-
Polycom DOC2558C - page 1
Po l y c o m ® RMX ® 2000 Hardware Guide Ve r s i o n 7.0.2 | November 2010 | DOC2558C ...
-
Polycom DOC2558C - page 2
T rademark Information P olycom®, the P olycom “T riangles” logo, and th e names and marks associated with P olycom ’s products are trademarks and/or service marks of P olycom, Inc., and are registered and/or common-law marks in the Un ited States and various oth er countries. All other trademarks are the property of th eir respective owners ...
-
Polycom DOC2558C - page 3
Regulatory Notices United St a tes Federal Communicatio n Commission (FCC) Part 15: Class A St atement. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. T est limits are designed to provide reasonable protection against harmful interference when the equipment is o ...
-
Polycom DOC2558C - page 4
Compliant with European Battery Directiv e 2006/66/EC T o comply with the European Battery Directive 2006/ 66/EC, dispose of weak and wor n out batteries in accordance with local and national regulations. Chinese Communication C ertificate Singapore Certificate Complies with IDA standards DA101619 Ta i w a n Russian Communication C ertificate The P ...
-
Polycom DOC2558C - page 5
Polycom RMX 2000 Hardware Guide i T able of Content s Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Main Features ..................... .............. .............. .............. .............. ............. 1-1 RMX 2000 Specifications .... ............... .............. ................. .............. ....... 1-2 ...
-
Polycom DOC2558C - page 6
T able of Contents ii Replacing the CNTL Module ...... ................. .............. ................. 1-31 Replacing the Power Supply Module ............................. ........... 1-33 Replacing the Fan Drawer ......................... ................. .............. ... 1-34 Replacing a Faulty MPM/MPM+/MPMx Card ...................... 1-35 ...
-
Polycom DOC2558C - page 7
1 Hardware Description This Hardware Guide provides information on the RMX 2000 and its components. This system utilizes a modular “universal slot” platform, whose components are designed for high performance, capacity and reliance. Main Features The Polycom RMX 2000 offers the following features: •L i n u x ® b a s e d • Chassis based on ...
-
Polycom DOC2558C - page 8
Chapter 1- Hardware Description 1-2 RMX 2000 Specifications T ab le 1-1 Polycom RMX 2000 Specifications Physical Height 3U (13.25 cm.) Width 19” (48.26 cm.) Depth 15.74” (40 cm.) Weight Up to 16.5 Kg. Media Protocols Audio G .71 1, G . 719, G . 722, G .722.1, G .729A, G .723.1, Siren14, Siren 22. Video H.261, H.263, H.264. Network Interfaces IP ...
-
Polycom DOC2558C - page 9
Polycom RMX 2000 Hard ware Guide 1-3 RMX 2000 System Capacities Conferencing Capacities The following table summarizes the di fferent conferencing capacities. T ab le 1-2 System Functions and Capacities RMX 2000 System Functions MPM Mode MP M+ Mode MPMx Mode Maximum number of Video parti ci p ants in a confer en ce 80 160 180 Maximum number of PSTN ...
-
Polycom DOC2558C - page 10
Chapter 1- Hardware Description 1-4 Maximum number of Recording Links 20 (default) 20 (default) 20 (default) Maximum number of IVR Video Slides 150 150 1 50 Maximum number of Log Files (1Mb max.) 4000 4000 4000 Maximum number of CDR Files 2000 20 00 4000 Maximum number of Fault Files 1000 1000 1000 Number of Participant alerts Unlimited Unlimited U ...
-
Polycom DOC2558C - page 11
Polycom RMX 2000 Hard ware Guide 1-5 R esource Capacities The following table summarizes the reso urce capacities for a fully loaded system per card type per reso lution in CP conferencing mode T ab le 1-3 System Resource Capacities per Resolution per Card T ype in CP Audio/V ideo and Resolution Resources with MPM Resources with MPM+ Resources with ...
-
Polycom DOC2558C - page 12
Chapter 1- Hardware Description 1-6 The following table summari zes the resource capacities for a fu lly loaded system per card type per line rate in VSW conferencing mode T able 1-4 System Resource Capacities p er Line Rate per Ca rd T ype in VSW Audio/Video and Resolution Resources with MPM Resources with MPM+ Resources with MPMx VSW 2Mb 80 160 1 ...
-
Polycom DOC2558C - page 13
Polycom RMX 2000 Hard ware Guide 1-7 Site R equirements This section describes the requirements your site must meet for safe installation and operation of the system. Safety R equirements For your protection, please read th ese safety instructions completely before operating the equipment. • Look carefully for potential hazards in your work area: ...
-
Polycom DOC2558C - page 14
Chapter 1- Hardware Description 1-8 • In a single rack installation, stabiliz ers should be attached to the rack. • In multiple rack installations, the racks shou ld be coupled together. • Always make sure the rack is st able before extending a component from the rack. • You should extend only one component at a time - extending two or more ...
-
Polycom DOC2558C - page 15
Polycom RMX 2000 Hard ware Guide 1-9 RMX 2000 Components On the RMX 2000 components are located on both the front a nd rear of the MCU as listed in Table 1-5, " Polycom RMX 2000 C omponent Description" . For more information see the descriptions o f the " RMX 2000 Front Panel” on page 1-9 and " RMX 2000 Rear Panel” on page 1 ...
-
Polycom DOC2558C - page 16
Chapter 1- Hardware Description 1-10 T able 1-5 Polycom RMX 2000 Component De scrip tion Component Descriptio n CNTL (CPU) Module The CNTL mo dule controls and manages the RMX 2000. The CNTL module has an ComExpress Pen tiu m-M 1.4GHz processor , a 40GB hard disk drive, 1GB Compact Flash and 1GB of DDR RAM. The Operating System is Linux. Power Supp ...
-
Polycom DOC2558C - page 17
Polycom RMX 2000 Hard ware Guide 1-11 Multi Processor Module+ (MPM+) Card The MPM+ cards, perform the various RTP , audio and video processing functions on the RMX 2000 unit. TI C6455 processors are at the core of each MPM+ card which are available in the fol lowing assemblies: • MPM+20 (20 CIF resources) • MPM+40 (40 CIF resources) • MPM+80 ...
-
Polycom DOC2558C - page 18
Chapter 1- Hardware Description 1-12 RMX 2000 R ear Panel The RMX 2000 rear panel contains th e RTM IP card and optionally, the RTM ISDN card. The RTM IP card must be located on the bottom slot in the rear of the RMX 2000. In addition, the rear panel houses the main power switch, AC inlet, a circuit breaker , and additional communication s ports. R ...
-
Polycom DOC2558C - page 19
Polycom RMX 2000 Hard ware Guide 1-13 The following items appear on the RMX 2000 rear panel: T ab le 1-6 RMX 2000 Rear Panel - RTM IP Component Description Item Descriptio n LAN 1 NA - Disconnected. Note: LAN 1 is covered with a plas tic cap that should not be removed. LAN 2 Used for the Network connection. LAN 3 F or Remote Access only using the A ...
-
Polycom DOC2558C - page 20
Chapter 1- Hardware Description 1-14 RTM ISDN The RTM ISDN card connects directly to an MPM/MPM+/MPMx. The RTM ISDN card routes data bet ween the MPM/MPM+/MPM x cards and components of the system, converts IS DN T1/E1 medi a to IP packets an d provides connectivity to external ISDN networks. The RTM ISDN card is installed on th e rear panel of the ...
-
Polycom DOC2558C - page 21
Polycom RMX 2000 Hard ware Guide 1-15 ISDN/PSTN Clock Source Each RTM ISDN card has its own primary and secondary clock source. The first span to synchronize becomes the primary clock source and the second span to synchronize becomes the secondary clock source . This clock is used to synchroni ze ISDN spans only (it i s not the system clock) . A si ...
-
Polycom DOC2558C - page 22
Chapter 1- Hardware Description 1-16 MPM/MPM+ and MPMx Media Cards The RMX unit can work with either MPM or MPM+/MPMx (but not with both simultaneously) medi a cards. The card type installed in the system determines the Card Configuration Mode . MPM+ cards are supported only with D-type chassi s and software version 4.x and later. MPMx cards are su ...
-
Polycom DOC2558C - page 23
Polycom RMX 2000 Hard ware Guide 1-17 Table 3 summarizes the resource capaciti es per line rate per card type in VSW Conferencing Mode. MPM+ Resource Capacities per Card T y pe Assembly The MPM+ card offers increased reso urce capacities and capabilities. Three MPM+ card assemblies are available: MPM+ 80 , MPM+ 40 and MPM+ 20 offering various resou ...
-
Polycom DOC2558C - page 24
Chapter 1- Hardware Description 1-18 MPMx R esource Capacities per Card Assembly The MPMx card offers increased resour ce capacities and capabilities. Two MPM+ card assemblies are available: •M P M x - D •M P M x - S Table 5 summarizes the vide o capacities of the two MPMx card assemblies. MPMx, MPM+ and MPM Modes MPMx, MPM+ and MPM card s inst ...
-
Polycom DOC2558C - page 25
Polycom RMX 2000 Hard ware Guide 1-19 Operating Mode Selection During Startup / Restart When started with Version 7.x installed, the RMX enters MPMx M ode by default when no media cards are installed. System Information Changes The System Information includes License Information , and general system information, such as system memory size and Media ...
-
Polycom DOC2558C - page 26
Chapter 1- Hardware Description 1-20 Example 1: Current status • An RMX has two MPM cards installed. •T h e Card Configuration Mod e is MPM . • Both MPM cards are enabled . Action 1. Remove one MPM card. 2. Inser t one MPMx card. Result •T h e Card Configuration Mod e remains MPM . •T h e r e m a i n i n g MPM card remains enabled . •T ...
-
Polycom DOC2558C - page 27
Polycom RMX 2000 Hard ware Guide 1-21 • The remaining MPM card is disabled . Example 2: Current status • An RMX has one MPMx card installed . •T h e Card Configuration Mode is MPMx . •a n d t h e MPMx card is enable d . Action 1. Remove the MPM x card. 2. Insert one MPM card. Result •T h e Card Configuration Mode remains MPMx . •T h e i ...
-
Polycom DOC2558C - page 28
Chapter 1- Hardware Description 1-22 RMX 2000 LEDs The RMX includes LEDs located on the front panel and rear panel. In the front panel, the LEDs reflect the state of the components. The LEDs on th e rear panel indicate the state of the ex ter nal connections and the status of the RTM IP card. RMX 2000 Front Panel LEDs The following items appear on ...
-
Polycom DOC2558C - page 29
Polycom RMX 2000 Hard ware Guide 1-23 MPM/MPM+ Card ERR Red ON - Major error on card. Flashes - During card startup. RDY Green ON - The card has completed startup success fully . Flashes - During card startup. ACT Amber ON - At least one participant is connected to a con ference. Flashes - During card startup. HS Blue Flashes - Shut down process in ...
-
Polycom DOC2558C - page 30
Chapter 1- Hardware Description 1-24 CNTL Unit ERR Re d ON - Major sys tem error . In case of an active alarm this light is ON, and the RDY green is OFF . OFF - Normal. Flashes - During system st artup. RDY Green ON - CPU card has successfully completed startup. This light turns green after completing the entire system configuration. OFF - T urns O ...
-
Polycom DOC2558C - page 31
Polycom RMX 2000 Hard ware Guide 1-25 RMX 2000 R ear Panel LEDs RTM IP The following LEDs appear on the RTM IP card: T ab le 1-2 RMX 2000 RTM IP LEDs Component LED Name LED Color Description LAN LEDs (1-3) LNK Green ON with an active network connection, flickers with Packet activity . 1 Gb Amber ON with a 1Gb o nline connection, flickers with Packe ...
-
Polycom DOC2558C - page 32
Chapter 1- Hardware Description 1-26 ShMG LEDs ERR Red ON - Ma jor error on RTM card. Flashes - During system startup. ACT Red ON - Packet flow to and fr om the MCU chassis . Flashes - During system startup. RDY Green ON - RTM IP card has successfully completed st artup. Flashes - During system startup. HS Blue OFF - Norma l. Flashes - Duri ng powe ...
-
Polycom DOC2558C - page 33
Polycom RMX 2000 Hard ware Guide 1-27 RTM ISDN The following LEDs appear on the RTM ISD N: T ab le 1-3 RMX 2000 RTM ISDN LEDs Function Name LED Name LED Color Description LAN LED (1) LNK Green ON with an active network connection, flickers with Packet activity . 1 Gb Amber ON when 1Gb connection is online, flickers with Packet activity . ShMC LEDs ...
-
Polycom DOC2558C - page 34
Chapter 1- Hardware Description 1-28 RMX Chassis T ypes The RMX chassis can be of type A/B/C or D. The environmentally friendly D-ty pe chassis (indi cated by the letter D in the Part Number) is required for use with MPM+ card(s). The chassis type can be viewed in the Hardware Monitor, by right clicking Slot 0 and then clicking Properties. The RMX ...
-
Polycom DOC2558C - page 35
Polycom RMX 2000 Hard ware Guide 1-29 Component R eplacement The RMX 2000 is designed with ease of maintenance in mind. Most components are swappable and are acce ssible directly vi a the front pane l or the rear panel. The following components can be re placed when they are faulty: • CNTL Module, see " Replacing the CNTL Module” on page 1 ...
-
Polycom DOC2558C - page 36
Chapter 1- Hardware Description 1-30 T ypes of Ejector Leve rs on RMX Components On the RMX, 2 types of ejector levers can be attached to the cards: • An all metal (silver) lever • A modified PMC compatible ejecto r lever covered by plastic caps with a lock catch Using the All Metal Ejector Lever This ejector lever can be moved to 3 positions: ...
-
Polycom DOC2558C - page 37
Polycom RMX 2000 Hard ware Guide 1-31 • Partia lly Open - For card powering down mode. Partially open the ejector lever(s) until the blue HS LEDs on the card and the Control Unit start flashing. When the HS LED is constantly lit the card is in a powered down mode and you can remove the card. • Fully Open - In th is position the card is released ...
-
Polycom DOC2558C - page 38
Chapter 1- Hardware Description 1-32 5 On the CNTL Module to be installed, move the ejector lever to the fully open position. 6 Slide in the replacement CNTL Module. 7 Push the CNTL Module firmly into the Backpl ane, making sure it is properly seated in its slot. 8 Ensure that the metal ejector leve rs are full y retracted into their housings. 9 Ti ...
-
Polycom DOC2558C - page 39
Polycom RMX 2000 Hard ware Guide 1-33 R eplacing the Power Supply Module A single supply unit powers the RM X 2000. Use the following procedure to replace a Power Supply: 1 Ensure that the power switch on th e RMX 2000 is turned OFF (O) and that the power cords are disconnected from the MCU. 2 Unscrew the captive screws on the front panel of the RM ...
-
Polycom DOC2558C - page 40
Chapter 1- Hardware Description 1-34 R eplacing the Fan Drawer Three fans are mounted in the Fan drawer, where the airflow is from right to left. Should one of these fans fail as indicated by a Fan LED, you are required to replace the Fan drawe r. 1 Unscrew the captive screws on the front panel of the RMX 2000 that secure the Fan drawer. 2 Use the ...
-
Polycom DOC2558C - page 41
Polycom RMX 2000 Hard ware Guide 1-35 R eplacing a Faulty MPM/MPM+/MPMx Card R emoving the MPM/MPM+/M PMx Card from the MCU All MPM/MPM+/MPMx cards can be instal led or removed while the RMX 2000 is powered on and operating. Prior to removing an MPM/MPM+/MPMx card the captive scr ews must be unscrewed and the ejector levers mu st be opened to initi ...
-
Polycom DOC2558C - page 42
Chapter 1- Hardware Description 1-36 5 Carefully slide the MPM/MPM+/MPMx card out through the front panel. Installing the R eplacement MPM/MPM+/MPMx Card 1 On t he ca rd to b e in st all ed, mov e th e ejector levers to their fully open position. 2 Slide in the replacement MP M/MPM+/MPMx card. 3 Push the MPM/MPM+/MPM x card firmly into the Backplan ...
-
Polycom DOC2558C - page 43
Polycom RMX 2000 Hard ware Guide 1-37 The blue HS LEDs on the MPM/MPM+/MPMx card and t he Control Unit start flashi ng and the power on cycle for the card is in itiated: — The card’s resources are added to the system resources list — The number of available ports on the RMX is increased to the current CFS license level — Port usage is re-ca ...
-
Polycom DOC2558C - page 44
Chapter 1- Hardware Description 1-38 6 Slide in the replacement RTM ISDN card. 7 Insert the card into the slot until the ejector levers touch the front edge of the card cage. 8 Push the ejector levers to their fully closed position. 9 Tighten the captive screws on each side of the re ar panel of the card, securing the RTM ISDN card to RMX. 10 Turn ...
-
Polycom DOC2558C - page 45
Polycom RMX 2000 Hard ware Guide 1-39 R eplacing the RTM IP Card The RTM IP card on the rear of the RMX 2000 provides connectivity to all the MCU modules. Use the following procedure to replace the RTM IP card: 1 Ensure that the power switch on the RMX 2000 is turned OFF (O). 2 Unscrew the captive screws on the rear panel of the RMX 2000 that secur ...
Hai una domanda su Polycom DOC2558C?
Utilizza il modulo sottostante
Se non hai risolto il problema con Polycom DOC2558C con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Polycom DOC2558C è probabile che voglia condividere il modo di risolverlo.