Italiano dropdown-ico

Manuale per l’uso Daewoo DSC-34W70N

61 pagine 1.07 mb
Scarica

Vai alla pagina of 61

Summary
  • Daewoo DSC-34W70N - page 1

    USER MANUAL HDTV Monitor DSC-34W70N ...

  • Daewoo DSC-34W70N - page 2

    The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user t ...

  • Daewoo DSC-34W70N - page 3

    IMPORT ANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIP- MENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television equipment from the wall outlet before cleaning. Do not use ...

  • Daewoo DSC-34W70N - page 4

    13 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. ...

  • Daewoo DSC-34W70N - page 5

    CONTENTS 5 PREP ARA TION •CONNECTING ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 •NAME OF EACH P ART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 B ...

  • Daewoo DSC-34W70N - page 6

    CON NECTING ANTENNA NOTE: Bad picture reception could often be caused by bad antenna connection. Be sure to check the antenna direction, its height, etc. In case of using single antenna cable In case of using two separate antenna cables VIDEO 1 S-VIDEO VIDEO AUDIO VIDEO 2 L R Y Pb Pr L R DTV INPUT VIDEO AUDIO L R VIDEO AUDIO Y Cb Cr DVD INPUT MONIT ...

  • Daewoo DSC-34W70N - page 7

    NAME OF EACH P ART 7 Front and Side of TV set •The buttons installed on the front of the TV set is functioning as same as those on the Remote Control. 1. Timer Indicator Lights up red when you have set the HDTV Monitor’s automatic timers. 2. Power Indicator Lights up green when you have turned the HDTV Monitor on. 3. Remote Control Signal Senso ...

  • Daewoo DSC-34W70N - page 8

    8 On the right side panel of the HDTV Monitor , you will find the V ideo 3 inputs and Headphone jack. These are provided to connect a camcorder or other video equipment without reaching around to the rear panel. HEADPHONE : provides a connection for headphones. Side panel inputs ...

  • Daewoo DSC-34W70N - page 9

    REMOTE CONTROL BUTT ONS 9 L L Caution! • Do not drop. • Avoid moisture, heat, and dust. L L Installation of batteries: • Push to open the cover of the Remote Control. • Set the batteries in the battery (cell), compartment after checking the electrodes(+,–), and then, shut the cover. • ( )Number in the blank serves as an address; it show ...

  • Daewoo DSC-34W70N - page 10

    10 Under the Cover of Remote Control To use the buttons under the cover Note: •When batteries are low, the Remote Control may not work. Change them immediately when they get weak. •Be sure to use two 1.5V size AAA batteries. •Do not use new batteries together with the old ones. PIP SEARCH Simultaneous window selection is possible through the ...

  • Daewoo DSC-34W70N - page 11

    T O W A TCH TV PROGRAM 11 Buttons on the front of the TV set have the same functions as those of the REMOTE CONTROL. B Press two number buttons of the Remote Control to select a channel directly. The numbers should be in digits. Examp.) To select channel 9, press “0” and “9” It may take some time to get to the channel when only “9” is p ...

  • Daewoo DSC-34W70N - page 12

    12 1.Press the “TV POWER”button. •The TV screen will illuminate, and the power indicator lamp will light up green. 2.Press the “CHANNEL” buttons. •Press the “CHANNEL x / y ” or number buttons to select the channel you want. Ex) Ch 7 3.Adjust the V olume. •When the “ VOLUME C ” button is pressed, the volume decreases. •When t ...

  • Daewoo DSC-34W70N - page 13

    13 1.Press “MENU” button. •The main menu will appear . 2.Select “Setup”. •Move the cursor to the “Setup ” menu by using “ VOLUME C / B ” buttons. •Select “Setup ” sub-menu by using “ CHANNEL x ” button. 3.Select Auto Program by using “ CHANNEL x x / y y ” buttons. •The following picture will appear on the screen ...

  • Daewoo DSC-34W70N - page 14

    14 4.Press “ VOLUME C / B ” buttons. Automatic Channel Memory function (Auto Program) starts. •Checking from channel 2 to channel 69,(Cable1~125) this function automatically memorizes only those channels which are actually broadcasting. •When “MENU” button is pressed during the setup process, the setup operation quits. •When the memor ...

  • Daewoo DSC-34W70N - page 15

    15 1.Select a channel. •Select a channel by pressing number buttons. Ex) Ch 13 2.Choose to add or erase from memory . •Press the “ADD/ERASE” Button. •Whenever this button is pressed, the color of channel sign changes from green to red, and vice versa. Capture the Channel sign on green color •When a channel is memorized, its color turns ...

  • Daewoo DSC-34W70N - page 16

    Press “WIDE” button. •When “WIDE” button is pressed, the aspect ratio of the screen shifts cyclically as follows : (16:9) (4:3) (Panorama) (16:9) 16 1.Press “TV/CA TV” button. •The reception mode shifts from “AIR” to “CABLE”. 2.Select a channel. •Select a channel by pressing either number buttons 0 - 9 or 100. •When the ...

  • Daewoo DSC-34W70N - page 17

    17 1 .Connect the video cable to the VIDEO socket at the back or the side of TV set, and press “TV/VIDEO” button on the remote control. •The screen changes to video mode as follows: •Whenever this button is pressed, the screen shifts in sequence : TV Video1 Video2 Video3 DVD TV W atching V ideo Programs Video1 2 .When this button is pressed ...

  • Daewoo DSC-34W70N - page 18

    1.Press “PIP” button once. •Single PIP appears on the screen. ADJUSTING TWO PROGRAM WINDOWS 18 2.Press “PIP” button once more. •The operating program window becomes the main window and moves to the left side of the screen; an auxiliary window appears on the right side at the same time. •Use “CHANNEL x / y ” buttons to control the ...

  • Daewoo DSC-34W70N - page 19

    V ARIOUS FUNCTIONS OF SIMUL T ANEOUS WINDOW MODE 19 2.Select “Funtion” button. •Move the cursor to the “Funtion” menu by using “VOLUME C / B ” buttons. •Select “Funtion” Sub-menu by using “CHANNEL x ” button. 3.Select “PIP”. •Move the blue bar to the PIP menu by using “CHANNEL x / y ” buttons. Then the screen appea ...

  • Daewoo DSC-34W70N - page 20

    20 4. Press “ VOLUME C / B ” buttons, and select the window mode you want. •When the “VOLUME C / B ” buttons are pressed, the screen shifts in the following order: Single PIP Picture T win picture Multi-picture(4) Off, and vice versa. •The MENU mode disappears in 15 seconds automatically when there is no “MENU” button operation, and ...

  • Daewoo DSC-34W70N - page 21

    21 1.Press “PIP” button. •Y ou can enjoy two window programs simultaneously . •The same channel or child lock channel can not be operated in both windows of the screen. 2.Select a channel you want to watch in the auxiliary window . •Select a channel you want to watch in the auxiliary window by using “CHANNEL x / y ” buttons on the Sim ...

  • Daewoo DSC-34W70N - page 22

    22 4.Press “PIP” button again. •PIP mode changes to twin windows. 5. Press “PIP” button again, and the auxiliary window disappears. •Whenever the “PIP” button is pressed, the screen mode changes cyclically as follows: 11 Air 7 Mono 11 Air 9 Mono Air 9 Mono Air 7 Mono 11 Air 9 Mono 11 ...

  • Daewoo DSC-34W70N - page 23

    23 1.Press “SEARCH” button. •Four windows appear on the screen. Memorized channels are connected one-by- one to each window in sequence; thus it is easy to check the contents of the programs on air . •Whenever the “SEARCH” button is pressed, the screen changes cyclically as follow: •Press “SEARCH” button. Then, four windows will a ...

  • Daewoo DSC-34W70N - page 24

    24 1.Press “POSITION” button. •Display auxiliary windows on the screen by pressing “PIP” buttons. •Press “POSITION” button. Every time it is pressed, the locations of auxiliary windows change as follows: •The search sign “ B ” in 4 Windows mode shifts its location as follows: •In Twin Windows mode, the “POSITION” button ...

  • Daewoo DSC-34W70N - page 25

    25 Press “SW AP” button. •View the auxiliary window by pressing “PIP” button. •Press “SW AP” button. Every time it is pressed, the mode of the main and that of the auxiliary windows will swap locations as follows: This function also operates in T win Windows mode. •When the system is in T win Windows mode 1 (4 : 3), the T win Wind ...

  • Daewoo DSC-34W70N - page 26

    26 Changing Window Modes is also Possible in Multi-W indows Search. • The window with “ B ” sign not only becomes the new main window , but also the auxiliary window . Air 7 Mono 9 11 13 Air 9 Mono 9 11 13 B B Air 9 Mono 7 11 13 B Making Pause Auxiliary Windows. •This function makes the auxiliary window programs pause temporarily . •When ...

  • Daewoo DSC-34W70N - page 27

    •The following picture will appear on the screen. 1. Press “MENU” button. •The screen appears as follows: ADJUSTING VOLUME OF AN AUXILIAR Y WINDOW 27 L Sound of either the main window or an auxiliary window is available through headphones. L Volume control of an auxiliary window is possible only with headphones. L Sound of an auxiliary wind ...

  • Daewoo DSC-34W70N - page 28

    OPEN FUNCTION MENU 28 1. Press “MENU” button. •The screen appears as shown: •The following picture will appear on the screen: 3. Press “CHANNEL x x / y y ” buttons. •“Sound” mode is selected, and the sub-menu appears. •Continue to press “CHANNEL x / y ” buttons, and the selected sub-menu sign changes into blue color in the f ...

  • Daewoo DSC-34W70N - page 29

    ADJUSTING THE PICTURE 29 1. Press “AUT O PICTURE” button. •The following pictures appear on the screen in sequence, and the picture adjustment state is changed. <For pressing “AUTO PICTURE” button once> <For pressing “AUTO PICTURE” button many times> 2. Use this mode and get quality pictures on the screen. •Starting from ...

  • Daewoo DSC-34W70N - page 30

    30 1. Press “MENU” button. •The screen appears as follows : 2. Select “Picture” by using “CHANNEL x x ” button. •Move the cursor to the “Picture” menu by using “CHANNEL x ” button. 3. Press “CHANNEL x x / y y ” buttons. •When “Picture” mode is selected, its sub-menu appears on the screen. •Continue to press “CH ...

  • Daewoo DSC-34W70N - page 31

    31 1.Press “MENU” button. •Then the screen appears as follows: 2.Select “Picture” by using “CHANNEL x x ” button. •“Picture” mode is selected, and its sub-menu appears. •Continue to press “CHANNEL x / y ” buttons, and the selected sub-menu sign changes into a blue bar in the following sequence : Brightness Contrast Sharpne ...

  • Daewoo DSC-34W70N - page 32

    4. Adjust “Brightness” by using “VOLUME C C / B B ” buttons •Press “VOLUME B ” button for the Brightness to in crease. •Press “VOLUME C ” button for the Brightness to decrease. Brightness 32 Contrast 60 Sharpness 32 Color 32 Tint 32:32 Picture NR Off 32 3. Adjust “T int” by using “VOLUME C C / B B ” buttons. •Press “ ...

  • Daewoo DSC-34W70N - page 33

    ADJUSTING THE SOUND 33 1. Press “MENU” button. •Then, the screen appears as follows : 2. Select “Sound” menu by using “VOLUME C C / B B ” buttons. •Move the cursor to the “Sound” menu by using “VOLUME C / B ” buttons. •Press “CHANNEL x ” button. •Then, “Sound” menu and its sub-menu appears. 3. Select “Equalizer ...

  • Daewoo DSC-34W70N - page 34

    34 4. Select Range of Sound by using “VOLUME C C / B B ” buttons. •“CHANNEL x ” strengthens the selected range of sound. •“CHANNEL y ” weakens the range of sound. •Signal bar (-) moves up and down showing the selected sound range. •The selected range of sound looks pale blue, and the range not selected looks white. Equalizer Adj ...

  • Daewoo DSC-34W70N - page 35

    1.Press “MTS” button. •Whenever this button is pressed the mode status shifts in the following sequence: Mono Stereo SAP . •Press “RECALL” button on the Remote Control to check the program transmission mode. •When the program transmission is in stereo mode, select “Stereo” to receive the stereo sound. •If the quality of stereo s ...

  • Daewoo DSC-34W70N - page 36

    3. Press “CHANNEL x x / y y ” buttons. •“Function” mode is selected, and the sub-menu appears. •Press “CHANNEL x / y ” buttons until the blue bar indicates “T imer”. AUT OMA TIC POWER ON/OFF 36 1. Press “MENU” button. •The screen appears as shown : 2. Select “Function” by using “VOLUME C C / B B ” buttons. •Move ...

  • Daewoo DSC-34W70N - page 37

    37 4. Set up the Curent T ime. •Press “VOLUME C / B ” buttons, and the screen appears as shown in the left figure: •Press “CHANNEL x / y ” buttons, and the letters “AM 1:00” will turn in blue. •Set up the present time by using “VOLUME C / B ” buttons. •Keep pressing the “CHANNEL x / y ” buttons. The set up time will cont ...

  • Daewoo DSC-34W70N - page 38

    38 1. Press “MENU” button. •Then, the screen will appear as follows : 2. Select “Function” by using “VOLUME C C / B B ” buttons. •Move the cursor to the “Function” menu by using “VOLUME C / B ” buttons. •Press “CHANNEL x ” button. 3. Press “CHANNEL x x / y y ” buttons. •Then “Function” mode is selected, and i ...

  • Daewoo DSC-34W70N - page 39

    5. Set up “On T imer”. •Press “CHANNEL x / y ” buttons, and the letters AM - - : - - will turn blue. •Set up “On T imer” by using “VOLUME C / B ” buttons •Keep pressing the “VOLUME C / B ” buttons, then, the set up time will continue to change by unit of one minute until the button is released. Ex) Set up the time to turn ...

  • Daewoo DSC-34W70N - page 40

    40 7. Set up the “Off Timer”. •Press “CHANNEL x / y ” buttons, and the letters “AM - - : - -” will turn blue. •Set up “Of f T imer” by using “VOLUME C / B ” buttons. •Keep pressing the “VOLUME C / B ” buttons, then the set up time will continue to change by unit of one minute until the button is released. Ex) Set up th ...

  • Daewoo DSC-34W70N - page 41

    3.Press “CHANNEL x x / y y ” buttons. •Select language (as shown) highlighted with the blue function indicator bar . SPECIAL FUNCTIONS 41 1.Press “MENU” button. •The main menu will appear as shown in this example: 2.Select “Function”. •Move the cursor to the “Function” menu using “VOLUME C / B ” buttons. •Press “CHANNE ...

  • Daewoo DSC-34W70N - page 42

    4. Select the language using “VOLUME C C / B B ” buttons. •Press this button, and the On-Screen language changes in the following order : English Francais Español English 42 5.Press “MENU” button. •Press this button once, and the main menu window will appear . •Press it again, and the previous menu window returns. Timer PIP Caption O ...

  • Daewoo DSC-34W70N - page 43

    43 1.Press “MENU” button. •The main menu will appear . 2.Select “Set Up”. •Move the cursor to the “Set Up” menu using “VOLUME C / B ” buttons. •Press “CHANNEL x ” button to select set up, and the sub menu will appear . 3.Press “CHANNEL x x / y y ” buttons. •Highlight Ch Edit(as shown). Fine T uning Channels Move Sel. ...

  • Daewoo DSC-34W70N - page 44

    44 4.Select “Fine” to fine tune. •Highlight “Fine”. •Press “VOLUME C / B ” buttons to fine the channel. •Keep pressing “VOLUME C / B ” buttons until the channel is as clear as possible. •T o fine tune another channel, first, select the channel, then repeat the steps above. When finished, press the “Menu” button until the ...

  • Daewoo DSC-34W70N - page 45

    45 1.Press “MENU” button. •The main menu will appear . 2.Select “Function” by using “VOLUME C C / B B ” buttons. •Move the cursor to the “Function” menu using “VOLUME C / B ” buttons. •Press “CHANNEL x ” button to select function, and the sub menu will appear . 3.Press “CHANNEL x x / y y ” buttons. •Highlight “ ...

  • Daewoo DSC-34W70N - page 46

    46 4.Select an appropriate mode. •Press “VOLUME B ” button, and the mode will change in the following order: Off CC1 CC2 CC3 CC4 Off 5.Press “MENU” button twice. •Press this button once, and the menu window will appear . •Press it again, and you will get the previous status of the menu window . Timer PIP Caption CC1 Language English C ...

  • Daewoo DSC-34W70N - page 47

    47 1.Press “MENU” button. •The main menu will appear . 2.Select “Function”. •Move the cursor to the “Function” menu using “VOLUME C / B ” buttons. •Press “CHANNEL x ” button to select “Function”, and the sub menu will appear . 3.Select “Child Lock”. •Highlight “Child Lock”. •Press “VOLUME B ” to select. ...

  • Daewoo DSC-34W70N - page 48

    4.Enter your password. •Use the number buttons(0-9) to enter your password. Note, if this is the your time using the “Parental Control” menu, be certain to remember it, after entering your password, or keep a written copy stored as you would with any confidential info. •The “Parental Lock” feature will be selected. Use the “ C VOL B ? ...

  • Daewoo DSC-34W70N - page 49

    • The “No Rating” item toggles between “Unblock” and “Block”. This item determines whether or not to block the programs which are not rated by “Movie Ratings” and “TV Guidelines”. Use “VOL C / B ” buttons to change the settings. •The “Set Password” item lets you change the password for entering “Parental Control” ...

  • Daewoo DSC-34W70N - page 50

    PRO LOGIC SETTINGS 50 1.Press “MENU” button. •The main menu will appear . 2.Select “Special”. •Move the cursor to the “Special”, menu using “VOLUME C / B ” buttons. •Press “CHANNEL x ” button to select “Special”, and the sub menu will appear . 3.Select “Pro Logic”. •“Pro Logic” should be highlighted. •Press ...

  • Daewoo DSC-34W70N - page 51

    51 1. Press “MENU” button. • The main menu will appear . 2. Select “Special”. • Move the cursor to the “Special” menu using “VOLUME C / B ” buttons. • Press “CHANNEL x ” button. 3. Select “Tilt” • Press “CHANNEL x / y ” buttons to select “T ilt” 4. Adjust “T ilt” functions using “VOLUME C C / B B ” bu ...

  • Daewoo DSC-34W70N - page 52

    52 DTV Input Selection 1.Press “MENU” button. •The main menu will appear . Move Sel. Exit Picture 2.Select “Special”. •Move the cursor to the “Special” menu using “VOLUME C / B ” buttons. • Press “CHANNEL V ” button to select “Special”, and the sub menu will appear . Move Sel. Exit Special 3.Select “DTV”. •Press ...

  • Daewoo DSC-34W70N - page 53

    53 CONNECTING EQUIPMENTS VIDEO INPUT 1 ANTENNA IN S-VIDEO VIDEO AUDIO L R Y Pb Pr L R VIDEO AUDIO L R VIDEO AUDIO Y Cb Cr VIDEO MONITOR OUTPUT SURROUND OUTPUT L W R AUDIO L R VIDEO INPUT 2 DTV INPUT DVD INPUT VIDEO INPUT 1 ANTENNA IN S-VIDEO VIDEO AUDIO L R Y Pb Pr L R VIDEO AUDIO L R VIDEO AUDIO Y Cb Cr VIDEO MONITOR OUTPUT SURROUND OUTPUT L W R A ...

  • Daewoo DSC-34W70N - page 54

    54 VIDEO INPUT 1 ANTENNA IN S-VIDEO VIDEO AUDIO L R Y Pb Pr L R VIDEO AUDIO L R VIDEO AUDIO Y Cb Cr VIDEO MONITOR OUTPUT SURROUND OUTPUT L W R AUDIO L R VIDEO INPUT 2 DTV INPUT DVD INPUT Y Pb Pr L R HD Component Output T o connect a HD component, follow the diagram below . VIDEO INPUT 1 ANTENNA IN S-VIDEO VIDEO AUDIO L R Y Pb Pr L R VIDEO AUDIO L R ...

  • Daewoo DSC-34W70N - page 55

    55 Subwoofer Left Rear Speaker Right Rear Speaker VIDEO INPUT 1 ANTENNA IN S-VIDEO VIDEO AUDIO L R Y Pb Pr L R VIDEO AUDIO L R VIDEO AUDIO Y Cb Cr VIDEO MONITOR OUTPUT SURROUND OUTPUT L W R AUDIO L R VIDEO INPUT 2 DTV INPUT DVD INPUT Camcoder (Video Camera and Recoder) S-VIDEO Audio R Audio L Video Camcorder The Video3 inputs on the side of the HDT ...

  • Daewoo DSC-34W70N - page 56

    56 PROGRAMMING THE REMOTE CONTROL The HDTV Monitor is remote control is pre-programmed to operate your HDTV Monitor . However , you can also program the HDTV Monitor ’s remote control to operate other components, such as Cable TV BOX, or VCR. 1. Confirm that the external component is plugged in and turned off. 2. Find your component’ s list of ...

  • Daewoo DSC-34W70N - page 57

    ABC 004 006 007 041 POST NEWS WEEK 019 044 048 055 PRUCER 094 ANTRONIX 017 PTS 014 050 070 071 ARCHER 008 010 017 027 095 096 CABLE ST AR 029 PULSAR 054 CENTURION 084 RCA 049 CENTUR Y 010 REGAL 051 052 057 091 CITIZEN 010 092 093 COLOR VOICE 064 083 REGENCY 059 COMBANO 076 077 REMBRANT 028 COMTRONICS 022 033 SAMSUNG 001 033 067 DIAMOND 026 SCIENTIF ...

  • Daewoo DSC-34W70N - page 58

    58 VCR Brand Code ADMIRAL 164 AIW A 033 AKAI 017 040 042 100 101 1 15 158 AMPRO 068 ANAM 030 032 081 AUDIO DYNAMICS 013 023 037 040 166 BROKSONIC 034 036 102 CALIFORNIA AUDIO 123 CANON 027 030 032 CAPEHART 086 CRAIG 005 038 108 CURTIS MA THES 030 032 155 159 DAEWOO 001 007 009 012 060 061 086 088 090 094 095 096 DA YTRON 086 DBX 013 023 037 040 166 ...

  • Daewoo DSC-34W70N - page 59

    59 TROUBLESHOOTING T r o u b l e s h o o t i n g: Neither picture nor sound: •Is power code plugged in? •Press power button on the front of TV. •If the red power light is on, press the remote control power button. Red power light should be green. Picture is OK, but no sound: • Check if “Volume Down” is pressed. • Check if the “Volum ...

  • Daewoo DSC-34W70N - page 60

    Rear RF Antenna Input NTSC A/V In (Video/L/R) 2each NTSC A/V In (S-Video/V ideo/L/R) 1each NTSC A/V Monitor Out (Video/L/R) 1each HD Component In (Y/Pb/Pr/L/R) 1each DVD Component In (Y/Cb/Cr/L/R) 1each Surround Channel Outputs (SL/SR) 1each Sub Woofer Output 1each Side NTSC A/V In (S-Video/V ideo/L/R) 1each Headphone (L/R) 1each 60 SPECIFICA TIONS ...

  • Daewoo DSC-34W70N - page 61

    P/N:48586120E105-R1 ...

Fabbricante Daewoo Categoria Flat Panel Television

I documenti che otteniamo dal fabbricante del dispositivoDaewoo DSC-34W70N possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Daewoo
- manuali per l’uso DSC-34W70N
- schede prodotto Daewoo
- opuscoli
- o etichette energetiche Daewoo DSC-34W70N
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Daewoo DSC-34W70N.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Daewoo DSC-34W70N, manuali di manutenzione, brevi manuali o manuali utente Daewoo DSC-34W70N. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Daewoo DSC-34W70N.

Manuali per l’uso simili

Manuale completo del dispositivo Daewoo DSC-34W70N, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Daewoo DSC-34W70N dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Daewoo DSC-34W70N.

Il manuale per l’uso completo Daewoo, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Daewoo DSC-34W70N - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Daewoo DSC-34W70N, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Daewoo DSC-34W70N che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Daewoo DSC-34W70N - che ci dovrebbe aiutare nei primi passi durante l'uso Daewoo DSC-34W70N
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Daewoo DSC-34W70N
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Daewoo DSC-34W70N in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Daewoo DSC-34W70N?

Utilizza il modulo sottostante

Se non hai risolto il problema con Daewoo DSC-34W70N con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Daewoo DSC-34W70N è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)