The gas supply line connection is made to the valv e just inside the left rear leg. The gas supply line should be 3/8" npt with a 1/2& ...

  • Jotul GF 100 DV II, GF 200 DV II - page 18

    18 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Gas Pressure Corr ec t gas pressure is essential f or ef ficient and safe opera tion. It is important that the correct pressure is established at the time of the installation. Pr oper gas pressure pr ovides a consistent flow of gas to the appli- ance and is instrumental in checking f or gas leaks ...

  • Jotul GF 100 DV II, GF 200 DV II - page 19

    19 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Flame Appear ance - Air Shutter Adjustment W ARN I NG: AI R SHUTTER AD JUST MENTS SHOULD ONL Y BE PERFORMED BY A QU ALIFI ED PROFESSIONAL SER VICE TECHNIC IAN. The air shutter setting at the burner orifice can be adjusted to achieve the desired flame appearance. The shutter is set in the mid-rang ...

  • Jotul GF 100 DV II, GF 200 DV II - page 20

    20 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Optional W all Thermosta t or Remote C ontrol Use only a 750 millivolt DC two-wire circuit thermostat with this appliance. The thermostat should be placed in the same room as the heater , typically 5 feet off the floor . Avoid dr afty areas or an y area that may aff e ct the accuracy of the therm ...

  • Jotul GF 100 DV II, GF 200 DV II - page 21

    21 GF 100 D V II Nordic QT GF 200 D V II Lillehammer S ystem Check 1. PURGI NG T H E GAS LI NE: When lighting the appli- ance f or the first time, it will take a few moments to clear the gas line of air . Once this purge is complete, the appliance will opera te as described in the lighting instructions. See the inside back cov er of this manual or ...

  • Jotul GF 100 DV II, GF 200 DV II - page 22

    22 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Maintenance This appliance and its venting system should be in- spected before use and at least annually by a qualified service technician. IMPOR T ANT : AL WA YS TURN OFF THE GAS SUPPL Y TO THE ST OVE BEFORE ANY SER VIC E W ORK IS PERFORMED ON T H E S TO VE. V ent Sy stem: The vent components sh ...

  • Jotul GF 100 DV II, GF 200 DV II - page 23

    23 GF 100 D V II Nordic QT GF 200 D V II Lillehammer MODEL NAME: ________________________ SERI AL N UMB ER: ______________________ DA TE OF PURC HASE: ___________________ PURC HASED FR OM: ____________________ NAME OF I N S T ALLER: ___________________ TYPE OF FU EL: ________________________ W AS ST OVE C ONVERTED? _______________ NO TES: R ecord t ...

  • Jotul GF 100 DV II, GF 200 DV II - page 24

    24 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer MANUAL AUTO OFF BLOWER Optional Blower # 155631 Installation 1. Unpack and check the con- tents of the blower kit. Con- tact your dealer if any damage is eviden t or par ts are missing. See fig. 35. 2. Attach the C ontrol Box to the Snapstat Brack et using two #8 x 1/2” sheet metal screws. As s ...

  • Jotul GF 100 DV II, GF 200 DV II - page 25

    25 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Blow er Oper ation The v ariable-speed blower will enhance heat circulation around the firebo x and out into the room. The blower is con trolled by a heat activated switch (snapstat) that will ONL Y function when the control switch is in A UT O setting. After the fir e has been burning for a time ...

  • Jotul GF 100 DV II, GF 200 DV II - page 26

    26 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer GF 100 D V I I / GF 200 DV I I Illustr ated P ar ts Break down / Firebo x Assembly Figure 39. A 1 2 3 4 4 4 4 4 4 5 6 7 8 10 11 12 13 33 24 28 27 25 26 24 29 30 31 20 21 22 17 16 15 14 23 19 22 22 18 63 47a 48 49 50 51 52 53 4 54 55 56 57 39 60 61 40 59 41 42 43 44 45 46 10 34 35 36 37 38 62 58 6 ...

  • Jotul GF 100 DV II, GF 200 DV II - page 27

    27 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Part Description Part Number 1. R ear Shroud, Matte Black .............. 22055592 R ear Shroud, Jøtul Iron ................... 22055585 2. Burner Co ntrol Switch ........................ 129123 3. Switch Bo x, Matte Black ................ 22092592 Switch Bo x, Jøtul Iron ..................... 2 ...

  • Jotul GF 100 DV II, GF 200 DV II - page 28

    28 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer GF 200 DV II Lillehammer Illustra ted Parts Breakdown / Cast Iron and Associa ted Hardw are GF 100 DV II Nordic QT 2 7 8 6 5 9 4 3 1 12 11 10 10 10 2 10 Figure 41. Figure 40 . 1 3 4 2 2 4 ...

  • Jotul GF 100 DV II, GF 200 DV II - page 29

    29 GF 100 D V II Nordic QT GF 200 D V II Lillehammer Cast Iron P ar ts List GF 200 D V I I Lillehammer 4. Screw , M6 x 12 T russ Head Phillips, ( 4) ........ 118045 Cast Iron Parts Matte Black Blue Black Ivory For est Green Jøtul Iron Jøtul Iron Enamel 1. T op Casting 10391092 10391027 10391029 10391032 10391085 10391046 2. Side Panel 10426992 10 ...

  • Jotul GF 100 DV II, GF 200 DV II - page 30

    30 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Optional Antique Brick P anel Kit 155815 Installation 1. Remove the T op Plate. Simply lift it up off of the stove body . It is not fastened. 2. GF 100 D V I I ONL Y : Remov e the Front Plate by lif ting straight up to disengage it from the sides. 3. Remov e the Glass Frame. Disengage the two tru ...

  • Jotul GF 100 DV II, GF 200 DV II - page 31

    31 GF 100 D V II Nordic QT GF 200 D V II Lillehammer 3. Access the lower controls. 4. Depress gas c ont rol knob sligh tly and turn clock - wise to “OFF” . Do not force. FOR Y OUR SAFETY , READ BEFORE LIGHTING . LIGHTING INSTRUCTIONS T O TURN OFF GAS T O THE APPLIANCE: LIGHTING INSTR UCTIONS WARNING: IF Y OU DO NO T FOLLO W THESE INSTRUCTIONS E ...

  • Jotul GF 100 DV II, GF 200 DV II - page 32

    32 GF 100 DV II Nor dic QT GF 200 D V II Lillehammer Jøtul AS P . O . Box 1411 N-1602 Fr edrikstad Norway Jøtul North America 55 Hutcherson Drive Gorham, Maine 04038-2634 August 2005 138003 D This appliance must be installed in conformance with local and national building regula tions. Before beginning the installation, it is impor tant that the ...

Fabbricante Jotul Categoria Electric Heater

I documenti che otteniamo dal fabbricante del dispositivoJotul GF 100 DV II, GF 200 DV II possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Jotul
- manuali per l’uso GF 100 DV II, GF 200 DV II
- schede prodotto Jotul
- opuscoli
- o etichette energetiche Jotul GF 100 DV II, GF 200 DV II
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Jotul GF 100 DV II, GF 200 DV II.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Jotul GF 100 DV II, GF 200 DV II, manuali di manutenzione, brevi manuali o manuali utente Jotul GF 100 DV II, GF 200 DV II. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Jotul GF 100 DV II, GF 200 DV II.

Manuali per l’uso simili

Manuale completo del dispositivo Jotul GF 100 DV II, GF 200 DV II, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Jotul GF 100 DV II, GF 200 DV II dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Jotul GF 100 DV II, GF 200 DV II.

Il manuale per l’uso completo Jotul, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Jotul GF 100 DV II, GF 200 DV II - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Jotul GF 100 DV II, GF 200 DV II, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Jotul GF 100 DV II, GF 200 DV II che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Jotul GF 100 DV II, GF 200 DV II - che ci dovrebbe aiutare nei primi passi durante l'uso Jotul GF 100 DV II, GF 200 DV II
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Jotul GF 100 DV II, GF 200 DV II
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Jotul GF 100 DV II, GF 200 DV II in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Jotul GF 100 DV II, GF 200 DV II?

Utilizza il modulo sottostante

Se non hai risolto il problema con Jotul GF 100 DV II, GF 200 DV II con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Jotul GF 100 DV II, GF 200 DV II è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)