Manuale per l’uso Weslo WATL27105.1

23 pagine 1.86 mb
Scarica

Vai alla pagina of 23

Summary
  • Weslo WATL27105.1 - page 1

    Model No. W A TL27105.1 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if there are missing or damaged parts, we w ...

  • Weslo WATL27105.1 - page 2

    2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ASSEMBL Y . . . . ...

  • Weslo WATL27105.1 - page 3

    3 1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill on any surfac ...

  • Weslo WATL27105.1 - page 4

    4 2 3. DANGER: A lways unplug the power cord immediately after use, before cleaning the treadmill, and before performing the m aintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing o ther than the procedures in this manual should be pe ...

  • Weslo WATL27105.1 - page 5

    5 BEFORE YOU BEGIN Thank you for selecting the new WESLO ® E-20 tread- mill. The E-20 treadmill of fers an impressive array of features designed to help you achieve your fitness g oals in the convenience and privacy o f yo ur ho me. And when you’re not exercising, the unique E-20 tread mill can be folded up, requiring less than half the floor sp ...

  • Weslo WATL27105.1 - page 6

    6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not d ispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top ...

  • Weslo WATL27105.1 - page 7

    7 3. Hold a Frame Spacer (27) against the right side of the F rame (79) as shown. Insert a 4” Bolt (70) into the indi- cated hole in the Frame Spacer and the Frame. Next, tighten a 3/4” T ek Screw (3) into the Frame Spacer and the Frame. Then, remove the Bolt. Repeat this step on the other side of the Frame. 3 7 0 3 79 27 5. With the help of a ...

  • Weslo WATL27105.1 - page 8

    8 6 . Carefully pull the opposite end of the tape to pull the W ire Harness (60) up through the Right Handrail (59) and out of the hole in the side of the Right Handrail. Remove the tape from the Wire Harness (60). 59 T ape 6 0 6 7. Orient the Crossbar (91) with the large hole at the right of the smaller hole as shown. Set the Crossbar against the ...

  • Weslo WATL27105.1 - page 9

    9 12. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 18). T o pro- tect the floor or carpet, place a mat under the treadmill. 10. Lower the Handrails (53, 59) until they are touching the floor . See 1 ...

  • Weslo WATL27105.1 - page 10

    10 OPERA TION AND ADJUSTMENT THE PRE-LUBRICA TED WALKING BEL T Y our treadmill features a walking belt coated with high-performance lubricant. IMPORT ANT : Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deteri- o rate the walking belt and cause excessive wear . HOW TO PLUG IN THE P ...

  • Weslo WATL27105.1 - page 11

    1 1 FEA TURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the t ouch of a button. As you exercise, the console will display continuous exercise feedback. Y ou can even mea ...

  • Weslo WATL27105.1 - page 12

    12 Insert the key into the console. See HOW T O TURN ON THE POWER on page 1 1. Select the manual mode. When the key is insert- e d, the manual mode will be selected; three zeros will appear in the T ime/Pace zone of the display . If a pro- gram has been selected, remove the key and then reinsert it to select the manual mode. Press the Start button ...

  • Weslo WATL27105.1 - page 13

    13 The T ime/Pace zone of the display will show t he total number of hours that the treadmill h as been used. The Distance zone of the display will show the total number of miles that the walking belt has moved. IMPORT ANT : If a “d” appears in the Speed zone of the display , the console is in the “demo” mode. This mode is intended to be us ...

  • Weslo WATL27105.1 - page 14

    14 Press the Start button or the Speed increase button to start the prog ram. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed set- t ing fo r the progr am. Hold the handrails and begin walking. Each program is divided into 30 one-minute peri- ods. One speed setting is programmed for each peri od. N ...

  • Weslo WATL27105.1 - page 15

    15 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR ST ORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 45 pounds (20 k g) to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the location shown by the arrow at the right. T o decrease the possibility of ...

  • Weslo WATL27105.1 - page 16

    16 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the frame down until it is past the lock pin. Slowly release the lock knob. 2. Hold the frame firmly with both hands, and lower the frame to the floor . Do not drop the f ...

  • Weslo WATL27105.1 - page 17

    17 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see ...

  • Weslo WATL27105.1 - page 18

    18 PROBLEM: The walking belt slows when walked on S OLUTION: a . If an extension cord is needed, use only a 3-conductor , 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD . Using ...

  • Weslo WATL27105.1 - page 19

    19 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physi- cian. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with ...

  • Weslo WATL27105.1 - page 20

    Handrail Bolt (20)–4 F rame Bolt (32)–2 3/8” W asher (66)–2 W Silver Ground Screw (69)–1 3/8” Star W asher (29)–2 2” Bolt (62)–4 2 1/2” Bolt (65)–4 3/8” Nut (13)–4 5/16” Nut (61)–4 1/2” Silver Screw (90)–1 Crossbar Star W asher (93)–2 3/4” T ek Screw (3)–2 5 3/4” Screw (2)–8 Crossbar Screw (92)–2 1” T ...

  • Weslo WATL27105.1 - page 21

    P ART LIST—Model No. W A TL27105.1 R1 105A 1 1 Motor Hood 2 14 3/4” Screw 3 18 3/4” T ek Screw 4 5 8” Cable T ie 5 4 1” T ek Screw 6 1 W arning Decal, Console 7 3 Cable T ie Clamp 8 2 Foot Rail 9 4 Isolator 10 4 Front Platform Screw 1 1 3 Rear Roller Star W asher 12 2 Incline Leg W asher 13 3 Wheel Nut 14 2 Belt Guide 15 4 Belt Guide Scre ...

  • Weslo WATL27105.1 - page 22

    61 13 21 21 32 7 4 96 96 22 24 25 26 19 56 76 27 3 47 16 3 10 3 18 51 3 18 39 27 3 8 10 3 3 79 14 73 77 74 72 87 15 80 82 81 83 43 82 81 85 49 43 64 87 80 14 15 8 1 3 3 12 12 41 40 40 62 68 13 63 5 2 57 36 59 46 61 9 60 70 29 62 65 65 65 10 10 31 35 86 32 32 33 63 5 62 63 5 69 70 29 65 66 66 75 1 1 68 13 58 9 9 9 53 63 5 62 2 32 32 2 48 44 42 37 13 ...

  • Weslo WATL27105.1 - page 23

    Part No. 232938 R1 105A Printed in Canada © 2005 ICON IP , Inc. LIMITED W ARRANTY Shanghai Newlife Fitness Equipment, Inc. (Newlife), warrants this product to be free from defects in work - manship and material under normal use and service conditions. The drive motor is warranted for five (5) years after the date of purchase. Parts and labor are w ...

Fabbricante Weslo Categoria Treadmill

I documenti che otteniamo dal fabbricante del dispositivoWeslo WATL27105.1 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Weslo
- manuali per l’uso WATL27105.1
- schede prodotto Weslo
- opuscoli
- o etichette energetiche Weslo WATL27105.1
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Weslo WATL27105.1.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Weslo WATL27105.1, manuali di manutenzione, brevi manuali o manuali utente Weslo WATL27105.1. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Weslo WATL27105.1.

Manuali per l’uso simili

Manuale completo del dispositivo Weslo WATL27105.1, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Weslo WATL27105.1 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Weslo WATL27105.1.

Il manuale per l’uso completo Weslo, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Weslo WATL27105.1 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Weslo WATL27105.1, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Weslo WATL27105.1 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Weslo WATL27105.1 - che ci dovrebbe aiutare nei primi passi durante l'uso Weslo WATL27105.1
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Weslo WATL27105.1
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Weslo WATL27105.1 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Weslo WATL27105.1?

Utilizza il modulo sottostante

Se non hai risolto il problema con Weslo WATL27105.1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Weslo WATL27105.1 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)